diff --git a/admin/i18n/cn/translations.json b/admin/i18n/cn/translations.json
index 49ea21d..84970e9 100644
--- a/admin/i18n/cn/translations.json
+++ b/admin/i18n/cn/translations.json
@@ -1,11 +1,11 @@
 {
-  "General": "General",
-  "Inputs": "Discrete Inputs",
+  "General": "基本",
+  "Inputs": "离散输入",
   "Do not align addresses to word:": "Do not align addresses to 16 bits:",
-  "Coils": "Coils",
-  "Input Registers": "Input Registers",
-  "Holding Registers": "Holding Registers",
-  "PLC Connection:": "PLC Connection:",
+  "Coils": "线圈",
+  "Input Registers": "输入寄存器",
+  "Holding Registers": "保持寄存器",
+  "PLC Connection:": "PLC 连接:",
   "PLC IP Address:": "PLC IP Address:",
   "PLC Rack:": "PLC Rack:",
   "PLC Slot:": "PLC Slot:",
@@ -18,25 +18,25 @@
   "Import DB file:": "Import DB file:",
   "Load Symbols": "Load symbols",
   "Add DB": "Add DB",
-  "Toggle poll": "Toggle poll",
-  "Toggle RW": "Toggle RW",
-  "Toggle WP": "Toggle WP",
-  "Address": "Address",
-  "Name": "Name",
-  "Description": "Description",
-  "Type": "Type",
-  "Unit": "Unit",
+  "Toggle poll": "切换 poll",
+  "Toggle RW": "切换 RW",
+  "Toggle WP": "切换 WP",
+  "Address": "地址",
+  "Name": "名称",
+  "Description": "说明",
+  "Type": "类型",
+  "Unit": "单位",
   "poll": "poll",
   "RW": "RW",
   "CW": "CW",
   "WP": "WP",
-  "Role": "Role",
-  "Room": "Room",
-  "registers": "registers",
-  "Device ID:": "Device ID:",
+  "Role": "规则",
+  "Room": "场景",
+  "registers": "寄存器",
+  "Device ID:": "Modbus站 ID:",
   "RTU over TCP": "RTU over TCP",
-  "Data bits:": "Data bits:",
-  "Stop bits:": "Stop bits:",
+  "Data bits:": "数据位:",
+  "Stop bits:": "停止位:",
   "Parity:": "Parity:",
   "Read timeout:": "Read timeout:",
   "Multi device IDs:": "Multi device IDs:",
@@ -45,30 +45,30 @@
   "Enable polling of data point": "Enable polling of data point",
   "Write access allowed": "Write access allowed",
   "Write pulses (true=>false edge)": "Write pulses (true=>false edge)",
-  "Connection parameters:": "Connection parameters:",
-  "Partner IP Address:": "Partner IP Address:",
-  "Port:": "Port:",
-  "Type:": "Type:",
-  "Master": "Master",
-  "Slave": "Slave",
-  "Are you sure?": "Are you sure?",
-  "Start address:": "Start address:",
-  "Text copied to clipboard. Click to close the window": "Text copied to clipboard. Click to close the window",
-  "Export": "Export",
-  "Import": "Import",
-  "Close": "Close",
-  "Export to CSV": "Export to CSV",
-  "Import from CSV": "Import from CSV",
-  "Delete all entries": "Delete all entries",
-  "Length": "Length",
-  "All entries will be deleted. Are you sure?": "All entries will be deleted. Are you sure?",
+  "Connection parameters:": "连接参数",
+  "Partner IP Address:": "IP Address:",
+  "Port:": "端口:",
+  "Type:": "类型:",
+  "Master": "主机",
+  "Slave": "从机",
+  "Are you sure?": "你确定吗?",
+  "Start address:": "开始地址:",
+  "Text copied to clipboard. Click to close the window": "文本已经复制到剪贴板",
+  "Export": "导出",
+  "Import": "导入",
+  "Close": "关闭",
+  "Export to CSV": "导出成 CSV文件",
+  "Import from CSV": "从 CSV文件导入",
+  "Delete all entries": "删除所有的点位数据",
+  "Length": "长度",
+  "All entries will be deleted. Are you sure?": "所有的点位数据都将被删除，你确定吗?",
   "Factor": "Factor",
-  "Offset": "Offset",
+  "Offset": "偏移",
   "Cyclic write": "Cyclic write",
   "TCP/Serial RTU:": "TCP/Serial RTU:",
   "TCP": "TCP",
-  "Serial": "Serial",
-  "Baud rate:": "Baud rate:",
+  "Serial": "串口",
+  "Baud rate:": "波特率:",
   "Use direct addresses by aliases:": "Use direct addresses by aliases:",
-  "Select port": "Select port"
+  "Select port": "端口"
 }
\ No newline at end of file