{
  "General": "基本",
  "Inputs": "离散输入",
  "Do not align addresses to word:": "Do not align addresses to 16 bits:",
  "Coils": "线圈",
  "Input Registers": "输入寄存器",
  "Holding Registers": "保持寄存器",
  "PLC Connection:": "PLC 连接:",
  "PLC IP Address:": "PLC IP Address:",
  "PLC Rack:": "PLC Rack:",
  "PLC Slot:": "PLC Slot:",
  "Round Real to:": "Round real to:",
  "Poll delay:": "Poll delay:",
  "deviceId": "Slave ID",
  "Reconnect time:": "Reconnect time:",
  "Pulse time:": "Pulse time:",
  "Import symbols file:": "Import symbols file:",
  "Import DB file:": "Import DB file:",
  "Load Symbols": "Load symbols",
  "Add DB": "Add DB",
  "Toggle poll": "切换 poll",
  "Toggle RW": "切换 RW",
  "Toggle WP": "切换 WP",
  "Address": "地址",
  "Name": "名称",
  "Description": "说明",
  "Type": "类型",
  "Unit": "单位",
  "poll": "poll",
  "RW": "RW",
  "CW": "CW",
  "WP": "WP",
  "Role": "规则",
  "Room": "场景",
  "registers": "寄存器",
  "Device ID:": "Modbus站 ID:",
  "RTU over TCP": "RTU over TCP",
  "Data bits:": "数据位:",
  "Stop bits:": "停止位:",
  "Parity:": "Parity:",
  "Read timeout:": "Read timeout:",
  "Multi device IDs:": "Multi device IDs:",
  "Use aliases as address:": "Use aliases:",
  "Max read request length:": "Max read request length:",
  "Enable polling of data point": "Enable polling of data point",
  "Write access allowed": "Write access allowed",
  "Write pulses (true=>false edge)": "Write pulses (true=>false edge)",
  "Connection parameters:": "连接参数",
  "Partner IP Address:": "IP Address:",
  "Port:": "端口:",
  "Type:": "类型:",
  "Master": "主机",
  "Slave": "从机",
  "Are you sure?": "你确定吗?",
  "Start address:": "开始地址:",
  "Text copied to clipboard. Click to close the window": "文本已经复制到剪贴板",
  "Export": "导出",
  "Import": "导入",
  "Close": "关闭",
  "Export to CSV": "导出成 CSV文件",
  "Import from CSV": "从 CSV文件导入",
  "Delete all entries": "删除所有的点位数据",
  "Length": "长度",
  "All entries will be deleted. Are you sure?": "所有的点位数据都将被删除，你确定吗?",
  "Factor": "Factor",
  "Offset": "偏移",
  "Cyclic write": "Cyclic write",
  "TCP/Serial RTU:": "TCP/Serial RTU:",
  "TCP": "TCP",
  "Serial": "串口",
  "Baud rate:": "波特率:",
  "Use direct addresses by aliases:": "Use direct addresses by aliases:",
  "Select port": "端口"
}