xpp: improved waitfor_xpds

* Fix an issue due to long firmware load time:
  - When one Astribank has an echo canceler (long firmware loading) and
    and another one does not.
  - The EC-less Astribank finishes initialization before the Astribank
    with EC is detected.
  - Thus waitfor_xpds terminates too early.

* We now iteratively build two sets of serial numbers:
  - One from wha we see in all Xorcom (e4e4:11[3456]x) USB devices.
  - The other is those that were detected in the driver.
  - Only when the two sets are equal (and > 0) we know we are done.
  - This is resilient to many problems (e.g: disconnect/reconnect of
    same device during initialization).

* The progress output was also improved: Now each detected AB
  show the total number so far.

* The timeout was also increased to 100sec

* Woraround for an Astribank with no serial (but just a single one on
  the system).

Signed-off-by: Oron Peled <oron.peled@xorcom.com>
Acked-by: Tzafrir Cohen <tzafrir.cohen@xorcom.com>

Origin: http://svnview.digium.com/svn/dahdi?view=rev&rev=10465

git-svn-id: http://svn.astersk.org/svn/dahdi/tools/branches/2.6@10737 17933a7a-c749-41c5-a318-cba88f637d49

.gitignore

@@ -1,79 +0,0 @@
-*~
-*.o
-*.lo
-*.a
-*.so
-*.la
-.*.o.d
-.*.lo.d
-*.asciidoc
-*.html
-.deps
-.libs
-.dirstamp
-.version
-/.pc
-Makefile
-Makefile.in
-auxdir/
-build_tools/menuselect-deps
-aclocal.m4
-autom4te.cache/
-autoconfig.h
-autoconfig.h.in
-config.log
-config.status
-config.guess
-config.ignore
-configure
-dahdi_cfg
-dahdi_diag
-dahdi_maint
-dahdi_monitor
-dahdi_pcap
-dahdi_scan
-dahdi_speed
-dahdi_test
-dahdi_tool
-fxotune
-fxstest
-genconf_parameters.sample
-hdlcgen
-hdlcstress
-hdlctest
-hdlcverify
-libtool
-m4/
-makeopts
-patgen
-patlooptest
-pattest
-sethdlc
-stamp-h1
-timertest
-tonezone.lo
-tonezones.txt
-version.c
-xpp/*.check
-xpp/.depend
-xpp/.octasic.depend
-xpp/.perlcheck
-xpp/astribank_allow
-xpp/astribank_hexload
-xpp/astribank_is_starting
-xpp/astribank_tool
-xpp/dahdi_genconf.8
-xpp/dahdi_hardware.8
-xpp/dahdi_registration.8
-xpp/lsdahdi.8
-xpp/test_parse
-xpp/twinstar.8
-xpp/xpp_blink.8
-xpp/xpp_sync.8
-xpp/xtalk/xlist_test
-xpp/xtalk/xtalk_raw_test
-xpp/xtalk/xtalk_send
-xpp/xtalk/xtalk_test
-xpp/xtalk/xusb_test
-xpp/xtalk/xusb_test_bypath
-zonedata.lo

Makefile

@@ -0,0 +1,430 @@
+#
+# Makefile for DAHDI tools
+#
+# Copyright (C) 2001-2010 Digium, Inc.
+#
+#
+
+# If the file .dahdi.makeopts is present in your home directory, you can
+# include all of your favorite menuselect options so that every time you download
+# a new version of Asterisk, you don't have to run menuselect to set them.
+# The file /etc/dahdi.makeopts will also be included but can be overridden
+# by the file in your home directory.
+
+GLOBAL_MAKEOPTS=$(wildcard /etc/dahdi.makeopts)
+USER_MAKEOPTS=$(wildcard ~/.dahdi.makeopts)
+
+ifeq ($(strip $(foreach var,clean distclean dist-clean update,$(findstring $(var),$(MAKECMDGOALS)))),)
+ ifneq ($(wildcard menuselect.makeopts),)
+  include menuselect.makeopts
+ endif
+endif
+
+ifeq ($(strip $(foreach var,clean distclean dist-clean update,$(findstring $(var),$(MAKECMDGOALS)))),)
+ ifneq ($(wildcard makeopts),)
+  include makeopts
+ endif
+endif
+
+SUBDIRS_UTILS_ALL:= ppp
+SUBDIRS_UTILS := xpp
+
+OPTFLAGS=-O2
+CFLAGS+=-I. $(OPTFLAGS) -g -fPIC -Wall -DBUILDING_TONEZONE #-DTONEZONE_DRIVER
+ifneq (,$(findstring ppc,$(UNAME_M)))
+CFLAGS+=-fsigned-char
+endif
+ifneq (,$(findstring x86_64,$(UNAME_M)))
+CFLAGS+=-m64
+endif
+
+ifeq ($(DAHDI_DEVMODE),yes)
+  CFLAGS+=-Werror -Wunused -Wundef $(DAHDI_DECLARATION_AFTER_STATEMENT) -Wmissing-format-attribute -Wformat-security #-Wformat=2
+endif
+
+ROOT_PREFIX=
+
+# extra cflags to build dependencies. Recursively expanded.
+MAKE_DEPS= -MD -MT $@ -MF .$(subst /,_,$@).d -MP
+
+CFLAGS+=$(DAHDI_INCLUDE)
+
+CHKCONFIG	:= $(wildcard /sbin/chkconfig)
+UPDATE_RCD	:= $(wildcard /usr/sbin/update-rc.d)
+ifeq (,$(DESTDIR))
+  ifneq (,$(CHKCONFIG))
+    ADD_INITD	:= $(CHKCONFIG) --add dahdi
+  else
+    ifneq (,$(UPDATE_RCD))
+      ADD_INITD	:= $(UPDATE_RCD) dahdi defaults 15 30
+    endif
+  endif
+endif
+
+INITRD_DIR	:= $(firstword $(wildcard $(DESTDIR)/etc/rc.d/init.d $(DESTDIR)/etc/init.d))
+ifneq (,$(INITRD_DIR))
+  INIT_TARGET	:= $(INITRD_DIR)/dahdi
+  COPY_INITD	:= install -D dahdi.init $(INIT_TARGET)
+endif
+
+RCCONF_FILE	= /etc/dahdi/init.conf
+MODULES_FILE	= /etc/dahdi/modules
+GENCONF_FILE	= /etc/dahdi/genconf_parameters
+MODPROBE_FILE	= /etc/modprobe.d/dahdi.conf
+BLACKLIST_FILE	= /etc/modprobe.d/dahdi.blacklist.conf
+
+NETSCR_DIR	:= $(firstword $(wildcard $(DESTDIR)/etc/sysconfig/network-scripts ))
+ifneq (,$(NETSCR_DIR))
+  NETSCR_TARGET	:= $(NETSCR_DIR)/ifup-hdlc
+  COPY_NETSCR	:= install -D ifup-hdlc $(NETSCR_TARGET)
+endif
+
+ifneq ($(wildcard .version),)
+  TOOLSVERSION:=$(shell cat .version)
+else
+ifneq ($(wildcard .svn),)
+  TOOLSVERSION=$(shell build_tools/make_version . dahdi/tools)
+endif
+endif
+
+LTZ_A:=libtonezone.a
+LTZ_A_OBJS:=zonedata.o tonezone.o version.o
+LTZ_SO:=libtonezone.so
+LTZ_SO_OBJS:=zonedata.lo tonezone.lo version.o
+LTZ_SO_MAJOR_VER:=2
+LTZ_SO_MINOR_VER:=0
+
+# sbindir, libdir, includedir and mandir are defined in makeopts
+# (from configure).
+BIN_DIR:=$(sbindir)
+LIB_DIR:=$(libdir)
+INC_DIR:=$(includedir)/dahdi
+MAN_DIR:=$(mandir)/man8
+CONFIG_DIR:=$(sysconfdir)/dahdi
+CONFIG_FILE:=$(CONFIG_DIR)/system.conf
+
+# Utilities we build with a standard build procedure:
+UTILS		= dahdi_tool dahdi_test dahdi_monitor dahdi_speed sethdlc dahdi_cfg \
+		  fxstest fxotune dahdi_diag dahdi_scan
+
+# some tests:
+UTILS		+= patgen pattest patlooptest hdlcstress hdlctest hdlcgen \
+		   hdlcverify timertest dahdi_maint
+
+BINS:=fxotune fxstest sethdlc dahdi_cfg dahdi_diag dahdi_monitor dahdi_speed dahdi_test dahdi_scan dahdi_tool dahdi_maint
+BINS:=$(filter-out $(MENUSELECT_UTILS),$(BINS))
+MAN_PAGES:=$(wildcard $(BINS:%=doc/%.8))
+
+TEST_BINS:=patgen pattest patlooptest hdlcstress hdlctest hdlcgen hdlcverify timertest dahdi_maint
+# All the man pages. Not just installed ones:
+GROFF_PAGES	:= $(wildcard doc/*.8 xpp/*.8)
+GROFF_HTML	:= $(GROFF_PAGES:%=%.html)
+
+GENERATED_DOCS	:= $(GROFF_HTML) README.html README.Astribank.html
+
+all: menuselect.makeopts 
+	@$(MAKE) _all
+
+_all: prereq programs
+
+libs: $(LTZ_SO) $(LTZ_A)
+
+utils-subdirs:
+	@for dir in $(SUBDIRS_UTILS); do \
+		$(MAKE) -C $$dir; \
+	done
+
+programs: libs utils
+
+utils: $(BINS) utils-subdirs
+
+version.c: FORCE
+	@TOOLSVERSION="${TOOLSVERSION}" build_tools/make_version_c > $@.tmp
+	@if cmp -s $@.tmp $@ ; then :; else \
+		mv $@.tmp $@ ; \
+	fi
+	@rm -f $@.tmp
+
+tests: $(TEST_BINS)
+
+$(UTILS): %: %.o
+
+$(UTILS): version.o
+
+%.o: %.c
+	$(CC) $(CFLAGS) $(MAKE_DEPS) -c -o $@ $<
+
+%.lo: %.c
+	$(CC) $(CFLAGS) $(MAKE_DEPS) -c -o $@ $<
+
+%: %.o
+	$(CC) $(LDFLAGS) $^ $(LIBS) -o $@
+
+prereq: config.status
+
+dahdi_tool: CFLAGS+=$(NEWT_INCLUDE)
+dahdi_tool: LIBS+=$(NEWT_LIB)
+
+dahdi_speed: CFLAGS+=-O0
+
+$(LTZ_A): $(LTZ_A_OBJS)
+	ar rcs $@ $^
+	ranlib $@
+
+$(LTZ_SO): $(LTZ_SO_OBJS)
+	$(CC) $(CFLAGS) -shared -Wl,-soname,$(LTZ_SO).$(LTZ_SO_MAJOR_VER).$(LTZ_SO_MINOR_VER) -o $@ $^ -lm
+
+dahdi_cfg: $(LTZ_A)
+dahdi_cfg: LIBS+=-lm
+dahdi_pcap:
+	$(CC) $(CFLAGS) dahdi_pcap.c -lpcap -o $@ $<
+	
+
+fxstest: $(LTZ_SO)
+fxstest: LIBS+=-lm
+fxotune: LIBS+=-lm
+
+tonezones.txt: zonedata.c
+	perl -ne 'next unless (/\.(country|description) = *"([^"]*)/); \
+		print (($$1 eq "country")? "* $$2\t":"$$2\n");' $<  \
+	>$@
+
+%.asciidoc: %.sample
+	perl -n -e \
+		'if (/^#($$|\s)(.*)/){ if (!$$in_doc){print "\n"}; $$in_doc=1; print "$$2\n" } else { if ($$in_doc){print "\n"}; $$in_doc=0; print "  $$_" }' \
+		$< \
+	| perl -p -e 'if (/^  #?(\w+)=/ && ! exists $$cfgs{$$1}){my $$cfg = $$1; $$cfgs{$$cfg} = 1; s/^/\n[[cfg_$$cfg]]\n/}'  >$@
+
+docs: $(GENERATED_DOCS)
+
+genconf_parameters.sample: xpp/genconf_parameters
+	cp $< $@
+
+README.html: README system.conf.asciidoc init.conf.asciidoc tonezones.txt \
+  UPGRADE.txt genconf_parameters.asciidoc
+	$(ASCIIDOC) -n -a toc -a toclevels=3 $<
+
+README.Astribank.html: xpp/README.Astribank
+	$(ASCIIDOC) -o $@ -n -a toc -a toclevels=4 $<
+
+# on Debian: this requires the full groof, not just groff-base.
+%.8.html: %.8
+	man -Thtml $^ >$@
+
+htmlman: $(GROFF_HTML)
+
+install: all install-programs
+	@echo "###################################################"
+	@echo "###"
+	@echo "### DAHDI tools installed successfully."
+	@echo "### If you have not done so before, install init scripts with:"
+	@echo "###"
+	@echo "###   make config"
+	@echo "###"
+	@echo "###################################################"
+
+install-programs: install-utils install-libs
+
+install-utils: utils install-utils-subdirs
+ifneq (,$(BINS))
+	install -d $(DESTDIR)$(BIN_DIR)
+	install  $(BINS) $(DESTDIR)$(BIN_DIR)/
+	install -d $(DESTDIR)$(MAN_DIR)
+	install -m 644 $(MAN_PAGES) $(DESTDIR)$(MAN_DIR)/
+endif
+ifeq (,$(wildcard $(DESTDIR)$(CONFIG_FILE)))
+	$(INSTALL) -d $(DESTDIR)$(CONFIG_DIR)
+	$(INSTALL) -m 644 system.conf.sample $(DESTDIR)$(CONFIG_FILE)
+endif
+
+install-libs: libs
+	$(INSTALL) -d -m 755 $(DESTDIR)/$(LIB_DIR)
+	$(INSTALL) -m 755 $(LTZ_A) $(DESTDIR)$(LIB_DIR)/
+	$(INSTALL) -m 755 $(LTZ_SO) $(DESTDIR)$(LIB_DIR)/$(LTZ_SO).$(LTZ_SO_MAJOR_VER).$(LTZ_SO_MINOR_VER)
+ifeq (,$(DESTDIR))
+	if [ `id -u` = 0 ]; then \
+		/sbin/ldconfig || : ;\
+	fi
+endif
+	rm -f $(DESTDIR)$(LIB_DIR)/$(LTZ_SO)
+	$(LN) -sf $(LTZ_SO).$(LTZ_SO_MAJOR_VER).$(LTZ_SO_MINOR_VER) \
+		$(DESTDIR)$(LIB_DIR)/$(LTZ_SO).$(LTZ_SO_MAJOR_VER)
+	$(LN) -sf $(LTZ_SO).$(LTZ_SO_MAJOR_VER).$(LTZ_SO_MINOR_VER) \
+		$(DESTDIR)$(LIB_DIR)/$(LTZ_SO)
+	# Overwrite the 1.0 links out there.  dahdi-tools 2.0.0 installed
+	# 1.0 links but dahdi-tools changed them to 2.0 in order to explicitly
+	# break applications linked with zaptel.  But, this also meant that
+	# applications linked with libtonezone.so.1.0 broke when dahdi-tools
+	# 2.1.0 was installed.
+	$(LN) -sf $(LTZ_SO).$(LTZ_SO_MAJOR_VER).$(LTZ_SO_MINOR_VER) \
+		$(DESTDIR)$(LIB_DIR)/$(LTZ_SO).1.0
+	$(LN) -sf $(LTZ_SO).$(LTZ_SO_MAJOR_VER).$(LTZ_SO_MINOR_VER) \
+		$(DESTDIR)$(LIB_DIR)/$(LTZ_SO).1
+ifneq (no,$(USE_SELINUX))
+  ifeq (,$(DESTDIR))
+	/sbin/restorecon -v $(DESTDIR)$(LIB_DIR)/$(LTZ_SO)
+  endif
+endif
+	$(INSTALL) -d -m 755 $(DESTDIR)/$(INC_DIR)
+	$(INSTALL) -m 644 tonezone.h $(DESTDIR)$(INC_DIR)/
+
+install-utils-subdirs:
+	@for dir in $(SUBDIRS_UTILS); do \
+		$(MAKE) -C $$dir install; \
+	done
+
+install-tests: tests
+ifneq (,$(TEST_BINS))
+	install -d $(DESTDIR)$(BIN_DIR)
+	install  $(TEST_BINS) $(DESTDIR)$(BIN_DIR)/
+endif
+
+config:
+ifneq (,$(COPY_INITD))
+	$(COPY_INITD)
+endif
+ifeq (,$(wildcard $(DESTDIR)$(RCCONF_FILE)))
+	$(INSTALL) -D -m 644 init.conf.sample $(DESTDIR)$(RCCONF_FILE)
+endif
+ifeq (,$(wildcard $(DESTDIR)$(MODULES_FILE)))
+	$(INSTALL) -D -m 644 modules.sample $(DESTDIR)$(MODULES_FILE)
+endif
+ifeq (,$(wildcard $(DESTDIR)$(GENCONF_FILE)))
+	$(INSTALL) -D -m 644 xpp/genconf_parameters $(DESTDIR)$(GENCONF_FILE)
+endif
+ifeq (,$(wildcard $(DESTDIR)$(MODPROBE_FILE)))
+	$(INSTALL) -D -m 644 modprobe.conf.sample $(DESTDIR)$(MODPROBE_FILE)
+endif
+ifeq (,$(wildcard $(DESTDIR)$(BLACKLIST_FILE)))
+	$(INSTALL) -D -m 644 blacklist.sample $(DESTDIR)$(BLACKLIST_FILE)
+endif
+ifneq (,$(COPY_NETSCR))
+	$(COPY_NETSCR)
+endif
+ifneq (,$(ADD_INITD))
+	$(ADD_INITD)
+endif
+	@echo "DAHDI has been configured."
+	@echo ""
+	@echo "List of detected DAHDI devices:"
+	@echo ""
+	@if [ `xpp/dahdi_hardware | tee /dev/stderr | wc -l` -eq 0 ]; then \
+		echo "No hardware found"; \
+	else \
+		echo ""; \
+		echo "run 'dahdi_genconf modules' to load support for only " ;\
+		echo "the DAHDI hardware installed in this system.  By "; \
+		echo "default support for all DAHDI hardware is loaded at "; \
+		echo "DAHDI start. "; \
+	fi
+
+update:
+	@if [ -d .svn ]; then \
+		echo "Updating from Subversion..." ; \
+		svn update | tee update.out; \
+		rm -f .version; \
+		if [ `grep -c ^C update.out` -gt 0 ]; then \
+			echo ; echo "The following files have conflicts:" ; \
+			grep ^C update.out | cut -b4- ; \
+		fi ; \
+		rm -f update.out; \
+	else \
+		echo "Not under version control";  \
+	fi
+
+clean:
+	-@$(MAKE) -C menuselect clean
+	rm -f $(BINS) $(TEST_BINS)
+	rm -f *.o dahdi_cfg tzdriver sethdlc
+	rm -f $(LTZ_SO) $(LTZ_A) *.lo
+	@for dir in $(SUBDIRS_UTILS_ALL); do \
+		$(MAKE) -C $$dir clean; \
+	done
+	@for dir in $(SUBDIRS_UTILS); do \
+		$(MAKE) -C $$dir clean; \
+	done
+	rm -f libtonezone*
+	rm -f fxotune
+	rm -f core
+	rm -f dahdi_cfg-shared fxstest
+	rm -rf $(GENERATED_DOCS) *.asciidoc tonezones.txt
+	rm -f dahdi_pcap
+
+distclean: dist-clean
+
+dist-clean: clean
+	@$(MAKE) -C menuselect dist-clean
+	rm -f makeopts menuselect.makeopts menuselect-tree build_tools/menuselect-deps
+	rm -f config.log config.status
+	rm -f .*.d
+
+config.status: configure
+	@CFLAGS="" ./configure
+	@echo "****"
+	@echo "**** The configure script was just executed, so 'make' needs to be"
+	@echo "**** restarted."
+	@echo "****"
+	@exit 1
+
+menuselect.makeopts: menuselect/menuselect menuselect-tree makeopts
+	menuselect/menuselect --check-deps $@ $(GLOBAL_MAKEOPTS) $(USER_MAKEOPTS)
+
+menuconfig: menuselect
+
+cmenuconfig: cmenuselect
+
+gmenuconfig: gmenuselect
+
+nmenuconfig: nmenuselect
+
+menuselect: menuselect/cmenuselect menuselect/nmenuselect menuselect/gmenuselect
+	@if [ -x menuselect/nmenuselect ]; then \
+		$(MAKE) nmenuselect; \
+	elif [ -x menuselect/cmenuselect ]; then \
+		$(MAKE) cmenuselect; \
+	elif [ -x menuselect/gmenuselect ]; then \
+		$(MAKE) gmenuselect; \
+	else \
+		echo "No menuselect user interface found. Install ncurses,"; \
+		echo "newt or GTK libraries to build one and re-rerun"; \
+		echo "'make menuselect'."; \
+	fi
+
+cmenuselect: menuselect/cmenuselect menuselect-tree
+	-@menuselect/cmenuselect menuselect.makeopts $(GLOBAL_MAKEOPTS) $(USER_MAKEOPTS) && echo "menuselect changes saved!" || echo "menuselect changes NOT saved!"
+
+gmenuselect: menuselect/gmenuselect menuselect-tree
+	-@menuselect/gmenuselect menuselect.makeopts $(GLOBAL_MAKEOPTS) $(USER_MAKEOPTS) && echo "menuselect changes saved!" || echo "menuselect changes NOT saved!"
+
+nmenuselect: menuselect/nmenuselect menuselect-tree
+	-@menuselect/nmenuselect menuselect.makeopts $(GLOBAL_MAKEOPTS) $(USER_MAKEOPTS) && echo "menuselect changes saved!" || echo "menuselect changes NOT saved!"
+
+# options for make in menuselect/
+MAKE_MENUSELECT=CC="$(HOST_CC)" CXX="$(CXX)" LD="" AR="" RANLIB="" CFLAGS="" $(MAKE) -C menuselect CONFIGURE_SILENT="--silent"
+
+menuselect/menuselect: menuselect/makeopts
+	+$(MAKE_MENUSELECT) menuselect
+
+menuselect/cmenuselect: menuselect/makeopts
+	+$(MAKE_MENUSELECT) cmenuselect
+
+menuselect/gmenuselect: menuselect/makeopts
+	+$(MAKE_MENUSELECT) gmenuselect
+
+menuselect/nmenuselect: menuselect/makeopts
+	+$(MAKE_MENUSELECT) nmenuselect
+
+menuselect/makeopts: makeopts
+	+$(MAKE_MENUSELECT) makeopts
+
+menuselect-tree: dahdi.xml
+	@echo "Generating input for menuselect ..."
+	@build_tools/make_tree > $@
+
+.PHONY: menuselect distclean dist-clean clean all _all install programs tests devel data config update install-programs install-libs install-utils-subdirs utils-subdirs prereq
+
+FORCE:
+
+ifneq ($(wildcard .*.d),)
+   include .*.d
+endif

Makefile.am

@@ -1,197 +0,0 @@
-ACLOCAL_AMFLAGS	= -I m4
-
-LEGACY_MAKE	= \
-	 $(MAKE) -f $(srcdir)/Makefile.legacy \
-		top_srcdir=$(top_srcdir) \
-		srcdir=$(srcdir)
-
-CFLAGS	+= -g -Wall -O2 $(DAHDI_INCLUDE)
-if DAHDI_DEVMODE
-CFLAGS	+= \
-	-Werror \
-	-Wunused \
-	-Wundef \
-	$(DAHDI_DECLARATION_AFTER_STATEMENT) \
-	-Wmissing-format-attribute \
-	-Wformat-security \
-	#-Wformat=2
-endif
-
-SUBDIRS	= xpp doc hotplug
-
-if PPPD
-SUBDIRS	+= ppp
-endif
-
-noinst_HEADERS	= \
-	bittest.h	\
-	dahdi_tools_version.h	\
-	fxotune.h	\
-	wavformat.h	\
-	#
-
-sbin_PROGRAMS	= \
-	dahdi_test \
-	dahdi_maint \
-	dahdi_monitor \
-	dahdi_cfg \
-	dahdi_speed \
-	dahdi_scan \
-	fxotune
-
-noinst_PROGRAMS	= \
-	fxstest \
-	patgen \
-	pattest \
-	patlooptest \
-	dahdi_diag \
-	timertest
-
-dist_sbin_SCRIPTS	= \
-	dahdi_span_assignments \
-	dahdi_waitfor_span_assignments \
-	dahdi_span_types
-
-if PBX_HDLC
-sbin_PROGRAMS	+= sethdlc
-noinst_PROGRAMS += hdlcstress hdlctest hdlcgen hdlcverify
-endif
-
-# Libtool versioning for libtonezone:
-# Bump when interface changes
-LTZ_CURRENT	= 2
-# Bump if interface change is backward compatible
-LTZ_AGE		= 0
-# Bump if only implementation change
-LTZ_REVISION	= 0
-
-lib_LTLIBRARIES		= libtonezone.la
-
-libtonezone_la_SOURCES	= \
-	zonedata.c \
-	tonezone.c \
-	version.c
-dahdiinclude_HEADERS	= tonezone.h
-libtonezone_la_CFLAGS	= $(CFLAGS) -I$(srcdir) -DBUILDING_TONEZONE
-libtonezone_la_LDFLAGS	= -version-info "$(LTZ_CURRENT):$(LTZ_REVISION):$(LTZ_AGE)"
-libtonezone_la_LIBADD	= -lm
-
-if PBX_PCAP
-noinst_PROGRAMS		+= dahdi_pcap
-dahdi_pcap_LDADD	= -lpcap
-endif
-
-patlooptest_LDADD	= libtonezone.la
-fxstest_LDADD		= libtonezone.la
-fxotune_LDADD		= -lm
-dahdi_speed_CFLAGS	= -O2
-
-dahdi_maint_SOURCES	= dahdi_maint.c version.c
-
-if PBX_NEWT
-sbin_PROGRAMS		+= dahdi_tool
-dahdi_tool_CFLAGS	= $(CFLAGS) $(NEWT_INCLUDE)
-dahdi_tool_LDADD	= $(NEWT_LIB)
-endif
-
-dahdi_cfg_LDFLAGS	= -lpthread
-dahdi_cfg_LDADD		= libtonezone.la
-
-udevrulesdir	= @udevrulesdir@
-udevrules_DATA	= dahdi.rules
-
-all-local:
-	$(LEGACY_MAKE)  all
-
-clean-local:
-	$(LEGACY_MAKE) clean
-
-install-exec-hook:
-	$(LEGACY_MAKE) install
-	@echo "Compatibility symlinks (should be removed in the future)"
-	ln -sf libtonezone.so.2.0.0 $(DESTDIR)$(libdir)/libtonezone.so.2.0
-
-bashcompdir	= $(sysconfdir)/bash_completion.d
-
-install-data-hook:
-	mkdir -p $(DESTDIR)$(bashcompdir)
-	install -m 644 $(srcdir)/dahdi-bash-completion $(DESTDIR)$(bashcompdir)/dahdi
-
-# Handle these files specially -- install them only with 'install-config'
-special_config_files	= \
-	init.conf.sample	\
-	blacklist.sample	\
-	modprobe.conf.sample	\
-	#
-
-install-config:
-	mkdir -p $(DESTDIR)$(dahdiconfdir)
-	mkdir -p $(DESTDIR)$(sysconfdir)/modprobe.d
-	install -m644 xpp/genconf_parameters $(DESTDIR)$(dahdiconfdir)/genconf_parameters
-	install -m644 init.conf.sample $(DESTDIR)$(dahdiconfdir)/init.conf
-	install -m644 blacklist.sample $(DESTDIR)$(sysconfdir)/modprobe.d/dahdi-blacklist.conf
-	install -m644 modprobe.conf.sample $(DESTDIR)$(sysconfdir)/modprobe.d/dahdi.conf
-	$(LEGACY_MAKE) config
-
-dahdiconfdir	= @sysconfdir@/dahdi
-dahdiconf_DATA	= \
-	system.conf.sample	\
-	assigned-spans.conf.sample	\
-	span-types.conf.sample	\
-	modules.sample	\
-	#
-
-build_scripts	= \
-	build_tools/dahdi_svn_tarball	\
-	build_tools/dahdi_sysfs_copy	\
-	build_tools/dump_sys_state	\
-	build_tools/make_firmware_object.in	\
-	build_tools/make_tree	\
-	build_tools/make_version	\
-	build_tools/test_kernel_git	\
-	build_tools/uninstall-modules	\
-	#
-
-.version:
-	if ./build_tools/make_version . dahdi/tools > $@.tmp; then \
-		mv "$@.tmp" "$@"; \
-	fi
-
-uninstall-hook:
-	$(RM) $(DESTDIR)$(sysconfdir)/dahdi/span-types.conf.sample
-	$(RM) $(DESTDIR)$(sysconfdir)/dahdi/assigned-spans.conf.sample
-	$(RM) $(DESTDIR)$(sysconfdir)/dahdi/system.conf
-	$(RM) $(DESTDIR)$(bashcompdir)/dahdi
-
-docs:
-	$(LEGACY_MAKE)  $@
-
-DISTCLEANFILES	= makeopts config.log config.status .*.d
-
-MAINTAINERCLEANFILES	= \
-		m4/libtool.m4 \
-		m4/ltoptions.m4 \
-		m4/ltsugar.m4 \
-		m4/ltversion.m4 \
-		m4/lt~obsolete.m4 \
-		#
-
-EXTRA_DIST	= \
-	.version	\
-	LICENSE	\
-	LICENSE.LGPL	\
-	UPGRADE.txt	\
-	bootstrap.sh	\
-	Makefile.legacy	\
-	dahdi.init	\
-	dahdi.xml	\
-	dahdi_pcap.c	\
-	ifup-hdlc	\
-	dahdi-bash-completion	\
-	$(special_config_files)	\
-	$(dahdiconf_DATA)	\
-	$(udevrules_DATA)	\
-	$(build_scripts)	\
-	#
-
-.PHONY: docs config

Makefile.legacy

@@ -1,133 +0,0 @@
-#
-# Makefile for DAHDI tools
-#
-# Copyright (C) 2001-2010 Digium, Inc.
-#
-#
-
-ifeq ($(strip $(foreach var,clean,$(findstring $(var),$(MAKECMDGOALS)))),)
-endif
-
-ifeq ($(strip $(foreach var,clean,$(findstring $(var),$(MAKECMDGOALS)))),)
- ifneq ($(wildcard makeopts),)
-  include makeopts
- endif
-endif
-
-CHKCONFIG	:= $(wildcard /sbin/chkconfig)
-UPDATE_RCD	:= $(wildcard /usr/sbin/update-rc.d)
-ifeq (,$(DESTDIR))
-  ifneq (,$(CHKCONFIG))
-    ADD_INITD	:= $(CHKCONFIG) --add dahdi
-  else
-    ifneq (,$(UPDATE_RCD))
-      ADD_INITD	:= $(UPDATE_RCD) dahdi defaults 15 30
-    endif
-  endif
-endif
-
-INITRD_DIR	:= $(firstword $(wildcard $(DESTDIR)/etc/rc.d/init.d $(DESTDIR)/etc/init.d))
-ifneq (,$(INITRD_DIR))
-  INIT_TARGET	:= $(INITRD_DIR)/dahdi
-  COPY_INITD	:= install -D dahdi.init $(INIT_TARGET)
-endif
-
-NETSCR_DIR	:= $(firstword $(wildcard $(DESTDIR)/etc/sysconfig/network-scripts ))
-ifneq (,$(NETSCR_DIR))
-  NETSCR_TARGET	:= $(NETSCR_DIR)/ifup-hdlc
-  COPY_NETSCR	:= install -D ifup-hdlc $(NETSCR_TARGET)
-endif
-
-# sbindir, libdir, includedir and mandir are defined in makeopts
-# (from configure).
-LIB_DIR:=$(libdir)
-
-# All the man pages. Not just installed ones:
-GROFF_PAGES	:= $(wildcard doc/*.8 xpp/*.8)
-GROFF_HTML	:= $(GROFF_PAGES:%=%.html)
-
-GENERATED_DOCS	:= $(GROFF_HTML) README.html README.Astribank.html
-
-all:
-
-tonezones.txt: zonedata.c
-	perl -ne 'next unless (/\.(country|description) = *"([^"]*)/); \
-		print (($$1 eq "country")? "* $$2\t":"$$2\n");' $<  \
-	>$@
-
-%.asciidoc: %.sample
-	perl -n -e \
-		'if (/^#($$|\s)(.*)/){ if (!$$in_doc){print "\n"}; $$in_doc=1; print "$$2\n" } else { if ($$in_doc){print "\n"}; $$in_doc=0; print "  $$_" }' \
-		$< \
-	| perl -p -e 'if (/^  #?(\w+)=/ && ! exists $$cfgs{$$1}){my $$cfg = $$1; $$cfgs{$$cfg} = 1; s/^/\n[[cfg_$$cfg]]\n/}'  >$@
-
-docs: $(GENERATED_DOCS)
-
-genconf_parameters.sample: xpp/genconf_parameters
-	cp $< $@
-
-README.html: README system.conf.asciidoc init.conf.asciidoc tonezones.txt \
-  UPGRADE.txt genconf_parameters.asciidoc assigned-spans.conf.asciidoc \
-  span-types.conf.asciidoc
-	TZ=UTC $(ASCIIDOC) -n -a toc -a toclevels=4 $<
-
-README.Astribank.html: xpp/README.Astribank
-	TZ=UTC $(ASCIIDOC) -o $@ -n -a toc -a toclevels=4 $<
-
-# on Debian: this requires the full groff, not just groff-base.
-%.8.html: %.8
-	man -Thtml $^ >$@
-
-htmlman: $(GROFF_HTML)
-
-install: all install-programs
-	@echo "###################################################"
-	@echo "###"
-	@echo "### DAHDI tools installed successfully."
-	@echo "### If you have not done so before, install init scripts with:"
-	@echo "###"
-	@echo "###   make install-config"
-	@echo "###"
-	@echo "###################################################"
-
-install-programs: install-libs
-
-install-libs:
-ifneq (no,$(USE_SELINUX))
-  ifeq (,$(DESTDIR))
-	/sbin/restorecon -v $(DESTDIR)$(LIB_DIR)/$(LTZ_SO)
-  endif
-endif
-
-config:
-ifneq (,$(COPY_INITD))
-	$(COPY_INITD)
-endif
-ifneq (,$(COPY_NETSCR))
-	$(COPY_NETSCR)
-endif
-ifneq (,$(ADD_INITD))
-	$(ADD_INITD)
-endif
-	@echo "DAHDI has been configured."
-	@echo ""
-	@echo "List of detected DAHDI devices:"
-	@echo ""
-	@if [ `xpp/dahdi_hardware | tee /dev/stderr | wc -l` -eq 0 ]; then \
-		echo "No hardware found"; \
-	else \
-		echo ""; \
-		echo "run 'dahdi_genconf modules' to load support for only " ;\
-		echo "the DAHDI hardware installed in this system.  By "; \
-		echo "default support for all DAHDI hardware is loaded at "; \
-		echo "DAHDI start. "; \
-	fi
-
-clean:
-	rm -f *.o tzdriver
-	rm -f core
-	rm -rf $(GENERATED_DOCS) *.asciidoc tonezones.txt
-
-.PHONY: clean all install devel data config install-programs install-libs
-
-FORCE:

README

@@ -15,9 +15,8 @@ dahdi-linux before building dahdi-tools.
 Build System
 ~~~~~~~~~~~~
 GCC and friends. Generally you will need to install the package gcc.
-
-Autotools (autoconf, automake and libtool) are needed if you clone from
-Git.
+There may be cases where you will need a specific version of gcc to build
+kernel modules.
 
 
 Extra Libraries
@@ -25,25 +24,22 @@ Extra Libraries
 Some libraries are needed for extra utilities that are provided with
 DAHDI.
 
-- libusb is needed for building astribank_hexload, needed for firmware
-  loading of the Xorcom Astribank.
+- libusb is needed for building fpga_load, needed for firmware loading of
+  the Xorcom Astribank.
 - libnewt is needed to build the optional but useful utility dahdi_tool.
-- libpcap is needed for building dahdi_pcap.
-- pppd is needed to build the dahdi pppd plugin.
 
 
 Installation
 ~~~~~~~~~~~~
 Note: If using `sudo` to build/install, you may need to add /sbin to your PATH.
 ----------------------------------
-# Only if you cloned from git:
-autoreconf -i
-
 ./configure
+# optional step: select custom configuration:
+#make menuselect
 make
 make install
-# To install some extra configuration files:
-#make install-config
+# To install init scripts and config files:
+#make config
 ----------------------------------
 
 
@@ -55,11 +51,15 @@ There are some make targets that are provided to build or install just
 parts of DAHDI:
 
 . Build targets:
-  - make: Build DAHDI user-space programs and libraries.
-  - make docs: Generate some extra documentation files.
+  - make: Build DAHDI user-space programs. partial
+    targets of it:
+    * make 'utilname': builds 'utilname' alone (e.g: `make dahdi_diag`)
+    * make utils: Build libtonezone.
+    * make libs: Build libtonezone.
 . Install targets:
-  - make install: Install everything
-  - make install-config: install configuration files
+  - make install: Installs user space tools into /usr/sbin/ (TODO - list
+    partial targets)
+  - make config: should be run once to configure 
 
 
 Installation to a Subtree
@@ -75,9 +75,9 @@ This can be useful for any partial install target from the list above.
 
 Options For ./configure
 ^^^^^^^^^^^^^^^^^^^^^^^
-The configure script executes various tests and the build will depend on
-their result. You can pass it --with options and variable settings, for
-instance:
+The configure script various several tests and based on them generates
+some files ( build_tools/menuselect-deps and makeopts). You can pass it
+--with options and variable settings, for instance:
 
   ./configure --without-ncurses CC="gcc-4.10"
 
@@ -116,58 +116,25 @@ The configuration file of the dahdi init.d script is
 /etc/dahdi/init.conf . That file is used to override defaults that are 
 set at the beginning of the init.d script.
 
-/etc/dahdi/assigned-spans.conf
-~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
-Assigns span number and initial channel number for spans in each device.
-Just like system.conf it may be generated with dahdi_genconf:
-
-  dahdi_span_assignments auto
-  dahdi_genconf
-
-It may also be edited manually to allow reserving span and channel
-numbers for specific devices.
-
-/etc/dahdi/span-types.conf
-~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
-Theoretically, this file is similar to assigned-spans.conf. It allows
-setting the type (E1/T1) of a "PRI" span. This cannot be configured
-anywhere else: it needs to be done before the span is assigned as it
-changes the number of channels the span has.
-
-In practice most systems don't mix E1 and T1 and thus this file will
-typically have at most a single wild-card line setting all cards to be
-either E1 or T1.
-
-
 Reference Configuration
 ~~~~~~~~~~~~~~~~~~~~~~~
 Sample system.conf
-^^^^^^^^^^^^^^^^^^
+~~~~~~~~~~~~~~~~~~
 include::system.conf.asciidoc[]
 
 
 Sample init.conf
-^^^^^^^^^^^^^^^^
+~~~~~~~~~~~~~~~~
 include::init.conf.asciidoc[]
 
 
 Sample genconf_parameters
-^^^^^^^^^^^^^^^^^^^^^^^^^
+~~~~~~~~~~~~~~~~~~~~~~~~~
 FIXME: still not properly formatted.
 
 include::genconf_parameters.asciidoc[]
 
 
-Sample assigned-spans.conf
-^^^^^^^^^^^^^^^^^^^^^^^^^^
-include::assigned-spans.conf.asciidoc[]
-
-
-Sample span-types.conf
-^^^^^^^^^^^^^^^^^^^^^^
-include::span-types.conf.asciidoc[]
-
-
 Tonezones
 ~~~~~~~~~
 The file zonedata.c contains the information about the tone zones used
@@ -237,131 +204,6 @@ that is included in the ppp/ subdirectory. To install it:
    CONFIG_HDLC .
 
 
-Initialization
---------------
-This section documents the start up sequence of the DAHDI modules.
-
-There are generally two options: explicit (using an init script) and
-implicit (run from UDEV hook scripts).
-
-Explicit
-~~~~~~~~
-The dahdi init scripts does the following tasks:
-
-* Loading the module dahdi and any other module listed in
-  /etc/dahdi/modules.
-* For xpp (Astribanks) - some specific initializations. See
-  README.Astribank.
-* Runs link:doc/dahdi_cfg.8.html[dahdi_cfg] after all modules were
-  loaded.
-* A number of other tools may need to be run:
-** link:doc/fxotune.8.html[fxotune]
-** dahdihpec_enable
-
-Only at this point Asterisk (or any other user of DAHDI) can be run.
-
-
-Implicit
-~~~~~~~~
-(Also known as "hot-plug" or "pinned-spans". This requires:
-
-* dahdi >= 2.8.0
-* Setting the module parameter auto_assign_spans of dahdi to 0
-* (Recommended) Asterisk >= 12 - which supports "dahdi create channels".
-
-When a device driver of a DAHDI device finishes initialization, it
-creates a dahdi_device kernel object. A dahdi_device represents a single
-DAHDI device (such as a PCI card) and may have several spans. If the
-value of auto_assign_spans is 1 when dahdi_device is created, spans are
-assigned automatically - each new span gets the first available span
-number and range of channels. However if it is set to 0, spans will not
-get assigned, and user space programs need to assign them. The
-low-level interface for doing so is explained in the section "Span
-Assignment" in the README of DAHDI-Linux.
-
-New Devices
-^^^^^^^^^^^
-When a kernel object is created or destroyed, the kernel sends an event
-to user space. Those events are normally handled by udevd. Configurations
-for udevd ("udev rules") may be placed in /etc/udev/rules.d or
-/lib/udev/rules.d. This package installs rules that instruct udevd to
-run the script `/usr/share/dahdi/dahdi_handle_device` on each new
-device, which runs all the scripts in `/usr/share/dahdi/handle_device.d`.
-Those scripts will:
-
-* If `/etc/dahdi/span-types.conf` exists, apply it to the device. It is
- used for E1/T1/J1 settings. See
- <<_sample_span_types_conf,sample span-types.conf>>.
-
-* If `/etc/dahdi/assigned-spans.conf` exists, assign the span according
- to it (if it is not specified there: don't assign it).
- used for E1/T1/J1 settings. See
- <<_sample_assigned_spans_conf,sample assigned-spans.conf>>.
-
-* But if that file does not exist, assign the span to the first
-  available place.
-
-This script mainly uses the commands
-link:doc/dahdi_span_types.8.html[dahdi_span_types] and
-link:doc/dahdi_span_assignments.8.html[dahdi_span_assignments].
-
-DAHDI devices are listed under `/sys/bus/dahdi_devices/devices`.
-
-If you want to disable running this script, add the following line to
-`/etc/dahdi/init.conf`:
-.............................
-DAHDI_UDEV_DISABLE_DEVICES=yes
-.............................
-
-
-New Spans
-^^^^^^^^^
-Once a span is assigned, a kernel object will appear for it. It will be
-listed under its device. As a new kernel object was created, an event is
-sent to udev.
-
-The standard DAHDI udev rules instruct udevd to run the script
-`/usr/share/dahdi/dahdi_span_config` which runs all the scripts in
-`/usr/share/dahdi/span_config.d`. Those script configures the new
-span:
-
-* If system.conf does not exist, generates a temporary configuration
-  for the span using link:doc/dahdi_genconf.8.html[dahdi_genconf
-  system].
-
-* Runs link:doc/dahdi_cfg.8.html[dahdi_cfg] on the new span (using `-S`
-  and -C`).
-
-* Runs `asterisk -rx 'dahdi create channels'` to add the new channels
-  and spans to Asterisk (if they were configured in advance).
-
-If you want to disable running this script, add the following line to
-`/etc/dahdi/init.conf`:
-.............................
-DAHDI_UDEV_DISABLE_SPANS=yes
-.............................
-
-
-New Channels
-^^^^^^^^^^^^
-DAHDI channels have their own representation in the kernel. The standard
-udev rules that dahdi-tools includes for them, however, don't run a
-script for each device. Each DAHDI channel creates a block device file
-at /dev/dahdi/chan/'span'/'rel-chan', where 'span' and 'rel-chan' are
-each three-digit numbers (e.g: 035). 'span' is the span number and
-'rel-chan' is the channel number relative to the span.
-
-The udev rules generate the following extra symlinks under /dev/dahdi:
-
-* /dev/dahdi/'num' - the channel number. As it was originally (but
-  continues beyond 250).
-* /dev/dahdi/devices/'hardware_id'/'rel-span'/'rel-chan' - if the DAHDI
-  device has a hardware ID field, provide listing of the device's span
-  and channels.
-* /dev/dahdi/devices/@'hardware_id'/'rel-span'/'rel-chan' - likewise for
-  the connector field. It has a "@" prefix.
-
-
 include::UPGRADE.txt[]
 
 

assigned-spans.conf.sample

@@ -1,57 +0,0 @@
-#
-# /etc/dahdi/assigned-spans.conf:
-#
-# This file assigns span and channel numbers to dahdi devices
-#
-# Built as a table keyed by <id>:
-#  <id>    <spanspec>....
-#
-# Where:
-#  * The <id> field may be either:
-#         hardware_id
-#         @location
-#         devpath (in sysfs)
-#  * Shell-style globbing is allowed for the <id> field
-#  * There may one or more of <spanspec>
-#  * Each <spanspec> is composed as:
-#    <local_spanno>:<assigned_spanno>:<base_channo>
-#
-# Examples:
-
-# Astribank with two spans:
-#    FXS * 8 channels + 4 digital inputs 2 digital outputs
-#    FXO * 8 channels
-#usb:QA-1		1:1:1
-#usb:QA-1		2:2:15
-
-# Same Astribank in one-liner
-#usb:QA-1		1:1:1 2:2:15
-
-# Astribank with 4*PRI spans and 3*FXS*8 spans
-# Note that channels are NOT globally contigous
-# each span get its own 50 numbers. Also, skip
-# Channel number 250...
-#usb:INT03165		1:1:1	# E1
-#usb:INT03165		2:2:51	# E1
-#usb:INT03165		3:3:151	# E1
-#usb:INT03165		4:4:201	# E1
-#usb:INT03165		5:5:301	# FXS * 8 channels
-#usb:INT03165		6:6:351	# FXS * 8 channels
-#usb:INT03165		7:7:401	# FXS * 8 channels
-
-# Alternatively -- all in one-line
-#usb:INT03165		1:1:1 2:2:51 3:3:151 4:4:201 5:5:301 6:6:351 7:7:401
-
-# Astribank with 4*BRI without hardware_id :-(
-# We use the location on the bus (ie: where it is physically
-# located). Note the '@' prefix that indicate the location key.
-#@usb-0000:00:1d.7-3	1:1:50
-#@usb-0000:00:1d.7-3	2:2:100
-#@usb-0000:00:1d.7-3	3:3:150
-#@usb-0000:00:1d.7-3	4:4:200
-
-# Same configuration with globbing:
-#/sys/*/usb1/1-6/*	1:1:50
-#/sys/*/usb1/1-6/*	2:2:100
-#/sys/*/usb1/1-6/*	3:3:150
-#/sys/*/usb1/1-6/*	4:4:200

autoconfig.h.in

@@ -0,0 +1,114 @@
+/* autoconfig.h.in.  Generated from configure.ac by autoheader.  */
+
+/* Define if your system has the DAHDI headers. */
+#undef HAVE_DAHDI
+
+/* Define if your system has the DAHDI23 headers. */
+#undef HAVE_DAHDI23
+
+/* Define DAHDI23 headers version */
+#undef HAVE_DAHDI23_VERSION
+
+/* Define DAHDI headers version */
+#undef HAVE_DAHDI_VERSION
+
+/* Define to 1 if you have the <inttypes.h> header file. */
+#undef HAVE_INTTYPES_H
+
+/* Define to 1 if you have the <linux/soundcard.h> header file. */
+#undef HAVE_LINUX_SOUNDCARD_H
+
+/* Define to 1 if you have the <memory.h> header file. */
+#undef HAVE_MEMORY_H
+
+/* Define this to indicate the ${NEWT_DESCRIP} library */
+#undef HAVE_NEWT
+
+/* Define to indicate the ${NEWT_DESCRIP} library version */
+#undef HAVE_NEWT_VERSION
+
+/* Define to 1 if you have the `semtimedop' function. */
+#undef HAVE_SEMTIMEDOP
+
+/* Define to 1 if you have the <stdint.h> header file. */
+#undef HAVE_STDINT_H
+
+/* Define to 1 if you have the <stdlib.h> header file. */
+#undef HAVE_STDLIB_H
+
+/* Define to 1 if you have the <strings.h> header file. */
+#undef HAVE_STRINGS_H
+
+/* Define to 1 if you have the <string.h> header file. */
+#undef HAVE_STRING_H
+
+/* Define to 1 if you have the <sys/soundcard.h> header file. */
+#undef HAVE_SYS_SOUNDCARD_H
+
+/* Define to 1 if you have the <sys/stat.h> header file. */
+#undef HAVE_SYS_STAT_H
+
+/* Define to 1 if you have the <sys/types.h> header file. */
+#undef HAVE_SYS_TYPES_H
+
+/* Define to 1 if you have the <unistd.h> header file. */
+#undef HAVE_UNISTD_H
+
+/* Define this to indicate the ${USB_DESCRIP} library */
+#undef HAVE_USB
+
+/* Define to indicate the ${USB_DESCRIP} library version */
+#undef HAVE_USB_VERSION
+
+/* Define to the address where bug reports for this package should be sent. */
+#undef PACKAGE_BUGREPORT
+
+/* Define to the full name of this package. */
+#undef PACKAGE_NAME
+
+/* Define to the full name and version of this package. */
+#undef PACKAGE_STRING
+
+/* Define to the one symbol short name of this package. */
+#undef PACKAGE_TARNAME
+
+/* Define to the home page for this package. */
+#undef PACKAGE_URL
+
+/* Define to the version of this package. */
+#undef PACKAGE_VERSION
+
+/* Define to 1 if you have the ANSI C header files. */
+#undef STDC_HEADERS
+
+/* Enable extensions on AIX 3, Interix.  */
+#ifndef _ALL_SOURCE
+# undef _ALL_SOURCE
+#endif
+/* Enable GNU extensions on systems that have them.  */
+#ifndef _GNU_SOURCE
+# undef _GNU_SOURCE
+#endif
+/* Enable threading extensions on Solaris.  */
+#ifndef _POSIX_PTHREAD_SEMANTICS
+# undef _POSIX_PTHREAD_SEMANTICS
+#endif
+/* Enable extensions on HP NonStop.  */
+#ifndef _TANDEM_SOURCE
+# undef _TANDEM_SOURCE
+#endif
+/* Enable general extensions on Solaris.  */
+#ifndef __EXTENSIONS__
+# undef __EXTENSIONS__
+#endif
+
+
+/* Define to 1 if on MINIX. */
+#undef _MINIX
+
+/* Define to 2 if the system does not provide POSIX.1 features except with
+   this defined. */
+#undef _POSIX_1_SOURCE
+
+/* Define to 1 if you need to in order for `stat' and other things to work. */
+#undef _POSIX_SOURCE

blacklist.sample

@@ -4,7 +4,6 @@
 
 blacklist wct4xxp
 blacklist wcte12xp
-blacklist wcte13xp
 blacklist wct1xxp
 blacklist wcte11xp
 blacklist wctdm24xxp
@@ -12,12 +11,3 @@ blacklist wcfxo
 blacklist wctdm
 blacklist wctc4xxp
 blacklist wcb4xxp
-blacklist wcaxx
-blacklist wcte43x
-
-# Some mISDN drivers may try to attach to cards supported by DAHDI. If you
-# have a card which is *not* supported by DAHDI but supported by one of the
-# below drivers you should feel free to remove it from the blacklist below.
-blacklist hfcmulti
-blacklist netjet
-blacklist hfcpci

build_tools/make_tree

@@ -0,0 +1,7 @@
+#!/bin/sh
+
+echo "<?xml version=\"1.0\"?>"
+echo
+echo "<menu name=\"DAHDI Tools Selection\">"
+cat dahdi.xml
+echo "</menu>"

build_tools/make_version

@@ -1,10 +1,10 @@
 #!/bin/sh
 
 if [ -f ${1}/.version ]; then
-	cat ${1}/.version
+	cat ${1}.version
 elif [ -f ${1}/.svnrevision ]; then
 	echo SVN-`cat ${1}/.svnbranch`-r`cat ${1}/.svnrevision`
-elif [ -d ${1}/.svn ]; then
+elif [ -d .svn ]; then
     PARTS=`LANG=C svn info ${1} | grep URL | awk '{print $2;}' | sed -e s:^.*/svn/${2}/:: | sed -e 's:/: :g'`
     BRANCH=0
     TEAM=0
@@ -53,72 +53,4 @@ elif [ -d ${1}/.svn ]; then
     done
     
     echo SVN-${RESULT##-}-r${REV}
-elif [ -d ${1}/.git ]; then
-    # If the first log commit messages indicates that this is checked into
-    # subversion, we'll just use the SVN- form of the revision.
-    MODIFIED=""
-    SVN_REV=`git log --pretty=full -1 | grep -F "git-svn-id:" | sed -e "s/.*\@\([^\s]*\)\s.*/\1/g"`
-    if [ -z "$SVN_REV" ]; then
-        VERSION=`git describe --tags --dirty=M 2> /dev/null | sed -e "s/^v\([0-9]\)/\1/"`
-        if [ $? -ne 0 ]; then
-            if [ "`git ls-files -m | wc -l`" != "0" ]; then
-                MODIFIED="M"
-            fi
-            # Some older versions of git do not support all the above
-            # options.
-            VERSION=GIT-`git rev-parse --short --verify HEAD`${MODIFIED}
-        fi
-	VERSION=${VERSION##*/}    # Remove leading slashes: upsteram/2.10.2
-	VERSION=${VERSION#[1-9]%} # Remove 1% from tag (tag from Debian epoch)
-        echo ${VERSION}
-    else
-        PARTS=`LANG=C git log --pretty=full | grep -F "git-svn-id:" | head -1 | awk '{print $2;}' | sed -e s:^.*/svn/$2/:: | sed -e 's:/: :g' | sed -e 's/@.*$//g'`
-        BRANCH=0
-        TEAM=0
-
-        if [ "`git ls-files -m | wc -l`" != "0" ]; then
-            MODIFIED="M"
-        fi
-
-        if [ "${PARTS}" = "trunk" ]; then
-            echo SVN-'trunk'-r${SVN_REV}${MODIFIED}
-            exit 0
-        fi
-
-        for PART in $PARTS
-          do
-              if [ ${BRANCH} != 0 ]; then
-              RESULT="${RESULT}-${PART}"
-              break
-          fi
-
-          if [ ${TEAM} != 0 ]; then
-              RESULT="${RESULT}-${PART}"
-              continue
-          fi
-
-          if [ "${PART}" = "branches" ]; then
-              BRANCH=1
-              RESULT="branch"
-              continue
-          fi
-
-          if [ "${PART}" = "tags" ]; then
-              BRANCH=1
-              RESULT="tag"
-              continue
-          fi
-
-          if [ "${PART}" = "team" ]; then
-              TEAM=1
-              continue
-          fi
-        done
-
-        echo SVN-${RESULT##-}-r${SVN_REV}${MODIFIED}
-    fi
-else
-	# Use the directory information in the absence of any other version
-	# information
-	pwd -P
 fi

build_tools/make_version_c

@@ -0,0 +1,10 @@
+#!/bin/sh
+cat << END
+/*
+ * version.c
+ * Automatically generated
+ */
+
+const char dahdi_tools_version[] = "DAHDI Tools Version - ${TOOLSVERSION}";
+
+END

build_tools/menuselect-deps.in

@@ -0,0 +1,2 @@
+LIBNEWT=@PBX_NEWT@
+HDLC=@PBX_HDLC@

configure.ac

@@ -2,65 +2,29 @@
 
 AC_PREREQ(2.59)
  
-m4_define([short_version],
+m4_define([TOOLSVERSION],
           m4_bpatsubst(m4_esyscmd([build_tools/make_version . dahdi/tools]),
                        [\([0-9.]*\)\(\w\|\W\)*],
                        [\1]))
-AC_INIT([dahdi-tools], short_version, [www.asterisk.org])
+AC_INIT(dahdi, TOOLSVERSION, www.asterisk.org)
 
 # check existence of the package
 AC_CONFIG_SRCDIR([dahdi_cfg.c])
-AC_CONFIG_AUX_DIR([auxdir])
-AC_CONFIG_MACRO_DIR([m4])
-AM_INIT_AUTOMAKE([foreign subdir-objects])
-
-build_version=`build_tools/make_version . dahdi/tools`
-AC_SUBST([BUILD_VERSION], "$build_version")
-
-# enable nice build output on automake1.11
-m4_pattern_allow([AM_DEFAULT_VERBOSITY])
-m4_ifdef([AM_SILENT_RULES],[AM_SILENT_RULES([yes])],[AM_DEFAULT_VERBOSITY=1])
-AM_CONDITIONAL([SILENT_RULES], [test "$AM_DEFAULT_VERBOSITY" = '0'])
 
 AC_COPYRIGHT("dahdi-tools")
 AC_REVISION($Revision$)
 
-# Preserve old defaults if called without --prefix or --prefix=/usr
-#  prefix=/usr
-#  sysconfdir=/etc
-
 ac_default_prefix=/usr
-if test "$prefix" = 'NONE' -o "$prefix" = '/usr'; then
-	if test ${sysconfdir} = '${prefix}/etc'; then
-	   sysconfdir=/etc
-	fi
-	if test ${mandir} = '${prefix}/man'; then
-	   mandir=/usr/share/man
-	fi
-
-	if test ${localstatedir} = '${prefix}/var'; then
-	     localstatedir=/var
-	fi
+if test ${sysconfdir} = '${prefix}/etc'; then
+   sysconfdir=/etc
+fi
+if test ${mandir} = '${prefix}/man'; then
+   mandir=/usr/share/man
 fi
-AC_SUBST([dahditoolsdir], ['${datadir}/dahdi'])
-AC_SUBST([dahdiincludedir], ['${includedir}/dahdi'])
 
-# Where to install udev rules?
-#  * Our default is $sysconfdir/udev/rules.d:
-#    - This preserve legacy location.
-#    - It doesn't write into modern vendor supplied location (/lib/udev/rules.d)
-#    - It doesn't break "make distcheck" (where everything should be relative
-#      to prefix.
-#  * Packagers are encouraged to use --udevrules=/lib/udev/rules.d
-#
-m4_define([_UDEV_RULES_DIR_DEFAULT], [${sysconfdir}/udev/rules.d])dnl
-AC_ARG_WITH(udevrules,
-	[AS_HELP_STRING([--with-udevrules=PATH],
-		[Location of UDEV rules @<:@default=]_UDEV_RULES_DIR_DEFAULT[@:>@])],
-	[udevrulesdir=$withval],
-	[udevrulesdir=]'_UDEV_RULES_DIR_DEFAULT'
-)
-AC_SUBST([udevrulesdir], "$udevrulesdir")
+if test ${localstatedir} = '${prefix}/var'; then
+     localstatedir=/var
+fi
 
 # specify output header file
 AC_CONFIG_HEADER(autoconfig.h)
@@ -68,18 +32,15 @@ AC_CONFIG_HEADER(autoconfig.h)
 # This needs to be before any macros that use the C compiler
 AC_GNU_SOURCE
 
+AC_CHECK_HEADERS([sys/soundcard.h linux/soundcard.h])
+
 AC_CHECK_TOOL([LD], [ld])
 
 # Checks for programs.
-AC_PROG_CXX
 AC_PROG_CC
 AC_PROG_CPP
-AM_PROG_CC_C_O
 AC_PROG_INSTALL
 AC_PROG_LN_S
-AC_PROG_MAKE_SET
-AC_PROG_AWK
-AC_PROG_LIBTOOL
 AST_CHECK_GNU_MAKE
 
 test_obj=conftest.o
@@ -109,35 +70,6 @@ AC_SUBST(DOWNLOAD)
 
 AC_LANG(C)
 
-AC_PATH_PROG([PERL], [perl])
-if test "$PERL" = ''; then
-	      AC_MSG_ERROR(perl is mandatory)
-fi
-# Where to install perl modules?
-#  * Packagers are encouraged to use the result of "perl -V:vendorlib"
-#  * Our default is:
-#    - The result of "perl -V:sitelib" for our default prefix (/usr)
-#    - The "$datadir/perl5" directory otherwise (e.g: during "make distcheck")
-#
-AC_MSG_CHECKING(for perl libdir)
-m4_define([_PERL_LIBDIR_DEFAULT], [${datadir}/perl5])dnl
-AC_ARG_WITH(perllib,
-	[AS_HELP_STRING([--with-perllib=PATH],
-		[Location of perl modules @<:@default=]_PERL_LIBDIR_DEFAULT[, or perl -V:sitelib@:>@])],
-	[perllibdir=$withval],
-	[
-		if test "$prefix" = 'NONE' -o "$prefix" = '/usr'; then
-			eval `"$PERL" -V:sitelib`
-			perllibdir="$sitelib"
-		else
-			perllibdir='_PERL_LIBDIR_DEFAULT'
-		fi
-	]
-)
-AC_SUBST([perllibdir], "$perllibdir")
-AC_MSG_RESULT([$perllibdir])
-AM_CONDITIONAL([PERL], [test "$perllibdir" != ''])
-
 AC_ARG_ENABLE(dev-mode,
 	[  --enable-dev-mode    Turn on developer mode],
 	[case "${enableval}" in
@@ -146,7 +78,6 @@ AC_ARG_ENABLE(dev-mode,
 	      *) AC_MSG_ERROR(bad value ${enableval} for --enable-dev-mode)  ;;
 	esac])
 AC_SUBST(DAHDI_DEVMODE)
-AM_CONDITIONAL([DAHDI_DEVMODE], [test "$DAHDI_DEVMODE" = 'yes'])
 
 AC_MSG_CHECKING(for -Wdeclaration-after-statement support)
 if $(${CC} -Wdeclaration-after-statement -S -o /dev/null -xc /dev/null > /dev/null 2>&1); then
@@ -158,104 +89,17 @@ else
 fi
 AC_SUBST(DAHDI_DECLARATION_AFTER_STATEMENT)
 
-# Checks for header files.
-AC_CHECK_HEADERS([sys/soundcard.h linux/soundcard.h])
-AC_CHECK_HEADERS([arpa/inet.h fcntl.h limits.h netinet/in.h stdint.h stdlib.h string.h sys/ioctl.h sys/param.h sys/socket.h sys/time.h syslog.h unistd.h])
-
-# Checks for typedefs, structures, and compiler characteristics.
-AC_C_INLINE
-AC_TYPE_SIZE_T
-AC_TYPE_SSIZE_T
-AC_TYPE_UINT16_T
-AC_TYPE_UINT32_T
-AC_TYPE_UINT8_T
-
-# Checks for libraries.
-AC_CHECK_LIB([m], [cos])
-AC_CHECK_LIB([pthread], [pthread_create])
-
 AST_EXT_LIB_SETUP([DAHDI], [DAHDI], [dahdi])
 AST_EXT_LIB_SETUP([NEWT], [newt], [newt])
 AST_EXT_LIB_SETUP([USB], [usb], [usb])
-AST_EXT_LIB_SETUP([PCAP], [pcap], [pcap])
 
 AST_C_DEFINE_CHECK([DAHDI], [DAHDI_CODE], [dahdi/user.h])
 DAHDI23_DIR="${DAHDI_DIR}"
 AST_C_DEFINE_CHECK([DAHDI23], [DAHDI_CONFIG_NTTE], [dahdi/user.h])
 AST_EXT_LIB_CHECK([NEWT], [newt], [newtBell], [newt.h])
 AST_EXT_LIB_CHECK([USB], [usb], [usb_init], [usb.h])
-AST_EXT_LIB_CHECK([PCAP], [pcap], [pcap_compile], [pcap.h])
-
-saved_CPPFLAGS="$CPPFLAGS"
-CPPFLAGS="$CPPFLAGS $DAHDI_INCLUDE"
-AC_CHECK_DECL([DAHDI_TXMIRROR], [DAHDI_TXMIRROR=1], [DAHDI_TXMIRROR=0], [#include <dahdi/user.h>])
-CPPFLAGS="$saved_CPPFLAGS"
-
-AM_CONDITIONAL([PBX_NEWT], [test "$PBX_NEWT" = "1"])
-AM_CONDITIONAL([PBX_PCAP], [test "$PBX_PCAP" = "1" -a "$DAHDI_TXMIRROR" = "1"])
 
 AC_CHECK_FUNCS([semtimedop])
-AC_CHECK_FUNCS([alarm bzero gettimeofday memset pow regcomp select socket strcasecmp strchr strdup strerror strrchr strstr strtol strtoul])
-AC_FUNC_ERROR_AT_LINE
-AC_FUNC_MALLOC
-
-# What the user asked for? libusb/libusbx
-AC_ARG_WITH([libusbx],
-	[AS_HELP_STRING([--without-libusbx], [Disable libusbx @<:@default=check@:>@])],
-	[],
-	[with_libusbx=check])
-AC_ARG_WITH([libusb],
-	[AS_HELP_STRING([--without-libusb], [Disable libusb-0.1 @<:@default=check@:>@])],
-	[],
-	[with_libusb=check])
-
-# LIBUSBX tests
-have_libusbx=
-AS_IF([test "$with_libusbx" != "no"],
-	[PKG_CHECK_MODULES([LIBUSBX], [libusb-1.0],
-		[AC_CHECK_LIB([usb-1.0], [libusb_error_name],
-			[
-				have_libusbx="yes"
-				AC_DEFINE([HAVE_LIBUSBX], [1], [Define to 1 if you have <libusb.h>.])
-				AC_SUBST([PBX_USB], [1])
-			], [
-				if test "$with_libusbx" != "yes"; then
-					AC_MSG_NOTICE([Ignoring old libusb-1.0, trying fallback to old libusb])
-				fi
-			])
-		], [:])
-	], [])
-
-AS_IF([test "$with_libusbx" = "yes" -a "$have_libusbx" = ""],
-	[AC_MSG_ERROR([No libusbx found (--with-libusbx was given)])])
-
-# LIBUSB tests
-have_libusb=
-AS_IF([test "$with_libusb" != "no"],
-	[AS_IF([test "$have_libusbx" != ""],
-		[
-			AS_IF([test "$with_libusbx" = "check"], [
-				AC_MSG_NOTICE([Skipping LIBUSB tests (have good LIBUSBX)])
-				])
-		], [
-			PKG_CHECK_MODULES([LIBUSB], [libusb],
-				[
-					have_libusb="yes"
-					AC_SUBST([PBX_USB], [1])
-				]
-				[AC_DEFINE([HAVE_LIBUSB], [1], [Define to 1 if you have <usb.h>.])],
-				[:]
-				)
-		])
-	], [])
-
-AS_IF([test "$with_libusb" = "yes" -a "$have_libusb" = ""],
-	[AC_MSG_ERROR([No libusb found (--with-libusb was given)])])
-
-AM_CONDITIONAL([LIBUSBX], [test "$have_libusbx" != ""])
-AM_CONDITIONAL([LIBUSB], [test "$have_libusb" != ""])
-AM_CONDITIONAL([PBX_USB], [test "$PBX_USB" = "1"])
-
 
 PBX_HDLC=0
 AC_MSG_CHECKING([for GENERIC_HDLC_VERSION version 4 in linux/hdlc.h])
@@ -294,7 +138,6 @@ if test "x${PBX_HDLC}" != "x1"; then
 fi
 
 AC_SUBST(PBX_HDLC)
-AM_CONDITIONAL([PBX_HDLC], [test "$PBX_HDLC" = "1"])
 
 AC_ARG_WITH(selinux,
 	[AS_HELP_STRING([--with-selinux],
@@ -350,9 +193,6 @@ case "$with_ppp" in
 	;;
 esac
 
-AC_SUBST(PPPD_VERSION)
-AM_CONDITIONAL([PPPD], [test "$PPPD_VERSION" != ''])
-
 if test "x${PBX_DAHDI}" != "x1"; then
    AC_MSG_NOTICE([***])
    AC_MSG_NOTICE([*** Building this package requires DAHDI support. *** ])
@@ -371,26 +211,7 @@ fi
 
 AC_SUBST(PPPD_VERSION)
 
-# Taken from octasic-helper
-AC_SUBST([USE_OCTASIC], [yes])
-AM_CONDITIONAL([USE_OCTASIC], [test "$USE_OCTASIC" = 'yes'])
-octasic_dir='$(top_srcdir)/xpp/oct612x'
-AC_SUBST([OCTASIC_CFLAGS], ["-I$octasic_dir/include -I$octasic_dir/octdeviceapi -I$octasic_dir/octdeviceapi/oct6100api"])
-
-AC_SUBST([TOOLSVERSION], m4_esyscmd([build_tools/make_version . dahdi/tools]))
-
-AC_CONFIG_FILES([
-	makeopts
-	version.c
-	Makefile
-	doc/Makefile
-	hotplug/Makefile
-	ppp/Makefile
-	xpp/Makefile
-	xpp/xtalk/Makefile
-	xpp/oct612x/Makefile
-	xpp/perl_modules/Makefile
-	])
+AC_CONFIG_FILES([build_tools/menuselect-deps makeopts])
 AC_OUTPUT
 
 AC_MSG_NOTICE(*** dahdi-tools build successfully configured ***)

dahdi-bash-completion

@@ -1,133 +0,0 @@
-# Check for bash
-[ -z "$BASH_VERSION" ] && return
-
-__dahdi_span_assignments() {
-	local cur prev has_cmd i
-	COMPREPLY=()
-	cur=${COMP_WORDS[COMP_CWORD]}
-	prev=${COMP_WORDS[COMP_CWORD-1]}
-
-	has_cmd=0
-	for (( i=0; i < COMP_CWORD; i++)); do
-		case "${COMP_WORDS[$i]}" in
-		add | auto | dumpconfig | list | remove)
-			has_cmd=1
-			break
-			;;
-		esac
-	done
-	case "$prev" in
-	-k | --key) COMPREPLY=( $(compgen -W 'devpath hwid location' -- $cur) ) ;;
-	*)
-		case "$cur" in
-		-*) COMPREPLY=( ${COMPREPLY[@]} $(compgen -W \
-			'-h -k -n -v --help --key --dry-run --verbose' -- $cur ) )
-			;;
-		*)
-			if [ "$has_cmd" = 1 ]; then
-				COMPREPLY=( ${COMPREPLY[@]} $(shopt -s nullglob; \
-					echo /sys/bus/dahdi_devices/devices/* ) )
-			else
-				COMPREPLY=( ${COMPREPLY[@]} $(compgen -W \
-					'add auto dumpconfig list remove' -- $cur) )
-			fi
-			;;
-		esac
-		;;
-	esac
-}
-
-complete -F __dahdi_span_assignments dahdi_span_assignments
-
-__dahdi_span_types() {
-	local cur prev has_cmd i
-	COMPREPLY=()
-	cur=${COMP_WORDS[COMP_CWORD]}
-	prev=${COMP_WORDS[COMP_CWORD-1]}
-
-	has_cmd=0
-	for (( i=0; i < COMP_CWORD; i++)); do
-		case "${COMP_WORDS[$i]}" in
-		dumpconfig | list | set | compare)
-			has_cmd=1
-			break
-			;;
-		esac
-	done
-	case "$prev" in
-	-k | --key) COMPREPLY=( $(compgen -W 'devpath hwid location' -- $cur) ) ;;
-	--line-type) COMPREPLY=( $(compgen -W 'E1 J1 T1' -- $cur) ) ;;
-	*)
-		case "$cur" in
-		-*) COMPREPLY=( ${COMPREPLY[@]} $(compgen -W \
-			'-h -k -n -v --help --key --dry-run --line-type --verbose' -- $cur ) )
-			;;
-		*)
-			if [ "$has_cmd" = 1 ]; then
-				# FIXME: check if devices are settable?
-				COMPREPLY=( ${COMPREPLY[@]} $( \
-					grep -l '[EJT]1' /sys/devices/pci0000:00/0000:00:10.4/usb1/1-1/xbus-00/*/spantype 2>/dev/null | sed -e 's|/spantype||') )
-			else
-				COMPREPLY=( ${COMPREPLY[@]} $(compgen -W \
-					'dumpconfig list set compare' -- $cur) )
-			fi
-			;;
-		esac
-		;;
-	esac
-}
-
-complete -F __dahdi_span_types dahdi_span_types
-
-
-__dahdi_genconf() {
-	local cur
-	COMPREPLY=()
-	prev=${COMP_WORDS[COMP_CWORD-1]}
-	cur=${COMP_WORDS[COMP_CWORD]}
-
-	case "$prev" in
-	--line-type) COMPREPLY=( $(compgen -W 'E1 J1 T1' -- $cur) ) ;;
-	*)
-		case "$cur" in
-		-*) COMPREPLY+=( $(compgen -W '-F -v -V --freepbx --version --verbose --line-type' -- $cur ) ) ;;
-		*)
-			COMPREPLY+=( $(compgen -W "$( perl -e 'my $file = "\u$ARGV[0]";
-				# Complete module name. Translate the case of the
-				# first letter
-				my @pats = map {"$_/Dahdi/Config/Gen/$file*.pm"} @INC;
-				foreach (@pats) {
-					foreach(glob) {
-						s|.*/||;
-						s|.pm$||;
-						s|^(.)|lc($1)|e;
-						print "$_ "
-					}
-				}')" -- $cur ) )
-			;;
-		esac
-		;;
-	esac
-}
-
-complete -F __dahdi_genconf dahdi_genconf
-
-__dahdi_cfg() {
-	local cur prev
-	COMPREPLY=()
-	cur=${COMP_WORDS[COMP_CWORD]}
-	prev=${COMP_WORDS[COMP_CWORD-1]}
-
-	case "$prev" in
-	-c) COMPREPLY=( $(compgen -f -- $cur) ) ;;
-	-S) COMPREPLY=( $(ls -d /sys/bus/dahdi_spans/devices/* 2>/dev/null | sed -e 's/.*-//') ) ;;
-	# FIXME: A similar completion for -C (<chan1>-<chan2>)
-	*)
-		COMPREPLY=( ${COMPREPLY[@]} $(compgen -W \
-			'-c -C -f -h -s -S -t -v ' -- $cur ) )
-		;;
-	esac
-}
-
-# Disable until -c works properly
-#complete -F __dahdi_cfg dahdi_cfg

dahdi.init

@@ -144,18 +144,15 @@ hotplug_exit_after_load() {
 
 # Initialize the Xorcom Astribank (xpp/) using perl utiliites:
 xpp_startup() {
-	if [ "$ASTERISK_SUPPORTS_DAHDI_HOTPLUG" = yes ]; then
-		aas_param='/sys/module/dahdi/parameters/auto_assign_spans'
-		aas=`cat "$aas_param" 2>/dev/null`
-		if [ "$aas" = 0 ]; then
-			echo 1>&2 "Don't wait for Astribanks (use Asterisk hotplug-support)"
-			return 0
-		fi
-	fi
 	# do nothing if there are no astribank devices:
 	if ! /usr/share/dahdi/waitfor_xpds; then return 0; fi
 
 	hotplug_exit_after_load
+
+	# overriding locales for the above two, as perl can be noisy
+	# when locales are missing.
+	# No register all the devices if they didn't auto-register:
+	LC_ALL=C dahdi_registration on
 }
 
 
@@ -230,25 +227,21 @@ load_modules() {
 	echo ""
 }
 
-# Make sure that either dahdi is loaded or modprobe-able
-dahdi_modules_loadable() {
-	modinfo dahdi >/dev/null 2>&1 || lsmod | grep -q -w ^dahdi
-}
-
 if [ ! -x "$DAHDI_CFG" ]; then
        echo "dahdi_cfg not executable"
        exit 0
 fi
 
+if [ ! -f /etc/dahdi/system.conf ]; then
+	echo "/etc/dahdi/system.conf not found. Nothing to do."
+       exit 0
+fi
+
 RETVAL=0
 
 # See how we were called.
 case "$1" in
   start)
-	if ! dahdi_modules_loadable; then
-		echo "No DAHDI modules on the system. Not starting"
-		exit 0
-	fi
   	if hotplug_should_load_modules; then
 		load_modules
 	fi
@@ -266,9 +259,6 @@ case "$1" in
 
 	xpp_startup
 
-	# Assign all spans that weren't handled via udev + /etc/dahdi/assigned-spans.conf
-	/usr/share/dahdi/dahdi_auto_assign_compat
-
 	if [ $system = debian ]; then
 	    echo -n "Running dahdi_cfg: "
 	    $DAHDI_CFG_CMD 2> /dev/null && echo -n "done"
@@ -287,12 +277,8 @@ case "$1" in
 		$FXOTUNE -s || :
 	fi
 
-	# Do not try to call xpp_sync if there are no Astribank devices
-	# installed.
-	if test -e /sys/bus/astribanks; then 
-		# Set the right Astribanks ticker:
-		LC_ALL=C xpp_sync "$XPP_SYNC"
-	fi
+	# Set the right Astribanks ticker:
+	LC_ALL=C xpp_sync "$XPP_SYNC"
 
 	hpec_start
 	;;

dahdi.rules

@@ -1,18 +0,0 @@
-
-ACTION!="add",	GOTO="dahdi_add_end"
-
-# DAHDI devices with ownership/permissions for running as non-root
-SUBSYSTEM=="dahdi",		OWNER="asterisk", GROUP="asterisk", MODE="0660"
-
-# Backward compat names: /dev/dahdi/<channo>
-SUBSYSTEM=="dahdi_channels",	SYMLINK+="dahdi/%m"
-
-# Add persistant names as well
-SUBSYSTEM=="dahdi_channels", ATTRS{hardware_id}!="",	SYMLINK+="dahdi/devices/%s{hardware_id}/%s{local_spanno}/%n"
-SUBSYSTEM=="dahdi_channels", ATTRS{location}!="",	SYMLINK+="dahdi/devices/@%s{location}/%s{local_spanno}/%n"
-
-LABEL="dahdi_add_end"
-
-# hotplug scripts
-SUBSYSTEM=="dahdi_devices",	RUN+="%E{DAHDI_TOOLS_ROOTDIR}/usr/share/dahdi/dahdi_handle_device"
-SUBSYSTEM=="dahdi_spans",	RUN+="%E{DAHDI_TOOLS_ROOTDIR}/usr/share/dahdi/dahdi_span_config"

dahdi_cfg.c

@@ -29,18 +29,13 @@
 
 #include <stdio.h> 
 #include <getopt.h>
-#include <signal.h>
 #include <string.h>
 #include <stdarg.h>
 #include <stdlib.h>
 #include <unistd.h>
 #include <sys/ioctl.h>
 #include <fcntl.h>
-#include <sys/stat.h>
-#include <semaphore.h>
 #include <errno.h>
-#include <dirent.h>
-#include <stdbool.h>
 
 #include <dahdi/user.h>
 #include "tonezone.h"
@@ -90,9 +85,11 @@ static struct dahdi_lineconfig lc[DAHDI_MAX_SPANS];
 
 static struct dahdi_chanconfig cc[DAHDI_MAX_CHANNELS];
 
+static int current_span = 0;
 static int only_span = 0;
 static int restrict_channels = 0;
 static int selected_channels[DAHDI_MAX_CHANNELS];
+static int chan2span[DAHDI_MAX_CHANNELS];
 static int declared_spans[DAHDI_MAX_SPANS];
 
 static struct dahdi_attach_echocan ae[DAHDI_MAX_CHANNELS];
@@ -107,7 +104,7 @@ static int fiftysixkhdlc[DAHDI_MAX_CHANNELS];
 
 static int spans=0;
 
-static int dry_run = 0;
+static int fo_real = 1;
 
 static int verbose = 0;
 
@@ -140,97 +137,6 @@ static const char *laws[] = {
 	"A-law"
 };
 
-static bool _are_all_spans_assigned(const char *device_path)
-{
-	char attribute[1024];
-	int res;
-	FILE *fp;
-	int span_count;
-	DIR *dirp;
-	struct dirent *dirent;
-
-	snprintf(attribute, sizeof(attribute) - 1,
-		 "%s/span_count", device_path);
-	fp = fopen(attribute, "r");
-	if (NULL == fp) {
-		fprintf(stderr, "Failed to open '%s'.\n", attribute);
-		return false;
-	}
-	res = fscanf(fp, "%d", &span_count);
-	fclose(fp);
-
-	if (EOF == res) {
-		fprintf(stderr, "Failed to read '%s'.\n", attribute);
-		return false;
-	}
-
-	dirp = opendir(device_path);
-	while (span_count) {
-		dirent = readdir(dirp);
-		if (NULL == dirent)
-			break;
-		if (!strncmp("span-", dirent->d_name, 5)) {
-			--span_count;
-		}
-	}
-	closedir(dirp);
-	return (span_count > 0) ? false : true;
-}
-
-/**
- * are_all_spans_assigned - Look in sysfs to see if all spans for a device are assigned.
- *
- * Returns true if there are $span_count child spans of all devices, or false
- *  otherwise.
- */
-static bool are_all_spans_assigned(void)
-{
-	DIR *dirp;
-	struct dirent *dirent;
-	bool res = true;
-	char device_path[1024];
-
-	dirp = opendir("/sys/bus/dahdi_devices/devices");
-	if (!dirp) {
-		/* If we cannot open dahdi_devices, either dahdi isn't loaded,
-		 * or we're using an older version of DAHDI that doesn't use
-		 * sysfs. */
-		return true;
-	}
-
-	while (true && res) {
-
-		dirent = readdir(dirp);
-		if (NULL == dirent)
-			break;
-
-		if (!strcmp(dirent->d_name, ".") ||
-		    !strcmp(dirent->d_name, ".."))
-			continue;
-
-		snprintf(device_path, sizeof(device_path)-1,
-			 "/sys/bus/dahdi_devices/devices/%s", dirent->d_name);
-		res = _are_all_spans_assigned(device_path);
-	}
-
-	closedir(dirp);
-	errno = 0;
-	return res;
-}
-
-static bool wait_for_all_spans_assigned(unsigned long timeout_sec)
-{
-	bool all_assigned = are_all_spans_assigned();
-	unsigned int timeout = 10*timeout_sec;
-
-	while (!all_assigned && --timeout) {
-		usleep(100000);
-		all_assigned = are_all_spans_assigned();
-	}
-
-	return all_assigned;
-}
-
 static const char *sigtype_to_str(const int sig)
 {
 	switch (sig) {
@@ -331,9 +237,20 @@ static char *trim(char *buf)
 
 static int skip_channel(int x)
 {
+	int	spanno = chan2span[x];
+
 	if (restrict_channels) {
 		if (!selected_channels[x])
 			return 1;
+		/* sanity check */
+		if (only_span) {
+			if (spanno != 0 && only_span != spanno) {
+				fprintf(stderr,
+					"Only span %d. Skip selected channel %d from span %d\n",
+					only_span, x, spanno);
+				return 1;
+			}
+		}
 	} else {
 		if (only_span && !declared_spans[only_span]) {
 			fprintf(stderr,
@@ -341,6 +258,8 @@ static int skip_channel(int x)
 				only_span);
 			exit(1);
 		}
+		if (only_span && only_span != spanno)
+			return 1;
 	}
 	return 0;
 }
@@ -427,6 +346,7 @@ int spanconfig(char *keyword, char *args)
 		error("Span number should be a valid span number, not '%s'\n", realargs[0]);
 		return -1;
 	}
+	current_span = span;
 	declared_spans[span] = 1;
 	res = sscanf(realargs[1], "%d", &timing);
 	if ((res != 1) || (timing < 0) || (timing > MAX_TIMING)) {
@@ -599,6 +519,7 @@ static int chanconfig(char *keyword, char *args)
 	int master=0;
 	int dacschan = 0;
 	char *idle;
+	int is_digital;
 	bzero(chans, sizeof(chans));
 	strtok(args, ":");
 	idle = strtok(NULL, ":");
@@ -610,6 +531,7 @@ static int chanconfig(char *keyword, char *args)
 	if (res <= 0)
 		return -1;
 	for (x=1;x<DAHDI_MAX_CHANNELS;x++) {
+		is_digital = 0;
 		if (chans[x]) {
 			if (slineno[x]) {
 				error("Channel %d already configured as '%s' at line %d\n", x, sig[x], slineno[x]);
@@ -655,6 +577,7 @@ static int chanconfig(char *keyword, char *args)
 					return -1;
 				cc[x].sigtype = DAHDI_SIG_CAS;
 				sig[x] = sigtype_to_str(cc[x].sigtype);
+				is_digital = 1;
 			} else if (!strcasecmp(keyword, "dacs")) {
 				/* Setup channel for monitor */
 				cc[x].idlebits = dacschan;
@@ -665,6 +588,7 @@ static int chanconfig(char *keyword, char *args)
 				cc[dacschan].sigtype = DAHDI_SIG_DACS;
 				sig[x] = sigtype_to_str(cc[dacschan].sigtype);
 				dacschan++;
+				is_digital = 1;
 			} else if (!strcasecmp(keyword, "dacsrbs")) {
 				/* Setup channel for monitor */
 				cc[x].idlebits = dacschan;
@@ -674,6 +598,7 @@ static int chanconfig(char *keyword, char *args)
 				cc[dacschan].idlebits = x;
 				cc[dacschan].sigtype = DAHDI_SIG_DACS_RBS;
 				sig[x] = sigtype_to_str(cc[dacschan].sigtype);
+				is_digital = 1;
 				dacschan++;
 			} else if (!strcasecmp(keyword, "unused")) {
 				cc[x].sigtype = 0;
@@ -681,6 +606,7 @@ static int chanconfig(char *keyword, char *args)
 			} else if (!strcasecmp(keyword, "indclear") || !strcasecmp(keyword, "bchan")) {
 				cc[x].sigtype = DAHDI_SIG_CLEAR;
 				sig[x] = sigtype_to_str(cc[x].sigtype);
+				is_digital = 1;
 			} else if (!strcasecmp(keyword, "clear")) {
 				sig[x] = sigtype_to_str(DAHDI_SIG_CLEAR);
 				if (master) {
@@ -690,6 +616,7 @@ static int chanconfig(char *keyword, char *args)
 					cc[x].sigtype = DAHDI_SIG_CLEAR;
 					master = x;
 				}
+				is_digital = 1;
 			} else if (!strcasecmp(keyword, "rawhdlc")) {
 				sig[x] = sigtype_to_str(DAHDI_SIG_HDLCRAW);
 				if (master) {
@@ -699,6 +626,7 @@ static int chanconfig(char *keyword, char *args)
 					cc[x].sigtype = DAHDI_SIG_HDLCRAW;
 					master = x;
 				}
+				is_digital = 1;
 			} else if (!strcasecmp(keyword, "nethdlc")) {
 				sig[x] = sigtype_to_str(DAHDI_SIG_HDLCNET);
 				memset(cc[x].netdev_name, 0, sizeof(cc[x].netdev_name));
@@ -712,6 +640,7 @@ static int chanconfig(char *keyword, char *args)
 					}
 					master = x;
 				}
+				is_digital = 1;
 			} else if (!strcasecmp(keyword, "fcshdlc")) {
 				sig[x] = sigtype_to_str(DAHDI_SIG_HDLCFCS);
 				if (master) {
@@ -721,26 +650,26 @@ static int chanconfig(char *keyword, char *args)
 					cc[x].sigtype = DAHDI_SIG_HDLCFCS;
 					master = x;
 				}
+				is_digital = 1;
 			} else if (!strcasecmp(keyword, "dchan")) {
 				sig[x] = "D-channel";
 				cc[x].sigtype = DAHDI_SIG_HDLCFCS;
+				is_digital = 1;
 			} else if (!strcasecmp(keyword, "hardhdlc")) {
 				sig[x] = "Hardware assisted D-channel";
 				cc[x].sigtype = DAHDI_SIG_HARDHDLC;
+				is_digital = 1;
 			} else if (!strcasecmp(keyword, "mtp2")) {
 				sig[x] = "MTP2";
 				cc[x].sigtype = DAHDI_SIG_MTP2;
+				is_digital = 1;
 			} else {
 				fprintf(stderr, "Huh? (%s)\n", keyword);
 			}
-
-			if (cc[x].sigtype != DAHDI_SIG_CAS &&
-			    cc[x].sigtype != DAHDI_SIG_DACS &&
-			    cc[x].sigtype != DAHDI_SIG_DACS_RBS) {
-				if (NULL != idle) {
-					fprintf(stderr, "WARNING: idlebits are not valid on %s channels.\n", sig[x]);
-				}
-			}
+			if (is_digital)
+				chan2span[x] = current_span;
+			else
+				current_span = 0;
 		}
 	}
 	return 0;
@@ -785,22 +714,21 @@ static int setfiftysixkhdlc(char *keyword, char *args)
 	return 0;
 }
 
-static int apply_fiftysix(void)
+static void apply_fiftysix(void)
 {
 	int x;
 	int rate;
 	int chanfd;
 
 	for (x = 1; x < DAHDI_MAX_CHANNELS; x++) {
-		if (skip_channel(x) || !cc[x].sigtype)
+		if (skip_channel(x))
 			continue;
-
 		chanfd = open("/dev/dahdi/channel", O_RDWR);
 		if (chanfd == -1) {
 			fprintf(stderr, 
 			    "Couldn't open /dev/dahdi/channel: %s\n", 
 			    strerror(errno));
-			return -1;	
+			exit(-1);
 		}
 
 		if (ioctl(chanfd, DAHDI_SPECIFY, &x)) {
@@ -821,7 +749,6 @@ static int apply_fiftysix(void)
 		}
 		close(chanfd);
 	}
-	return 0;
 }
 
 static int setechocan(char *keyword, char *args)
@@ -1344,7 +1271,7 @@ static void printconfig(int fd)
 	       "Configuration\n"
 	       "======================\n\n", vi.version, vi.echo_canceller);
 	for (x = 0; x < spans; x++) {
-		if (only_span && only_span != lc[x].span)
+		if (only_span && only_span != x)
 			continue;
 		printf("SPAN %d: %3s/%4s Build-out: %s\n",
 		       lc[x].span,
@@ -1517,27 +1444,12 @@ static int span_restrict(char *str)
 	return 1;
 }
 
-static const char *SEM_NAME = "dahdi_cfg";
-static sem_t *lock = SEM_FAILED;
-
-static void signal_handler(int signal)
-{
-	if (SEM_FAILED != lock) {
-		sem_unlink(SEM_NAME);
-	}
-	/* The default handler should have been restored before this handler was
-	 * called, so we can let the "normal" processing finish the cleanup. */
-	raise(signal);
-}
-
 int main(int argc, char *argv[])
 {
 	int c;
 	char *buf;
 	char *key, *value;
 	int x,found;
-	int exit_code = 0;
-	struct sigaction act;
 
 	while((c = getopt(argc, argv, "fthc:vsd::C:S:")) != -1) {
 		switch(c) {
@@ -1557,7 +1469,7 @@ int main(int argc, char *argv[])
 			force++;
 			break;
 		case 't':
-			dry_run = 1;
+			fo_real = 0;
 			break;
 		case 's':
 			stopmode = 1;
@@ -1583,28 +1495,12 @@ int main(int argc, char *argv[])
 		fprintf(stderr, "%s\n", dahdi_tools_version);
 	}
 
-	if (!restrict_channels && only_span) {
-		error("-S requires -C\n");
-		goto finish;
-	}
-	if (!restrict_channels && !only_span) {
-		bool all_assigned = wait_for_all_spans_assigned(5);
-
-		if (!all_assigned) {
-			fprintf(stderr,
-				"Timeout waiting for all spans to be assigned.\n");
-		}
-	}
-
 	if (fd == -1) fd = open(MASTER_DEVICE, O_RDWR);
 	if (fd < 0) {
 		error("Unable to open master device '%s'\n", MASTER_DEVICE);
 		goto finish;
 	}
-	if (strcmp(filename, "-") == 0)
-		cf = fdopen(STDIN_FILENO, "r");
-	else
-		cf = fopen(filename, "r");
+	cf = fopen(filename, "r");
 	if (cf) {
 		while((buf = readline())) {
 			if (*buf == 10) /* skip new line */
@@ -1654,94 +1550,46 @@ finish:
 	if (verbose) {
 		printconfig(fd);
 	}
-
-	if (dry_run)
+	if (!fo_real) 
 		exit(0);
+
 	
 	if (debug & DEBUG_APPLY) {
 		printf("About to open Master device\n");
 		fflush(stdout);
 	}
-
-	sigemptyset(&act.sa_mask);
-	act.sa_handler = signal_handler;
-	act.sa_flags = SA_RESETHAND;
-
-	if (sigaction(SIGTERM, &act, NULL) == -1) {
-		perror("Failed to install SIGTERM handler.");
-		exit(1);
+	for (x=0;x<numdynamic;x++) {
+		/* destroy them all */
+		ioctl(fd, DAHDI_DYNAMIC_DESTROY, &zds[x]);
 	}
-	if (sigaction(SIGINT, &act, NULL) == -1) {
-		perror("Failed to install SIGINT handler.");
-		exit(1);
-	}
-
-	lock = sem_open(SEM_NAME, O_CREAT, O_RDWR, 1);
-	if (SEM_FAILED == lock) {
-		perror("Unable to create 'dahdi_cfg' mutex");
-		exit_code = 1;
-		goto release_sem;
-	}
-
-	if (-1 == sem_wait(lock)) {
-		perror("Failed to wait for 'dahdi_cfg' mutex");
-		exit_code = 1;
-		goto unlink_sem;
-	}
-
-	if (!restrict_channels && !only_span) {
-		for (x=0;x<numdynamic;x++) {
-			/* destroy them all */
-			ioctl(fd, DAHDI_DYNAMIC_DESTROY, &zds[x]);
-		}
-	}
-
 	if (stopmode) {
 		for (x=0;x<spans;x++) {
-			if (only_span && lc[x].span != only_span)
+			if (only_span && x != only_span)
 				continue;
 			if (ioctl(fd, DAHDI_SHUTDOWN, &lc[x].span)) {
 				fprintf(stderr, "DAHDI shutdown failed: %s\n", strerror(errno));
 				close(fd);
-				exit_code = 1;
-				goto release_sem;
+				exit(1);
 			}
 		}
-		exit_code = 1;
-		goto release_sem;
+		exit(1);
 	}
 	for (x=0;x<spans;x++) {
-		if (only_span && lc[x].span != only_span)
+		if (only_span && x != only_span)
 			continue;
 		if (ioctl(fd, DAHDI_SPANCONFIG, lc + x)) {
 			fprintf(stderr, "DAHDI_SPANCONFIG failed on span %d: %s (%d)\n", lc[x].span, strerror(errno), errno);
 			close(fd);
-			exit_code = 1;
-			goto release_sem;
+			exit(1);
 		}
 	}
-
-	if (!restrict_channels && !only_span) {
-
-		sem_post(lock);
-
-		for (x=0;x<numdynamic;x++) {
-			if (ioctl(fd, DAHDI_DYNAMIC_CREATE, &zds[x])) {
-				fprintf(stderr, "DAHDI dynamic span creation failed: %s\n", strerror(errno));
-				close(fd);
-				exit_code = 1;
-				goto release_sem;
-			}
-			wait_for_all_spans_assigned(1);
-		}
-
-		if (-1 == sem_wait(lock)) {
-			perror("Failed to wait for 'dahdi_cfg' mutex after creating dynamic spans");
-			exit_code = 1;
-			goto unlink_sem;
+	for (x=0;x<numdynamic;x++) {
+		if (ioctl(fd, DAHDI_DYNAMIC_CREATE, &zds[x])) {
+			fprintf(stderr, "DAHDI dynamic span creation failed: %s\n", strerror(errno));
+			close(fd);
+			exit(1);
 		}
 	}
-
 	for (x=1;x<DAHDI_MAX_CHANNELS;x++) {
 		struct dahdi_params current_state;
 		int master;
@@ -1864,8 +1712,7 @@ finish:
 					" to channel 16 of an E1 CAS span\n");
 			}
 			close(fd);
-			exit_code = 1;
-			goto release_sem;
+			exit(1);
 		}
 
 		ae[x].chan = x;
@@ -1876,8 +1723,7 @@ finish:
 		if (ioctl(fd, DAHDI_ATTACH_ECHOCAN, &ae[x])) {
 			fprintf(stderr, "DAHDI_ATTACH_ECHOCAN failed on channel %d: %s (%d)\n", x, strerror(errno), errno);
 			close(fd);
-			exit_code = 1;
-			goto release_sem;
+			exit(1);
 		}
 	}
 	if (0 == numzones) {
@@ -1904,28 +1750,18 @@ finish:
 		if (ioctl(fd, DAHDI_DEFAULTZONE, &deftonezone)) {
 			fprintf(stderr, "DAHDI_DEFAULTZONE failed: %s (%d)\n", strerror(errno), errno);
 			close(fd);
-			exit_code = 1;
-			goto release_sem;
+			exit(1);
 		}
 	}
 	for (x=0;x<spans;x++) {
-		if (only_span && lc[x].span != only_span)
+		if (only_span && x != only_span)
 			continue;
 		if (ioctl(fd, DAHDI_STARTUP, &lc[x].span)) {
 			fprintf(stderr, "DAHDI startup failed: %s\n", strerror(errno));
 			close(fd);
-			exit_code = 1;
-			goto release_sem;
+			exit(1);
 		}
 	}
-	exit_code = apply_fiftysix();
-
-release_sem:
-	if (SEM_FAILED != lock)
-		sem_post(lock);
-
-unlink_sem:
-	if (SEM_FAILED != lock)
-		sem_unlink(SEM_NAME);
-	exit(exit_code);
+	apply_fiftysix();
+	exit(0);
 }

dahdi_monitor.c

@@ -427,14 +427,6 @@ int main(int argc, char *argv[])
 				exit(EXIT_FAILURE);
 			}
 			fprintf(stderr, "Writing pre-echo combined stream to %s\n", optarg);
-			file_is_wav[MON_PRE_BRX] = filename_is_wav(optarg);
-			if (file_is_wav[MON_PRE_BRX]) {
-				wavheader_init(&wavheaders[MON_PRE_BRX], 1);
-				if (fwrite(&wavheaders[MON_PRE_BRX], 1, sizeof(struct wavheader), ofh[MON_PRE_BRX]) != sizeof(struct wavheader)) {
-					fprintf(stderr, "Could not write wav header to %s: %s\n", optarg, strerror(errno));
-					exit(EXIT_FAILURE);
-				}
-			}
 			preecho = 1;
 			savefile = 1;
 			break;
@@ -771,6 +763,12 @@ int main(int argc, char *argv[])
 		if (!(file_is_wav[i]))
 			continue;
 
+		rewind(ofh[i]);
+
+		if (fread(&wavheaders[i], 1, sizeof(struct wavheader), ofh[i]) != sizeof(struct wavheader)) {
+			fprintf(stderr, "Failed to read in a full wav header.  Expect bad things.\n");
+		}
+
 		wavheaders[i].riff_chunk_size = (bytes_written[i]) + sizeof(struct wavheader) - 8; /* filesize - 8 */
 		wavheaders[i].data_data_size = bytes_written[i];
 

dahdi_scan.c

@@ -42,35 +42,12 @@ static inline int is_digital_span(struct dahdi_spaninfo *s)
 	return (s->linecompat > 0);
 }
 
-static int get_basechan(unsigned int spanno)
-{
-	int res;
-	int basechan;
-	char filename[256];
-	FILE *fp;
-
-	snprintf(filename, sizeof(filename),
-		 "/sys/bus/dahdi_spans/devices/span-%u/basechan", spanno);
-	fp = fopen(filename, "r");
-	if (NULL == fp) {
-		return -1;
-	}
-	res = fscanf(fp, "%d", &basechan);
-	fclose(fp);
-	if (EOF == res) {
-		return -1;
-	}
-	return basechan;
-}
-
-
 int main(int argc, char *argv[])
 {
 	int ctl;
 	int x, y, z;
 	struct dahdi_params params;
 	unsigned int basechan = 1;
-	int direct_basechan;
 	struct dahdi_spaninfo s;
 	char buf[100];
 	char alarms[50];
@@ -110,14 +87,6 @@ int main(int argc, char *argv[])
 			}
 		}
 
-		/* DAHDI-Linux 2.5.x exposes the base channel in sysfs. Let's
-		 * try to look for it there in case there are holes in the span
-		 * numbering. */
-		direct_basechan = get_basechan(x);
-		if (-1 != direct_basechan) {
-			basechan = direct_basechan;
-		}
-
 		alarms[0] = '\0';
 		if (s.alarms) {
 			if (s.alarms & DAHDI_ALARM_BLUE)

dahdi_span_assignments

@@ -1,399 +0,0 @@
-#! /bin/sh
-#
-# /usr/sbin/dahdi_span_assignments:
-#
-# this script can be used both from udev and
-# from the command line to assign/unassign and list
-# current span assignments.
-#
-# It uses a configuration file: $DAHDICONFDIR/assigned-spans.conf
-# (default DAHDICONFDIR=/etc/dahdi)
-#
-# The first argument is an action:
-#   "auto"       - trigger driver auto_assign attribute for given devices
-#		   (no configuration file is used)
-#   "add"        - assign (spans which are not already assigned), according
-#                  to /etc/dahdi/assigned-spans.conf configuration file
-#   "remove"     - unassign spans which are not already unassigned
-#   "list"       - human-readable list of all spans (with/without assignments)
-#   "dumpconfig" - dump current assignments in a /etc/dahdi/assigned-spans.conf
-#                  compatible format
-#
-# Without further arguments, it operates on all existing spans
-# With one or more sysfs dahdi_devices it is limited to those.
-#
-# We may use alternative "keys" for device matching:
-# * Available keys:
-#   - "hwid"       - Hardware id attribute from sysfs
-#   - "@location"  - Location attribute from sysfs (embeded inside '<>')
-#   - "/devpath"   - The sysfs absolute devpath
-#
-# * During "dumpconfig", for each device we take the first available key:
-#   - The preference is: "hwid" or else "@location" or else "/devpath"
-#   - This can be overriden via the SPAN_ASSIGNMENTS_KEY environment variable
-#     or the '{-k|--key} key' command line option.
-#
-# * During "add":
-#   - Any key match is valid (hwid/location/devpath)
-#   - Shell globs (wildcards: '*', '?', '[...]') may be optionally used.
-#
-# Command line options:
-#  - The '-h|--help' show a usage message.
-#  - The '-n|--dry-run' affects the "add" and "remove" operations.
-#  - The '-v|--verbose' currently shows device matches during "add" operation.
-#  - The '-k <key>|--key <key>' overrides the SPAN_ASSIGNMENTS_KEY environment
-#    variable.
-#
-# Examples:
-#    dahdi_span_assignments list
-#    dahdi_span_assignments add	# all unassigned devices
-#    dahdi_span_assignments add       /sys/bus/dahdi_devices/devices/astribanks:xbus-00
-#    dahdi_span_assignments remove	# all assigned devices
-#    dahdi_span_assignments -k location dumpconfig
-#
-
-devbase='/sys/bus/dahdi_devices/devices'
-DAHDICONFDIR="${DAHDICONFDIR:-/etc/dahdi}"
-DAHDISASSIGNEDSPANSCONF="${DAHDIASSIGNEDSPANSCONF:-"${DAHDICONFDIR}/assigned-spans.conf"}"
-SPAN_ASSIGNMENTS_KEY=${SPAN_ASSIGNMENTS_KEY:-hwid}
-dry_run=
-verbose=
-
-usage() {
-	echo >&2 "Usage: $0 [options] action [devpath ...]"
-	echo >&2 "       action:"
-	echo >&2 "         auto       - trigger driver auto_assign attribute for given devices"
-	echo >&2 "         add        - assign spans, according to /etc/dahdi/assigned-spans.conf"
-	echo >&2 "         remove     - unassign spans"
-	echo >&2 "         list       - human-readable list of all spans"
-	echo >&2 "         matched    - found spans matched in configuration"
-	echo >&2 "         unmatched  - found spans not matched in configuration"
-	echo >&2 "         dumpconfig - dump current state as new configuration"
-	echo >&2 ""
-	echo >&2 "       options:"
-	echo >&2 "         -h|--help      - Show this help"
-	echo >&2 "         -n|--dry-run   - For 'add/remove' actions"
-	echo >&2 "         -v|--versbose  - Show matches during 'add' action"
-	echo >&2 "         -k|--key <k>   - Override prefered key during dumpconfig action"
-	exit 1
-}
-
-# Parse command line options
-TEMP=`getopt -o hnvk: --long help,dry-run,verbose,key: -n "$0" -- "$@"`
-if [ $? != 0 ]; then
-	echo >&2 "Bad options"
-	usage
-fi
-
-# Note the quotes around `$TEMP': they are essential!
-eval set -- "$TEMP"
-
-while true ; do
-	case "$1" in
-	-h|--help)
-		usage
-		;;
-	-n|--dry-run)
-		dry_run='true'
-		shift
-		;;
-	-v|--verbose)
-		verbose='true'
-		shift
-		;;
-	-k|--key)
-		SPAN_ASSIGNMENTS_KEY="$2"
-		shift
-		shift
-		;;
-	--)
-		shift
-		break
-		;;
-	*)
-		echo >&2 "Internal error!"
-		exit 1
-		;;
-	esac
-done
-
-if [ "$#" -eq 0 ]; then
-	echo >&2 "Missing action argument"
-	usage
-fi
-action="$1"
-shift
-
-# Validate SPAN_ASSIGNMENTS_KEY
-case "$SPAN_ASSIGNMENTS_KEY" in
-hwid|location|devpath)
-	;;
-*)
-	echo >&2 "Bad SPAN_ASSIGNMENTS_KEY='$SPAN_ASSIGNMENTS_KEY' (should be: hwid|location|devpath)"
-	usage
-	;;
-esac
-
-if [ ! -d "$devbase" ]; then
-	echo >&2 "$0: Missing '$devbase' (DAHDI driver unloaded?)"
-	exit 1
-fi
-
-# Use given devices or otherwise, all existing devices
-if [ "$#" -gt 0 ]; then
-	DEVICES="$@"
-else
-	DEVICES=`ls -d $devbase/* 2>/dev/null`
-fi
-
-# Beware of special characters in attributes
-attr_clean() {
-	cat "$1" 2>/dev/null | tr -d '\n' | tr '!' '/' | tr -c 'a-zA-Z0-9/:.-' '_'
-}
-
-show_devices() {
-
-	for device in $DEVICES
-	do
-		devpath=`cd "$device" && pwd -P`
-		location='@'`attr_clean "$device/location"`
-		hardware_id=`attr_clean "$device/hardware_id"`
-		for local_spanno in `cut -d: -f1 "$device/spantype"`
-		do
-			span=`grep 2>/dev/null -Hw "$local_spanno" "$device/span-"*"/local_spanno" | \
-				sed -e 's,/local_spanno:.*,,' -e 's,.*/,,'`
-			if [ "$span" != '' ]; then
-				spanno=`echo $span | sed 's/^.*-//'`
-				name=`cat 2>/dev/null "$device/$span/name"`
-				basechan=`cat 2>/dev/null "$device/$span/basechan"`
-			else
-				spanno='-'
-				basechan='-'
-			fi
-			printf "%-8s %-14s %s %s\n" "$local_spanno:$spanno:$basechan" "[$hardware_id]" "$location" "$devpath"
-		done | sort -n
-	done
-}
-
-dump_config() {
-	echo '#'
-	echo "# Autogenerated by $0 on `date`"
-	echo "# Map devices + local spans to span + base channel number"
-	echo ''
-	for device in $DEVICES
-	do
-		devpath=`cd "$device" && pwd -P`
-		location=`attr_clean "$device/location"`
-		hardware_id=`attr_clean "$device/hardware_id"`
-		if [ "$SPAN_ASSIGNMENTS_KEY" = 'hwid' -a "$hardware_id" != '' ]; then
-			id="$hardware_id"
-		elif [ "$SPAN_ASSIGNMENTS_KEY" = 'location' -a "$location" != '' ]; then
-			id="@$location"
-		else
-			id="$devpath"
-		fi
-		echo "# Device: [$hardware_id] @$location $devpath"
-		for local_spanno in `cut -d: -f1 "$device/spantype"`
-		do
-			span=`grep 2>/dev/null -Hw "$local_spanno" "$device/span-"*"/local_spanno" | \
-				sed -e 's,/local_spanno:.*,,' -e 's,.*/,,'`
-			if [ "$span" != '' ]; then
-				spanno=`echo $span | sed 's/^.*-//'`
-				name=`cat 2>/dev/null "$device/$span/name"`
-				basechan=`cat 2>/dev/null "$device/$span/basechan"`
-				printf "%-30s %s\n" "$id" "$local_spanno:$spanno:$basechan"
-			else
-				echo "#   Skipped unassigned local span $local_spanno"
-			fi
-		done | sort
-		echo ''
-	done
-}
-
-unassign_all_spans() {
-	for device in $DEVICES
-	do
-		find "$device" -follow -maxdepth 1 -name 'span-*' -type d | \
-			sort | while read spandir; do
-			local_spanno=`cat "$spandir/local_spanno"`
-			if [ "$dry_run" = true ]; then
-				echo >&2 "(dry-run) unassign $device $local_spanno"
-				continue
-			fi
-			echo >&2 "unassign $device $local_spanno"
-			if ! echo "$local_spanno" > "$device/unassign_span"; then
-				echo >&2 "$0: failed unassigning '$local_spanno' in '$device'"
-			fi
-		done
-	done
-}
-
-# Allow comments and empty lines in config file
-filter_conf() {
-	sed -e 's/#.*//' -e '/^[ \t]*$/d' "$DAHDISASSIGNEDSPANSCONF"
-}
-
-assign_device_spans() {
-	device="$1"
-	for s in $spanspecs
-	do
-		local_spanno=`echo "$s" | cut -d: -f1`
-		spanno=`echo "$s" | cut -d: -f2`
-		span="$device/span-$spanno"
-		if [ "$dry_run" = true ]; then
-			echo "(dry-run) assign $device: $s"
-			continue
-		fi
-		if [ -d "$span" ]; then
-			span_local_spanno=`cat "$span/local_spanno"`
-			if [ "$span_local_spanno" != "$local_spanno" ]; then
-				echo >&2 "WARNING: $span_local_spanno != $local_spanno"
-			fi
-			echo >&2 "$device [$local_spanno] already assigned to span $spanno. Skipping..."
-			continue
-		fi
-		echo >&2 "assign $device: $s"
-		if ! echo "$s" > "$device/assign_span"; then
-			echo >&2 "$0: failed assigning '$s' to '$device'"
-		fi
-	done
-}
-
-match_device() {
-	device="$1"
-	devpath=`cd "$device" && pwd -P`
-	location='@'`attr_clean "$device/location"`
-	hardware_id=`attr_clean "$device/hardware_id"`
-	filter_conf | while read id spanspecs
-	do
-		# We use case to enable shell-style globbing in configuration
-		case "$hardware_id" in
-		$id)
-			[ "$verbose" = true ] && echo >&2 "match by hwid ($id ~ $hardware_id): $spanspecs"
-			assign_device_spans "$device"
-			;;
-		esac
-		# We use case to enable shell-style globbing in configuration
-		case "$location" in
-		$id)
-			[ "$verbose" = true ] && echo >&2 "match by location ($id ~ $location): $spanspecs"
-			assign_device_spans "$device"
-			;;
-		esac
-		# We use case to enable shell-style globbing in configuration
-		case "$devpath" in
-		$id)
-			[ "$verbose" = true ] && echo >&2 "match by devpath ($id ~ $devpath): $spanspecs"
-			assign_device_spans "$device"
-			;;
-		esac
-	done
-}
-
-assign_devices() {
-	if [ ! -f "$DAHDISASSIGNEDSPANSCONF" ]; then
-		echo >&2 "$0: Missing '$DAHDISASSIGNEDSPANSCONF'"
-		exit 1
-	fi
-	echo >&2 "using '$DAHDISASSIGNEDSPANSCONF'"
-	for device in $DEVICES
-	do
-		match_device "$device"
-	done
-}
-
-auto_assign_devices() {
-	for device in $DEVICES
-	do
-		echo >&2 "auto-assign $device"
-		if [ "$dry_run" != true ]; then
-			echo 1 > "$device/auto_assign"
-		fi
-	done
-}
-
-dev_match_conf() {
-	local devpath="$1"
-	local location="$2"
-	local hardware_id="$3"
-	local local_spanno="$4"
-	filter_conf | while read id spanspecs
-	do
-		spanno=`echo "$spanspecs" | cut -d: -f1`
-		match_dev=no
-		# We use case to enable shell-style globbing in configuration
-		case "$hardware_id" in
-		$id)
-			match_dev=yes
-			;;
-		esac
-		# We use case to enable shell-style globbing in configuration
-		case "$location" in
-		$id)
-			match_dev=yes
-			;;
-		esac
-		# We use case to enable shell-style globbing in configuration
-		case "$devpath" in
-		$id)
-			match_dev=yes
-			;;
-		esac
-		if [ "$match_dev" = 'yes' -a "$local_spanno" = "$spanno" ]; then
-			#printf "%-8s (%s) %-14s %s %s\n" "$local_spanno" "$spanno" "[$hardware_id]" "$location" "$devpath"
-			echo "[$hardware_id]:$local_spanno"
-		fi
-	done
-}
-
-list_devices() {
-	wanted="$1"
-	if [ ! -f "$DAHDISASSIGNEDSPANSCONF" ]; then
-		echo >&2 "$0: Missing '$DAHDISASSIGNEDSPANSCONF'"
-		exit 1
-	fi
-	echo >&2 "using '$DAHDISASSIGNEDSPANSCONF'"
-	for device in $DEVICES
-	do
-		devpath=`cd "$device" && pwd -P`
-		location='@'`attr_clean "$device/location"`
-		hardware_id=`attr_clean "$device/hardware_id"`
-		for local_spanno in `cut -d: -f1 "$device/spantype"`
-		do
-			found=`dev_match_conf "$devpath" "$location" "$hardware_id" "$local_spanno"`
-			if [ "$wanted" = "unmatched" ]; then
-				[ -z "$found" ] && echo "[$hardware_id]:$local_spanno"
-			else
-				[ -z "$found" ] || echo "[$hardware_id]:$local_spanno"
-			fi
-		done
-	done
-}
-
-case "$action" in
-auto)
-	auto_assign_devices
-	;;
-add)
-	assign_devices
-	;;
-remove)
-	unassign_all_spans
-	;;
-list)
-	show_devices
-	;;
-dumpconfig)
-	dump_config
-	;;
-matched)
-	list_devices "matched"
-	;;
-unmatched)
-	list_devices "unmatched"
-	;;
-*)
-	echo >&2 "Bad action='$action'"
-	usage
-	;;
-esac

dahdi_span_types

@@ -1,397 +0,0 @@
-#! /bin/sh
-#
-# /usr/sbin/dahdi_span_types
-#
-# This script can be used both from udev and
-# from the command line to manage PRI spans
-# type (E1/T1/J1).
-#
-# Span types can be set only *BEFORE* span are assigned.
-#
-# It uses a configuration file: $DAHDICONFDIR/span-types.conf
-# (default DAHDICONFDIR=/etc/dahdi)
-# (the format is documented inside that file)
-#
-# The first argument is an action:
-#   "set"        - actually write the setting to the driver
-#   "list"       - human-readable list of E1/T1/J1 types
-#   "dumpconfig" - dump current assignments in a /etc/dahdi/span-types.conf
-#                  compatible format
-#
-# Without further arguments, it operates on all existing spans
-# With one or more sysfs dahdi_devices it is limited to those.
-#
-# We may use alternative "keys" for device matching:
-# * Available keys:
-#   - "hwid"       - Hardware id attribute from sysfs
-#   - "@location"  - Location attribute from sysfs (embeded inside '<>')
-#   - "/devpath"   - The sysfs absolute devpath
-#
-# * Wildcard are allowed in the configuration file:
-#   - In the device specifiers (keys)
-#   - In the span numbers
-#   - Example for "match-all":    *   *:T1
-#
-# * During "set":
-#   - If there are multiple matches, for a span, all are applied
-#   - They are always applied in their order in the configuration file
-#   - This means the last match wins
-#   - Example:
-#         *                   *:T1        # All span on all devices are T1
-#         usb:X1234567        [34]:E1	   # Except spans 3,4 on specific device
-#
-# * During "dumpconfig", for each device we take the first available key:
-#   - The preference is: "hwid" or else "@location" or else "/devpath"
-#   - This can be overriden via the SPAN_ASSIGNMENTS_KEY environment variable
-#     or the '{-k|--key} key' command line option.
-#
-# Command line options:
-#  - The '-h|--help' show a usage message.
-#  - The '-v|--verbose' show debugging messages (on stderr)
-#  - The '-n|--dry-run' During "set", only show what would be done
-#  - The '-k <key>|--key <key>' overrides the SPAN_ASSIGNMENTS_KEY environment
-#    variable.
-#
-# Examples:
-#    dahdi_span_types list
-#    dahdi_span_types set	     # all devices
-#    dahdi_span_types set /sys/bus/dahdi_devices/devices/astribanks:xbus-00
-#    dahdi_span_types -k location dumpconfig
-#
-
-
-devbase='/sys/bus/dahdi_devices/devices'
-DAHDICONFDIR="${DAHDICONFDIR:-/etc/dahdi}"
-DAHDISPANTYPESCONF="${DAHDISPANTYPESCONF:-"${DAHDICONFDIR}/span-types.conf"}"
-SPAN_ASSIGNMENTS_KEY=${SPAN_ASSIGNMENTS_KEY:-hwid}
-
-usage() {
-	echo >&2 "Usage: $0 [options] action [devpath ...]"
-	echo >&2 "       action:"
-	echo >&2 "         set        - set spans to E1/T1 according to /etc/dahdi/span-types.conf"
-	echo >&2 "         compare    - show config values that differ from system"
-	echo >&2 "         list       - human-readable list of all spans"
-	echo >&2 "         dumpconfig - dump current state in /etc/dahdi/span-types.conf format"
-	echo >&2 ""
-	echo >&2 "       options:"
-	echo >&2 "         -h|--help      - Show this help"
-	echo >&2 "         -v|--verbose'  - Show debugging messages (on stderr)"
-	echo >&2 "         -n|--dry-run'  - During 'set', only show what would be done"
-	echo >&2 "         -k|--key <k>   - Override prefered key during dumpconfig action"
-	echo >&2 "         --line-mode <m> - Set default line mode to <m> (E1/T1/J1)"
-	exit 1
-}
-
-# Parse command line options
-TEMP=`getopt -o hnvk: --long help,dry-run,verbose,key:,line-mode: -n "$0" -- "$@"`
-if [ $? != 0 ]; then
-	echo >&2 "Bad options"
-	usage
-fi
-
-compare=false
-
-# Note the quotes around `$TEMP': they are essential!
-eval set -- "$TEMP"
-
-while true ; do
-	case "$1" in
-	-h|--help)
-		usage
-		;;
-	-n|--dry-run)
-		shift
-		dry_run=true
-		;;
-	-v|--verbose)
-		shift
-		verbose=true
-		;;
-	-k|--key)
-		SPAN_ASSIGNMENTS_KEY="$2"
-		shift
-		shift
-		;;
-	--line-mode)
-		DEFAULT_LINE_MODE="$2"
-		shift
-		shift
-		;;
-	--)
-		shift
-		break
-		;;
-	*)
-		echo "Internal error!"
-		exit 1
-		;;
-	esac
-done
-
-if [ "$#" -eq 0 ]; then
-	echo >&2 "Missing action argument"
-	usage
-fi
-action="$1"
-shift
-
-# Validate SPAN_ASSIGNMENTS_KEY
-case "$SPAN_ASSIGNMENTS_KEY" in
-hwid|location|devpath)
-	;;
-*)
-	echo >&2 "Bad --key='$SPAN_ASSIGNMENTS_KEY' (should be: hwid|location|devpath)"
-	usage
-	;;
-esac
-
-# Validate DEFAULT_LINE_MODE
-case "$DEFAULT_LINE_MODE" in
-E1|T1|J1|'')
-	;;
-*)
-	echo >&2 "Bad --line-mode='$DEFAULT_LINE_MODE' (should be: E1|T1|J1)"
-	usage
-	;;
-esac
-
-if [ ! -d "$devbase" ]; then
-	echo >&2 "$0: Missing '$devbase' (DAHDI driver unloaded?)"
-	exit 1
-fi
-
-# Use given devices or otherwise, all existing devices
-if [ "$#" -gt 0 ]; then
-	DEVICES="$@"
-else
-	DEVICES=`ls -d $devbase/* 2>/dev/null`
-fi
-
-# Beware of special characters in attributes
-attr_clean() {
-	cat "$1" 2>/dev/null | tr -d '\n' | tr '!' '/' | tr -c 'a-zA-Z0-9/:.-' '_'
-}
-
-show_spantypes() {
-	echo "# PRI span types (E1/T1/J1)"
-	for device in $DEVICES
-	do
-		devpath=`cd "$device" && pwd -P`
-		location='@'`attr_clean "$device/location"`
-		hardware_id=`attr_clean "$device/hardware_id"`
-		cat "$device/spantype" | while read st; do
-			case "$st" in
-			*:[ETJ]1)
-				printf "%-10s %-20s %-30s %s\n" \
-					"$st" "[$hardware_id]" "$location" \
-					"$devpath"
-				;;
-			esac
-		done
-	done
-}
-
-list_pri_spantypes() {
-	find $DEVICES -follow -maxdepth 1 -name spantype | \
-		xargs cat | \
-		sed -n '/:[ETJ]1$/s/^.*://p' | \
-		sort -u | \
-		tr '\n' ' ' | \
-		sed -e 's/^ *//' -e 's/ *$//'
-}
-
-dump_config() {
-	pri_spantypes=`list_pri_spantypes`
-	num_spantypes=`echo "$pri_spantypes" | wc -w`
-	gen_default=''
-	echo '#'
-	echo "# Autogenerated by $0 on `date`"
-	echo "# Map PRI DAHDI devices to span types for E1/T1/J1"
-	echo "#"
-
-	echo "# Summary:"
-	if [ "$DEFAULT_LINE_MODE" != '' ]; then
-		gen_default="$DEFAULT_LINE_MODE"
-		echo "#  * Generating wildcard match of $gen_default."
-		echo "#    - Was run with '--line-mode=$DEFAULT_LINE_MODE'"
-	elif [ "$num_spantypes" -eq 1 ]; then
-		gen_default="$pri_spantypes"
-		echo "#  * Generating wildcard match of $gen_default."
-		echo "#    - Spans were $pri_spantypes"
-	else
-		echo "#  * Not generating wildcard match."
-		echo "#    - Was run without '--line-mode' option and span were of mixed types [$pri_spantypes]"
-	fi
-	echo "#"
-	if [ "$num_spantypes" -eq 1 ]; then
-		echo "#  * Generating a list of commented out configurations for spans."
-		echo "#    - Spans were $pri_spantypes"
-		echo "#    - Uncomment for specific overrides"
-	else
-		echo "#  * Generating a list of specific span configurations."
-		echo "#    - Spans were of mixed types: $pri_spantypes"
-	fi
-	echo "#"
-	echo ''
-
-	fmt="%-65s %s"
-	printf "$fmt\n" '# @location/hardware_id' 'span_type'
-
-	if [ "$gen_default" != '' ]; then
-		printf "$fmt\t\t# Wildcard line-mode" "*" "*:$gen_default"
-		echo ""
-	fi
-	echo ""
-	for device in $DEVICES
-	do
-		devpath=`cd "$device" && pwd -P`
-		location=`attr_clean "$device/location"`
-		hardware_id=`attr_clean "$device/hardware_id"`
-		if [ "$SPAN_ASSIGNMENTS_KEY" = 'hwid' -a "$hardware_id" != '' ]; then
-			id="$hardware_id"
-		elif [ "$SPAN_ASSIGNMENTS_KEY" = 'location' -a "$location" != '' ]; then
-			id="@$location"
-		else
-			id="$devpath"
-		fi
-		echo "# Device: [$hardware_id] @$location $devpath"
-		cat "$device/spantype" | while read st; do
-			case "$st" in
-			*:[ETJ]1)
-				if [ "$num_spantypes" -eq 1 ]; then
-					printf "#$fmt\n" "$id" "$st"
-				else
-					printf "$fmt\n" "$id" "$st"
-				fi
-				;;
-			*)
-				#echo "#    Skipped local span `echo $st | sed 's/:/ -- /'`"
-				;;
-			esac
-		done | sort -n
-		echo ''
-	done
-}
-
-# Allow comments and empty lines in config file
-filter_conf() {
-	sed -e 's/#.*//' -e '/^[ \t]*$/d' "$DAHDISPANTYPESCONF"
-}
-
-handle_span() {
-	device="$1"
-	spantype="$2"
-	attr_file="$device/spantype"
-	devpath=`cd "$device" && pwd -P`
-	devname=`echo "$device" | sed "s,$devbase/,,"`
-	location='@'`attr_clean "$device/location"`
-	hardware_id=`attr_clean "$device/hardware_id"`
-	spanno=`echo "$spantype" | cut -d: -f1`
-	#echo >&2 "DEBUG: $device $spanno ($spantype)"
-	filter_conf | while read id span_spec; do
-			sn=`echo "$span_spec" | cut -d: -f1`
-			val=`echo "$span_spec" | cut -d: -f2`
-			case "$spanno" in
-			$sn)
-				;;
-			*)
-				#echo >&2 "no-match($device $spanno): $sn"
-				continue
-				;;
-			esac
-			found=no
-			# GLOBBING
-			case "$location" in
-			$id)
-				#echo >&2 "match($id): $span_spec"
-				found=yes
-				;;
-			esac
-			case "$hardware_id" in
-			$id)
-				#echo >&2 "match([$id]): $span_spec"
-				found=yes
-				;;
-			esac
-			case "$devpath" in
-			$id)
-				#echo >&2 "match([$id]): $span_spec"
-				found=yes
-				;;
-			esac
-			if [ "$found" = 'yes' ]; then
-				if [ "$dry_run" = 'true' -o "$verbose" = 'true' ]; then
-					echo >&2 "Set $devname span $spanno = $val"
-				fi
-				if [ "$dry_run" != 'true' ]; then
-					if [ "$compare" = 'true' ]; then
-						config="$spanno:$val"
-						system=`grep "$spanno:" "$attr_file"`
-						if [ "$config" != "$system" ]; then
-
-							active_val=`echo $system | cut -d: -f2`
-							echo "$devname $spanno     $val     $active_val" >>"$compare_results_file"
-						fi
-					else
-						echo "$spanno:$val" > "$attr_file"
-					fi
-				fi
-			fi
-		done
-}
-
-set_all_devices() {
-	span_differs='false'
-	SPANS_DIFFER='false'
-
-	if [ ! -f "$DAHDISPANTYPESCONF" ]; then
-		echo >&2 "$0: Missing configuration '$DAHDISPANTYPESCONF'"
-		exit 1
-	fi
-	for device in $DEVICES
-	do
-		devname=`echo "$device" | sed "s,$devbase/,,"`
-		cat "$device/spantype" | while read spantype; do
-			case "$spantype" in
-			*:[ETJ]1)
-				handle_span "$device" "$spantype"
-				;;
-			*)
-				if [ "$dry_run" = 'true' -o "$verbose" = 'true' ]; then
-					echo >&2 "Skipping non-E1/T1/J1 span ($devname -- $spantype)"
-				fi
-				;;
-			esac
-		done
-	done
-	if [ "$compare" = 'true' ]; then
-		if [ -s "$compare_results_file" ]; then
-			echo "# Device           Unit  Config Active"
-			cat "$compare_results_file"
-			rm -f "$compare_results_file"
-			exit 5
-		fi
-		rm -f "$compare_results_file"
-		exit 0
-	fi
-}
-
-case "$action" in
-list)
-	show_spantypes
-	;;
-dumpconfig)
-	dump_config
-	;;
-set)
-	set_all_devices
-	;;
-compare)
-	compare=true
-	compare_results_file=`mktemp`
-	set_all_devices
-	;;
-*)
-	usage
-	;;
-esac

dahdi_test.c

@@ -64,7 +64,7 @@ void hup_handler(int sig)
 	printf("\n--- Results after %d passes ---\n", pass);
 	printf("Best: %.3f%% -- Worst: %.3f%% -- Average: %f%%\n",
 			best, worst, pass ? total/pass : 100.00);
-	printf("Cumulative Accuracy (not per pass): %0.3f\n",
+	printf("Cummulative Accuracy (not per pass): %0.3f\n",
 	       pass ? accuracy : 0.0);
 	exit(0);
 }

dahdi_waitfor_span_assignments

@@ -1,73 +0,0 @@
-#! /bin/sh
-
-usage() {
-	echo >&2 "Usage: $0 {assigned|unassigned}"
-	echo >&2 "# wait until all spans known are assigned/unassigned"
-	exit 1
-}
-
-TIMEOUT=5	# How much time to wait for spans
-
-if [ "$#" -lt 1 ]; then
-	usage
-fi
-wanted_event="$1"
-shift
-
-case "$wanted_event" in
-assigned)
-	;;
-unassigned)
-	;;
-*)
-	usage
-	;;
-esac
-
-devbase='/sys/bus/dahdi_devices/devices'
-
-spans_of() {
-	dev="$1"
-	wc -l < "$dev/spantype"
-}
-
-assigned_spans_of() {
-	dev="$1"
-	ls -d "$dev/span-"* 2>/dev/null | wc -l
-}
-
-
-waitfor_span_assignments() {
-	wanted_state="$1"
-	device_list=`ls -d "$devbase/"* 2> /dev/null`
-	finished=''
-	count="$TIMEOUT"
-	echo -n "Waiting for spans to become $wanted_state: "
-	while [ "$count" -gt 0 ]; do
-		finished='yes'
-		for dev in $device_list
-		do
-			spans=`spans_of "$dev"`
-			assigned_spans=`assigned_spans_of "$dev"`
-			if [ "$wanted_state" = 'assigned' -a "$assigned_spans" -ne "$spans" ]; then
-				finished='no'
-			elif [ "$wanted_state" = 'unassigned' -a "$assigned_spans" -ne 0 ]; then
-				finished='no'
-			fi
-		done
-		if [ "$finished" = 'yes' ]; then
-			break
-		else
-			sleep 1
-			echo -n "."
-		fi
-		count=`expr "$count" - 1`
-	done
-	if [ "$finished" = 'yes' ]; then
-		echo "done"
-	else
-		echo "timeout"
-	fi
-}
-
-waitfor_span_assignments "$wanted_event"

doc/Makefile.am

@@ -1,19 +0,0 @@
-man_MANS	= \
-	dahdi_cfg.8 \
-	dahdi_maint.8 \
-	dahdi_monitor.8 \
-	dahdi_scan.8 \
-	dahdi_span_assignments.8 \
-	dahdi_span_types.8 \
-	dahdi_test.8 \
-	dahdi_tool.8 \
-	dahdi_waitfor_span_assignments.8 \
-	fxotune.8
-
-noinst_MANS	= \
-	dahdi_diag.8 \
-	fxstest.8 \
-	patgen.8 \
-	pattest.8
-
-EXTRA_DIST	= $(man_MANS) $(noinst_MANS)

doc/dahdi_cfg.8

@@ -4,7 +4,7 @@
 dahdi_cfg \- configures DAHDI kernel modules from /etc/dahdi/system.conf
 .SH SYNOPSIS
 
-.B dahdi_cfg [\-c \fICFG_FILE\fB] [\-S\fINUM\fB [\-S\fICHANS\fB]] [\-s] [\-f] [\-t] [\-v [\-v ... ] ]
+.B dahdi_cfg [\-c \fICFG_FILE\fB] [\-S\fINUM\fB [-S\fICHANS\fB]] [\-s] [\-f] [\-t] [\-v [\-v ... ] ]
 
 .B dahdi_cfg \-h
 
@@ -24,8 +24,6 @@ the DAHDI init script.
 .RS
 Use an alternative configuration file instead of
 .I /etc/dahdi/system.conf
-
-If \fICFG_FILE\fR is '\fB\-\fR', it is read from stdin.
 .RE
 
 .B \-C \fICHANNELS
@@ -41,8 +39,10 @@ Only shutdown spans.
 
 .B \-S \fISPAN
 .RS
-Only apply changes to span no. \fISPAN\fR. You also need to specify the
-range of channels in the span explicitly with \-C.
+Only apply changes to span no. \fISPAN\fR. For a digital span (with
+a 'span=' line in the configuration file) this will do. For an analog
+span you'll have to explicitly tell dahdi_cfg the range of channels,
+using \-C .
 .RE
 
 .B \-f

doc/dahdi_maint.8

@@ -43,11 +43,11 @@ Insert an error of a specific type
 .SH EXAMPLES
 Enable network line loopback on span 1:
 
-  dahdi_maint \-s 1 \-\-loopback networkline
+  dahdi_maint -s 1 --loopback networkline
 
 Disable network line loopback on span 1:
 
-  dahdi_maint \-s 1 \-\-loopback off
+  dahdi_maint -s 1 --loopback off
 
 
 .SH SEE ALSO

doc/dahdi_monitor.8

@@ -35,7 +35,7 @@ Normally there's a different option that you need that implies it.
 
 .B \-o
 .RS
-Plays the output to OSS (/dev/dsp). Requires \-m not to be used.
+Plays the output to OSS (/dev/dsp). Requires -m not to be used.
 .RE
 
 .B \-v
@@ -44,7 +44,7 @@ Display Visual audio levels. With two v-s, Verbose mode is enabled, that
 shows the actual levels as numbers. Note that this requires a terminal
 wider than 80 columns to be properly displayed.
 
-Implies \-m.
+Implies -m.
 .RE
 
 .B \-f \fIFILE
@@ -62,14 +62,14 @@ to a file.
 .RS
 Record the content of the Rx channel to a file.
 
-Implies \-m.
+Implies -m.
 .RE
 
 .B \-R \fIFILE
 .RS
 Record the content of the R channel before the echo canceler to a file.
 
-Implies \-m.
+Implies -m.
 .RE
 
 .B \-s \fIFILE
@@ -87,47 +87,47 @@ canceler to a file.
 .RS
 Record the content of the Tx channel to a file.
 
-Implies \-m.
+Implies -m.
 .RE
 
 .B \-T \fIFILE
 .RS
 Record the content of the Tx channel before the echo canceler to a file.
 
-Implies \-m.
+Implies -m.
 .RE
 
 .SH EXAMPLES
 
 Visualize audio levels on DAHDI channel 2:
 
-  dahdi_monitor 2 \-v
+  dahdi_monitor 2 -v
 
 
 Record channel 3 to a file:
 
-  dahdi_monitor 3 \-f output.raw
+  dahdi_monitor 3 -f output.raw
 
 This will create a raw PCM file (signed-linear, 8kHz, mono, 16 bits per
 sample). Both the Tx and Rx will be multiplexed in a single channel.
 It can be converted to a WAV file using e.g.:
 
-  sox \-s \-c1 \-2 \-r8000 output.raw output.wav
+  sox -s -c1 -2 -r8000 output.raw output.wav
 
 
 Record Tx and Rx of channel 5 to separate files. This time directly to
 WAV files:
 
-  dahdi_monitor 5 \-r output_rx.wav \-t output_tx.wav
+  dahdi_monitor 5 -r output_rx.wav -t output_tx.wav
 
 
 Record channel 8 to a stereo file (Tx and Rx on its two channels):
 
-  dahdi_monitor 8 \-s output.raw
+  dahdi_monitor 8 -s output.raw
 
 Converting it to a WAV file:
 
-  sox \-s \-c2 \-2 \-r8000 output.raw output.wav
+  sox -s -c2 -2 -r8000 output.raw output.wav
 
 
 

doc/dahdi_span_assignments.8

@@ -1,251 +0,0 @@
-.TH "DAHDI_SPAN_ASSIGNMENTS" "8" "23 Jan 2014" "" ""
-
-.SH NAME
-dahdi_span_assignments \- handle DAHDI spans assignments
-.SH SYNOPSIS
-
-.B dahdi_span_assignments [\-v|\-\-verbose] [\-n|\-\-dry\-run] <add|remove|auto> \fB[\fIdevpath\fB...]
-
-.B dahdi_span_assignments [\-v|\-\-verbose] list \fB[\fIdevpath\fB...]
-
-.B dahdi_span_assignments [\-v|\-\-verbose] [\-k|\-\-key \fIkey\fB] dumpconfig
-
-.B dahdi_span_assignments \-h|\-\-help
-
-.SH DESCRIPTION
-Channels in DAHDI devices (such as DAHDI PCI cards) are groups to logical
-units called "spans" (for example: a port in a digital card is a span).
-When the kernel module parameter \fBdahdi.auto_assign_span\fR is unset,
-DAHDI devices that register with DAHDI don't cause their spans to be
-automatically assigned.
-
-This allows user-space to order DAHDI to assign them to specific span
-and channel numbers. That way, specific spans on specific DAHDI devices
-may be assigned with specific span and channel numbers \fBregardless\fR
-of the registration order of the hardware (or if all hardware is present
-at all).
-
-.B dahdi_span_assignments
-is used to assign those spans or to help creating the configuration
-file used in their assignment:
-.B /etc/dahdi/assigned\-spans.conf .
-
-.SH SUB-COMMANDS
-
-There are several sub-commands.
-
-All sub-commands take an optional list of paths to SysFS nodes of
-devices. If given, the command will only operate on those DAHDI
-devices. The default is to operate on all devices (which would normally
-be the sane case when running from the command-line).
-
-.B add \fB[\fIdevpath \fB...]
-.RS
-Applies to all devices or to those listed on the command line.
-Parameters are paths (in SysFS) to DAHDI devices with unassigned
-spans.
-
-The command will assign spans with DAHDI according to
-configuration in \fBassigned\-spans.conf\fR.
-
-If no line matches the span, or if the assignment for it fails (it is
-not available) it will remain unassigned.
-
-If any of the span settings fails (the span number or range of channels
-is already in use), the program will print a message, but continue
-applying the others. In such a case you should fix assigned\-spans.conf
-and re-run \fBadd\fR (or run \fBauto\fR to give those channels the
-first available range and regenerate the file with 'dahdi_genconf
-assignedspans').
-.RE
-
-.B remove \fB[\fIdevpath \fB...]
-.RS
-Applies to all devices or to those listed on the command line.
-Parameters are paths (in SysFS) to DAHDI devices with assigned
-spans.
-
-The command will un-assign them.
-.RE
-
-.B auto \fB[\fIdevpath \fB...]
-.RS
-Applies to all devices or to those listed on the command line.
-Parameters are paths (in SysFS) to DAHDI devices with unassigned
-spans.
-
-Each span is assigned to first available span number and channel
-numbers, as if \fBdahdi.auto_assign_span\fR was set. The configuration
-file doesn't affect these assignments.
-.RE
-
-.B list
-.RS
-List all spans in the system.
-.RE
-
-.B dumpconfig
-.RS
-List all assigned spans in the system in a format fit to be used in
-\fBassigned\-spans.conf\fR. Use this to generate a configuration file after
-you have (automatically or manually) assigned all existing spans.
-
-.B dahdi_genconf assignedspans
-uses this command internally.
-.RE
-
-.SH OPTIONS
-
-.B \-v \-\-verbose
-.RS
-Verbose output.
-.RE
-
-.B \-n \-\-dry\-run
-.RS
-Don't assign / un-assign spans. Only print commands used to do so.
-.RE
-
-.B \-k \fIkey
-.RS
-For \fBdumpconfig\fR \- The key by which to identify the hardware in the
-generated configuration. Legal values:
-
-.B hwid
-.RS
-Hardware identifier (e.g.: software-readable serial number). This is the
-default. If the device has no hwid, devpath is used.
-.RE
-
-.B location
-.RS
-The location field (file) in the SysFS device node (directory) for the
-DAHDI device. If not available (typically: DAHDI version <= 2.7.x),
-devpath is used.
-.RE
-
-.B devpath
-.RS
-Path in SysFS to the device node.
-.RE
-.RE
-
-.SH CONFIGURATION
-.B /etc/dahdi/assigned\-spans.conf
-is a file with lines specifying assignment of spans.
-
-Empty lines or lines beginning with '#' are ignored.
-
-Each line is in the format of:
-
-.I ID		spanspec ...
-
-The \fIID\fR field specifies the DAHDI device and the \fIspanspecs\fR
-define how to assign its spans. A line may have multiple
-\fIspanspecs\fR in a single line (though dumpconfig generates a
-configuration with one per line).
-
-.SS Span Identifier
-A DAHDI device may be specified either by a hardware identifier (a
-software readable serial number or whatever) or the location in which
-it is installed on the system. The former makes it simpler to change
-connector / slot whereas the latter makes it simpler to replace a unit.
-
-The value in this field is matched (when the commands \fBadd\fR and
-\fBremove\fR) are used) to the following values:
-
- \fIhwid\fR
- \fB@\fIlocation\fR
- \fIdevpath\fR
-
-See above for their descriptions. The value may include shell wildcards:
-*, ? and [], which are used in the match. The values to be matched are
-first cleaned up: '!' is replaced with '/' and any character beyond
-"a\-zA\-Z0\-9/:.\-" is removed.
-
-.SS Span Specification
-
-Each line should have one or more span specifications: this is the value
-used to assign a span with DAHDI in the SysFS interface. A
-specification has three colon-separated numbers:
-
-.I rel_span_no:span_no:first_chan
-
-for instance, the following are four span specifications for a quad-E1
-device: 1:6:53 2:7:84 3:8:115 4:9:146 occupying spans 6-9 and channels
-53-176.
-
-.B rel_span_no
-.RS
-The relative number of the span in the device. E.g.: port number.
-.RE
-
-.B span_no
-.RS
-The desired DAHDI span number. Must be available.
-.RE
-
-.B first_chan
-.RS
-The desired DAHDI channel number for the first DAHDI channel in the span.
-All channels of the span will be assigned following it and hence that
-space must be available.
-.RE
-
-
-.SH ENVIRONMENT
-
-.B DAHDICONFDIR
-.RS
-The directory in which assigned\-spans.conf resides. /etc/dahdi if not
-overridden from the environment.
-.RE
-
-.B DAHDISASSIGNEDSPANSCONF
-.RS
-The path to assigned-spans.conf resides. /etc/dahdi/assigned\-spans.conf if
-not overridden from the environment.
-.RE
-
-.B SPAN_ASSIGNMENTS_KEY
-.RS
-The default value for \-k . Defaults to "hwid" if not overridden from the
-environment.
-.RE
-
-
-.SH FILES
-
-.B /etc/dahdi/assigned\-spans.conf
-.RS
-The default location for the configuration file.
-.RE
-
-.B /sys/bus/dahdi_devices/devices/\fIdevice\fR
-.RS
-SysFS node for the device. In this directory reside the following
-files, among others:
-
-.B location
-.RS
-The value of the device's location field.
-.RE
-
-.B assign_span, unassign_span, auto_assign
-.RS
-Write only files for the operations. Used by \fBadd\fR, \fBremove\fR and
-\fBauto\fR, respectively.
-.RE
-
-.RE
-
-.SH SEE ALSO
-dahdi_span_types(8), dahdi_genconf(8), dahdi_cfg(8)
-
-.SH AUTHOR
-dahdi_span_assignments was written by Oron Peled.  This manual page was
-written by Tzafrir Cohen. Permission is granted to copy, distribute
-and/or modify this document under the terms of the GNU General Public
-License, Version 2 any  later version published by the Free Software
-Foundation.
-

doc/dahdi_span_types.8

@@ -1,207 +0,0 @@
-.TH "DAHDI_SPAN_TYPES" "8" "23 Jan 2014" "" ""
-
-.SH NAME
-dahdi_span_types \- set line modes of DAHDI spans before assignment
-.SH SYNOPSIS
-
-.B dahdi_span_types [\fIoptions\fB] <list|dumpconfig|compare|set> \fB[\fIdevpath \fB...]
-
-.SH DESCRIPTION
-The span type (the line mode: E1/T1/J1) must be set to a span before
-DAHDI assigns it a span number, as E1 spans use more channels.
-\fBdahdi_span_types\fR applies the span type configuration to an
-un-assigned span.
-
-Using it only makes sense when the kernel module parameter
-\fBdahdi.auto_assign_span\fR is unset, otherwise DAHDI automatically
-assign span numbers during device registration.
-
-.B dahdi_span_types
-takes a command and an optional list of devices. If no device is given,
-the command is applied to all devices.
-
-The device is marked as a path in the SysFS tree.
-
-.SH OPTIONS
-
-.B \-h|\-\-help
-.RS
-Output usage message and exit
-.RE
-
-.B \-n|\-\-dry\-run
-.RS
-During \fB"set"\fR operation, only show what would be done, without actually
-changing anything.
-.RE
-
-.B \-v|\-\-verbose
-.RS
-During \fB"set"\fR operation, show the actions that are being performed.
-.RE
-
-.BI \-\-line\-mode= <E1|T1|J1>
-.RS
-During \fB"dumpconfig"\fR operation, force special generation mode:
-.IP \(bu 3
-First, generates a "wildcard" entry with the fiven \fBline\-mode\fR.
-.IP \(bu 3
-Comment out all span entries. Each of them may be manually un-commented
-to override the "wildcard".
-.RE
-
-.SH SUB-COMMANDS
-.B set
-.RS
-Reads settings from \fBspan\-types.conf\fR and applies them to the
-device(s) specified in the command line (or all devices, if none
-specified).
-.RE
-
-.B compare
-.RS
-Compare the settings on the system to those in the configuration file.
-For each line that applies to a device on the system, print it if the
-value to be set and the active value on the system differ.
-
-The exit status is 0 if there is no difference and non-zero if a
-difference was detected.
-.RE
-
-.B list
-.RS
-List line modes for all spans in the system which may be set with
-dahdi_span_types (E1/T1/J1 spans).
-.RE
-
-.B dumpconfig
-.RS
-List types for the spans in a format fit to be used in
-\fBspan\-types.conf\fR. Use this to generate a configuration file after
-you have (perhaps manually) set all existing spans.
-
-.B dahdi_genconf spantypes
-uses this command internally.
-.RE
-
-.SH CONFIGURATION
-.SS General structure
-.B span\-types.conf
-is a file with lines specifying line modes of spans.
-
-Empty lines or lines beginning with '#' are ignored.
-
-Each line is in the format of:
-
-.I ID		spanspec ...
-
-The \fIID\fR field specifies the DAHDI device and the \fIspanspecs\fR
-define the line modes of its spans. A line may have multiple
-\fIspanspecs\fR in a single line (though dumpconfig generates a
-configuration with one per line).
-
-.SS Span Identifier
-A DAHDI device may be specified either by a hardware identifier (a
-software readable serial number or whatever) or the location in which
-it is installed on the system. The former makes it simpler to change
-connector / slot whereas the latter makes it simpler to replace a unit.
-
-The value in this field is matched (when the command \fBset\fR is
-used) to the following values:
-
- \fIhwid\fR
- \fB@\fIlocation\fR
- \fIdevpath\fR
-
-See above for their descriptions. The value may include shell wildcards:
-*, ? and [], which are used in the match. The values to be matched are
-first cleaned up: '!' is replaced with '/' and any character not in
-"a\-zA\-Z0\-9/:.\-" is replaced by "_".
-
-Note that while span\-types.conf allows an arbitrarily-complex
-combination of E1, J1 and T1 ports, it would normally have just a single
-wildcard line setting the line mode (the first line in the example below).
-
-.SS Span Specification
-
-Each line should have one or more span specifications: this is the value
-used to set span type with DAHDI in the SysFS interface. A
-specification has two colon-separated fields:
-
-.I rel_span_no:span_type
-
-for instance, the following are four span specifications specify ports 1
-and 2 as E1 and ports 3 and 4 as T1: [12]:E1 [34]:T1 .
-
-.B rel_span_no
-.RS
-The relative number of the span in the device. E.g.: port number.
-This field may contain shell wildcards (*, ? and [])
-.RE
-
-.B span_type
-.RS
-E1/T1/J1
-.RE
-
-.SS Multiple matches
-During \fBset\fR operation, the \fBdahdi_span_types\fR applies all
-matching settings to a span. This is done in the order of lines in the
-configuration files.
-
-Thus, if there are multiple matches to a span -- the last match
-will \fIwin\fR (all will be applied to the kernel in order. The last
-one in the file will be applied last).
-
-Example:
-.EX
-*             *:T1      # All spans on all devices will be T1
-usb:X1234567  [34]:E1   # Except spans 3,4 on the device which will be E1
-.EE
-
-
-.SH ENVIRONMENT
-
-.B DAHDICONFDIR
-.RS
-The directory in which span\-types.conf resides. /etc/dahdi if not
-overridden from the environment.
-.RE
-
-.B DAHDISPANTYPESCONF
-.RS
-The path to span\-types.conf resides. /etc/dahdi/span\-types.conf if
-not overridden from the environment.
-.RE
-
-
-.SH FILES
-
-.B /etc/dahdi/span\-types.conf
-.RS
-The default location for the configuration file.
-.RE
-
-.B /sys/bus/dahdi_devices/devices/\fIdevice\fR
-.RS
-SysFS node for the device. In this directory reside the following
-files, among others:
-
-.B spantype
-.RS
-read/write file. Reading from it returns current configuration for spans
-of the device. Span-specifications can be written to it to change line
-modes (but only for a span that is not assigned yet).
-.RE
-
-
-.SH SEE ALSO
-dahdi_span_assignments(8), dahdi_genconf(8), dahdi_cfg(8)
-
-.SH AUTHOR
-dahdi_span_types was written by Oron Peled.  This manual page was
-written by Tzafrir Cohen. Permission is granted to copy, distribute
-and/or modify this document under the terms of the GNU General Public
-License, Version 2 any  later version published by the Free Software
-Foundation.
-

doc/dahdi_tool.8

@@ -7,7 +7,7 @@ dahdi_tool \- Shows status of DAHDI interfaces
 .B dahdi_tool
 
 .SH DESCRIPTION
-dahdi_tool shows the current status the DAHDI interface cards plugged 
+dahdi_tool shows the current status the DAHDI inteface cards plugged 
 to the computer.
 
 It displays values like Current Alarms, SyncSource, Tx/Rx

doc/dahdi_waitfor_span_assignments.8

@@ -1,49 +0,0 @@
-.TH "DAHDI_WAITFOR_SPAN_ASSIGNMENTS" "8" "22 Jan 2014" "" ""
-
-.SH NAME
-dahdi_waitfor_span_assignments \- wait for DAHDI spans to get (un)assigned
-.SH SYNOPSIS
-
-.B dahdi_span_assignments assigned
-
-.B dahdi_span_assignments unassigned
-
-.SH DESCRIPTION
-DAHDI spans get assigned / unassigned asynchronously.
-
-.B dahdi_span_assignments
-is a helper script that allows running commands after all the spans have
-been assigned or unassigned.
-
-It takes a single command: \fBassigned\fR or \fBunassigned\fR and waits
-(up until a timeout of 5 seconds) for all the DAHDI spans in the system
-to do so.
-
-Note that if the system has a span that will not get assigned
-automatically (e.g.: it's not in assigned\-spans.conf), this program
-does not know and will wait until a timeout.
-
-.SH EXAMPLES
-
- modprobe wctdm24xxp
- dahdi_waitfor_span_assignments assigned
- do_something
-
- dahdi_span_assignments add
- dahdi_waitfor_span_assignments assigned
- do_something_else
-
- dahdi_span_assignments remove
- dahdi_span_assignments unassigned
- do_something_completely_different
-
-.SH SEE ALSO
-dahdi_span_assignments(8)
-
-.SH AUTHOR
-dahdi_waitfor_span_assignments was written by Oron Peled.  This manual
-page was written by Tzafrir Cohen. Permission is granted to copy,
-distribute and/or modify this document under the terms of the GNU
-General Public License, Version 2 any  later version published by the
-Free Software Foundation.
-

doc/fxotune.8

@@ -11,7 +11,6 @@ fxotune \- automatically tune DAHDI FXO channels
 \- dump mode
 
 .B fxotune \-s
-.I [ options ]
 \- Startup mode
 .SH
 .SH DESCRIPTION
@@ -33,7 +32,7 @@ is generated in the current directory.
 fxotune just reads the settings from fxotune.conf into the FXO modules.
 
 You are advised to run fxotune on all FXO ports you have that support 
-it and that are connected. Note that the tuning is affected by e.g.
+it and that are connected. Note that the tunning is affected by e.g.
 the physical parameters of the connection, and thus if it has been 
 radically changed, you may need to re-run fxotune.
 
@@ -44,7 +43,7 @@ cards and clones) do not have the hardware to support such tuning.
 The tuning process needs a clear line to do the tuning.  In order to do
 that, it runs in cycles of the following: sets the line off-hook, dials
 a dial string (which should set the PSTN provider waiting for the next
-digit), and then starts tuning. It has a limited amount of time for
+digit), and then starts tuning. It has a limited ammount of time for
 tuning before the PSTN gives up and gives a busy tone. So after a while
 it hangs up and starts a new cycle.
 
@@ -180,7 +179,7 @@ so if you stop it half-way, you may get a half-configured system. If you
 have already tuned your FXO channels and wish to test-run fxotune again, 
 you are advised to backup /etc/fxotune.conf .
 
-The default for \-m is 18 seconds. This assumes that you get a clear line 
+The default for \-m is 18 seconds. This asusmes that you get a clear line 
 for at least 18 seconds. It is advised that you test that timeout earlier
 by connecting a phone to the FXO line, dialing 4 (or whatever dial string 
 you put with \-n) and see how much time of silence you have.

fxotune.c

@@ -47,6 +47,7 @@ static float sintable[SINE_SAMPLES];
 
 static const float amplitude = 16384.0;
 
+static char *dahdipath = "/dev/dahdi";
 static char *configfile = "/etc/fxotune.conf";
 
 static int audio_dump_fd = -1;
@@ -912,66 +913,6 @@ retry:
 	return 0;
 }
 
-static int channel_is_fxo(int channo)
-{
-	int res = 0;
-	int fd;
-	const char *CTL_DEV = "/dev/dahdi/ctl";
-	struct dahdi_params params;
-
-	fd = open(CTL_DEV, O_RDWR, 0600);
-	if (-1 == fd) {
-		fprintf(stderr, "Failed to open %s: %s\n",
-			CTL_DEV, strerror(errno));
-		return -1;
-	}
-	params.channo = channo;
-	if (ioctl(fd, DAHDI_GET_PARAMS, &params)) {
-		fprintf(stderr,
-			"%d is not a valid channel number.\n", channo);
-		res = -1;
-	} else if (0 == (__DAHDI_SIG_FXS & params.sigcap)) {
-		fprintf(stderr,
-			"Channel %d is not an FXO port.\n", channo);
-		res = -1;
-	} else if (0 == params.sigtype) {
-		fprintf(stderr,
-			"Cannot run on unconfigured channel %d. Please run dahdi_cfg to configure channels before running fxotune.\n",
-			channo);
-		res = -1;
-	}
-	close(fd);
-	return res;
-}
-
-static int channel_open(int channo)
-{
-	int	fd;
-	const char *DEVICE = "/dev/dahdi/channel";
-
-	if (channo > 0) {
-		if (channel_is_fxo(channo))
-			return -1;
-
-		fd = open(DEVICE, O_RDWR, 0600);
-		if (fd < 0) {
-			perror(DEVICE);
-			return -1;
-		}
-
-		if (ioctl(fd, DAHDI_SPECIFY, &channo) < 0) {
-			perror("DADHI_SPECIFY ioctl failed");
-			close(fd);
-			fd = -1;
-		}
-	} else {
-		fprintf(stderr,
-			"Specified channel is not a valid channel number");
-		fd = -1;
-	}
-	return fd;
-}
-
 /**
  * Reads echo register settings from the configuration file and pushes them into
  * the appropriate devices
@@ -980,7 +921,7 @@ static int channel_open(int channo)
  * 
  * @return 0 if successful, !0 otherwise
  */	
-static int do_set(char *configfilename, int dev_range, int startdev, int stopdev)
+static int do_set(char *configfilename)
 {
 	FILE *fp = NULL;
 	int res = 0;
@@ -1007,8 +948,6 @@ static int do_set(char *configfilename, int dev_range, int startdev, int stopdev
 		if (res == EOF) {
 			break;
 		}
-		if (dev_range && (mydahdi < startdev || mydahdi > stopdev))
-			continue;
 
 		/* Check to be sure conversion is done correctly */
 		if (OUT_OF_BOUNDS(myacim) || OUT_OF_BOUNDS(mycoef1)||
@@ -1030,10 +969,11 @@ static int do_set(char *configfilename, int dev_range, int startdev, int stopdev
 		mycoefs.coef7 = mycoef7;
 		mycoefs.coef8 = mycoef8;
 	
-		if (debug >= 2)
-			printf("fxotune: set channel %d\n", mydahdi);
-		fd = channel_open(mydahdi);
+		snprintf(completedahdipath, sizeof(completedahdipath), "%s/%d", dahdipath, mydahdi);
+		fd = open(completedahdipath, O_RDWR);
+
 		if (fd < 0) {
+			fprintf(stdout, "open error on %s: %s\n", completedahdipath, strerror(errno));
 			return -1;
 		}
 
@@ -1074,8 +1014,11 @@ static int do_dump(int startdev, char* dialstr, int delayuntilsilence, int silen
 	char dahdidev[80] = "";
 	
 	int dahdimodule = startdev;
-	fd = channel_open(dahdimodule);
+	snprintf(dahdidev, sizeof(dahdidev), "%s/%d", dahdipath, dahdimodule);
+
+	fd = open(dahdidev, O_RDWR);
 	if (fd < 0) {
+		fprintf(stdout, "%s absent: %s\n", dahdidev, strerror(errno));
 		return -1;
 	}
 
@@ -1117,6 +1060,7 @@ static int do_calibrate(int startdev, int enddev, int calibtype, char* configfil
 	int res = 0;
 	int configfd, fd;
 	int devno = 0;
+	char dahdidev[80] = "";
 	struct wctdm_echo_coefs coefs;
 	
 	configfd = open(configfile, O_CREAT|O_TRUNC|O_WRONLY, 0666);
@@ -1127,12 +1071,15 @@ static int do_calibrate(int startdev, int enddev, int calibtype, char* configfil
 	}
 
 	for (devno = startdev; devno <= enddev; devno++) {
-		fd = channel_open(devno);
+		snprintf(dahdidev, sizeof(dahdidev), "%s/%d", dahdipath, devno);
+
+		fd = open(dahdidev, O_RDWR);
 		if (fd < 0) {
+			fprintf(stdout, "%s absent: %s\n", dahdidev, strerror(errno));
 			continue;
 		}
 
-		fprintf(stdout, "Tuning module %d\n", devno);
+		fprintf(stdout, "Tuning module %s\n", dahdidev);
 		
 		if (1 == calibtype)
 			res = acim_tune(fd, dialstr, delayuntilsilence, silencegoodfor, &coefs);
@@ -1191,7 +1138,6 @@ int main(int argc , char **argv)
 {
 	int startdev = 1; /* -b */
 	int stopdev = 252; /* -e */
-	int dev_range = 0; /* false */
 	int calibtype = 2; /* -t */
 	int waveformtype = -1; /* -w multi-tone by default.  If > 0, single tone of specified frequency */
 	int delaytosilence = 0; /* -l */
@@ -1233,11 +1179,9 @@ int main(int argc , char **argv)
 				continue;
 			case 'b':
 				startdev = moreargs ? atoi(argv[++i]) : startdev;
-				dev_range = 1;
 				break;
 			case 'e':
 				stopdev = moreargs ? atoi(argv[++i]) : stopdev;
-				dev_range = 1;
 				break;
 			case 't':
 				calibtype = moreargs ? atoi(argv[++i]) : calibtype;
@@ -1307,13 +1251,13 @@ int main(int argc , char **argv)
 	if (docalibrate){
 		res = do_calibrate(startdev, stopdev, calibtype, configfile, dialstr, delaytosilence, silencegoodfor);
 		if (!res)
-			return do_set(configfile, dev_range, startdev, stopdev);
+			return do_set(configfile);	
 		else
 			return -1;
 	}
 
 	if (doset)
-		return do_set(configfile, dev_range, startdev, stopdev);
+		return do_set(configfile);
 				
 	if (dodump){
 		res = do_dump(startdev, dialstr, delaytosilence, silencegoodfor, waveformtype);

fxstest.c

@@ -33,7 +33,6 @@
 #include <stdlib.h>
 #include <unistd.h>
 #include <sys/ioctl.h>
-#include <sys/stat.h>
 #include <dahdi/user.h>
 #include <dahdi/wctdm_user.h>
 
@@ -102,41 +101,6 @@ static int dahdi_ring_phone(int fd)
 	return res;
 }
 
-int channel_open(const char *name)
-{
-	int	channo, fd;
-	struct	stat filestat;
-	const char *DEVICE = "/dev/dahdi/channel";
-
-	/* stat file, if character device, open it */
-	channo = strtoul(name, NULL, 10);
-	fd = stat(name, &filestat);
-	if (!fd && S_ISCHR(filestat.st_mode)) {
-		fd = open(name, O_RDWR, 0600);
-		if (fd < 0) {
-			perror(name);
-			return -1;
-		}
-	/* try out the dahdi_specify interface */
-	} else if (channo > 0) {
-		fd = open(DEVICE, O_RDWR, 0600);
-		if (fd < 0) {
-			perror(DEVICE);
-			return -1;
-		}
-		if (ioctl(fd, DAHDI_SPECIFY, &channo) < 0) {
-			perror("DAHDI_SPECIFY ioctl failed");
-			return -1;
-		}
-	/* die */
-	} else {
-		fprintf(stderr, "Specified channel is not a valid character "
-			"device or channel number");
-		return -1;
-	}
-	return fd;
-}
-
 int main(int argc, char *argv[])
 {
 	int fd;
@@ -157,7 +121,7 @@ int main(int argc, char *argv[])
 		       "       dtmfcid - create a dtmf cid spill without polarity reversal\n");
 		exit(1);
 	}
-	fd = channel_open(argv[1]);
+	fd = open(argv[1], O_RDWR);
 	if (fd < 0) {
 		fprintf(stderr, "Unable to open %s: %s\n", argv[1], strerror(errno));
 		exit(1);

hdlcgen.c

@@ -40,7 +40,7 @@
 #define RANDOM "/dev/urandom"			/* Not genuinely random */
 /* #define RANDOM "/dev/random" */		/* Quite genuinely random */
 
-int myread(int fd, unsigned char *buf, int len)
+int myread(int fd, char *buf, int len)
 {
 	int sofar;
 	int res;

hdlcstress.c

@@ -107,12 +107,13 @@ static struct fasthdlc_state fs;
 
 void send_packet(unsigned char *buf, int len)
 {
+	int res;
 	int x;
 	unsigned char outbuf[BLOCK_SIZE];
 	int pos=0;
 	unsigned int fcs = PPP_INITFCS;
 	if (hdlcmode)
-		write(fd, buf, len + 2);
+		res = write(fd, buf, len + 2);
 	else {
 		for (x=0;x<len;x++) {
 			if (fasthdlc_tx_load(&fs, buf[x]))

hotplug/Makefile.am

@@ -1,11 +0,0 @@
-
-nobase_dist_dahditools_SCRIPTS	= \
-	dahdi_handle_device	\
-	dahdi_span_config	\
-	dahdi_auto_assign_compat	\
-	span_config.d/10-dahdi-cfg	\
-	span_config.d/20-fxotune	\
-	span_config.d/50-asterisk	\
-	handle_device.d/10-span-types	\
-	handle_device.d/20-span-assignments	\
-	#

hotplug/dahdi_auto_assign_compat

@@ -1,30 +0,0 @@
-#! /bin/sh
-
-devdir='/sys/bus/dahdi_devices/devices'
-
-# DAHDI is loaded?
-if [ ! -d "$devdir" ]; then
-	exit 0
-fi
-
-devices_by_registration_time() {
-	grep -H '' $devdir/*/registration_time 2>/dev/null | \
-		sed 's,/registration_time:,\t,' | \
-		sort -k 2,2
-}
-
-# First assign non-Astribank devices
-devices_by_registration_time | \
-	grep -v '/astribanks:' | \
-	while read devpath time; do
-		echo >&2 "D: auto '$devpath'"
-		dahdi_span_assignments auto "$devpath"
-	done
-
-# Now handle Astribanks
-unmatched="`dahdi_span_assignments unmatched`"
-if [ -n "$unmatched" ]; then
-	# Only if astribanks are not matched in span-assignments.conf
-	# TODO: have dahdi_registration run only on "$unmatched"
-	LC_ALL=C dahdi_registration -Rv on
-fi

hotplug/dahdi_handle_device

@@ -1,87 +0,0 @@
-#! /bin/sh
-#
-# /usr/share/dahdi/dahdi_handle_device
-#
-# Called by UDEV when a dahdi device is added/removed
-#
-
-me=`basename $0`
-dir=`dirname $0`
-LOGGER="logger -i -t '$me'"
-NAME=`basename "$DEVPATH" | tr -c 'A-Za-z0-9-' '_'`
-
-# Always redirect stderr somewhere, otherwise the shell script will die
-# when it tries to do I/O related stuff on closed file descriptor.
-# Our default is to throw it down the bit-bucket.
-exec 2> /dev/null
-# If you wish to trace this script:
-#exec 2> "/tmp/${me}.$NAME" 1>&2
-#exec 2> /dev/console
-
-# Our directory in the beginning, so we can use local lab setup
-PATH="$dir:/usr/sbin:/sbin:/usr/bin:/bin"
-export PATH
-
-set -e
-
-#echo >&2 "$0($ACTION): DEBUG($# args): '$*'"
-
-# Do we have a configuration?
-if [ -f /etc/dahdi/init.conf ]; then
-	. /etc/dahdi/init.conf
-fi
-
-if [ "$DAHDI_UDEV_DISABLE_DEVICES" = 'yes' ]; then
-	echo "DAHDI_UDEV_DISABLE_DEVICES=yes. Skip $DEVPATH" | $LOGGER
-	exit 0
-fi
-
-# Can we pass a different value so we can use
-# alternate (testing) configuration?
-# Meanwhile, make it hard-coded.
-DAHDICONFDIR='/etc/dahdi'
-export DAHDICONFDIR
-
-run_parts() {
-	# Have our internal "run-parts" (adapted from Fedora),
-	# as implementations differ
-	for i in `LC_ALL=C; ls -d $dir/handle_device.d/*[!~,] 2>/dev/null` ; do
-		[ -d "$i" ] && continue
-		[ ! -x "$i" ] && continue
-		# Don't run *.{rpmsave,rpmorig,rpmnew,swp,cfsaved} files
-		case "$i" in
-		*.cfsaved|*.rpmsave|*.rpmorig|*.rpmnew|*.swp|*,v)
-			continue
-			;;
-		esac
-		echo "D: Running '$i'"
-		"$i"
-	done
-}
-
-case "$ACTION" in
-add)
-	echo "$ACTION: $DEVPATH" | $LOGGER
-
-	# Check if we can safely do our job
-	if [ ! -f /sys/module/dahdi/parameters/auto_assign_spans ]; then
-		echo "Old driver (no auto_assign_spans parameter). Skip $DEVPATH" | $LOGGER
-		exit 0
-	fi
-	if [ `cat /sys/module/dahdi/parameters/auto_assign_spans` -ne 0 ]; then
-		echo "auto_assign_spans=1. Skip $DEVPATH" | $LOGGER
-		exit 0
-	fi
-
-	# Background run -- don't block udev
-	run_parts 2>&1 < /dev/null | $LOGGER &
-	;;
-remove)
-	echo "$ACTION: $DEVPATH" | $LOGGER
-	# Background run -- don't block udev
-	run_parts 2>&1 < /dev/null | $LOGGER &
-	;;
-*)
-	echo "UNHANDLED: $ACTION: $DEVPATH" | $LOGGER
-	;;
-esac

hotplug/dahdi_span_config

@@ -1,97 +0,0 @@
-#! /bin/sh
-#
-# /usr/share/dahdi/dahdi_span_config
-#
-# Called by UDEV when a dahdi span is added/removed
-#
-
-me=`basename $0`
-dir=`dirname $0`
-LOGGER="logger -i -t '$me'"
-NAME=`basename "$DEVPATH" | tr -c 'A-Za-z0-9-' '_'`
-
-exec 2> /dev/null
-# Always redirect stderr somewhere, otherwise the shell script will die
-# when it tries to do I/O related stuff on closed file descriptor.
-# Our default is to throw it down the bit-bucket.
-#exec 2> /dev/console
-## If you wish to trace this script:
-#exec 2> "/tmp/${me}.$NAME" 1>&2
-
-# Our directory in the beginning, so we can use local lab setup
-PATH="$dir:/usr/sbin:/sbin:/usr/bin:/bin"
-export PATH
-
-set -e
-
-#echo >&2 "$0($ACTION): DEBUG($# args): '$*'"
-
-# Do we have a configuration?
-if [ -f /etc/dahdi/init.conf ]; then
-	. /etc/dahdi/init.conf
-fi
-
-if [ "$DAHDI_UDEV_DISABLE_SPANS" = 'yes' ]; then
-	echo "DAHDI_UDEV_DISABLE_SPANS=yes. Skip $DEVPATH" | $LOGGER
-	exit 0
-fi
-
-# Can we pass a different value so we can use
-# alternate (testing) configuration?
-# Meanwhile, make it hard-coded.
-DAHDICONFDIR='/etc/dahdi'
-export DAHDICONFDIR
-
-run_parts() {
-	# Have our internal "run-parts" (adapted from Fedora),
-	# as implementations differ
-	for i in `LC_ALL=C; ls -d $dir/span_config.d/*[!~,] 2>/dev/null` ; do
-		[ -d "$i" ] && continue
-		[ ! -x "$i" ] && continue
-		# Don't run *.{rpmsave,rpmorig,rpmnew,swp,cfsaved} files
-		case "$i" in
-		*.cfsaved|*.rpmsave|*.rpmorig|*.rpmnew|*.swp|*,v)
-			continue
-			;;
-		esac
-		#echo "D: Running '$i'"
-		"$i"
-	done
-}
-
-case "$ACTION" in
-add)
-	echo "$ACTION: $DEVPATH" | $LOGGER
-
-	# Old driver. These scripts probably won't work anyway.
-	if [ ! -f /sys/module/dahdi/parameters/auto_assign_spans ]; then
-		if [ -f /sys/module/dahdi ]; then
-			$LOGGER "Old driver (no auto_assign_spans parameter). Skip $DEVPATH"
-			exit 0
-		fi
-	fi
-
-	if [ $(cat /sys/module/dahdi/parameters/auto_assign_spans) -ne 0 ]; then
-		$LOGGER "auto_assign_spans=1. Skip $DEVPATH"
-		exit 0
-	fi
-
-	# Set variables
-	span_devpath="/sys$DEVPATH"
-	SPANNO=`echo "$span_devpath" | sed 's,.*/span-,,'`
-	BASECHAN=`cat "$span_devpath/basechan"`
-	CHANNELS=`cat "$span_devpath/channels"`
-	ENDCHAN=`expr "$BASECHAN" + "$CHANNELS" - 1`
-	export SPANNO BASECHAN CHANNELS ENDCHAN
-	# Background run -- don't block udev
-	run_parts 2>&1 < /dev/null | $LOGGER &
-	;;
-remove|online|offline)
-	# Nothing to do yet...
-	echo "$ACTION: $DEVPATH" | $LOGGER
-	;;
-*)
-	echo "UNHANDLED: $ACTION: $DEVPATH" | $LOGGER
-	;;
-esac
-

hotplug/handle_device.d/10-span-types

@@ -1,12 +0,0 @@
-#! /bin/sh
-
-case "$ACTION" in
-add)
-	;;
-*)
-	exit 0
-esac
-
-if [ -r "$DAHDICONFDIR/span-types.conf" ]; then
-	dahdi_span_types set "/sys$DEVPATH"
-fi

hotplug/handle_device.d/20-span-assignments

@@ -1,15 +0,0 @@
-#! /bin/sh
-
-case "$ACTION" in
-add)
-	;;
-*)
-	exit 0
-esac
-
-# For now, handle only spans in assigned-spans.conf
-# We leave other cases to /etc/init.d/dahdi, so
-# legacy ordering can be preserved.
-if [ -r "$DAHDICONFDIR/assigned-spans.conf" ]; then
-	dahdi_span_assignments add "/sys$DEVPATH"
-fi

hotplug/handle_device.d/30-xpp-sync

@@ -1,18 +0,0 @@
-#! /bin/sh
-
-# Run xpp_sync whenever an Astribank is connected.
-
-# May be set in /etc/dahdi/init.conf
-XPP_SYNC=${XPP_SYNC:-auto}
-
-case "$ACTION" in
-add) ;;
-*) exit 0 ;;
-esac
-
-case "${DEVPATH##*/}" in
-astribanks:*) ;;
-*) exit 0 ;;
-esac
-
-xpp_sync "$XPP_SYNC"

hotplug/span_config.d/10-dahdi-cfg

@@ -1,28 +0,0 @@
-#! /bin/sh
-
-if [ "$ACTION" != 'add' ]; then
-	# Nothing to do here
-	exit 0
-fi
-
-# Sanity check
-checkit=`"dahdi_cfg" --help 2>&1 | grep -- '-S' | wc -l`
-if [ "$checkit" != 1 ]; then
-	echo "Bad dahdi_cfg (no -S support). Skipping"
-	exit 0
-fi
-
-run_dahdi_cfg() {
-	echo "dahdi_cfg: span $SPANNO <$BASECHAN-$ENDCHAN> ($DEVPATH)"
-	dahdi_cfg -c "$cfg_file" -S "$SPANNO" -C "$BASECHAN-$ENDCHAN"
-}
-
-# Configure DAHDI
-cfg_file="$DAHDICONFDIR/system.conf"
-if [ -r "$cfg_file" ]; then
-	run_dahdi_cfg
-else
-	echo "Using auto-generated config for dahdi_cfg"
-	cfg_file='-'
-	DAHDI_CONF_FILE="$cfg_file" dahdi_genconf system | run_dahdi_cfg
-fi

hotplug/span_config.d/20-fxotune

@@ -1,12 +0,0 @@
-#! /bin/sh
-
-if [ "$ACTION" != 'add' ]; then
-	# Nothing to do here
-	exit 0
-fi
-
-fxotune_cfg='/etc/fxotune.conf'
-if [ -r "$fxotune_cfg" ]; then
-	echo "fxotune: span $SPANNO <$BASECHAN-$ENDCHAN> ($DEVPATH)"
-	fxotune -s -b "$BASECHAN" -e "$ENDCHAN"
-fi

hotplug/span_config.d/50-asterisk

@@ -1,14 +0,0 @@
-#! /bin/sh
-
-# This file, if installed under /usr/share/dahdi/span_config.d/ , will
-# attempt to add a newly-generated span to a running copy of Asterisk.
-# Asterisk has to be running (if not: it will pick the span on its
-# startup), and has to have the channels already configured.
-
-if [ "$ACTION" != 'add' ]; then
-	# Nothing to do here
-	exit 0
-fi
-
-# Add to asterisk
-asterisk -rx "dahdi create channels $BASECHAN $ENDCHAN"

init.conf.sample

@@ -17,8 +17,3 @@
 #XPP_FIRMWARE_DIR=/usr/share/dahdi
 #XPP_HOTPLUG_DISABLED=yes
 #XPP_HOTPLUG_DAHDI=yes
-#ASTERISK_SUPPORTS_DAHDI_HOTPLUG=yes
-
-# Disable udev handling:
-#DAHDI_UDEV_DISABLE_DEVICES=yes
-#DAHDI_UDEV_DISABLE_SPANS=yes

makeopts.in

@@ -38,8 +38,6 @@ PBX_USB=@PBX_USB@
 USB_LIB=@USB_LIB@
 USB_INCLUDE=@USB_INCLUDE@
 
-PBX_HDLC=@PBX_HDLC@
-
 DAHDI_INCLUDE=@DAHDI_INCLUDE@
 
 USE_SELINUX=@USE_SELINUX@

menuselect/Makefile

@@ -0,0 +1,123 @@
+#
+# Asterisk -- A telephony toolkit for Linux.
+# 
+# Makefile for Menuselect
+#
+# Copyright (C) 2005-2008, Digium, Inc.
+#
+# Russell Bryant <russell@digium.com>
+#
+# This program is free software, distributed under the terms of
+# the GNU General Public License
+#
+
+# even though we could use '-include makeopts' here, use a wildcard
+# lookup anyway, so that make won't try to build makeopts if it doesn't
+# exist (other rules will force it to be built if needed)
+ifneq ($(wildcard makeopts),)
+  include makeopts
+endif
+
+.PHONY: clean dist-clean distclean test ntest ctest gtest
+
+# Basic set of sources and flags/libraries/includes
+OBJS:=menuselect.o strcompat.o
+CFLAGS+=-g -D_GNU_SOURCE -Wall
+
+ifeq ($(MENUSELECT_DEBUG),yes)
+  CFLAGS += -DMENUSELECT_DEBUG
+endif
+
+ifdef NCURSES_LIB
+  C_OBJS += menuselect_curses.o
+  C_LIBS +=$(NCURSES_LIB)
+  C_INCLUDE += $(NCURSES_INCLUDE)
+  ALL_TGTS += cmenuselect
+else
+  ifdef CURSES_LIB
+    C_OBJS += menuselect_curses.o
+    C_LIBS +=$(CURSES_LIB)
+    C_INCLUDE += $(CURSES_INCLUDE)
+    ALL_TGTS += cmenuselect
+  endif
+endif
+
+ifdef GTK2_LIB
+  G_OBJS += menuselect_gtk.o
+  G_LIBS += $(GTK2_LIB)
+  G_INCLUDE += $(GTK2_INCLUDE)
+  ALL_TGTS += gmenuselect
+endif
+
+ifdef NEWT_LIB
+  N_OBJS += menuselect_newt.o
+  N_LIBS += $(NEWT_LIB)
+  N_INCLUDE += $(NEWT_INCLUDE)
+  ALL_TGTS += nmenuselect
+endif
+
+M_OBJS += menuselect_stub.o
+ALL_TGTS += menuselect
+
+all: $(ALL_TGTS)
+
+$(OBJS) $(C_OBJS) $(N_OBJS) $(G_OBJS) $(M_OBJS): autoconfig.h menuselect.h
+
+makeopts autoconfig.h: autoconfig.h.in makeopts.in
+	@./configure $(CONFIGURE_SILENT)
+
+$(ALL_TGTS): mxml/libmxml.a
+
+ifdef C_OBJS
+menuselect_curses.o: CFLAGS+=$(C_INCLUDE)
+cmenuselect: $(OBJS) $(C_OBJS)
+	$(CC) $(LDFLAGS) -o $@ $^ $(C_LIBS)
+else
+cmenuselect:
+endif
+
+ifdef G_OBJS
+menuselect_gtk.o: CFLAGS+=$(G_INCLUDE)
+gmenuselect: $(OBJS) $(G_OBJS)
+	$(CC) $(LDFLAGS) -o $@ $^ $(G_LIBS)
+else
+gmenuselect:
+endif
+
+ifdef N_OBJS
+menuselect_newt.o: CFLAGS+=$(N_INCLUDE)
+nmenuselect: $(OBJS) $(N_OBJS)
+	$(CC) $(LDFLAGS) -o $@ $^ $(N_LIBS)
+else
+nmenuselect:
+endif
+
+menuselect: $(OBJS) $(M_OBJS)
+	$(CC) $(LDFLAGS) -o $@ $^ $(M_LIBS)
+
+mxml/libmxml.a:
+	@if test ! -f mxml/Makefile ; then cd mxml && ./configure ; fi
+	@$(MAKE) -C mxml libmxml.a
+
+test: menuselect
+	(cd test; ../$< menuselect.makeopts)
+
+ctest: cmenuselect
+	(cd test; ../$< menuselect.makeopts)
+
+gtest: gmenuselect
+	(cd test; ../$< menuselect.makeopts)
+
+ntest: nmenuselect
+	(cd test; ../$< menuselect.makeopts)
+
+clean:
+	rm -f menuselect cmenuselect gmenuselect nmenuselect $(OBJS) $(M_OBJS) $(C_OBJS) $(G_OBJS) $(N_OBJS)
+	@if test -f mxml/Makefile ; then $(MAKE) -C mxml clean ; fi
+
+dist-clean: distclean
+
+distclean: clean
+	@if test -f mxml/Makefile ; then $(MAKE) -C mxml distclean ; fi
+	rm -f autoconfig.h config.status config.log makeopts
+	rm -rf autom4te.cache

menuselect/README

@@ -0,0 +1,179 @@
+MENUSELECT
+Copyright (C) 2005-2006, Digium, Inc.
+Russell Bryant <russell@digium.com>
+-------------------------------------------------------------------------------
+
+
+ABOUT
+
+Menuselect is a tool designed to be used in conjunction with GNU make. It
+allows for an XML specification of Makefile variables and optional space
+delimited values of these variables. These values can then be used in the
+Makefile to make various decisions during the build process.
+
+Menuselect also provides a mechanism for dependency checking for each possible
+member (value) of each category (Makefile variable). These dependencies are
+generally checked by using autoconf and the results provided to menuselect. If
+dependencies for a member are not met, the user will not be allowed to make
+that selection. In the same way the menuselect does dependency checking, it
+also does conflict checking. If a listed conflict for a member is met, then
+the user will not be allowed to select it.
+
+For use with automated builds or when the user has no desire to make selections
+different than the defined defaults, menuselect can generate a default output
+file for use in the build.
+
+Menuselect can also do a sanity check on existing input files. If any member
+has been selected that has conflicts or unmet dependencies, then menuselect
+will exit with an error and output to notify the user of the situation. This is
+typically done at the beginning of the build process to ensure that given all
+of the known information, the build is going to be successful.
+
+
+MENUSELECT DEPENDENCIES
+
+libncurses -- This is needed for the curses frontend.
+libnewt -- This is needed for the newt frontend (optional).
+libmxml -- This library, Mini-XML, is used for XML parsing. 
+           (http://www.easysw.com/~mike/mxml/)
+	   (Asterisk uses the code in http://svn.digium.com/svn/mxml/ )
+
+
+ENVIRONMENT SETUP
+
+The file menuselect.h contains a couple of defines which specify locations for
+various files.  These locations are relative to the directory from which
+menuselect will be executed.
+
+#define OUTPUT_MAKEOPTS_DEFAULT "menuselect.makeopts"
+This is the location where the menuselect output will be saved.
+
+#define MENUSELECT_DEPS         "build_tools/menuselect-deps"
+This is the location where menuselect will expect to find the input file that
+provides dependency and conflict information. More information on the format of
+this file can be found in the section about dependency and conflict checking.
+
+
+DEPENDENCY AND CONFLICT CHECKING
+
+Members may have as many conflicts and dependencies specified as needed. An
+example of the MENUSELECT_DEPS file would look like this:
+
+DEPENDENCY1=1
+DEPENDENCY2=0
+CONFLICT1=0
+
+In this case, "DEPENDENCY1" has been met, "DEPENDENCY2" has not been met, and
+"CONFLICT1" is not present.
+
+To ask menuselect to do a background sanity check on dependencies and
+conflicts, it can be called like this:
+
+./menuselect --check-deps <input_file1> [input_file2] [...]
+
+The format of the input files must be of the same format menuselect uses to
+create the OUPUT_MAKEOPTS_DEFAULT.
+
+
+ENABLING AND DISABLING OPTIONS FROM THE COMMAND LINE
+
+If you would like menuselect to update choices via the command line, it can be
+done with the following syntax:
+
+Enable an option:
+   $ menuselect/menuselect --enable TEST_FRAMEWORK menuselect.makeopts
+
+Enable all options in a category:
+   $ menuselect/menuselect --enable-category MENUSELECT_TEST menuselect.makeopts
+
+Disable an option:
+   $ menuselect/menuselect --disable TEST_FRAMEWORK menuselect.makeopts
+
+Disable all options in a category:
+   $ menuselect/menuselect --disable-category MENUSELECT_TEST menuselect.makeopts
+
+
+SETTING UP AVAILABLE OPTIONS
+
+The XML specification for the menu lives in the file "menuselect-tree" and should
+be in the same directory that menuselect will be executed from. An example
+menuselect-tree file as used in the Asterisk project (http://www.asterisk.org) is
+provided in example_menuselect-tree
+
+Menu:
+   The top level tag in menuselect-tree is the <menu> tag. All of the categories
+   reside inside of the <menu> ... </menu> block.
+
+Menu Attributes:
+   name="Asterisk Module Selection"
+   This specifies the title of the menu. It is displayed at the top of the
+   screen when using the curses frontend
+
+Categories:
+   A <category> contains members. The category tag can contain a number of
+   different attributes to specify different behavior.
+
+Category Attributes:
+   name="MENUSELECT_APPS"
+   The name attribute is required. This is the name of the variable that will
+   be in the output from menuselect.
+	
+   displayname="Applications"
+   If this is specfied, this is what will be shown in the menu to the user.
+
+   positive_output="yes"
+   The default for menuselect is to output all of the members of a category
+   that are *not* selected. This is because it is often convenient to be able
+   to define a full list in the Makefile and then filter out the results from
+   menuselect. Using GNU make, an example of this would be:
+   APPS:=$(filter-out $(MENUSELECT_APPS),$(APPS)) 
+
+   remove_on_change=".lastclean"
+   This attribute can contain a space delimited list of files to be deleted
+   when it is time to build an output file if any of the members of this
+   category have changed values from their values for existing input when the
+   application was started.
+
+Members:
+   A <member> contains conflicts and dependencies. The member tag can contain a
+   number of different attributes to specify different behavior.
+
+Member Attributes:
+   name="app_meetme"
+   The name attribute is required. This is the value that will be added to the 
+   variable specified by the category when selected (or not selected) depending
+   on the setting of the positive_output attribute of the category.
+	
+   displayname="Call Conferencing Application"
+   If this is specified, this will be provided as a description of this member
+   when the cursor is on it in the menu.
+
+   remove_on_change="apps/app_meetme.o apps/app_meetme.so"
+   This attribute can contain a space delimeted list of files to be deleted
+   when it is time to build an output file if the value of this member has
+   changed from its value in any existing input when the application was
+   started.
+
+Dependencies:
+   A dependency for a <member> is specified using a <depend> tag. The name of
+   the dependency corresponds to names in the MENUSELECT_DEPS file. This is an
+   example of specifying a dependency for a member:
+      <member name="app_meetme">
+         <depend>zaptel</depend>
+      </member>   
+
+Conflicts:
+   A conflict for a <member> is specified using a <conflict> tag. The name of
+   the conflict corresponds to names in the MENUSELECT_DEPS file. This is an
+   example of specifying a dependency for a member:
+      <member name="res_musiconhold">
+         <conflict>win32</conflict>
+      </member>
+
+
+REPORTING BUGS
+
+Any bug reports or feature enhancement submissions to menuselect should be
+submitted at https://issues.asterisk.org/
+
+Thank you!

menuselect/acinclude.m4

@@ -0,0 +1,199 @@
+# Helper function to check for gcc attributes.
+# AST_GCC_ATTRIBUTE([attribute name], [attribute syntax], [attribute scope], [makeopts flag])
+
+AC_DEFUN([AST_GCC_ATTRIBUTE],
+[
+AC_MSG_CHECKING(checking for compiler 'attribute $1' support)
+saved_CFLAGS="$CFLAGS"
+CFLAGS="$CFLAGS -Wall -Wno-unused -Werror"
+m4_ifval([$4],$4=0)
+
+if test "x$2" = "x"
+then
+AC_COMPILE_IFELSE(
+	AC_LANG_PROGRAM([$3 void __attribute__(($1)) *test(void *muffin, ...) {return (void *) 0;}],
+			[]),
+	AC_MSG_RESULT(yes)
+	m4_ifval([$4],$4=1)
+	AC_DEFINE_UNQUOTED([HAVE_ATTRIBUTE_$1], 1, [Define to 1 if your GCC C compiler supports the '$1' attribute.]),
+	AC_MSG_RESULT(no)
+)
+else
+AC_COMPILE_IFELSE(
+	AC_LANG_PROGRAM([$3 void __attribute__(($2)) *test(void *muffin, ...) {return (void *) 0;}],
+			[]),
+	AC_MSG_RESULT(yes)
+	m4_ifval([$4],$4=1)
+	AC_DEFINE_UNQUOTED([HAVE_ATTRIBUTE_$1], 1, [Define to 1 if your GCC C compiler supports the '$1' attribute.]),
+	AC_MSG_RESULT(no)
+)
+fi
+
+m4_ifval([$4],[AC_SUBST($4)])
+CFLAGS="$saved_CFLAGS"
+])
+
+# AST_EXT_LIB_SETUP([package symbol name], [package friendly name], [package option name], [additional help text])
+
+AC_DEFUN([AST_EXT_LIB_SETUP],
+[
+$1_DESCRIP="$2"
+$1_OPTION="$3"
+AC_ARG_WITH([$3], AC_HELP_STRING([--with-$3=PATH],[use $2 files in PATH $4]),[
+case ${withval} in
+     n|no)
+     USE_$1=no
+     ;;
+     y|ye|yes)
+     $1_MANDATORY="yes"
+     ;;
+     *)
+     $1_DIR="${withval}"
+     $1_MANDATORY="yes"
+     ;;
+esac
+])
+PBX_$1=0
+AC_SUBST([$1_LIB])
+AC_SUBST([$1_INCLUDE])
+AC_SUBST([PBX_$1])
+])
+
+# AST_EXT_LIB_CHECK([package symbol name], [package library name], [function to check], [package header], [additional LIB data])
+
+AC_DEFUN([AST_EXT_LIB_CHECK],
+[
+if test "${USE_$1}" != "no"; then
+   pbxlibdir=""
+   if test "x${$1_DIR}" != "x"; then
+      if test -d ${$1_DIR}/lib; then
+      	 pbxlibdir="-L${$1_DIR}/lib"
+      else
+      	 pbxlibdir="-L${$1_DIR}"
+      fi
+   fi
+   AC_CHECK_LIB([$2], [$3], [AST_$1_FOUND=yes], [AST_$1_FOUND=no], ${pbxlibdir} $5)
+
+   if test "${AST_$1_FOUND}" = "yes"; then
+      $1_LIB="-l$2 $5"
+      $1_HEADER_FOUND="1"
+      if test "x${$1_DIR}" != "x"; then
+         $1_LIB="${pbxlibdir} ${$1_LIB}"
+	 $1_INCLUDE="-I${$1_DIR}/include"
+	 if test "x$4" != "x" ; then
+	    AC_CHECK_HEADER([${$1_DIR}/include/$4], [$1_HEADER_FOUND=1], [$1_HEADER_FOUND=0] )
+	 fi
+      else
+	 if test "x$4" != "x" ; then
+            AC_CHECK_HEADER([$4], [$1_HEADER_FOUND=1], [$1_HEADER_FOUND=0] )
+	 fi
+      fi
+      if test "x${$1_HEADER_FOUND}" = "x0" ; then
+         if test ! -z "${$1_MANDATORY}" ;
+         then
+            AC_MSG_NOTICE( ***)
+            AC_MSG_NOTICE( *** It appears that you do not have the $2 development package installed.)
+            AC_MSG_NOTICE( *** Please install it to include ${$1_DESCRIP} support, or re-run configure)
+            AC_MSG_NOTICE( *** without explicitly specifying --with-${$1_OPTION})
+            exit 1
+         fi
+         $1_LIB=""
+         $1_INCLUDE=""
+         PBX_$1=0
+      else
+         PBX_$1=1
+         AC_DEFINE_UNQUOTED([HAVE_$1], 1, [Define to indicate the ${$1_DESCRIP} library])
+      fi
+   elif test ! -z "${$1_MANDATORY}";
+   then
+      AC_MSG_NOTICE(***)
+      AC_MSG_NOTICE(*** The ${$1_DESCRIP} installation on this system appears to be broken.)
+      AC_MSG_NOTICE(*** Either correct the installation, or run configure)
+      AC_MSG_NOTICE(*** without explicitly specifying --with-${$1_OPTION})
+      exit 1
+   fi
+fi
+])
+
+
+AC_DEFUN(
+[AST_CHECK_GNU_MAKE], [AC_CACHE_CHECK([for GNU make], [ac_cv_GNU_MAKE],
+   ac_cv_GNU_MAKE='Not Found' ;
+   ac_cv_GNU_MAKE_VERSION_MAJOR=0 ;
+   ac_cv_GNU_MAKE_VERSION_MINOR=0 ;
+   for a in make gmake gnumake ; do
+      if test -z "$a" ; then continue ; fi ;
+      if ( sh -c "$a --version" 2> /dev/null | grep GNU  2>&1 > /dev/null ) ;  then
+         ac_cv_GNU_MAKE=$a ;
+         ac_cv_GNU_MAKE_VERSION_MAJOR=`$ac_cv_GNU_MAKE --version | grep "GNU Make" | cut -f3 -d' ' | cut -f1 -d'.'`
+         ac_cv_GNU_MAKE_VERSION_MINOR=`$ac_cv_GNU_MAKE --version | grep "GNU Make" | cut -f2 -d'.' | cut -c1-2`
+         break;
+      fi
+   done ;
+) ;
+if test  "x$ac_cv_GNU_MAKE" = "xNot Found"  ; then
+   AC_MSG_ERROR( *** Please install GNU make.  It is required to build Asterisk!)
+   exit 1
+fi
+AC_SUBST([GNU_MAKE], [$ac_cv_GNU_MAKE])
+])
+
+# AST_FUNC_FORK
+# -------------
+AN_FUNCTION([fork],  [AST_FUNC_FORK])
+AN_FUNCTION([vfork], [AST_FUNC_FORK])
+AC_DEFUN([AST_FUNC_FORK],
+[AC_REQUIRE([AC_TYPE_PID_T])dnl
+AC_CHECK_HEADERS(vfork.h)
+AC_CHECK_FUNCS(fork vfork)
+if test "x$ac_cv_func_fork" = xyes; then
+  _AST_FUNC_FORK
+else
+  ac_cv_func_fork_works=$ac_cv_func_fork
+fi
+if test "x$ac_cv_func_fork_works" = xcross; then
+  case $host in
+    *-*-amigaos* | *-*-msdosdjgpp* | *-*-uclinux* | *-*-linux-uclibc* )
+      # Override, as these systems have only a dummy fork() stub
+      ac_cv_func_fork_works=no
+      ;;
+    *)
+      ac_cv_func_fork_works=yes
+      ;;
+  esac
+  AC_MSG_WARN([result $ac_cv_func_fork_works guessed because of cross compilation])
+fi
+ac_cv_func_vfork_works=$ac_cv_func_vfork
+if test "x$ac_cv_func_vfork" = xyes; then
+  _AC_FUNC_VFORK
+fi;
+if test "x$ac_cv_func_fork_works" = xcross; then
+  ac_cv_func_vfork_works=$ac_cv_func_vfork
+  AC_MSG_WARN([result $ac_cv_func_vfork_works guessed because of cross compilation])
+fi
+
+if test "x$ac_cv_func_vfork_works" = xyes; then
+  AC_DEFINE(HAVE_WORKING_VFORK, 1, [Define to 1 if `vfork' works.])
+else
+  AC_DEFINE(vfork, fork, [Define as `fork' if `vfork' does not work.])
+fi
+if test "x$ac_cv_func_fork_works" = xyes; then
+  AC_DEFINE(HAVE_WORKING_FORK, 1, [Define to 1 if `fork' works.])
+fi
+])# AST_FUNC_FORK
+
+
+# _AST_FUNC_FORK
+# -------------
+AC_DEFUN([_AST_FUNC_FORK],
+  [AC_CACHE_CHECK(for working fork, ac_cv_func_fork_works,
+    [AC_RUN_IFELSE(
+      [AC_LANG_PROGRAM([AC_INCLUDES_DEFAULT],
+	[
+	  /* By Ruediger Kuhlmann. */
+	  return fork () < 0;
+	])],
+      [ac_cv_func_fork_works=yes],
+      [ac_cv_func_fork_works=no],
+      [ac_cv_func_fork_works=cross])])]
+)# _AST_FUNC_FORK

menuselect/aclocal.m4

@@ -0,0 +1,14 @@
+# generated automatically by aclocal 1.11.1 -*- Autoconf -*-
+
+# Copyright (C) 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004,
+# 2005, 2006, 2007, 2008, 2009  Free Software Foundation, Inc.
+# This file is free software; the Free Software Foundation
+# gives unlimited permission to copy and/or distribute it,
+# with or without modifications, as long as this notice is preserved.
+
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY, to the extent permitted by law; without
+# even the implied warranty of MERCHANTABILITY or FITNESS FOR A
+# PARTICULAR PURPOSE.
+
+m4_include([acinclude.m4])

menuselect/autoconfig.h.in

@@ -0,0 +1,128 @@
+/* autoconfig.h.in.  Generated from configure.ac by autoheader.  */
+
+#ifndef MENUSELECT_AUTOCONFIG_H
+#define MENUSELECT_AUTOCONFIG_H
+
+#ifndef _REENTRANT
+#define _REENTRANT
+#endif
+
+
+/* Define to one of `_getb67', `GETB67', `getb67' for Cray-2 and Cray-YMP
+   systems. This function is required for `alloca.c' support on those systems.
+   */
+#undef CRAY_STACKSEG_END
+
+/* Define to 1 if using `alloca.c'. */
+#undef C_ALLOCA
+
+/* Define to 1 if you have `alloca', as a function or macro. */
+#undef HAVE_ALLOCA
+
+/* Define to 1 if you have <alloca.h> and it should be used (not on Ultrix).
+   */
+#undef HAVE_ALLOCA_H
+
+/* Define to 1 if you have the `asprintf' function. */
+#undef HAVE_ASPRINTF
+
+/* Define to 1 if your GCC C compiler supports the 'weak' attribute. */
+#undef HAVE_ATTRIBUTE_weak
+
+/* Define to 1 if your GCC C compiler supports the 'weak_import' attribute. */
+#undef HAVE_ATTRIBUTE_weak_import
+
+/* Define to 1 if your GCC C compiler supports the 'weakref' attribute. */
+#undef HAVE_ATTRIBUTE_weakref
+
+/* Define to indicate the ${CURSES_DESCRIP} library */
+#undef HAVE_CURSES
+
+/* Define to 1 if you have the `getloadavg' function. */
+#undef HAVE_GETLOADAVG
+
+/* Define if your system has the GTK2 libraries. */
+#undef HAVE_GTK2
+
+/* Define to 1 if you have the <inttypes.h> header file. */
+#undef HAVE_INTTYPES_H
+
+/* Define to 1 if you have the <memory.h> header file. */
+#undef HAVE_MEMORY_H
+
+/* Define to indicate the ${NCURSES_DESCRIP} library */
+#undef HAVE_NCURSES
+
+/* Define to indicate the ${NEWT_DESCRIP} library */
+#undef HAVE_NEWT
+
+/* Define to 1 if you have the `setenv' function. */
+#undef HAVE_SETENV
+
+/* Define to 1 if you have the <stdint.h> header file. */
+#undef HAVE_STDINT_H
+
+/* Define to 1 if you have the <stdlib.h> header file. */
+#undef HAVE_STDLIB_H
+
+/* Define to 1 if you have the `strcasestr' function. */
+#undef HAVE_STRCASESTR
+
+/* Define to 1 if you have the <strings.h> header file. */
+#undef HAVE_STRINGS_H
+
+/* Define to 1 if you have the <string.h> header file. */
+#undef HAVE_STRING_H
+
+/* Define to 1 if you have the `strndup' function. */
+#undef HAVE_STRNDUP
+
+/* Define to 1 if you have the `strnlen' function. */
+#undef HAVE_STRNLEN
+
+/* Define to 1 if you have the `strsep' function. */
+#undef HAVE_STRSEP
+
+/* Define to 1 if you have the <sys/stat.h> header file. */
+#undef HAVE_SYS_STAT_H
+
+/* Define to 1 if you have the <sys/types.h> header file. */
+#undef HAVE_SYS_TYPES_H
+
+/* Define to 1 if you have the <unistd.h> header file. */
+#undef HAVE_UNISTD_H
+
+/* Define to 1 if you have the `unsetenv' function. */
+#undef HAVE_UNSETENV
+
+/* Define to 1 if you have the `vasprintf' function. */
+#undef HAVE_VASPRINTF
+
+/* Define to the address where bug reports for this package should be sent. */
+#undef PACKAGE_BUGREPORT
+
+/* Define to the full name of this package. */
+#undef PACKAGE_NAME
+
+/* Define to the full name and version of this package. */
+#undef PACKAGE_STRING
+
+/* Define to the one symbol short name of this package. */
+#undef PACKAGE_TARNAME
+
+/* Define to the version of this package. */
+#undef PACKAGE_VERSION
+
+/* If using the C implementation of alloca, define if you know the
+   direction of stack growth for your system; otherwise it will be
+   automatically deduced at runtime.
+	STACK_DIRECTION > 0 => grows toward higher addresses
+	STACK_DIRECTION < 0 => grows toward lower addresses
+	STACK_DIRECTION = 0 => direction of growth unknown */
+#undef STACK_DIRECTION
+
+/* Define to 1 if you have the ANSI C header files. */
+#undef STDC_HEADERS
+
+#endif
+

menuselect/bootstrap.sh

@@ -0,0 +1,41 @@
+#!/bin/sh
+
+check_for_app() {
+	$1 --version 2>&1 >/dev/null
+	if [ $? != 0 ]
+	then
+		echo "Please install $1 and run bootstrap.sh again!"
+		exit 1
+	fi
+}
+
+uname -s | grep -q FreeBSD
+if [ $? = 0 ]
+then
+	check_for_app autoconf259
+	check_for_app autoheader259
+	check_for_app automake19
+	check_for_app aclocal19
+	echo "Generating the configure script ..."
+	aclocal19 2>/dev/null
+	autoconf259
+	autoheader259
+	automake19 --add-missing --copy 2>/dev/null
+else
+	AUTOCONF_VERSION=2.59
+	AUTOMAKE_VERSION=1.9
+	export AUTOCONF_VERSION
+	export AUTOMAKE_VERSION
+
+	check_for_app autoconf
+	check_for_app autoheader
+	check_for_app automake
+	check_for_app aclocal
+	echo "Generating the configure script ..."
+	aclocal 2>/dev/null
+	autoconf
+	autoheader
+	automake --add-missing --copy 2>/dev/null
+fi
+
+exit 0

menuselect/configure.ac

@@ -0,0 +1,146 @@
+# Process this file with autoconf to produce a configure script.
+
+AC_PREREQ(2.59)
+
+m4_define([MENUSELECT_VERSION],
+          m4_bpatsubst(m4_esyscmd([./make_version .]),
+                       [\([0-9.]*\)\(\w\|\W\)*],
+                       [\1]))
+AC_INIT(menuselect, MENUSELECT_VERSION, www.asterisk.org)
+
+# check existence of the package
+AC_CONFIG_SRCDIR([menuselect.c])
+
+# specify output header file
+AC_CONFIG_HEADER(autoconfig.h)
+
+AC_COPYRIGHT("Menuselect")
+AC_REVISION($Revision: 40837 $)
+
+AC_CANONICAL_BUILD
+AC_CANONICAL_HOST
+
+HOST_OS=${host_os}
+AC_SUBST(HOST_OS)
+
+PBX_WINARCH=0
+case "${host_os}" in
+     freebsd*)
+     OSARCH=FreeBSD
+     ;;
+     netbsd*)
+     OSARCH=NetBSD
+     ;;
+     openbsd*)
+     OSARCH=OpenBSD
+     ;;
+     solaris*)
+     OSARCH=SunOS
+     ;;
+     mingw32)
+     OSARCH=mingw32
+     PBX_WINARCH=1
+     ;;
+     cygwin)
+     OSARCH=cygwin
+     PBX_WINARCH=1
+     ;;
+     linux-gnueabi)
+     OSARCH=linux-gnu
+     ;;
+     *)
+     OSARCH=${host_os}
+     ;;
+esac
+
+AH_TOP(
+#ifndef MENUSELECT_AUTOCONFIG_H
+#define MENUSELECT_AUTOCONFIG_H
+
+#ifndef _REENTRANT
+#define _REENTRANT
+#endif
+)
+
+AH_BOTTOM(
+#endif
+)
+
+# Checks for programs.
+AC_PROG_CC
+AST_CHECK_GNU_MAKE
+
+
+AC_LANG(C)
+AC_ARG_ENABLE([debug],
+	[AS_HELP_STRING([--enable-debug], [Turn on debug mode])],
+	[case "${enableval}" in
+		y|ye|yes) MENUSELECT_DEBUG=yes ;;
+		n|no)  MENUSELECT_DEBUG=no ;;
+		*) AC_MSG_ERROR(bad value ${enableval} for --enable-debug)  ;;
+    esac])
+AC_SUBST(MENUSELECT_DEBUG)
+
+# Support weak symbols on a platform specific basis.  The Mac OS X
+# (Darwin) support must be isolated from the other platforms because
+# it has caused other platforms to fail.
+#
+case "${OSARCH}" in
+	darwin*)
+	# Allow weak symbol support on Darwin platforms only because there
+	# is active community support for it.
+	# However, Darwin seems to break weak symbols for each new version.
+	#
+	AST_GCC_ATTRIBUTE(weak_import, [], [], PBX_WEAKREF)
+
+	# Several other platforms including Linux have GCC versions that
+	# define the weak attribute.  However, this attribute is only
+	# setup for use in the code by Darwin.
+	AST_GCC_ATTRIBUTE(weak, [], [], PBX_WEAKREF)
+	;;
+	linux-gnu)
+	# Primarily support weak symbols on Linux platforms.
+	#
+	AST_GCC_ATTRIBUTE(weakref, [weakref("foo")], static, PBX_WEAKREF)
+	;;
+	*)
+	# Allow weak symbols on other platforms.  However, any problems
+	# with this feature on other platforms must be fixed by the
+	# community.
+	#
+	AST_GCC_ATTRIBUTE(weakref, [weakref("foo")], static, PBX_WEAKREF)
+	;;
+esac
+
+AC_FUNC_ALLOCA
+AC_CHECK_FUNCS([asprintf getloadavg setenv strcasestr strndup strnlen strsep unsetenv vasprintf])
+
+# The frontend can use curses, ncurses, newt or GTK2 so check for all of them
+
+AST_EXT_LIB_SETUP([NEWT], [newt], [newt])
+AST_EXT_LIB_SETUP([CURSES], [curses], [curses])
+AST_EXT_LIB_SETUP([NCURSES], [ncurses], [ncurses])
+
+AST_EXT_LIB_CHECK([NEWT], [newt], [newtBell], [newt.h])
+AST_EXT_LIB_CHECK([CURSES], [curses], [initscr], [curses.h])
+AST_EXT_LIB_CHECK([NCURSES], [ncurses], [initscr], [curses.h])
+
+PBX_GTK2=0
+AC_CHECK_TOOL(PKGCONFIG, pkg-config, No)
+if test ! "x${PKGCONFIG}" = xNo; then
+   GTK2_INCLUDE=$(${PKGCONFIG} gtk+-2.0 --cflags 2>/dev/null)
+   GTK2_LIB=$(${PKGCONFIG} gtk+-2.0 --libs)   
+   PBX_GTK2=1
+   AC_DEFINE([HAVE_GTK2], 1, [Define if your system has the GTK2 libraries.])
+fi
+AC_SUBST(PBX_GTK2)
+AC_SUBST(GTK2_INCLUDE)
+AC_SUBST(GTK2_LIB)
+
+test "$silent"=yes && ac_sub_configure_args="${ac_sub_configure_args} --silent"
+
+AC_CONFIG_FILES([makeopts])
+AC_CONFIG_SUBDIRS([mxml])
+AC_OUTPUT
+
+AC_MSG_NOTICE(Menuselect build configuration successfully completed)

menuselect/contrib/Makefile-dummy

@@ -0,0 +1,17 @@
+all:
+
+clean:
+
+dist-clean:
+
+makeopts:
+
+menuselect:
+	./menuselect-dummy
+
+# Generate some dummy files to satifsy dependencies from the main
+# Makefile.
+dummies:
+	touch linkedlists.h menuselect.c menuselect_curses.c \
+		menuselect.h menuselect_stub.c
+

menuselect/contrib/menuselect-dummy

@@ -0,0 +1,741 @@
+#!/usr/bin/perl -w
+
+# menuselect - a simple drop-in replacement of the batch-mode menuselect
+# included with Asterisk.
+#
+# Copyright (C) 2008 by Tzafrir Cohen <tzafrir.cohen@xorcom.com>
+#
+# This program is free software; you can redistribute it and/or modify
+# it under the terms of the GNU General Public License as published by
+# the Free Software Foundation; either version 2 of the License, or
+# (at your option) any later version.
+#
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307
+# USA
+
+# Installation: copy this script to menuselect/menuselect . Copy the
+# included Makefile as menuselect/Makefile and run:
+#
+#   make -C makefile dummies
+#
+# It takes configuration from build_tools/conf . Sample config file:
+#
+#   By default all modules will be built (except those marked not be
+#   used by default)
+#
+#   # exclude: Don't try to build the following modules. 
+#   #exclude app_test
+#
+#   # You can have multiple items in each line, and multiple lines.
+#   # Each item is a perl regular expression that must match the whole
+#   # module name.
+#   #exclude res_config_.*
+#
+#   # include: syntax is the same as exclude. Overrides exclude and
+#   # modules that are marked as disabled by defualt:
+#   #include res_config_sqlite3 app_skel
+#
+#   # If you want to make sure some modules will be conifgured to build,
+#   # you can require them. If modules that match any of the 'require'
+#   # pattern are not configured to build, menuselect will panic.
+#   # Same pattern rules apply here. Why would you want that? I have no
+#   # idea.
+#   #require chan_h323 app_directory
+#
+#   # random - the value for this keyword is a number between 1 and 
+#   # 100. The higher it is, more chances not to include each module.
+#   # Writes the list of modules that got hit to
+#   # build_tools/mods_removed_random .
+#   # Note that unlike 'make randomconfig' and such the random
+#   # configuration changes each time you run 'make', thus if a build
+#   # failed you should first read build_tools/mods_removed_random
+#   # before re-running make.
+#   #random 10
+#
+#   # Anything after a '#' is ignored, and likewise empty lines.
+#   # Naturally.
+
+use strict;
+use Getopt::Long;
+
+# Holds global dependncy information. Keys are module names.
+my %ModInfo = ();
+
+# extract configuration from kernel modules:
+my $AutoconfDepsFile = "build_tools/menuselect-deps";
+
+my $AutoconfOptsFile = "makeopts";
+my %ConfigureOpts = (); # 
+
+# configuration file to read for some directives:
+my $ConfFile = "build_tools/conf";
+
+my $DumpFile = 'build_tools/dump_deps';
+
+# Modules removed randomely:
+my $RandomeModsFile = "build_tools/mods_removed_random";
+
+my $MakedepsFile = "menuselect.makedeps";
+
+my $MakeoptsFile = "menuselect.makeopts";
+
+# If those modules are not present, the build will fail (PCRE patterns)
+my @RequiredModules = ();
+
+my @Subdirs = qw/addons apps bridges cdr cel channels codecs formats funcs main pbx res tests utils/;
+
+my @XmlCategories = 'cflags';
+
+# Modules should not bother building (PCRE patterns)
+my @ExcludedModules = ();
+
+# Do try building those. Overrides 'exclude' and 'defaultenable: no'
+my @IncludedModules = ();
+
+# A chance to rule-out a module randomely.
+my $RandomKnockoutFactor = 0;
+
+sub warning($) {
+	my $msg = shift;
+	print STDERR "$0: Warning: $msg\n";
+}
+
+# Convert XML syntax to mail-header-like syntax:
+# <var>value</var> --> Var: value
+sub extract_xml_key($) {
+	my %attr = ();
+	my $xml_line = shift;
+	if ($xml_line !~ m{^\s*<([a-z_A-Z0-9]+)(\s+([^>]*))?>([^<]*)</\1>}) {
+		warning "parsed empty value from XML line $xml_line";
+		return ('', ''); # warn?
+	}
+	my ($var, $val) = ($1, $4);
+	$var =~ s{^[a-z]}{\u$&};
+	if (defined $3) {
+		my $attr_text = $3;
+		while ($attr_text =~ /^( *([^=]+)="([^"]+)")/) {
+			my ($var, $val) = ($2, $3);
+			$attr_text =~ s/^$1//;
+			$attr{$var} = $val;
+		}
+	}
+	return ($var, $val, %attr);
+}
+
+# Get information embedded in source files from a subdirectory.
+# First parameter is the subdirectory and further ones are the actual
+# source files.
+sub get_subdir_module_info {
+	my $subdir = shift;
+	my @files = @_;
+
+	my $dir = uc($subdir);
+
+	foreach my $src (@files) {
+		open SRC,$src or die "Can't read from source file $src: $!\n";
+		$src =~ m|.*/([^/]*)\.c|;
+		my $mod_name = $1;
+		my %data = (
+			Type=>'module', 
+			Module=>$mod_name, 
+			Dir=> $dir, 
+			Avail=>1
+		);
+
+		while (<SRC>) {
+			next unless (m|^/\*\*\* MODULEINFO| .. m|^ *[*]+/|);
+			next unless (m|^[A-Z]| || m|^\s*<|);
+
+			# At this point we can assume we're in the module 
+			# info section.
+			chomp;
+			my ($var, $val, %attr) = extract_xml_key($_);
+			foreach (keys %attr) {
+				push @{$data{$_}},($attr{$_});
+			}
+			if ($var =~ /^(Depend|Use)$/i) {
+				# use uppercase for dependency names;
+				$val = uc($val); 
+			}
+			if ( ! exists $data{$var} ) {
+				$data{$var} = [$val];
+			} else {
+				push @{$data{$var}},($val);
+			}
+		}
+		close SRC;
+
+		$ModInfo{uc($mod_name)} = \%data;
+	}
+}
+
+# extract embedded information in all the source tree.
+sub extract_subdirs {
+	for my $subdir(@_) {
+		get_subdir_module_info($subdir, <$subdir/*.c> , <$subdir/*.cc>);
+	}
+}
+
+# parse a partial XML document that is included as an input 
+# for menuselect in a few places. Naturally a full-fledged XML parsing
+# will not be done here. A line-based parsing that happens to work will
+# have to do.
+sub parse_menuselect_xml_file($) {
+	my $file_name = shift;
+	open XML,$file_name or 
+		die "Failed opening XML file $file_name: $!.\n";
+	
+	my $header = <XML>;
+	$header =~ /^\s*<category\s+name="MENUSELECT_([^"]+)"\s/;
+	my $category = $1;
+	my $member;
+
+	while(<XML>){
+		next unless (m{^\s*<(/?[a-z]+)[>\s]});
+		my $tag = $1;
+
+		if ($tag eq 'member') {
+			if (! m{^\s*<member\s+name="([^"]+)" displayname="([^"]+)"\s*>}){
+				warning "Bad XML member line: $_ ($file_name:$.)\n";
+				next;
+			}
+			my ($name, $display_name) = ($1, $2);
+
+			$member = {
+				Type => 'XML',
+				Dir => $category,
+				Module => $1,
+				DisplayName => $2,
+				Defaultenabled => ['no'],
+				Avail => 1, 
+
+			};
+		} elsif ($tag eq '/member') {
+			$ModInfo{$member->{Module}} = $member;
+		} elsif ($tag eq '/category') {
+			last;
+		} else {
+			if (! m/^\s*<([a-z]+)>([^<]+)</) {
+				warning "(1) Unknown XML line $_ ($file_name:$.)\n";
+				next
+			}
+			my ($key, $val) = extract_xml_key($_);
+			if ($key eq '') {
+				warning "Unknown XML line $_ ($file_name:$.)\n";
+				next
+			}
+			if (! exists $member->{$key}) {
+				$member->{$key} = [];
+			}
+			
+			# Make sure dependencies are upper-case.
+			# FIXME: this is not the proper place for such a fix
+			$val = uc($val) if ($key =~ /Depend|Use/);
+
+			# Using "unshift' rather than 'push'.
+			# For a singleton value this makes the action an 
+			# override, as only the first value counts.
+			# For a list value, however, it means a reversed
+			# order.
+			unshift @{$member->{$key}}, ($val);
+		}
+	}
+
+	
+	close XML;
+}
+
+# Dump our data structure to a file.
+sub dump_deps($) {
+	my $file = shift;
+	open OUTPUT,">$file" or 
+	die "cannot open category file $file for writing: $!\n";
+
+	foreach my $mod_name (sort keys %ModInfo) { 
+	print OUTPUT "Key: $mod_name\n";
+		my $data = $ModInfo{$mod_name};
+		foreach my $var (sort keys %{$data} ) {
+			my $val = $$data{$var};
+			if (ref($val) eq 'ARRAY') {
+				print OUTPUT $var.": ". (join ", ", @$val)."\n";
+			} else {
+				print OUTPUT "$var: $val\n";
+			}
+		}
+		print OUTPUT "\n";
+	}
+	close OUTPUT;
+}
+
+# Get the available libraries that autoconf generated.
+sub get_autoconf_deps() {
+	open DEPS, $AutoconfDepsFile or
+		die "Failed to open $AutoconfDepsFile. Aborting: $!\n";
+
+	my @deps_list = (<DEPS>);
+	foreach (@deps_list){
+		chomp;
+		my ($lib, $avail_val) = split(/=/);
+		my ($avail, $avail_old) = split(/:/, $avail_val);
+		my $disabled = 0;
+		if ($avail == -1) { 
+			$disabled = 1;
+			$avail = 0;
+		}
+		$ModInfo{$lib} = {
+			Type=>'lib', Avail=>$avail, Disabled => $disabled
+		};
+		if (defined $avail_old) {
+			$ModInfo{$lib}{AvailOld} = $avail_old;
+		}
+		# FIXME: 
+		if (($avail ne "0") && ($avail ne "1")) {
+			warning "Library $lib has invalid availability ".
+				"value <$avail> (check $AutoconfDepsFile).\n";
+		}
+	}
+	close DEPS;
+}
+
+# Get the available libraries that autoconf generated.
+sub get_autoconf_opts() {
+	open OPTS, $AutoconfOptsFile or
+		die "Failed to open $AutoconfOptsFile. Aborting: $!\n";
+
+	while (<OPTS>) {
+		chomp;
+		next if /^(#|$)/;
+		my ($var, $val) = split /\s*=\s*/, $_, 2;
+		$ConfigureOpts{$var} = $val;
+	}
+	close OPTS;
+	if (not exists $ConfigureOpts{AST_DEVMODE}) {
+		$ConfigureOpts{AST_DEVMODE} = 'no';
+	}
+}
+
+# Read our specific config file.
+#
+# Its format:
+#
+#   keyword  values
+#
+# values are always a spaces-separated list.
+sub read_conf() {
+	open CONF,$ConfFile or return;
+
+	while (<CONF>) {
+		# remove comments and empty lines:
+		chomp;
+		s/#.*$//;
+		next if /^\s*$/;
+
+		my ($keyword, @value) = split;
+
+		if ($keyword eq 'exclude') {
+			push @ExcludedModules, @value;
+		} elsif ($keyword eq 'include') {
+			push @IncludedModules, @value;
+		} elsif ($keyword eq 'require') {
+			push @RequiredModules, @value;
+		} elsif ($keyword eq 'random') {
+			$RandomKnockoutFactor = $value[0] / 100;
+		} else {
+			warning "unknown keyword $keyword in line $. of $ConfFile.";
+		}
+	}
+}
+
+# generate menuselect.makedeps.
+# In this file menuselect writes dependecies of each module. CFLAGS will
+# then automatically include for each module the _INCLUDE and LDFLAGS
+# will include the _LIBS from all the depedencies of the module.
+sub gen_makedeps() {
+	open MAKEDEPSS, ">$MakedepsFile" or
+		die "Failed to open deps file $MakedepsFile for writing. Aborting: $!\n";
+
+	for my $mod_name (sort keys %ModInfo) {
+		next unless ($ModInfo{$mod_name}{Type} eq 'module');
+
+		my $mod = $ModInfo{$mod_name};
+		my @deps = ();
+
+		# if we have Depend or Use, put their values into 
+		# @deps . If we have none, move on.
+		push @deps, @{$mod->{Depend}} if (exists $mod->{Depend});
+		push @deps, @{$mod->{Use}}    if (exists $mod->{Use});
+		next unless @deps; 
+
+		# TODO: don't print dependencies that are not external libs. 
+		# Not done yet until I figure out if this is safe.
+		my $dep = join(' ', @deps);
+		print MAKEDEPSS "MENUSELECT_DEPENDS_".$mod->{Module}."=$dep\n";
+	}
+
+	close MAKEDEPSS;
+}
+
+# Set modules from patterns specified by 'exclude' in the configuration file
+# to exclude modules from building (mark them as unavailable).
+sub apply_excluded_patterns() {
+	foreach my $pattern (@ExcludedModules) {
+		my @excluded = grep {/^$pattern$/i} (keys %ModInfo);
+		foreach (@excluded) {
+			$ModInfo{$_}{Avail} = 0;
+		}
+	}
+}
+
+# Set modules from patterns specified by 'include' in the configuration
+# file to exclude from building (mark them as available).
+sub apply_included_patterns() {
+	foreach my $pattern (@IncludedModules) {
+		my @included = grep {/^$pattern$/i} (keys %ModInfo);
+		foreach (@included) {
+			$ModInfo{$_}{Avail} = 1;
+		}
+	}
+}
+
+# If user set the "random" config to anything > 0, drop some random
+# modules. May help expose wrong dependencies.
+sub apply_random_drop() {
+	return if ($RandomKnockoutFactor <= 0);
+
+	open MODS_LIST, ">$RandomeModsFile" or
+		die "Failed to open modules list file $RandomeModsFile for writing. Aborting: $!\n";
+	for my $mod (keys %ModInfo) {
+		next unless ($ModInfo{$mod}{Type} eq 'module');
+		next unless (rand() < $RandomKnockoutFactor);
+		$ModInfo{$mod}{Avail} = 0;
+		$ModInfo{$mod}{RandomKill} = 1;
+		print MODS_LIST $ModInfo{$mod}{Module}."\n";
+	}
+
+	close MODS_LIST;
+	
+
+}
+
+sub check_required_patterns() {
+	my @failed = ();
+	foreach my $pattern (@RequiredModules) {
+		my @required = grep {/^$pattern$/i} (keys %ModInfo);
+		foreach my $mod (@required) {
+			if ((! exists $ModInfo{$mod}{Checked}) ||
+				(! $ModInfo{$mod}{Checked}) )
+			{
+				push @failed, $mod;
+			}
+		}
+	}
+	return unless (@failed);
+
+	my $failed_str = join ' ',@failed;
+	die("Missing dependencies for the following modules: $failed_str\n");
+}
+
+# Disable building for modules that were marked in the embedded module 
+# information as disabled for building by default.
+sub apply_default_enabled() {
+	foreach my $mod (keys %ModInfo) {
+		if ((exists $ModInfo{$mod}{Defaultenabled}) &&
+				$ModInfo{$mod}{Defaultenabled}[0] eq 'no')
+		{
+			$ModInfo{$mod}{Avail} = 0;
+		}
+	}
+}
+
+# We found a dependency we don't know about. Warn the user, and add
+# information about it:
+sub handle_unknown_dep($$) {
+	my ($dep_mod, $mod) = @_;
+
+	my $mod_info = {
+		Type => 'Unknown',
+		Avail => 0,
+		Checked => 0,
+	};
+	$ModInfo{$dep_mod} = $mod_info;
+
+	warning "Unknown dependency module $dep_mod (for e.g. $mod)\n";
+}
+
+# recursively check dependency for a module.
+#
+# We run a scan for modules. Modules marked as 'Checked' are ones we
+# have already fully verified to have proper dependencies.
+#
+# We can only use a module or library marked as Avail => 1 (library
+# available or module not excluded).
+sub check_module($);
+sub check_module($) {
+	my $mod = shift;
+
+	# we checked it:
+	if (exists $ModInfo{$mod}{Checked}) {
+		return $ModInfo{$mod}{Checked};
+	}
+	# A library has no dependencies of its own.
+	if ($ModInfo{$mod}{Type} eq 'lib') {
+		return ($ModInfo{$mod}{Avail} || 0);
+	}
+	# An excluded module.
+	if ($ModInfo{$mod}{Avail} == 0) {
+		return 0;
+	}
+	if (! exists $ModInfo{$mod}{Depend}) {
+		$ModInfo{$mod}{Checked} = 1;
+		return 1;
+	}
+
+	my $deps_checked = 1; # may be reset below on failures:
+
+	if (exists $ModInfo{$mod}{Tested}) {
+		# this probably means a circular dependency of some sort.
+		warning "Got to module $mod that is already tested.";
+	}
+	$ModInfo{$mod}{Tested} = 1;
+
+	foreach my $dep_mod (@{$ModInfo{$mod}{Depend}} ) {
+		if (!exists ${ModInfo}{$dep_mod}) {
+			handle_unknown_dep($dep_mod, $mod);
+			return 0;
+		}
+		$deps_checked &= check_module($dep_mod);
+		last if(!$deps_checked) # no point testing further if we failed.
+	}
+
+	$ModInfo{$mod}{Checked} = $deps_checked;
+	return $deps_checked;
+}
+
+# The main dependency resolver function.
+sub resolve_deps() {
+	apply_default_enabled();
+	apply_excluded_patterns();
+	apply_included_patterns();
+
+	foreach my $mod (keys %ModInfo) {
+		check_module($mod);
+	}
+}
+
+# generate menuselect.makeopts. 
+# The values in this file obey to different semantics:
+# 1. For modules, a module will be built unles listed here
+# 2. For XML values (sounds, CFLAGS) it will be enabled if listed here
+sub gen_makeopts() {
+	open MAKEDEPS, ">$MakeoptsFile" or
+		die "Failed to open opts file $MakeoptsFile for writing. Aborting: $!\n";
+
+	my %Subdirs;
+	foreach my $mod (sort keys %ModInfo) {
+		next unless ($ModInfo{$mod}{Type} =~ /^(module|XML)$/);
+		if ($ModInfo{$mod}{Type} eq 'XML') {
+			next unless ($ModInfo{$mod}{Checked});
+		} else {
+			next if ($ModInfo{$mod}{Checked});
+		}
+		my $dir = $ModInfo{$mod}{Dir};
+		if (! exists $Subdirs{$dir}) {
+			$Subdirs{$dir} = [];
+		}
+		push @{$Subdirs{$dir}},( $ModInfo{$mod}{Module} );
+	}
+	foreach my $dir (sort keys %Subdirs) {
+		my $deps = join(' ', @{$Subdirs{$dir}});
+		print MAKEDEPS "MENUSELECT_$dir=$deps\n";
+	}
+
+	close MAKEDEPS;
+}
+
+# Main function for --check-deps
+sub check_dependencies() {
+	read_conf();
+
+	extract_subdirs(@Subdirs);
+
+	get_autoconf_opts();
+
+	parse_menuselect_xml_file('build_tools/cflags.xml');
+	if ($ConfigureOpts{AST_DEVMODE} eq 'yes') {
+		parse_menuselect_xml_file('build_tools/cflags-devmode.xml');
+	} 
+	parse_menuselect_xml_file('sounds/sounds.xml');
+
+	apply_random_drop();
+
+	get_autoconf_deps();
+
+	#dump_deps('build_tools/dump_deps_before_resolve');
+	resolve_deps();
+
+	# Handy debugging:
+	dump_deps($DumpFile);
+
+	check_required_patterns();
+
+	gen_makedeps();
+
+	gen_makeopts();
+}
+
+# 
+# The main program start here
+#
+
+sub read_dump() {
+	my %items = ();
+	my $saved_rs = $/;
+	$/ = "\n\n";
+	open DUMP_FILE,$DumpFile or die "Can't read from dump file $DumpFile\n";
+	while (<DUMP_FILE>) {
+		my %item = ();
+		my @item_lines = split /\n\r?/;
+		foreach (@item_lines) {
+			my ($var, $value) = split /: /, $_, 2;
+			$item{$var} = $value;
+		}
+		# FIXME: dependencies are a list. This should not be a 
+		# special case.
+		if (exists $item{Depend}) {
+			$item{Depend} = [split /\s*,\s*/,$item{Depend}];
+		}
+		$items{$item{Key}} = \%item;
+	}
+	close DUMP_FILE;
+	$/ = $saved_rs;
+	return \%items;
+}
+
+# Explain why a module (read from the dump file) was not enabled.
+# (We assume here that $item->{Avail} is 0)
+sub fail_reason($) {
+	my $item = shift;
+	if ($item->{Type} eq 'lib') {
+		return " Not found: system library";
+	} elsif ($item->{Type} eq 'XML') {
+		if ($item->{Defaultenabled} !~ /^y/) {
+			return "Not enabled";
+		} else {
+			return "Missing dependencies";
+		}
+	} elsif ($item->{Type} eq 'module') {
+		if (exists ($item->{Defaultenabled}) && 
+			$item->{Defaultenabled} =~ /^n/) {
+			return "Disabled";
+		} else {
+			return "Missing dependencies";
+		}
+	}
+}
+
+sub item_used($) {
+	my $item = shift;
+	my $type = $item->{Type};
+
+	return $item->{Avail} if ($type eq 'lib');
+	return $item->{Checked};
+}
+
+sub print_module_status {
+	my $flag_verbose = shift;
+	my $items = read_dump();
+	my %items_matched = ();
+
+	foreach my $pattern (@_) {
+		foreach (keys %$items) {
+			if (/$pattern/i) {
+				$items_matched{$_} = 1;
+			}
+		}
+	}
+
+	my @items_list = sort keys %items_matched;
+
+	foreach my $item_name (@items_list) {
+		my $item = $items->{$item_name};
+		if ($flag_verbose) {
+			printf "%s %-8s %-30s\n",
+				(item_used($item)? 'Y':'n'),
+				$item->{Type},
+				$item->{Key};
+			if (!$item->{Avail}) {
+				my $reason = fail_reason($item);
+				print " $reason\n";
+			}
+			foreach (@{$item->{Depend}}) {
+				my $depmod = $items->{$_};
+					printf(" * %-12s ",$_);
+					print (item_used($depmod)? '': "un");
+					print "available\n";
+			}
+		} else {
+			printf "%s %-8s %-30s",
+				(item_used($item)? 'Y':'n'),
+				$item->{Type},
+				$item->{Key};
+			foreach (@{$item->{Depend}}) {
+				my $depmod = $items->{$_};
+				if (item_used($depmod)) {
+					print "$_ ";
+				} else {
+					printf "[%s] ", $_;
+				}
+			}
+			print "\n";
+		}
+	}
+}
+
+sub usage() {
+	print "$0: menuselect reimplementation\n";
+	print "\n";
+	print "Usage:\n";
+	print "$0  # menuselect processing\n";
+	print "$0 -m|--modinfo|--moduls-info PATTERN # Status of modules\n";
+	print "$0 -v|--verbose                       # verbose (modinfo)\n";
+	print "$0 -c|--check-deps                    # Check for dependencies\n";
+	print "\n";
+	print "PATTERN is a partial perl regex. Use '-m .' to list all.\n";
+}
+
+my @module_status = ();
+
+my $flag_verbose = 0;
+
+my $action = '';
+
+my $rc = GetOptions(
+	'modinfo|modules-info|m=s' => \@module_status,
+	'verbose|v' => \$flag_verbose,
+	'check-deps|c:s' => sub { $action = 'check_dependencies'},
+	'help|h' => sub { usage(); exit 0 },
+);
+if (!$rc) {
+	usage();
+	exit $rc;
+}
+
+if (@module_status) {
+	$action = 'module_status';
+}
+
+if ($action eq 'module_status') {
+	print_module_status($flag_verbose, @module_status);
+	exit 0;
+} elsif ( $action eq 'check_dependencies') {
+	check_dependencies();
+} else {
+	usage(); exit(1);
+}

menuselect/example_menuselect-tree

@@ -0,0 +1,487 @@
+<?xml version=1.0?>
+
+<menu name="Asterisk Module Selection">
+	<category name="MENUSELECT_APPS" displayname="Applications">
+		<member name="app_adsiprog" displayname="Asterisk ADSI Programming Application" remove_on_change="apps/app_adsiprog.o apps/app_adsiprog.so">
+		</member>
+		<member name="app_alarmreceiver" displayname="Alarm Receiver for Asterisk" remove_on_change="apps/app_alarmreceiver.o apps/app_alarmreceiver.so">
+		</member>
+		<member name="app_amd" displayname="Answering Machine Detection Application" remove_on_change="apps/app_amd.o apps/app_amd.so">
+		</member>
+		<member name="app_authenticate" displayname="Authentication Application" remove_on_change="apps/app_authenticate.o apps/app_authenticate.so">
+		</member>
+		<member name="app_cdr" displayname="Tell Asterisk to not maintain a CDR for the current call" remove_on_change="apps/app_cdr.o apps/app_cdr.so">
+		</member>
+		<member name="app_chanisavail" displayname="Check channel availability" remove_on_change="apps/app_chanisavail.o apps/app_chanisavail.so">
+		</member>
+		<member name="app_channelredirect" displayname="Channel Redirect" remove_on_change="apps/app_channelredirect.o apps/app_channelredirect.so">
+		</member>
+		<member name="app_chanspy" displayname="Listen to the audio of an active channel" remove_on_change="apps/app_chanspy.o apps/app_chanspy.so">
+		</member>
+		<member name="app_controlplayback" displayname="Control Playback Application" remove_on_change="apps/app_controlplayback.o apps/app_controlplayback.so">
+		</member>
+		<member name="app_db" displayname="Database Access Functions" remove_on_change="apps/app_db.o apps/app_db.so">
+		</member>
+		<member name="app_dial" displayname="Dialing Application" remove_on_change="apps/app_dial.o apps/app_dial.so">
+		</member>
+		<member name="app_dictate" displayname="Virtual Dictation Machine" remove_on_change="apps/app_dictate.o apps/app_dictate.so">
+		</member>
+		<member name="app_directed_pickup" displayname="Directed Call Pickup Application" remove_on_change="apps/app_directed_pickup.o apps/app_directed_pickup.so">
+		</member>
+		<member name="app_directory" displayname="Extension Directory" remove_on_change="apps/app_directory.o apps/app_directory.so">
+		</member>
+		<member name="app_disa" displayname="DISA (Direct Inward System Access) Application" remove_on_change="apps/app_disa.o apps/app_disa.so">
+		</member>
+		<member name="app_dumpchan" displayname="Dump Info About The Calling Channel" remove_on_change="apps/app_dumpchan.o apps/app_dumpchan.so">
+		</member>
+		<member name="app_echo" displayname="Simple Echo Application" remove_on_change="apps/app_echo.o apps/app_echo.so">
+		</member>
+		<member name="app_exec" displayname="Executes dialplan applications" remove_on_change="apps/app_exec.o apps/app_exec.so">
+		</member>
+		<member name="app_externalivr" displayname="External IVR Interface Application" remove_on_change="apps/app_externalivr.o apps/app_externalivr.so">
+		</member>
+		<member name="app_festival" displayname="Simple Festival Interface" remove_on_change="apps/app_festival.o apps/app_festival.so">
+		</member>
+		<member name="app_flash" displayname="Flash zap trunk application" remove_on_change="apps/app_flash.o apps/app_flash.so">
+	<depend>zaptel</depend>
+		</member>
+		<member name="app_followme" displayname="Find-Me/Follow-Me Application" remove_on_change="apps/app_followme.o apps/app_followme.so">
+		</member>
+		<member name="app_forkcdr" displayname="Fork The CDR into 2 separate entities." remove_on_change="apps/app_forkcdr.o apps/app_forkcdr.so">
+		</member>
+		<member name="app_getcpeid" displayname="Get ADSI CPE ID" remove_on_change="apps/app_getcpeid.o apps/app_getcpeid.so">
+		</member>
+		<member name="app_hasnewvoicemail" displayname="Indicator for whether a voice mailbox has messages in a given folder." remove_on_change="apps/app_hasnewvoicemail.o apps/app_hasnewvoicemail.so">
+		</member>
+		<member name="app_ices" displayname="Encode and Stream via icecast and ices" remove_on_change="apps/app_ices.o apps/app_ices.so">
+		</member>
+		<member name="app_image" displayname="Image Transmission Application" remove_on_change="apps/app_image.o apps/app_image.so">
+		</member>
+		<member name="app_ivrdemo" displayname="IVR Demo Application" remove_on_change="apps/app_ivrdemo.o apps/app_ivrdemo.so">
+	<defaultenabled>no</defaultenabled>
+		</member>
+		<member name="app_lookupblacklist" displayname="Look up Caller*ID name/number from blacklist database" remove_on_change="apps/app_lookupblacklist.o apps/app_lookupblacklist.so">
+		</member>
+		<member name="app_lookupcidname" displayname="Look up CallerID Name from local database" remove_on_change="apps/app_lookupcidname.o apps/app_lookupcidname.so">
+		</member>
+		<member name="app_macro" displayname="Extension Macros" remove_on_change="apps/app_macro.o apps/app_macro.so">
+		</member>
+		<member name="app_meetme" displayname="MeetMe conference bridge" remove_on_change="apps/app_meetme.o apps/app_meetme.so">
+	<depend>zaptel</depend>
+		</member>
+		<member name="app_milliwatt" displayname="Digital Milliwatt (mu-law) Test Application" remove_on_change="apps/app_milliwatt.o apps/app_milliwatt.so">
+		</member>
+		<member name="app_mixmonitor" displayname="Mixed Audio Monitoring Application" remove_on_change="apps/app_mixmonitor.o apps/app_mixmonitor.so">
+		</member>
+		<member name="app_morsecode" displayname="Morse code" remove_on_change="apps/app_morsecode.o apps/app_morsecode.so">
+		</member>
+		<member name="app_mp3" displayname="Silly MP3 Application" remove_on_change="apps/app_mp3.o apps/app_mp3.so">
+		</member>
+		<member name="app_nbscat" displayname="Silly NBS Stream Application" remove_on_change="apps/app_nbscat.o apps/app_nbscat.so">
+		</member>
+		<member name="app_osplookup" displayname="Open Settlement Protocol Applications" remove_on_change="apps/app_osplookup.o apps/app_osplookup.so">
+	<depend>libosptk</depend>
+	<depend>ssl</depend>
+		</member>
+		<member name="app_page" displayname="Page Multiple Phones" remove_on_change="apps/app_page.o apps/app_page.so">
+	<depend>zaptel</depend>
+		</member>
+		<member name="app_parkandannounce" displayname="Call Parking and Announce Application" remove_on_change="apps/app_parkandannounce.o apps/app_parkandannounce.so">
+		</member>
+		<member name="app_playback" displayname="Sound File Playback Application" remove_on_change="apps/app_playback.o apps/app_playback.so">
+		</member>
+		<member name="app_privacy" displayname="Require phone number to be entered, if no CallerID sent" remove_on_change="apps/app_privacy.o apps/app_privacy.so">
+		</member>
+		<member name="app_queue" displayname="True Call Queueing" remove_on_change="apps/app_queue.o apps/app_queue.so">
+		</member>
+		<member name="app_random" displayname="Random goto" remove_on_change="apps/app_random.o apps/app_random.so">
+		</member>
+		<member name="app_read" displayname="Read Variable Application" remove_on_change="apps/app_read.o apps/app_read.so">
+		</member>
+		<member name="app_readfile" displayname="Stores output of file into a variable" remove_on_change="apps/app_readfile.o apps/app_readfile.so">
+		</member>
+		<member name="app_realtime" displayname="Realtime Data Lookup/Rewrite" remove_on_change="apps/app_realtime.o apps/app_realtime.so">
+		</member>
+		<member name="app_record" displayname="Trivial Record Application" remove_on_change="apps/app_record.o apps/app_record.so">
+		</member>
+		<member name="app_rpt" displayname="Radio Repeater / Remote Base  version 0.48  06/13/2006" remove_on_change="apps/app_rpt.o apps/app_rpt.so">
+	<depend>zaptel</depend>
+	<defaultenabled>no</defaultenabled>
+		</member>
+		<member name="app_sayunixtime" displayname="Say time" remove_on_change="apps/app_sayunixtime.o apps/app_sayunixtime.so">
+		</member>
+		<member name="app_senddtmf" displayname="Send DTMF digits Application" remove_on_change="apps/app_senddtmf.o apps/app_senddtmf.so">
+		</member>
+		<member name="app_sendtext" displayname="Send Text Applications" remove_on_change="apps/app_sendtext.o apps/app_sendtext.so">
+		</member>
+		<member name="app_setcallerid" displayname="Set CallerID Application" remove_on_change="apps/app_setcallerid.o apps/app_setcallerid.so">
+		</member>
+		<member name="app_setcdruserfield" displayname="CDR user field apps" remove_on_change="apps/app_setcdruserfield.o apps/app_setcdruserfield.so">
+		</member>
+		<member name="app_settransfercapability" displayname="Set ISDN Transfer Capability" remove_on_change="apps/app_settransfercapability.o apps/app_settransfercapability.so">
+		</member>
+		<member name="app_skel" displayname="Trivial skeleton Application" remove_on_change="apps/app_skel.o apps/app_skel.so">
+	<defaultenabled>no</defaultenabled>
+		</member>
+		<member name="app_sms" displayname="SMS/PSTN handler" remove_on_change="apps/app_sms.o apps/app_sms.so">
+		</member>
+		<member name="app_softhangup" displayname="Hangs up the requested channel" remove_on_change="apps/app_softhangup.o apps/app_softhangup.so">
+		</member>
+		<member name="app_speech_utils" displayname="Dialplan Speech Applications" remove_on_change="apps/app_speech_utils.o apps/app_speech_utils.so">
+		</member>
+		<member name="app_stack" displayname="Stack Routines" remove_on_change="apps/app_stack.o apps/app_stack.so">
+		</member>
+		<member name="app_system" displayname="Generic System() application" remove_on_change="apps/app_system.o apps/app_system.so">
+		</member>
+		<member name="app_talkdetect" displayname="Playback with Talk Detection" remove_on_change="apps/app_talkdetect.o apps/app_talkdetect.so">
+		</member>
+		<member name="app_test" displayname="Interface Test Application" remove_on_change="apps/app_test.o apps/app_test.so">
+		</member>
+		<member name="app_transfer" displayname="Transfer" remove_on_change="apps/app_transfer.o apps/app_transfer.so">
+		</member>
+		<member name="app_url" displayname="Send URL Applications" remove_on_change="apps/app_url.o apps/app_url.so">
+		</member>
+		<member name="app_userevent" displayname="Custom User Event Application" remove_on_change="apps/app_userevent.o apps/app_userevent.so">
+		</member>
+		<member name="app_verbose" displayname="Send verbose output" remove_on_change="apps/app_verbose.o apps/app_verbose.so">
+		</member>
+		<member name="app_voicemail" displayname="Comedian Mail (Voicemail System)" remove_on_change="apps/app_voicemail.o apps/app_voicemail.so">
+		</member>
+		<member name="app_waitforring" displayname="Waits until first ring after time" remove_on_change="apps/app_waitforring.o apps/app_waitforring.so">
+		</member>
+		<member name="app_waitforsilence" displayname="Wait For Silence" remove_on_change="apps/app_waitforsilence.o apps/app_waitforsilence.so">
+		</member>
+		<member name="app_while" displayname="While Loops and Conditional Execution" remove_on_change="apps/app_while.o apps/app_while.so">
+		</member>
+		<member name="app_zapateller" displayname="Block Telemarketers with Special Information Tone" remove_on_change="apps/app_zapateller.o apps/app_zapateller.so">
+		</member>
+		<member name="app_zapbarge" displayname="Barge in on Zap channel application" remove_on_change="apps/app_zapbarge.o apps/app_zapbarge.so">
+	<depend>zaptel</depend>
+		</member>
+		<member name="app_zapras" displayname="Zap RAS Application" remove_on_change="apps/app_zapras.o apps/app_zapras.so">
+	<depend>zaptel</depend>
+		</member>
+		<member name="app_zapscan" displayname="Scan Zap channels application" remove_on_change="apps/app_zapscan.o apps/app_zapscan.so">
+	<depend>zaptel</depend>
+		</member>
+	</category>
+	<category name="MENUSELECT_CDR" displayname="Call Detail Recording">
+		<member name="cdr_csv" displayname="Comma Separated Values CDR Backend" remove_on_change="cdr/cdr_csv.o cdr/cdr_csv.so">
+		</member>
+		<member name="cdr_custom" displayname="Customizable Comma Separated Values CDR Backend" remove_on_change="cdr/cdr_custom.o cdr/cdr_custom.so">
+		</member>
+		<member name="cdr_manager" displayname="Asterisk Call Manager CDR Backend" remove_on_change="cdr/cdr_manager.o cdr/cdr_manager.so">
+		</member>
+		<member name="cdr_odbc" displayname="ODBC CDR Backend" remove_on_change="cdr/cdr_odbc.o cdr/cdr_odbc.so">
+	<depend>unixodbc</depend>
+		</member>
+		<member name="cdr_pgsql" displayname="PostgreSQL CDR Backend" remove_on_change="cdr/cdr_pgsql.o cdr/cdr_pgsql.so">
+	<depend>pgsql</depend>
+		</member>
+		<member name="cdr_radius" displayname="RADIUS CDR Backend" remove_on_change="cdr/cdr_radius.o cdr/cdr_radius.so">
+	<depend>radiusclient</depend>
+		</member>
+		<member name="cdr_sqlite" displayname="SQLite CDR Backend" remove_on_change="cdr/cdr_sqlite.o cdr/cdr_sqlite.so">
+	<depend>sqlite</depend>
+		</member>
+		<member name="cdr_tds" displayname="MSSQL CDR Backend" remove_on_change="cdr/cdr_tds.o cdr/cdr_tds.so">
+	<depend>freetds</depend>
+		</member>
+	</category>
+	<category name="MENUSELECT_CHANNELS" displayname="Channel Drivers">
+		<member name="chan_agent" displayname="Agent Proxy Channel" remove_on_change="channels/chan_agent.o channels/chan_agent.so">
+		</member>
+		<member name="chan_alsa" displayname="ALSA Console Channel Driver" remove_on_change="channels/chan_alsa.o channels/chan_alsa.so">
+	<depend>asound</depend>
+		</member>
+		<member name="chan_features" displayname="Feature Proxy Channel" remove_on_change="channels/chan_features.o channels/chan_features.so">
+		</member>
+		<member name="chan_h323" displayname="The NuFone Network's Open H.323 Channel Driver" remove_on_change="channels/chan_h323.o channels/chan_h323.so">
+	<depend>h323</depend>
+		</member>
+		<member name="chan_iax2" displayname="Inter Asterisk eXchange (Ver 2)" remove_on_change="channels/chan_iax2.o channels/chan_iax2.so">
+		</member>
+		<member name="chan_jingle" displayname="Jingle Channel Driver" remove_on_change="channels/chan_jingle.o channels/chan_jingle.so">
+	<depend>iksemel</depend>
+		</member>
+		<member name="chan_local" displayname="Local Proxy Channel" remove_on_change="channels/chan_local.o channels/chan_local.so">
+		</member>
+		<member name="chan_mgcp" displayname="Media Gateway Control Protocol (MGCP)" remove_on_change="channels/chan_mgcp.o channels/chan_mgcp.so">
+		</member>
+		<member name="chan_misdn" displayname="Channel driver for mISDN Support (Bri/Pri)" remove_on_change="channels/chan_misdn.o channels/chan_misdn.so">
+		</member>
+		<member name="chan_nbs" displayname="Network Broadcast Sound Driver" remove_on_change="channels/chan_nbs.o channels/chan_nbs.so">
+	<depend>nbs</depend>
+		</member>
+		<member name="chan_oss" displayname="OSS Console Channel Driver" remove_on_change="channels/chan_oss.o channels/chan_oss.so">
+	<depend>ossaudio</depend>
+		</member>
+		<member name="chan_phone" displayname="Standard Linux Telephony API Driver" remove_on_change="channels/chan_phone.o channels/chan_phone.so">
+	<depend>ixjuser</depend>
+		</member>
+		<member name="chan_sip" displayname="Session Initiation Protocol (SIP)" remove_on_change="channels/chan_sip.o channels/chan_sip.so">
+		</member>
+		<member name="chan_skinny" displayname="Skinny Client Control Protocol (Skinny)" remove_on_change="channels/chan_skinny.o channels/chan_skinny.so">
+		</member>
+		<member name="chan_vpb" displayname="Standard VoiceTronix API Driver" remove_on_change="channels/chan_vpb.o channels/chan_vpb.so">
+	<depend>vpbapi</depend>
+		</member>
+		<member name="chan_zap" displayname="Zapata Telephony" remove_on_change="channels/chan_zap.o channels/chan_zap.so">
+	<depend>zaptel</depend>
+		</member>
+	</category>
+	<category name="MENUSELECT_CODECS" displayname="Codec Translators">
+		<member name="codec_a_mu" displayname="A-law and Mulaw direct Coder/Decoder" remove_on_change="codecs/codec_a_mu.o codecs/codec_a_mu.so">
+		</member>
+		<member name="codec_adpcm" displayname="Adaptive Differential PCM Coder/Decoder" remove_on_change="codecs/codec_adpcm.o codecs/codec_adpcm.so">
+		</member>
+		<member name="codec_alaw" displayname="A-law Coder/Decoder" remove_on_change="codecs/codec_alaw.o codecs/codec_alaw.so">
+		</member>
+		<member name="codec_g723_1" displayname="" remove_on_change="codecs/codec_g723_1.o codecs/codec_g723_1.so">
+	<defaultenabled>no</defaultenabled>
+		</member>
+		<member name="codec_g726" displayname="ITU G.726-32kbps G726 Transcoder" remove_on_change="codecs/codec_g726.o codecs/codec_g726.so">
+		</member>
+		<member name="codec_gsm" displayname="GSM/PCM16 (signed linear) Codec Translator" remove_on_change="codecs/codec_gsm.o codecs/codec_gsm.so">
+	<depend>libgsm</depend>
+		</member>
+		<member name="codec_ilbc" displayname="iLBC/PCM16 (signed linear) Codec Translator" remove_on_change="codecs/codec_ilbc.o codecs/codec_ilbc.so">
+		</member>
+		<member name="codec_lpc10" displayname="LPC10 2.4kbps (signed linear) Voice Coder" remove_on_change="codecs/codec_lpc10.o codecs/codec_lpc10.so">
+		</member>
+		<member name="codec_speex" displayname="Speex/PCM16 (signed linear) Codec Translator" remove_on_change="codecs/codec_speex.o codecs/codec_speex.so">
+	<depend>libspeex</depend>
+		</member>
+		<member name="codec_ulaw" displayname="Mu-law Coder/Decoder" remove_on_change="codecs/codec_ulaw.o codecs/codec_ulaw.so">
+		</member>
+		<member name="codec_zap" displayname="Generic Zaptel Transcoder Codec Translator" remove_on_change="codecs/codec_zap.o codecs/codec_zap.so">
+	<depend>zaptel</depend>
+		</member>
+	</category>
+	<category name="MENUSELECT_FORMATS" displayname="Format Interpreters">
+		<member name="format_g723" displayname="G.723.1 Simple Timestamp File Format" remove_on_change="formats/format_g723.o formats/format_g723.so">
+		</member>
+		<member name="format_g726" displayname="Raw G.726 (16/24/32/40kbps) data" remove_on_change="formats/format_g726.o formats/format_g726.so">
+		</member>
+		<member name="format_g729" displayname="Raw G729 data" remove_on_change="formats/format_g729.o formats/format_g729.so">
+		</member>
+		<member name="format_gsm" displayname="Raw GSM data" remove_on_change="formats/format_gsm.o formats/format_gsm.so">
+		</member>
+		<member name="format_h263" displayname="Raw h263 data" remove_on_change="formats/format_h263.o formats/format_h263.so">
+		</member>
+		<member name="format_h264" displayname="Raw h264 data" remove_on_change="formats/format_h264.o formats/format_h264.so">
+		</member>
+		<member name="format_ilbc" displayname="Raw iLBC data" remove_on_change="formats/format_ilbc.o formats/format_ilbc.so">
+		</member>
+		<member name="format_jpeg" displayname="JPEG (Joint Picture Experts Group) Image Format" remove_on_change="formats/format_jpeg.o formats/format_jpeg.so">
+		</member>
+		<member name="format_ogg_vorbis" displayname="OGG/Vorbis audio" remove_on_change="formats/format_ogg_vorbis.o formats/format_ogg_vorbis.so">
+	<depend>libvorbis</depend>
+	<depend>ogg</depend>
+		</member>
+		<member name="format_pcm" displayname="Raw/Sun uLaw/ALaw 8khz Audio support (PCM,PCMA,AU)" remove_on_change="formats/format_pcm.o formats/format_pcm.so">
+		</member>
+		<member name="format_sln" displayname="Raw Signed Linear Audio support (SLN)" remove_on_change="formats/format_sln.o formats/format_sln.so">
+		</member>
+		<member name="format_vox" displayname="Dialogic VOX (ADPCM) File Format" remove_on_change="formats/format_vox.o formats/format_vox.so">
+		</member>
+		<member name="format_wav" displayname="Microsoft WAV format (8000hz Signed Linear)" remove_on_change="formats/format_wav.o formats/format_wav.so">
+		</member>
+		<member name="format_wav_gsm" displayname="Microsoft WAV format (Proprietary GSM)" remove_on_change="formats/format_wav_gsm.o formats/format_wav_gsm.so">
+		</member>
+	</category>
+	<category name="MENUSELECT_FUNCS" displayname="Dialplan Functions">
+		<member name="func_base64" displayname="base64 encode/decode dialplan functions" remove_on_change="funcs/func_base64.o funcs/func_base64.so">
+		</member>
+		<member name="func_callerid" displayname="Caller ID related dialplan function" remove_on_change="funcs/func_callerid.o funcs/func_callerid.so">
+		</member>
+		<member name="func_cdr" displayname="CDR dialplan function" remove_on_change="funcs/func_cdr.o funcs/func_cdr.so">
+		</member>
+		<member name="func_channel" displayname="Channel information dialplan function" remove_on_change="funcs/func_channel.o funcs/func_channel.so">
+		</member>
+		<member name="func_curl" displayname="Load external URL" remove_on_change="funcs/func_curl.o funcs/func_curl.so">
+	<depend>curl</depend>
+		</member>
+		<member name="func_cut" displayname="Cut out information from a string" remove_on_change="funcs/func_cut.o funcs/func_cut.so">
+		</member>
+		<member name="func_db" displayname="Database (astdb) related dialplan functions" remove_on_change="funcs/func_db.o funcs/func_db.so">
+		</member>
+		<member name="func_enum" displayname="ENUM related dialplan functions" remove_on_change="funcs/func_enum.o funcs/func_enum.so">
+		</member>
+		<member name="func_env" displayname="Environment/filesystem dialplan functions" remove_on_change="funcs/func_env.o funcs/func_env.so">
+		</member>
+		<member name="func_global" displayname="Global variable dialplan functions" remove_on_change="funcs/func_global.o funcs/func_global.so">
+		</member>
+		<member name="func_groupcount" displayname="Channel group dialplan functions" remove_on_change="funcs/func_groupcount.o funcs/func_groupcount.so">
+		</member>
+		<member name="func_language" displayname="Channel language dialplan function" remove_on_change="funcs/func_language.o funcs/func_language.so">
+		</member>
+		<member name="func_logic" displayname="Logical dialplan functions" remove_on_change="funcs/func_logic.o funcs/func_logic.so">
+		</member>
+		<member name="func_math" displayname="Mathematical dialplan function" remove_on_change="funcs/func_math.o funcs/func_math.so">
+		</member>
+		<member name="func_md5" displayname="MD5 digest dialplan functions" remove_on_change="funcs/func_md5.o funcs/func_md5.so">
+		</member>
+		<member name="func_moh" displayname="Music-on-hold dialplan function" remove_on_change="funcs/func_moh.o funcs/func_moh.so">
+		</member>
+		<member name="func_odbc" displayname="ODBC lookups" remove_on_change="funcs/func_odbc.o funcs/func_odbc.so">
+	<depend>unixodbc</depend>
+		</member>
+		<member name="func_rand" displayname="Random number dialplan function" remove_on_change="funcs/func_rand.o funcs/func_rand.so">
+		</member>
+		<member name="func_realtime" displayname="Read/Write values from a RealTime repository" remove_on_change="funcs/func_realtime.o funcs/func_realtime.so">
+		</member>
+		<member name="func_sha1" displayname="SHA-1 computation dialplan function" remove_on_change="funcs/func_sha1.o funcs/func_sha1.so">
+		</member>
+		<member name="func_strings" displayname="String handling dialplan functions" remove_on_change="funcs/func_strings.o funcs/func_strings.so">
+		</member>
+		<member name="func_timeout" displayname="Channel timeout dialplan functions" remove_on_change="funcs/func_timeout.o funcs/func_timeout.so">
+		</member>
+		<member name="func_uri" displayname="URI encode/decode dialplan functions" remove_on_change="funcs/func_uri.o funcs/func_uri.so">
+		</member>
+	</category>
+	<category name="MENUSELECT_PBX" displayname="PBX Modules">
+		<member name="pbx_ael" displayname="Asterisk Extension Language Compiler v2" remove_on_change="pbx/pbx_ael.o pbx/pbx_ael.so">
+		</member>
+		<member name="pbx_config" displayname="Text Extension Configuration" remove_on_change="pbx/pbx_config.o pbx/pbx_config.so">
+		</member>
+		<member name="pbx_dundi" displayname="Distributed Universal Number Discovery (DUNDi)" remove_on_change="pbx/pbx_dundi.o pbx/pbx_dundi.so">
+	<depend>zlib</depend>
+		</member>
+		<member name="pbx_gtkconsole" displayname="Asterisk PBX Console (GTK Version)" remove_on_change="pbx/pbx_gtkconsole.o pbx/pbx_gtkconsole.so">
+	<depend>gtk</depend>
+	<defaultenabled>no</defaultenabled>
+		</member>
+		<member name="pbx_loopback" displayname="Loopback Switch" remove_on_change="pbx/pbx_loopback.o pbx/pbx_loopback.so">
+		</member>
+		<member name="pbx_realtime" displayname="Realtime Switch" remove_on_change="pbx/pbx_realtime.o pbx/pbx_realtime.so">
+		</member>
+		<member name="pbx_spool" displayname="Outgoing Spool Support" remove_on_change="pbx/pbx_spool.o pbx/pbx_spool.so">
+		</member>
+	</category>
+	<category name="MENUSELECT_RES" displayname="Resource Modules">
+		<member name="res_adsi" displayname="ADSI Resource" remove_on_change="res/res_adsi.o res/res_adsi.so">
+		</member>
+		<member name="res_agi" displayname="Asterisk Gateway Interface (AGI)" remove_on_change="res/res_agi.o res/res_agi.so">
+		</member>
+		<member name="res_clioriginate" displayname="Call origination from the CLI" remove_on_change="res/res_clioriginate.o res/res_clioriginate.so">
+		</member>
+		<member name="res_config_odbc" displayname="ODBC Configuration" remove_on_change="res/res_config_odbc.o res/res_config_odbc.so">
+	<depend>unixodbc</depend>
+		</member>
+		<member name="res_config_pgsql" displayname="Postgresql RealTime Configuration Driver" remove_on_change="res/res_config_pgsql.o res/res_config_pgsql.so">
+	<depend>pgsql</depend>
+		</member>
+		<member name="res_convert" displayname="File format conversion CLI command" remove_on_change="res/res_convert.o res/res_convert.so">
+		</member>
+		<member name="res_crypto" displayname="Cryptographic Digital Signatures" remove_on_change="res/res_crypto.o res/res_crypto.so">
+	<depend>ssl</depend>
+		</member>
+		<member name="res_features" displayname="Call Features Resource" remove_on_change="res/res_features.o res/res_features.so">
+		</member>
+		<member name="res_indications" displayname="Indications Configuration" remove_on_change="res/res_indications.o res/res_indications.so">
+		</member>
+		<member name="res_jabber" displayname="AJI - Asterisk JABBER Interface" remove_on_change="res/res_jabber.o res/res_jabber.so">
+	<depend>iksemel</depend>
+		</member>
+		<member name="res_monitor" displayname="Call Monitoring Resource" remove_on_change="res/res_monitor.o res/res_monitor.so">
+		</member>
+		<member name="res_musiconhold" displayname="Music On Hold Resource" remove_on_change="res/res_musiconhold.o res/res_musiconhold.so">
+	<conflict>win32</conflict>
+		</member>
+		<member name="res_odbc" displayname="ODBC Resource" remove_on_change="res/res_odbc.o res/res_odbc.so">
+	<depend>unixodbc</depend>
+		</member>
+		<member name="res_osp" displayname="Open Settlement Protocol Support" remove_on_change="res/res_osp.o res/res_osp.so">
+	<depend>libosptk</depend>
+	<depend>ssl</depend>
+		</member>
+		<member name="res_smdi" displayname="Asterisk Simplified Message Desk Interface (SMDI) Module" remove_on_change="res/res_smdi.o res/res_smdi.so">
+		</member>
+		<member name="res_snmp" displayname="SNMP [Sub]Agent for Asterisk" remove_on_change="res/res_snmp.o res/res_snmp.so">
+	<depend>netsnmp</depend>
+	<defaultenabled>no</defaultenabled>
+		</member>
+		<member name="res_speech" displayname="Generic Speech Recognition API" remove_on_change="res/res_speech.o res/res_speech.so">
+		</member>
+	</category>
+	<category name="MENUSELECT_CFLAGS" displayname="Compiler Flags" positive_output="yes" remove_on_change=".lastclean">
+		<member name="DEBUG_CHANNEL_LOCKS" displayname="Debug Channel Locking">
+		</member>
+		<member name="DEBUG_SCHEDULER" displayname="Enable Scheduler Debugging Output">
+		</member>
+		<member name="DEBUG_THREADS" displayname="Enable Thread Debugging">
+		</member>
+		<member name="DETECT_DEADLOCKS" displayname="Detect Deadlocks">
+		</member>
+		<member name="DONT_OPTIMIZE" displayname="Disable Optimizations from the Compiler">
+		</member>
+		<member name="DUMP_SCHEDULER" displayname="Dump Scheduler Contents for Debugging">
+		</member>
+		<member name="LOW_MEMORY" displayname="Optimize for Low Memory Usage">
+		</member>
+		<member name="MALLOC_DEBUG" displayname="Keep Track of Memory Allocations">
+		</member>
+		<member name="MTX_PROFILE" displayname="Enable Code Profiling Using TSC Counters">
+		</member>
+		<member name="RADIO_RELAX" displayname="Relax DTMF for Radio Applications">
+		</member>
+		<member name="TRACE_FRAMES" displayname="Trace Frame Allocations">
+		</member>
+	</category>
+	<category name="MENUSELECT_CORE_SOUNDS" displayname="Core Sound Packages" positive_output="yes">
+		<member name="CORE-SOUNDS-EN-WAV" displayname="English, WAV format">
+		</member>
+		<member name="CORE-SOUNDS-EN-ULAW" displayname="English, mu-Law format">
+		</member>
+		<member name="CORE-SOUNDS-EN-ALAW" displayname="English, a-Law format">
+		</member>
+		<member name="CORE-SOUNDS-EN-GSM" displayname="English, GSM format" >
+			<defaultenabled>yes</defaultenabled>
+		</member>
+		<member name="CORE-SOUNDS-EN-G729" displayname="English, G.729 format">
+		</member>
+		<member name="CORE-SOUNDS-ES-WAV" displayname="Spanish, WAV format">
+		</member>
+		<member name="CORE-SOUNDS-ES-ULAW" displayname="Spanish, mu-Law format">
+		</member>
+		<member name="CORE-SOUNDS-ES-ALAW" displayname="Spanish, a-Law format">
+		</member>
+		<member name="CORE-SOUNDS-ES-GSM" displayname="Spanish, GSM format">
+		</member>
+		<member name="CORE-SOUNDS-ES-G729" displayname="Spanish, G.729 format">
+		</member>
+		<member name="CORE-SOUNDS-FR-WAV" displayname="French, WAV format">
+		</member>
+		<member name="CORE-SOUNDS-FR-ULAW" displayname="French, mu-Law format">
+		</member>
+		<member name="CORE-SOUNDS-FR-ALAW" displayname="French, a-Law format">
+		</member>
+		<member name="CORE-SOUNDS-FR-GSM" displayname="French, GSM format">
+		</member>
+		<member name="CORE-SOUNDS-FR-G729" displayname="French, G.729 format">
+		</member>
+	</category>
+	<category name="MENUSELECT_EXTRA_SOUNDS" displayname="Extras Sound Packages" positive_output="yes">
+		<member name="EXTRA-SOUNDS-EN-WAV" displayname="English, WAV format">
+		</member>
+		<member name="EXTRA-SOUNDS-EN-ULAW" displayname="English, mu-Law format">
+		</member>
+		<member name="EXTRA-SOUNDS-EN-ALAW" displayname="English, a-Law format">
+		</member>
+		<member name="EXTRA-SOUNDS-EN-GSM" displayname="English, GSM format" >
+		</member>
+		<member name="EXTRA-SOUNDS-EN-G729" displayname="English, G.729 format">
+		</member>
+	</category>
+<category name="MENUSELECT_app_voicemail" displayname="Voicemail Build Options" positive_output="yes" remove_on_change="apps/app_voicemail.o">
+	<member name="ODBC_STORAGE" displayname="Storage of Voicemail using ODBC">
+		<depend>unixodbc</depend>
+		<defaultenabled>no</defaultenabled>
+	</member>
+	<member name="EXTENDED_ODBC_STORAGE" displayname="Storage of Voicemail using ODBC (extended)">
+		<depend>unixodbc</depend>
+		<defaultenabled>no</defaultenabled>
+	</member>
+</category>
+</menu>

menuselect/install-sh

@@ -0,0 +1,323 @@
+#!/bin/sh
+# install - install a program, script, or datafile
+
+scriptversion=2005-05-14.22
+
+# This originates from X11R5 (mit/util/scripts/install.sh), which was
+# later released in X11R6 (xc/config/util/install.sh) with the
+# following copyright and license.
+#
+# Copyright (C) 1994 X Consortium
+#
+# Permission is hereby granted, free of charge, to any person obtaining a copy
+# of this software and associated documentation files (the "Software"), to
+# deal in the Software without restriction, including without limitation the
+# rights to use, copy, modify, merge, publish, distribute, sublicense, and/or
+# sell copies of the Software, and to permit persons to whom the Software is
+# furnished to do so, subject to the following conditions:
+#
+# The above copyright notice and this permission notice shall be included in
+# all copies or substantial portions of the Software.
+#
+# THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+# IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
+# FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT.  IN NO EVENT SHALL THE
+# X CONSORTIUM BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN
+# AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN CONNEC-
+# TION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE.
+#
+# Except as contained in this notice, the name of the X Consortium shall not
+# be used in advertising or otherwise to promote the sale, use or other deal-
+# ings in this Software without prior written authorization from the X Consor-
+# tium.
+#
+#
+# FSF changes to this file are in the public domain.
+#
+# Calling this script install-sh is preferred over install.sh, to prevent
+# `make' implicit rules from creating a file called install from it
+# when there is no Makefile.
+#
+# This script is compatible with the BSD install script, but was written
+# from scratch.  It can only install one file at a time, a restriction
+# shared with many OS's install programs.
+
+# set DOITPROG to echo to test this script
+
+# Don't use :- since 4.3BSD and earlier shells don't like it.
+doit="${DOITPROG-}"
+
+# put in absolute paths if you don't have them in your path; or use env. vars.
+
+mvprog="${MVPROG-mv}"
+cpprog="${CPPROG-cp}"
+chmodprog="${CHMODPROG-chmod}"
+chownprog="${CHOWNPROG-chown}"
+chgrpprog="${CHGRPPROG-chgrp}"
+stripprog="${STRIPPROG-strip}"
+rmprog="${RMPROG-rm}"
+mkdirprog="${MKDIRPROG-mkdir}"
+
+chmodcmd="$chmodprog 0755"
+chowncmd=
+chgrpcmd=
+stripcmd=
+rmcmd="$rmprog -f"
+mvcmd="$mvprog"
+src=
+dst=
+dir_arg=
+dstarg=
+no_target_directory=
+
+usage="Usage: $0 [OPTION]... [-T] SRCFILE DSTFILE
+   or: $0 [OPTION]... SRCFILES... DIRECTORY
+   or: $0 [OPTION]... -t DIRECTORY SRCFILES...
+   or: $0 [OPTION]... -d DIRECTORIES...
+
+In the 1st form, copy SRCFILE to DSTFILE.
+In the 2nd and 3rd, copy all SRCFILES to DIRECTORY.
+In the 4th, create DIRECTORIES.
+
+Options:
+-c         (ignored)
+-d         create directories instead of installing files.
+-g GROUP   $chgrpprog installed files to GROUP.
+-m MODE    $chmodprog installed files to MODE.
+-o USER    $chownprog installed files to USER.
+-s         $stripprog installed files.
+-t DIRECTORY  install into DIRECTORY.
+-T         report an error if DSTFILE is a directory.
+--help     display this help and exit.
+--version  display version info and exit.
+
+Environment variables override the default commands:
+  CHGRPPROG CHMODPROG CHOWNPROG CPPROG MKDIRPROG MVPROG RMPROG STRIPPROG
+"
+
+while test -n "$1"; do
+  case $1 in
+    -c) shift
+        continue;;
+
+    -d) dir_arg=true
+        shift
+        continue;;
+
+    -g) chgrpcmd="$chgrpprog $2"
+        shift
+        shift
+        continue;;
+
+    --help) echo "$usage"; exit $?;;
+
+    -m) chmodcmd="$chmodprog $2"
+        shift
+        shift
+        continue;;
+
+    -o) chowncmd="$chownprog $2"
+        shift
+        shift
+        continue;;
+
+    -s) stripcmd=$stripprog
+        shift
+        continue;;
+
+    -t) dstarg=$2
+	shift
+	shift
+	continue;;
+
+    -T) no_target_directory=true
+	shift
+	continue;;
+
+    --version) echo "$0 $scriptversion"; exit $?;;
+
+    *)  # When -d is used, all remaining arguments are directories to create.
+	# When -t is used, the destination is already specified.
+	test -n "$dir_arg$dstarg" && break
+        # Otherwise, the last argument is the destination.  Remove it from $@.
+	for arg
+	do
+          if test -n "$dstarg"; then
+	    # $@ is not empty: it contains at least $arg.
+	    set fnord "$@" "$dstarg"
+	    shift # fnord
+	  fi
+	  shift # arg
+	  dstarg=$arg
+	done
+	break;;
+  esac
+done
+
+if test -z "$1"; then
+  if test -z "$dir_arg"; then
+    echo "$0: no input file specified." >&2
+    exit 1
+  fi
+  # It's OK to call `install-sh -d' without argument.
+  # This can happen when creating conditional directories.
+  exit 0
+fi
+
+for src
+do
+  # Protect names starting with `-'.
+  case $src in
+    -*) src=./$src ;;
+  esac
+
+  if test -n "$dir_arg"; then
+    dst=$src
+    src=
+
+    if test -d "$dst"; then
+      mkdircmd=:
+      chmodcmd=
+    else
+      mkdircmd=$mkdirprog
+    fi
+  else
+    # Waiting for this to be detected by the "$cpprog $src $dsttmp" command
+    # might cause directories to be created, which would be especially bad
+    # if $src (and thus $dsttmp) contains '*'.
+    if test ! -f "$src" && test ! -d "$src"; then
+      echo "$0: $src does not exist." >&2
+      exit 1
+    fi
+
+    if test -z "$dstarg"; then
+      echo "$0: no destination specified." >&2
+      exit 1
+    fi
+
+    dst=$dstarg
+    # Protect names starting with `-'.
+    case $dst in
+      -*) dst=./$dst ;;
+    esac
+
+    # If destination is a directory, append the input filename; won't work
+    # if double slashes aren't ignored.
+    if test -d "$dst"; then
+      if test -n "$no_target_directory"; then
+	echo "$0: $dstarg: Is a directory" >&2
+	exit 1
+      fi
+      dst=$dst/`basename "$src"`
+    fi
+  fi
+
+  # This sed command emulates the dirname command.
+  dstdir=`echo "$dst" | sed -e 's,/*$,,;s,[^/]*$,,;s,/*$,,;s,^$,.,'`
+
+  # Make sure that the destination directory exists.
+
+  # Skip lots of stat calls in the usual case.
+  if test ! -d "$dstdir"; then
+    defaultIFS='
+	 '
+    IFS="${IFS-$defaultIFS}"
+
+    oIFS=$IFS
+    # Some sh's can't handle IFS=/ for some reason.
+    IFS='%'
+    set x `echo "$dstdir" | sed -e 's@/@%@g' -e 's@^%@/@'`
+    shift
+    IFS=$oIFS
+
+    pathcomp=
+
+    while test $# -ne 0 ; do
+      pathcomp=$pathcomp$1
+      shift
+      if test ! -d "$pathcomp"; then
+        $mkdirprog "$pathcomp"
+	# mkdir can fail with a `File exist' error in case several
+	# install-sh are creating the directory concurrently.  This
+	# is OK.
+	test -d "$pathcomp" || exit
+      fi
+      pathcomp=$pathcomp/
+    done
+  fi
+
+  if test -n "$dir_arg"; then
+    $doit $mkdircmd "$dst" \
+      && { test -z "$chowncmd" || $doit $chowncmd "$dst"; } \
+      && { test -z "$chgrpcmd" || $doit $chgrpcmd "$dst"; } \
+      && { test -z "$stripcmd" || $doit $stripcmd "$dst"; } \
+      && { test -z "$chmodcmd" || $doit $chmodcmd "$dst"; }
+
+  else
+    dstfile=`basename "$dst"`
+
+    # Make a couple of temp file names in the proper directory.
+    dsttmp=$dstdir/_inst.$$_
+    rmtmp=$dstdir/_rm.$$_
+
+    # Trap to clean up those temp files at exit.
+    trap 'ret=$?; rm -f "$dsttmp" "$rmtmp" && exit $ret' 0
+    trap '(exit $?); exit' 1 2 13 15
+
+    # Copy the file name to the temp name.
+    $doit $cpprog "$src" "$dsttmp" &&
+
+    # and set any options; do chmod last to preserve setuid bits.
+    #
+    # If any of these fail, we abort the whole thing.  If we want to
+    # ignore errors from any of these, just make sure not to ignore
+    # errors from the above "$doit $cpprog $src $dsttmp" command.
+    #
+    { test -z "$chowncmd" || $doit $chowncmd "$dsttmp"; } \
+      && { test -z "$chgrpcmd" || $doit $chgrpcmd "$dsttmp"; } \
+      && { test -z "$stripcmd" || $doit $stripcmd "$dsttmp"; } \
+      && { test -z "$chmodcmd" || $doit $chmodcmd "$dsttmp"; } &&
+
+    # Now rename the file to the real destination.
+    { $doit $mvcmd -f "$dsttmp" "$dstdir/$dstfile" 2>/dev/null \
+      || {
+	   # The rename failed, perhaps because mv can't rename something else
+	   # to itself, or perhaps because mv is so ancient that it does not
+	   # support -f.
+
+	   # Now remove or move aside any old file at destination location.
+	   # We try this two ways since rm can't unlink itself on some
+	   # systems and the destination file might be busy for other
+	   # reasons.  In this case, the final cleanup might fail but the new
+	   # file should still install successfully.
+	   {
+	     if test -f "$dstdir/$dstfile"; then
+	       $doit $rmcmd -f "$dstdir/$dstfile" 2>/dev/null \
+	       || $doit $mvcmd -f "$dstdir/$dstfile" "$rmtmp" 2>/dev/null \
+	       || {
+		 echo "$0: cannot unlink or rename $dstdir/$dstfile" >&2
+		 (exit 1); exit 1
+	       }
+	     else
+	       :
+	     fi
+	   } &&
+
+	   # Now rename the file to the real destination.
+	   $doit $mvcmd "$dsttmp" "$dstdir/$dstfile"
+	 }
+    }
+  fi || { (exit 1); exit 1; }
+done
+
+# The final little trick to "correctly" pass the exit status to the exit trap.
+{
+  (exit 0); exit 0
+}
+
+# Local variables:
+# eval: (add-hook 'write-file-hooks 'time-stamp)
+# time-stamp-start: "scriptversion="
+# time-stamp-format: "%:y-%02m-%02d.%02H"
+# time-stamp-end: "$"
+# End:

menuselect/linkedlists.h

@@ -0,0 +1,372 @@
+/*
+ * Asterisk -- An open source telephony toolkit.
+ *
+ * Copyright (C) 1999 - 2006, Digium, Inc.
+ *
+ * Mark Spencer <markster@digium.com>
+ * Kevin P. Fleming <kpfleming@digium.com>
+ *
+ * See http://www.asterisk.org for more information about
+ * the Asterisk project. Please do not directly contact
+ * any of the maintainers of this project for assistance;
+ * the project provides a web site, mailing lists and IRC
+ * channels for your use.
+ *
+ * This program is free software, distributed under the terms of
+ * the GNU General Public License Version 2. See the LICENSE file
+ * at the top of the source tree.
+ */
+
+#ifndef ASTERISK_LINKEDLISTS_H
+#define ASTERISK_LINKEDLISTS_H
+
+/*!
+  \brief Defines a structure to be used to hold a list of specified type (with no lock).
+  \param name This will be the name of the defined structure.
+  \param type This is the type of each list entry.
+
+  This macro creates a structure definition that can be used
+  to hold a list of the entries of type \a type. It does not actually
+  declare (allocate) a structure; to do that, either follow this
+  macro with the desired name of the instance you wish to declare,
+  or use the specified \a name to declare instances elsewhere.
+
+  Example usage:
+  \code
+  static AST_LIST_HEAD_NOLOCK(entry_list, entry) entries;
+  \endcode
+
+  This would define \c struct \c entry_list, and declare an instance of it named
+  \a entries, all intended to hold a list of type \c struct \c entry.
+*/
+#define AST_LIST_HEAD_NOLOCK(name, type)				\
+struct name {								\
+	struct type *first;						\
+	struct type *last;						\
+}
+
+/*!
+  \brief Defines initial values for a declaration of AST_LIST_HEAD_NOLOCK
+*/
+#define AST_LIST_HEAD_NOLOCK_INIT_VALUE	{	\
+	.first = NULL,					\
+	.last = NULL,					\
+	}
+
+/*!
+  \brief Defines a structure to be used to hold a list of specified type, statically initialized.
+
+  This is the same as AST_LIST_HEAD_STATIC, except without the lock included.
+*/
+#define AST_LIST_HEAD_NOLOCK_STATIC(name, type)				\
+struct name {								\
+	struct type *first;						\
+	struct type *last;						\
+} name = AST_LIST_HEAD_NOLOCK_INIT_VALUE
+
+/*!
+  \brief Initializes a list head structure with a specified first entry.
+  \param head This is a pointer to the list head structure
+  \param entry pointer to the list entry that will become the head of the list
+
+  This macro initializes a list head structure by setting the head
+  entry to the supplied value.
+*/
+#define AST_LIST_HEAD_SET_NOLOCK(head, entry) do {			\
+	(head)->first = (entry);					\
+	(head)->last = (entry);						\
+} while (0)
+
+/*!
+  \brief Declare a forward link structure inside a list entry.
+  \param type This is the type of each list entry.
+
+  This macro declares a structure to be used to link list entries together.
+  It must be used inside the definition of the structure named in
+  \a type, as follows:
+
+  \code
+  struct list_entry {
+  	...
+  	AST_LIST_ENTRY(list_entry) list;
+  }
+  \endcode
+
+  The field name \a list here is arbitrary, and can be anything you wish.
+*/
+#define AST_LIST_ENTRY(type)						\
+struct {								\
+	struct type *next;						\
+}
+ 
+/*!
+  \brief Returns the first entry contained in a list.
+  \param head This is a pointer to the list head structure
+ */
+#define	AST_LIST_FIRST(head)	((head)->first)
+
+/*!
+  \brief Returns the last entry contained in a list.
+  \param head This is a pointer to the list tail structure
+ */
+#define	AST_LIST_LAST(head)	((head)->last)
+
+/*!
+  \brief Returns the next entry in the list after the given entry.
+  \param elm This is a pointer to the current entry.
+  \param field This is the name of the field (declared using AST_LIST_ENTRY())
+  used to link entries of this list together.
+*/
+#define AST_LIST_NEXT(elm, field)	((elm)->field.next)
+
+/*!
+  \brief Checks whether the specified list contains any entries.
+  \param head This is a pointer to the list head structure
+
+  Returns non-zero if the list has entries, zero if not.
+ */
+#define	AST_LIST_EMPTY(head)	(AST_LIST_FIRST(head) == NULL)
+
+/*!
+  \brief Loops over (traverses) the entries in a list.
+  \param head This is a pointer to the list head structure
+  \param var This is the name of the variable that will hold a pointer to the
+  current list entry on each iteration. It must be declared before calling
+  this macro.
+  \param field This is the name of the field (declared using AST_LIST_ENTRY())
+  used to link entries of this list together.
+
+  This macro is use to loop over (traverse) the entries in a list. It uses a
+  \a for loop, and supplies the enclosed code with a pointer to each list
+  entry as it loops. It is typically used as follows:
+  \code
+  static AST_LIST_HEAD(entry_list, list_entry) entries;
+  ...
+  struct list_entry {
+  	...
+  	AST_LIST_ENTRY(list_entry) list;
+  }
+  ...
+  struct list_entry *current;
+  ...
+  AST_LIST_TRAVERSE(&entries, current, list) {
+     (do something with current here)
+  }
+  \endcode
+  \warning If you modify the forward-link pointer contained in the \a current entry while
+  inside the loop, the behavior will be unpredictable. At a minimum, the following
+  macros will modify the forward-link pointer, and should not be used inside
+  AST_LIST_TRAVERSE() against the entry pointed to by the \a current pointer without
+  careful consideration of their consequences:
+  \li AST_LIST_NEXT() (when used as an lvalue)
+  \li AST_LIST_INSERT_AFTER()
+  \li AST_LIST_INSERT_HEAD()
+  \li AST_LIST_INSERT_TAIL()
+*/
+#define AST_LIST_TRAVERSE(head,var,field) 				\
+	for((var) = (head)->first; (var); (var) = (var)->field.next)
+
+/*!
+  \brief Loops safely over (traverses) the entries in a list.
+  \param head This is a pointer to the list head structure
+  \param var This is the name of the variable that will hold a pointer to the
+  current list entry on each iteration. It must be declared before calling
+  this macro.
+  \param field This is the name of the field (declared using AST_LIST_ENTRY())
+  used to link entries of this list together.
+
+  This macro is used to safely loop over (traverse) the entries in a list. It
+  uses a \a for loop, and supplies the enclosed code with a pointer to each list
+  entry as it loops. It is typically used as follows:
+
+  \code
+  static AST_LIST_HEAD(entry_list, list_entry) entries;
+  ...
+  struct list_entry {
+  	...
+  	AST_LIST_ENTRY(list_entry) list;
+  }
+  ...
+  struct list_entry *current;
+  ...
+  AST_LIST_TRAVERSE_SAFE_BEGIN(&entries, current, list) {
+     (do something with current here)
+  }
+  AST_LIST_TRAVERSE_SAFE_END;
+  \endcode
+
+  It differs from AST_LIST_TRAVERSE() in that the code inside the loop can modify
+  (or even free, after calling AST_LIST_REMOVE_CURRENT()) the entry pointed to by
+  the \a current pointer without affecting the loop traversal.
+*/
+#define AST_LIST_TRAVERSE_SAFE_BEGIN(head, var, field) {				\
+	typeof((head)->first) __list_next;						\
+	typeof((head)->first) __list_prev = NULL;					\
+	typeof((head)->first) __new_prev = NULL;					\
+	for ((var) = (head)->first, __new_prev = (var),					\
+	      __list_next = (var) ? (var)->field.next : NULL;				\
+	     (var);									\
+	     __list_prev = __new_prev, (var) = __list_next,				\
+	     __new_prev = (var),							\
+	     __list_next = (var) ? (var)->field.next : NULL				\
+	    )
+
+/*!
+  \brief Removes the \a current entry from a list during a traversal.
+  \param head This is a pointer to the list head structure
+  \param field This is the name of the field (declared using AST_LIST_ENTRY())
+  used to link entries of this list together.
+
+  \note This macro can \b only be used inside an AST_LIST_TRAVERSE_SAFE_BEGIN()
+  block; it is used to unlink the current entry from the list without affecting
+  the list traversal (and without having to re-traverse the list to modify the
+  previous entry, if any).
+ */
+#define AST_LIST_REMOVE_CURRENT(head, field) do {					\
+	__new_prev->field.next = NULL;							\
+	__new_prev = __list_prev;							\
+	if (__list_prev)								\
+		__list_prev->field.next = __list_next;					\
+	else										\
+		(head)->first = __list_next;						\
+	if (!__list_next)								\
+		(head)->last = __list_prev;						\
+	} while (0)
+
+/*!
+  \brief Inserts a list entry before the current entry during a traversal.
+  \param head This is a pointer to the list head structure
+  \param elm This is a pointer to the entry to be inserted.
+  \param field This is the name of the field (declared using AST_LIST_ENTRY())
+  used to link entries of this list together.
+
+  \note This macro can \b only be used inside an AST_LIST_TRAVERSE_SAFE_BEGIN()
+  block.
+ */
+#define AST_LIST_INSERT_BEFORE_CURRENT(head, elm, field) do {		\
+	if (__list_prev) {						\
+		(elm)->field.next = __list_prev->field.next;		\
+		__list_prev->field.next = elm;				\
+	} else {							\
+		(elm)->field.next = (head)->first;			\
+		(head)->first = (elm);					\
+	}								\
+	__new_prev = (elm);						\
+} while (0)
+
+/*!
+  \brief Closes a safe loop traversal block.
+ */
+#define AST_LIST_TRAVERSE_SAFE_END  }
+
+/*!
+  \brief Initializes a list head structure.
+  \param head This is a pointer to the list head structure
+
+  This macro initializes a list head structure by setting the head
+  entry to \a NULL (empty list). There is no embedded lock handling
+  with this macro.
+*/
+#define AST_LIST_HEAD_INIT_NOLOCK(head) {				\
+	(head)->first = NULL;						\
+	(head)->last = NULL;						\
+}
+
+/*!
+  \brief Inserts a list entry after a given entry.
+  \param head This is a pointer to the list head structure
+  \param listelm This is a pointer to the entry after which the new entry should
+  be inserted.
+  \param elm This is a pointer to the entry to be inserted.
+  \param field This is the name of the field (declared using AST_LIST_ENTRY())
+  used to link entries of this list together.
+ */
+#define AST_LIST_INSERT_AFTER(head, listelm, elm, field) do {		\
+	(elm)->field.next = (listelm)->field.next;			\
+	(listelm)->field.next = (elm);					\
+	if ((head)->last == (listelm))					\
+		(head)->last = (elm);					\
+} while (0)
+
+/*!
+  \brief Inserts a list entry at the head of a list.
+  \param head This is a pointer to the list head structure
+  \param elm This is a pointer to the entry to be inserted.
+  \param field This is the name of the field (declared using AST_LIST_ENTRY())
+  used to link entries of this list together.
+ */
+#define AST_LIST_INSERT_HEAD(head, elm, field) do {			\
+		(elm)->field.next = (head)->first;			\
+		(head)->first = (elm);					\
+		if (!(head)->last)					\
+			(head)->last = (elm);				\
+} while (0)
+
+/*!
+  \brief Appends a list entry to the tail of a list.
+  \param head This is a pointer to the list head structure
+  \param elm This is a pointer to the entry to be appended.
+  \param field This is the name of the field (declared using AST_LIST_ENTRY())
+  used to link entries of this list together.
+
+  Note: The link field in the appended entry is \b not modified, so if it is
+  actually the head of a list itself, the entire list will be appended
+  temporarily (until the next AST_LIST_INSERT_TAIL is performed).
+ */
+#define AST_LIST_INSERT_TAIL(head, elm, field) do {			\
+      if (!(head)->first) {						\
+		(head)->first = (elm);					\
+		(head)->last = (elm);					\
+      } else {								\
+		(head)->last->field.next = (elm);			\
+		(head)->last = (elm);					\
+      }									\
+} while (0)
+
+/*!
+  \brief Removes and returns the head entry from a list.
+  \param head This is a pointer to the list head structure
+  \param field This is the name of the field (declared using AST_LIST_ENTRY())
+  used to link entries of this list together.
+
+  Removes the head entry from the list, and returns a pointer to it.
+  This macro is safe to call on an empty list.
+ */
+#define AST_LIST_REMOVE_HEAD(head, field) ({				\
+		typeof((head)->first) cur = (head)->first;		\
+		if (cur) {						\
+			(head)->first = cur->field.next;		\
+			cur->field.next = NULL;				\
+			if ((head)->last == cur)			\
+				(head)->last = NULL;			\
+		}							\
+		cur;							\
+	})
+
+/*!
+  \brief Removes a specific entry from a list.
+  \param head This is a pointer to the list head structure
+  \param elm This is a pointer to the entry to be removed.
+  \param field This is the name of the field (declared using AST_LIST_ENTRY())
+  used to link entries of this list together.
+  \warning The removed entry is \b not freed nor modified in any way.
+ */
+#define AST_LIST_REMOVE(head, elm, field) do {			        \
+	if ((head)->first == (elm)) {					\
+		(head)->first = (elm)->field.next;			\
+		if ((head)->last == (elm))			\
+			(head)->last = NULL;			\
+	} else {								\
+		typeof(elm) curelm = (head)->first;			\
+		while (curelm && (curelm->field.next != (elm)))			\
+			curelm = curelm->field.next;			\
+		if (curelm) { \
+			curelm->field.next = (elm)->field.next;			\
+			if ((head)->last == (elm))				\
+				(head)->last = curelm;				\
+		} \
+	}								\
+        (elm)->field.next = NULL;                                       \
+} while (0)
+
+#endif /* _ASTERISK_LINKEDLISTS_H */

menuselect/make_version

@@ -0,0 +1,56 @@
+#!/bin/sh
+
+if [ -f ${1}/.version ]; then
+	cat ${1}.version
+elif [ -f ${1}/.svnrevision ]; then
+	echo SVN-`cat ${1}/.svnbranch`-r`cat ${1}/.svnrevision`
+elif [ -d .svn ]; then
+    PARTS=`LANG=C svn info ${1} | grep URL | awk '{print $2;}' | sed -e 's:^.*/svn/menuselect/::' | sed -e 's:/: :g'`
+    BRANCH=0
+    TEAM=0
+    
+    REV=`svnversion -c ${1} | cut -d: -f2`
+    
+    if [ "${PARTS}" = "trunk" ]
+	then
+	echo SVN-'trunk'-r${REV}
+	exit 0
+    fi
+    
+    for PART in $PARTS
+      do
+      if [ ${BRANCH} != 0 ]
+	  then
+	  RESULT="${RESULT}-${PART}"
+	  break
+      fi
+      
+      if [ ${TEAM} != 0 ]
+	  then
+	  RESULT="${RESULT}-${PART}"
+	  continue
+      fi
+      
+      if [ "${PART}" = "branches" ]
+	  then
+	  BRANCH=1
+	  RESULT="branch"
+	  continue
+      fi
+      
+      if [ "${PART}" = "tags" ]
+	  then
+	  BRANCH=1
+	  RESULT="tag"
+	  continue
+      fi
+      
+      if [ "${PART}" = "team" ]
+	  then
+	  TEAM=1
+	  continue
+      fi
+    done
+    
+    echo SVN-${RESULT##-}-r${REV}
+fi

menuselect/makeopts.in

@@ -0,0 +1,22 @@
+# NOTE: Names of _INCLUDE and _LIB entries in this file must be
+#       the exact uppercase equivalents of the names used for
+#       dependencies in menuselect for the same package.
+
+CC=@CC@
+
+OSARCH=@HOST_OS@
+MENUSELECT_DEBUG=@MENUSELECT_DEBUG@
+
+# The frontend can use curses, ncurses, newt or gtk2
+
+CURSES_INCLUDE=@CURSES_INCLUDE@
+CURSES_LIB=@CURSES_LIB@
+
+GTK2_INCLUDE=@GTK2_INCLUDE@
+GTK2_LIB=@GTK2_LIB@
+
+NCURSES_INCLUDE=@NCURSES_INCLUDE@
+NCURSES_LIB=@NCURSES_LIB@
+
+NEWT_INCLUDE=@NEWT_INCLUDE@
+NEWT_LIB=@NEWT_LIB@

menuselect/menuselect.h

@@ -0,0 +1,157 @@
+/*
+ * Asterisk -- An open source telephony toolkit.
+ *
+ * Copyright (C) 2005-2006, Russell Bryant
+ *
+ * Russell Bryant <russell@digium.com>
+ *
+ * See http://www.asterisk.org for more information about
+ * the Asterisk project. Please do not directly contact
+ * any of the maintainers of this project for assistance;
+ * the project provides a web site, mailing lists and IRC
+ * channels for your use.
+ *
+ * This program is free software, distributed under the terms of
+ * the GNU General Public License Version 2. See the LICENSE file
+ * at the top of the source tree.
+ */
+
+/*!
+ * \file
+ *
+ * \brief public data structures and defaults for menuselect
+ *
+ */
+
+#ifndef MENUSELECT_H
+#define MENUSELECT_H
+
+#include "linkedlists.h"
+
+#define OUTPUT_MAKEOPTS_DEFAULT "menuselect.makeopts"
+#define OUTPUT_MAKEDEPS_DEFAULT "menuselect.makedeps"
+#define MENUSELECT_DEPS         "build_tools/menuselect-deps"
+
+struct member;
+
+struct reference {
+	/*! the name of the dependency */
+	const char *name;
+	/*! the display name of the dependency */
+	const char *displayname;
+	/*! if this dependency is a member, not an external object */
+	struct member *member;
+	/*! if this package was found */
+	unsigned char met:1;
+	/*! for linking */
+	AST_LIST_ENTRY(reference) list;
+};
+
+enum failure_types {
+	NO_FAILURE = 0,
+	SOFT_FAILURE = 1,
+	HARD_FAILURE = 2,
+};
+
+struct member {
+	/*! What will be sent to the makeopts file */
+	const char *name;
+	/*! Display name if known */
+	const char *displayname;
+	/*! Default setting */
+	const char *defaultenabled;
+	/*! Delete these file(s) if this member changes */
+	const char *remove_on_change;
+	/*! Touch these file(s) if this member changes */
+	const char *touch_on_change;
+	const char *support_level;
+	const char *replacement;
+	/*! This module is currently selected */
+	unsigned int enabled:1;
+	/*! This module was enabled when the config was loaded */
+	unsigned int was_enabled:1;
+	/*! This module has failed dependencies */
+	unsigned int depsfailed:2;
+	/*! This module has failed conflicts */
+	unsigned int conflictsfailed:2;
+	/*! This module's 'enabled' flag was changed by a default only */
+	unsigned int was_defaulted:1;
+	/*! This module is a dependency, and if it is selected then
+	  we have included it in the MENUSELECT_BUILD_DEPS line
+	  in the output file */
+	unsigned int build_deps_output:1;
+	/*! This module should never be enabled automatically, but only
+	 * when explicitly set. */
+	unsigned int explicitly_enabled_only:1;
+	/*! This isn't actually a module!  It's a separator, and it should
+	 * be passed over for many of the usual purposes associated with members. */
+	unsigned int is_separator:1;
+	/*! dependencies of this module */
+	AST_LIST_HEAD_NOLOCK(, reference) deps;
+	/*! conflicts of this module */
+	AST_LIST_HEAD_NOLOCK(, reference) conflicts;
+	/*! optional packages used by this module */
+	AST_LIST_HEAD_NOLOCK(, reference) uses;
+	/*! for making a list of modules */
+	AST_LIST_ENTRY(member) list;
+};
+
+enum support_level_values {
+	SUPPORT_CORE = 0,
+	SUPPORT_EXTENDED = 1,
+	SUPPORT_DEPRECATED = 2,
+	SUPPORT_UNSPECIFIED = 3,
+	SUPPORT_COUNT = 4, /* Keep this item at the end of the list. Tracks total number of support levels. */
+};
+
+struct category {
+	struct member *separators[SUPPORT_COUNT];
+	/*! the Makefile variable */
+	const char *name;
+	/*! the name displayed in the menu */
+	const char *displayname;
+	/*! Delete these file(s) if anything in this category changes */
+	const char *remove_on_change;
+	/*! Touch these file(s) if anything in this category changes */
+	const char *touch_on_change;
+	/*! Output what is selected, as opposed to not selected */
+	unsigned int positive_output:1;
+	/*! All choices in this category are mutually exclusive */
+	unsigned int exclusive:1;
+	/*! the list of possible values to be set in this variable */
+	AST_LIST_HEAD_NOLOCK(, member) members;
+	/*! for linking */
+	AST_LIST_ENTRY(category) list;
+};
+
+extern AST_LIST_HEAD_NOLOCK(categories, category) categories;
+
+extern const char *menu_name;
+
+/*! This is implemented by the frontend */
+int run_menu(void);
+
+int count_categories(void);
+
+int count_members(struct category *cat);
+
+/*! \brief Toggle a member of a category at the specified index to enabled/disabled */
+void toggle_enabled_index(struct category *cat, int index);
+
+void toggle_enabled(struct member *mem);
+
+/*! \brief Set a member of a category at the specified index to enabled */
+void set_enabled(struct category *cat, int index);
+/*! \brief Set a member of a category at the specified index to not enabled */
+void clear_enabled(struct category *cat, int index);
+
+/*! \brief Enable/Disable all members of a category as long as dependencies have been met and no conflicts are found */
+void set_all(struct category *cat, int val);
+
+/*! \brief returns non-zero if the string is not defined, or has zero length */
+static inline int strlen_zero(const char *s)
+{
+	return (!s || (*s == '\0'));
+}
+
+#endif /* MENUSELECT_H */

menuselect/menuselect_gtk.c

@@ -0,0 +1,358 @@
+#include <stdlib.h>
+#include <stdio.h>
+#include <string.h>
+#include <gtk/gtk.h>
+
+#include "menuselect.h"
+
+enum {
+	/*! The row name */
+	COLUMN_NAME,
+	/*! Whether this row is enabled */
+	COLUMN_SELECTED,
+	/*! Dependencies */
+	COLUMN_DEPS,
+	/*! Optional dependencies */
+	COLUMN_USES,
+	/*! Conflicts */
+	COLUMN_CNFS,
+	/*! Number of columns, must be the last element in the enum */
+	NUM_COLUMNS,
+};
+
+static void handle_save(GtkWidget *w, gpointer data);
+static void handle_about(GtkWidget *w, gpointer data);
+static void handle_quit(GtkWidget *w, gpointer data);
+
+static GtkItemFactoryEntry menu_items[] = {
+  { "/_File",               NULL,         NULL,           0, "<Branch>" },
+  { "/File/_Save And Quit", "<control>S", handle_save, 0, "<StockItem>", GTK_STOCK_SAVE },
+  { "/File/sep1",           NULL,         NULL,           0, "<Separator>" },
+  { "/File/_Quit",          "<CTRL>Q",    handle_quit,  0, "<StockItem>", GTK_STOCK_QUIT },
+  { "/_Help",               NULL,         NULL,           0, "<LastBranch>" },
+  { "/_Help/About",         NULL,         handle_about,   0, "<Item>" },
+};
+
+static gint nmenu_items = sizeof(menu_items) / sizeof(menu_items[0]);
+
+static GtkTreeView *tree;
+static GtkWidget *window;
+
+/* 0, save ... non-zero, don't save */
+static int main_res = 1;
+static int change_made = 0;
+
+static void handle_save(GtkWidget *w, gpointer data)
+{
+	main_res = 0;
+	gtk_main_quit();
+}
+
+static void handle_about(GtkWidget *w, gpointer data)
+{
+	GtkWidget *dialog;
+
+	dialog = gtk_message_dialog_new(GTK_WINDOW(window), GTK_DIALOG_MODAL,
+				GTK_MESSAGE_INFO, GTK_BUTTONS_OK,
+				"GMenuselect - http://www.asterisk.org/\n"
+				"Russell Bryant <russell@digium.com>\n"
+				"Copyright (C) 2007\n");
+
+	gtk_dialog_run(GTK_DIALOG(dialog));
+	gtk_widget_destroy(dialog);
+}
+
+static gboolean delete_event(GtkWidget *widget, GdkEvent *event, gpointer data)
+{
+	return FALSE;
+}
+
+static void handle_quit(GtkWidget *widget, gpointer data)
+{
+	gtk_main_quit();
+}
+
+static void destroy(GtkWidget *widget, gpointer data)
+{
+	GtkWidget *dialog;
+	gint response;
+
+	if (!main_res || !change_made) {
+		gtk_main_quit();
+		return;
+	}
+
+	dialog = gtk_message_dialog_new(GTK_WINDOW(window), GTK_DIALOG_MODAL,
+			GTK_MESSAGE_QUESTION, GTK_BUTTONS_YES_NO, "Save before quit?");
+	response = gtk_dialog_run(GTK_DIALOG(dialog));
+	gtk_widget_destroy(dialog);
+
+	if (response == GTK_RESPONSE_YES)
+		main_res = 0;
+
+	gtk_main_quit();
+}
+
+static void toggled_handler(GtkCellRendererToggle *renderer, gchar *path, gpointer data)
+{
+	gchar *cat_num_str, *mem_num_str;
+	int cat_num, mem_num;
+	int i = 0;
+	struct category *cat;
+	struct member *mem;
+	GtkTreeStore *store = data;
+	GtkTreeModel *model;
+	GtkTreeIter cat_iter, mem_iter;
+
+	mem_num_str = alloca(strlen(path)) + 1;
+	strcpy(mem_num_str, path);
+	cat_num_str = strsep(&mem_num_str, ":");
+
+	if (!mem_num_str || !*mem_num_str)
+		return;
+
+	cat_num = atoi(cat_num_str);
+	mem_num = atoi(mem_num_str);
+
+	AST_LIST_TRAVERSE(&categories, cat, list) {
+		if (i == cat_num)
+			break;
+		i++;
+	}
+	if (!cat)
+		return;
+
+	i = 0;
+	AST_LIST_TRAVERSE(&cat->members, mem, list) {
+		if (i == mem_num)
+			break;
+		i++;
+	}
+	if (!mem)
+		return;
+
+	toggle_enabled(mem);
+
+	model = gtk_tree_view_get_model(tree);
+
+	gtk_tree_model_get_iter_first(model, &cat_iter);
+	for (i = 0; i < cat_num; i++) {
+		if (!gtk_tree_model_iter_next(model, &cat_iter))
+			break;
+	}
+	if (i != cat_num)
+		return;
+
+	if (!gtk_tree_model_iter_children(model, &mem_iter, &cat_iter))
+		return;
+
+	for (i = 0; i < mem_num; i++) {
+		if (!gtk_tree_model_iter_next(model, &mem_iter))
+			break;
+	}
+	if (i != mem_num)
+		return;
+
+	gtk_tree_store_set(store, &mem_iter, COLUMN_SELECTED, mem->enabled, -1);
+
+	change_made = 1;
+}
+
+static void row_activated_handler(GtkTreeView *treeview, GtkTreePath *path,
+	GtkTreeViewColumn *col, gpointer data)
+{
+	GtkTreeIter iter;
+	GtkTreeModel *model;
+	GtkTreeStore *store = data;
+	gchar *name;
+	struct category *cat;
+	struct member *mem;
+
+	model = gtk_tree_view_get_model(treeview);
+
+	if (!gtk_tree_model_get_iter(model, &iter, path))
+		return;
+
+	gtk_tree_model_get(model, &iter, COLUMN_NAME, &name, -1);
+
+	AST_LIST_TRAVERSE(&categories, cat, list) {
+		AST_LIST_TRAVERSE(&cat->members, mem, list) {
+			if (strcmp(name, mem->name))
+				continue;
+
+			toggle_enabled(mem);
+			gtk_tree_store_set(store, &iter, COLUMN_SELECTED, mem->enabled, -1);
+			change_made = 1;
+			break;
+		}
+		if (mem)
+			break;
+	}
+
+	g_free(name);
+}
+
+static GtkWidget *get_menubar_menu(GtkWidget *window)
+{
+	GtkItemFactory *item_factory;
+	GtkAccelGroup *accel_group;
+
+	/* Make an accelerator group (shortcut keys) */
+	accel_group = gtk_accel_group_new();
+
+	/* Make an ItemFactory (that makes a menubar) */
+	item_factory = gtk_item_factory_new(GTK_TYPE_MENU_BAR, "<main>",
+					accel_group);
+
+	/* This function generates the menu items. Pass the item factory,
+	   the number of items in the array, the array itself, and any
+	   callback data for the the menu items. */
+	gtk_item_factory_create_items(item_factory, nmenu_items, menu_items, NULL);
+
+	/* Attach the new accelerator group to the window. */
+	gtk_window_add_accel_group(GTK_WINDOW(window), accel_group);
+
+	/* Finally, return the actual menu bar created by the item factory. */
+	return gtk_item_factory_get_widget(item_factory, "<main>");
+}
+
+int run_menu(void)
+{
+	int argc = 0;
+	char **argv = NULL;
+	GtkWidget *s_window;
+	GtkCellRenderer *renderer;
+	GtkTreeViewColumn *column;
+	GtkTreeStore *store;
+	struct category *cat;
+	struct member *mem;
+	GtkWidget *main_vbox;
+	GtkWidget *menubar;
+
+	gtk_init(&argc, &argv);
+   
+   	window = gtk_window_new(GTK_WINDOW_TOPLEVEL);
+	gtk_widget_set_size_request(window, 640, 480);
+	gtk_window_set_title(GTK_WINDOW(window), "GMenuselect");
+
+	main_vbox = gtk_vbox_new(FALSE, 1);
+	gtk_container_set_border_width(GTK_CONTAINER(main_vbox), 1); 
+	gtk_container_add(GTK_CONTAINER(window), main_vbox);
+
+	menubar = get_menubar_menu(window);
+	gtk_box_pack_start(GTK_BOX(main_vbox), menubar, FALSE, FALSE, 0);
+
+	s_window = gtk_scrolled_window_new(NULL, NULL);
+
+	g_signal_connect(G_OBJECT(window), "delete_event",
+	                 G_CALLBACK(delete_event), NULL);
+	g_signal_connect(G_OBJECT(window), "destroy",
+	                 G_CALLBACK(destroy), NULL);
+
+	store = gtk_tree_store_new(NUM_COLUMNS,
+		G_TYPE_STRING,   /* COLUMN_NAME */
+		G_TYPE_BOOLEAN,  /* COLUMN_SELECTED */
+		G_TYPE_STRING,   /* COLUMN_DEPS */
+		G_TYPE_STRING,   /* COLUMN_USES */
+		G_TYPE_STRING);  /* COLUMN_CNFS */
+
+	AST_LIST_TRAVERSE(&categories, cat, list) {
+		GtkTreeIter iter, iter2;
+		gtk_tree_store_append(store, &iter, NULL);
+		gtk_tree_store_set(store, &iter,
+			COLUMN_NAME, cat->displayname,
+			COLUMN_SELECTED, TRUE,
+			-1);
+		AST_LIST_TRAVERSE(&cat->members, mem, list) {
+			char name_buf[64];
+			char dep_buf[64] = "";
+			char use_buf[64] = "";
+			char cnf_buf[64] = "";
+			struct reference *dep;
+			struct reference *use;
+			struct reference *cnf;
+
+			AST_LIST_TRAVERSE(&mem->deps, dep, list) {
+				strncat(dep_buf, dep->displayname, sizeof(dep_buf) - strlen(dep_buf) - 1);
+				strncat(dep_buf, dep->member ? "(M)" : "(E)", sizeof(dep_buf) - strlen(dep_buf) - 1);
+				if (AST_LIST_NEXT(dep, list))
+					strncat(dep_buf, ", ", sizeof(dep_buf) - strlen(dep_buf) - 1);
+			}
+			AST_LIST_TRAVERSE(&mem->uses, use, list) {
+				strncat(use_buf, use->displayname, sizeof(use_buf) - strlen(use_buf) - 1);
+				if (AST_LIST_NEXT(use, list))
+					strncat(use_buf, ", ", sizeof(use_buf) - strlen(use_buf) - 1);
+			}
+			AST_LIST_TRAVERSE(&mem->conflicts, cnf, list) {
+				strncat(cnf_buf, cnf->displayname, sizeof(cnf_buf) - strlen(cnf_buf) - 1);
+				strncat(cnf_buf, cnf->member ? "(M)" : "(E)", sizeof(cnf_buf) - strlen(cnf_buf) - 1);
+				if (AST_LIST_NEXT(cnf, list))
+					strncat(cnf_buf, ", ", sizeof(cnf_buf) - strlen(cnf_buf) - 1);
+			}
+
+			if (mem->is_separator) {
+				snprintf(name_buf, sizeof(name_buf), "--- %s ---", mem->name);
+			} else {
+				snprintf(name_buf, sizeof(name_buf), "%s", mem->name);
+			}
+			if (mem->depsfailed == HARD_FAILURE)
+				strncat(name_buf, " (Failed Deps.)", sizeof(name_buf) - strlen(name_buf) - 1);
+			if (mem->conflictsfailed == HARD_FAILURE)
+				strncat(name_buf, " (In Conflict)", sizeof(name_buf) - strlen(name_buf) - 1);
+
+			gtk_tree_store_append(store, &iter2, &iter);
+			gtk_tree_store_set(store, &iter2,
+				COLUMN_NAME, name_buf,
+				COLUMN_SELECTED, mem->enabled,
+				COLUMN_DEPS, dep_buf,
+				COLUMN_USES, use_buf,
+				COLUMN_CNFS, cnf_buf,
+				-1);
+		}
+	}
+
+	tree = (GtkTreeView *) gtk_tree_view_new_with_model(GTK_TREE_MODEL(store));
+
+#if GTK_CHECK_VERSION(2,10,0)
+	gtk_tree_view_set_enable_tree_lines(tree, TRUE);
+	gtk_tree_view_set_grid_lines(tree, GTK_TREE_VIEW_GRID_LINES_BOTH);
+#endif
+
+	renderer = gtk_cell_renderer_text_new();
+	column = gtk_tree_view_column_new_with_attributes("Name",
+				renderer, "text", COLUMN_NAME, NULL);
+	gtk_tree_view_append_column(GTK_TREE_VIEW(tree), column);
+
+	renderer = gtk_cell_renderer_toggle_new();
+	column = gtk_tree_view_column_new_with_attributes("Selected",
+				renderer, "active", COLUMN_SELECTED, NULL);
+	gtk_tree_view_append_column(GTK_TREE_VIEW(tree), column);
+	g_signal_connect(renderer, "toggled", (GCallback) toggled_handler, store);
+
+	renderer = gtk_cell_renderer_text_new();
+	column = gtk_tree_view_column_new_with_attributes("Depends On",
+				renderer, "text", COLUMN_DEPS, NULL);
+	gtk_tree_view_append_column(GTK_TREE_VIEW(tree), column);
+
+	renderer = gtk_cell_renderer_text_new();
+	column = gtk_tree_view_column_new_with_attributes("Can Use",
+				renderer, "text", COLUMN_USES, NULL);
+	gtk_tree_view_append_column(GTK_TREE_VIEW(tree), column);
+
+	renderer = gtk_cell_renderer_text_new();
+	column = gtk_tree_view_column_new_with_attributes("Conflicts With",
+				renderer, "text", COLUMN_CNFS, NULL);
+	gtk_tree_view_append_column(GTK_TREE_VIEW(tree), column);
+	
+	g_signal_connect(tree, "row-activated", (GCallback) row_activated_handler, store);
+
+	gtk_container_add(GTK_CONTAINER(s_window), GTK_WIDGET(tree));
+
+	gtk_box_pack_end(GTK_BOX(main_vbox), s_window, TRUE, TRUE, 0);
+
+	gtk_widget_show_all(window);
+   
+	gtk_main();
+
+	return main_res;
+}

menuselect/menuselect_newt.c

@@ -0,0 +1,427 @@
+/*
+ * Asterisk -- An open source telephony toolkit.
+ *
+ * Copyright (C) 2008 Sean Bright
+ *
+ * Sean Bright <sean.bright@gmail.com>
+ *
+ * See http://www.asterisk.org for more information about
+ * the Asterisk project. Please do not directly contact
+ * any of the maintainers of this project for assistance;
+ * the project provides a web site, mailing lists and IRC
+ * channels for your use.
+ *
+ * This program is free software, distributed under the terms of
+ * the GNU General Public License Version 2. See the LICENSE file
+ * at the top of the source tree.
+ */
+
+/*
+ * \file
+ *
+ * \author Sean Bright <sean.bright@gmail.com>
+ *
+ * \brief newt frontend for selection maintenance
+ */
+
+#include <stdlib.h>
+#include <stdio.h>
+#include <string.h>
+#include <newt.h>
+
+#include "menuselect.h"
+
+#define MIN_X 80
+#define MIN_Y 21
+
+#define MIN(a, b) ({ typeof(a) __a = (a); typeof(b) __b = (b); ((__a > __b) ? __b : __a);})
+#define MAX(a, b) ({ typeof(a) __a = (a); typeof(b) __b = (b); ((__a < __b) ? __b : __a);})
+
+extern int changes_made;
+
+static newtComponent rootOptions;
+static newtComponent subOptions;
+
+static newtComponent memberNameTextbox;
+static newtComponent dependsLabel;
+static newtComponent usesLabel;
+static newtComponent conflictsLabel;
+static newtComponent supportLevelLabel;
+static newtComponent dependsDataTextbox;
+static newtComponent usesDataTextbox;
+static newtComponent conflictsDataTextbox;
+static newtComponent supportLevelDataTextbox;
+
+static newtComponent exitButton;
+static newtComponent saveAndExitButton;
+
+static void build_members_menu(int overlay);
+static void root_menu_callback(newtComponent component, void *data);
+
+static void toggle_all_options(int select)
+{
+	struct category *cat = newtListboxGetCurrent(rootOptions);
+
+	set_all(cat, select);
+
+	/* Redraw */
+	build_members_menu(1);
+
+	return;
+}
+
+static void toggle_selected_option()
+{
+	int i;
+	struct member *mem = newtListboxGetCurrent(subOptions);
+
+	toggle_enabled(mem);
+
+	/* Redraw */
+	build_members_menu(1);
+
+	/* Select the next item in the list */
+	for (i = 0; i < newtListboxItemCount(subOptions); i++) {
+		struct member *cur;
+
+		newtListboxGetEntry(subOptions, i, NULL, (void **) &cur);
+
+		if (cur == mem) {
+			i = MIN(i + 1, newtListboxItemCount(subOptions) - 1);
+			break;
+		}
+	}
+
+	newtListboxSetCurrent(subOptions, i);
+
+	return;
+}
+
+static void reset_display()
+{
+	newtTextboxSetText(memberNameTextbox, "");
+	newtTextboxSetText(dependsDataTextbox, "");
+	newtTextboxSetText(usesDataTextbox, "");
+	newtTextboxSetText(conflictsDataTextbox, "");
+	newtTextboxSetText(supportLevelDataTextbox, "");
+	newtRefresh();
+}
+
+static void display_member_info(struct member *mem)
+{
+	char buffer[128] = { 0 };
+
+	struct reference *dep;
+	struct reference *con;
+	struct reference *uses;
+
+	reset_display();
+
+	if (mem->displayname) {
+		newtTextboxSetText(memberNameTextbox, mem->displayname);
+	}
+
+	if (AST_LIST_EMPTY(&mem->deps)) {
+		if (mem->is_separator) {
+			newtTextboxSetText(dependsDataTextbox, "");
+		} else {
+			newtTextboxSetText(dependsDataTextbox, "N/A");
+		}
+	} else {
+		strcpy(buffer, "");
+		AST_LIST_TRAVERSE(&mem->deps, dep, list) {
+			strncat(buffer, dep->displayname, sizeof(buffer) - strlen(buffer) - 1);
+			strncat(buffer, dep->member ? "(M)" : "(E)", sizeof(buffer) - strlen(buffer) - 1);
+			if (AST_LIST_NEXT(dep, list))
+				strncat(buffer, ", ", sizeof(buffer) - strlen(buffer) - 1);
+		}
+		newtTextboxSetText(dependsDataTextbox, buffer);
+	}
+
+	if (AST_LIST_EMPTY(&mem->uses)) {
+		if (mem->is_separator) {
+			newtTextboxSetText(usesDataTextbox, "");
+		} else {
+			newtTextboxSetText(usesDataTextbox, "N/A");
+		}
+	} else {
+		strcpy(buffer, "");
+		AST_LIST_TRAVERSE(&mem->uses, uses, list) {
+			strncat(buffer, uses->displayname, sizeof(buffer) - strlen(buffer) - 1);
+			strncat(buffer, uses->member ? "(M)" : "(E)", sizeof(buffer) - strlen(buffer) - 1);
+			if (AST_LIST_NEXT(uses, list))
+				strncat(buffer, ", ", sizeof(buffer) - strlen(buffer) - 1);
+		}
+		newtTextboxSetText(usesDataTextbox, buffer);
+	}
+
+	if (AST_LIST_EMPTY(&mem->conflicts)) {
+		if (!mem->is_separator) {
+			newtTextboxSetText(conflictsDataTextbox, "N/A");
+		} else {
+			newtTextboxSetText(conflictsDataTextbox, "");
+		}
+	} else {
+		strcpy(buffer, "");
+		AST_LIST_TRAVERSE(&mem->conflicts, con, list) {
+			strncat(buffer, con->displayname, sizeof(buffer) - strlen(buffer) - 1);
+			strncat(buffer, con->member ? "(M)" : "(E)", sizeof(buffer) - strlen(buffer) - 1);
+			if (AST_LIST_NEXT(con, list))
+				strncat(buffer, ", ", sizeof(buffer) - strlen(buffer) - 1);
+		}
+		newtTextboxSetText(conflictsDataTextbox, buffer);
+	}
+
+	{ /* Support Level */
+		snprintf(buffer, sizeof(buffer), "%s", mem->support_level);
+		if (mem->replacement && *mem->replacement) {
+			char buf2[64];
+			snprintf(buf2, sizeof(buf2), ", Replaced by: %s", mem->replacement);
+			strncat(buffer, buf2, sizeof(buffer) - strlen(buffer) - 1);
+		}
+		if (mem->is_separator) {
+			newtTextboxSetText(supportLevelDataTextbox, "");
+		} else {
+			newtTextboxSetText(supportLevelDataTextbox, buffer);
+		}
+	}
+}
+
+static void build_members_menu(int overlay)
+{
+	struct category *cat;
+	struct member *mem;
+	char buf[64];
+	int i = 0;
+
+	if (!overlay) {
+		reset_display();
+		newtListboxClear(subOptions);
+	}
+
+	cat = newtListboxGetCurrent(rootOptions);
+
+	AST_LIST_TRAVERSE(&cat->members, mem, list) {
+
+		if ((mem->depsfailed == HARD_FAILURE) || (mem->conflictsfailed == HARD_FAILURE)) {
+			snprintf(buf, sizeof(buf), "XXX %s", mem->name);
+		} else if (mem->is_separator) {
+			snprintf(buf, sizeof(buf), "    --- %s ---", mem->name);
+		} else if (mem->depsfailed == SOFT_FAILURE) {
+			snprintf(buf, sizeof(buf), "<%s> %s", mem->enabled ? "*" : " ", mem->name);
+		} else if (mem->conflictsfailed == SOFT_FAILURE) {
+			snprintf(buf, sizeof(buf), "(%s) %s", mem->enabled ? "*" : " ", mem->name);
+		} else {
+			snprintf(buf, sizeof(buf), "[%s] %s", mem->enabled ? "*" : " ", mem->name);
+		}
+
+		if (overlay) {
+			newtListboxSetEntry(subOptions, i, buf);
+		} else {
+			newtListboxAppendEntry(subOptions, buf, mem);
+		}
+
+		i++;
+	}
+
+	if (!overlay) {
+		display_member_info(AST_LIST_FIRST(&cat->members));
+	}
+
+	return;
+}
+
+static void build_main_menu()
+{
+	struct category *cat;
+	char buf[64];
+	int i = 1;
+
+	newtListboxClear(rootOptions);
+
+	AST_LIST_TRAVERSE(&categories, cat, list) {
+		if (!strlen_zero(cat->displayname))
+			snprintf(buf, sizeof(buf), " %s ", cat->displayname);
+		else
+			snprintf(buf, sizeof(buf), " %s ", cat->name);
+
+		newtListboxAppendEntry(rootOptions, buf, cat);
+
+		i++;
+	}
+}
+
+static void category_menu_callback(newtComponent component, void *data)
+{
+	display_member_info(newtListboxGetCurrent(subOptions));
+}
+
+static void root_menu_callback(newtComponent component, void *data)
+{
+	build_members_menu(0);
+}
+
+int run_confirmation_dialog(int *result)
+{
+	int res = newtWinTernary("Are You Sure?", "Discard changes & Exit", "Save & Exit", "Cancel",
+				   "It appears you have made some changes, and you have opted to Quit "
+				   "without saving these changes.  Please choose \"Discard changes & Exit\" to exit "
+				   "without saving; Choose \"Cancel\" to cancel your decision to quit, and keep "
+				   "working in menuselect, or choose \"Save & Exit\" to save your changes, and exit.");
+
+	switch (res) {
+	case 1:
+		/* Discard and exit */
+		*result = -1;
+		return 1;
+	case 2:
+		/* Save and exit */
+		*result = 0;
+		return 1;
+	case 3:
+		/* They either chose "No" or they hit F12 */
+	default:
+		*result = -1;
+		return 0;
+	}
+}
+
+int run_menu(void)
+{
+	struct newtExitStruct es;
+	newtComponent form;
+	int x = 0, y = 0, res = 0;
+
+	newtInit();
+	newtCls();
+	newtGetScreenSize(&x, &y);
+
+	if (x < MIN_X || y < MIN_Y) {
+		newtFinished();
+		fprintf(stderr, "Terminal must be at least %d x %d.\n", MIN_X, MIN_Y);
+		return -1;
+	}
+
+	newtPushHelpLine("  <ENTER> toggles selection | <F12> saves & exits | <ESC> exits without save");
+	newtRefresh();
+
+	newtCenteredWindow(x - 8, y - 7, menu_name);
+	form = newtForm(NULL, NULL, 0);
+
+	/* F8 for select all */
+	newtFormAddHotKey(form, NEWT_KEY_F8);
+
+	/* F7 for deselect all */
+	newtFormAddHotKey(form, NEWT_KEY_F7);
+
+	newtFormSetTimer(form, 200);
+
+	rootOptions = newtListbox(2, 1, y - 15, 0);
+	newtListboxSetWidth(rootOptions, 34);
+	newtFormAddComponent(form, rootOptions);
+	newtComponentAddCallback(rootOptions, root_menu_callback, NULL);
+
+	subOptions = newtListbox(38, 1, y - 15, NEWT_FLAG_SCROLL | NEWT_FLAG_RETURNEXIT);
+	newtListboxSetWidth(subOptions, x - 47);
+	newtFormAddComponent(form, subOptions);
+	newtComponentAddCallback(subOptions, category_menu_callback, NULL);
+
+	memberNameTextbox       = newtTextbox(2, y - 13, x - 10, 1, 0);
+	dependsLabel            = newtLabel(2, y - 11, "    Depends on:");
+	usesLabel               = newtLabel(2, y - 10, "       Can use:");
+	conflictsLabel          = newtLabel(2, y - 9,  "Conflicts with:");
+	supportLevelLabel       = newtLabel(2, y - 8,  " Support Level:");
+	dependsDataTextbox      = newtTextbox(18, y - 11, x - 27, 1, 0);
+	usesDataTextbox         = newtTextbox(18, y - 10, x - 27, 1, 0);
+	conflictsDataTextbox    = newtTextbox(18, y - 9, x - 27, 1, 0);
+	supportLevelDataTextbox = newtTextbox(18, y - 8, x - 27, 1, 0);
+
+	exitButton = newtButton(x - 23, y - 11, "  Exit  ");
+	saveAndExitButton = newtButton(x - 43, y - 11, " Save & Exit ");
+
+	newtFormAddComponents(
+		form,
+		memberNameTextbox,
+		dependsLabel,
+		dependsDataTextbox,
+		usesLabel,
+		usesDataTextbox,
+		conflictsLabel,
+		conflictsDataTextbox,
+		supportLevelLabel,
+		supportLevelDataTextbox,
+		saveAndExitButton,
+		exitButton,
+		NULL);
+
+	build_main_menu();
+
+	root_menu_callback(rootOptions, AST_LIST_FIRST(&categories));
+
+	for (;;) {
+		do {
+			newtFormRun(form, &es);
+		} while (es.reason == NEWT_EXIT_TIMER);
+
+		if (es.reason == NEWT_EXIT_HOTKEY) {
+			int done = 1;
+
+			switch (es.u.key) {
+			case NEWT_KEY_F12:
+				res = 0;
+				break;
+			case NEWT_KEY_F7:
+				toggle_all_options(0);
+				done = 0;
+				break;
+			case NEWT_KEY_F8:
+				toggle_all_options(1);
+				done = 0;
+				break;
+			case NEWT_KEY_ESCAPE:
+				if (changes_made) {
+					done = run_confirmation_dialog(&res);
+				} else {
+					res = -1;
+				}
+				break;
+			default:
+				done = 0;
+				break;
+			}
+
+			if (done) {
+				break;
+			}
+		} else if (es.reason == NEWT_EXIT_COMPONENT) {
+			if (es.u.co == saveAndExitButton) {
+				res = 0;
+				break;
+			} else if (es.u.co == exitButton) {
+				int done = 1;
+
+				if (changes_made) {
+					done = run_confirmation_dialog(&res);
+				} else {
+					res = -1;
+				}
+
+				if (done) {
+					break;
+				}
+			} else if (es.u.co == subOptions) {
+				toggle_selected_option();
+			}
+		}
+	}
+
+	/* Cleanup */
+	reset_display();
+	newtFormDestroy(form);
+	newtPopWindow();
+	newtPopHelpLine();
+	newtCls();
+	newtFinished();
+
+	return res;
+}

menuselect/menuselect_stub.c

@@ -0,0 +1,39 @@
+/*
+ * Asterisk -- An open source telephony toolkit.
+ *
+ * Copyright (C) 2005 - 2006, Russell Bryant
+ *
+ * Russell Bryant <russell@digium.com>
+ *
+ * See http://www.asterisk.org for more information about
+ * the Asterisk project. Please do not directly contact
+ * any of the maintainers of this project for assistance;
+ * the project provides a web site, mailing lists and IRC
+ * channels for your use.
+ *
+ * This program is free software, distributed under the terms of
+ * the GNU General Public License Version 2. See the LICENSE file
+ * at the top of the source tree.
+ */
+
+/*
+ * \file
+ *
+ * \author Russell Bryant <russell@digium.com>
+ * 
+ * \brief Menu stub
+ */
+
+#include <stdlib.h>
+#include <stdio.h>
+
+#include "menuselect.h"
+
+int run_menu(void)
+{
+	fprintf(stderr, "**************************************************\n");
+	fprintf(stderr, "*** Install ncurses to use the menu interface! ***\n");
+	fprintf(stderr, "**************************************************\n");
+
+	return -1;
+}

menuselect/missing

@@ -0,0 +1,360 @@
+#! /bin/sh
+# Common stub for a few missing GNU programs while installing.
+
+scriptversion=2005-06-08.21
+
+# Copyright (C) 1996, 1997, 1999, 2000, 2002, 2003, 2004, 2005
+#   Free Software Foundation, Inc.
+# Originally by Fran,cois Pinard <pinard@iro.umontreal.ca>, 1996.
+
+# This program is free software; you can redistribute it and/or modify
+# it under the terms of the GNU General Public License as published by
+# the Free Software Foundation; either version 2, or (at your option)
+# any later version.
+
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+# GNU General Public License for more details.
+
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA
+# 02110-1301, USA.
+
+# As a special exception to the GNU General Public License, if you
+# distribute this file as part of a program that contains a
+# configuration script generated by Autoconf, you may include it under
+# the same distribution terms that you use for the rest of that program.
+
+if test $# -eq 0; then
+  echo 1>&2 "Try \`$0 --help' for more information"
+  exit 1
+fi
+
+run=:
+
+# In the cases where this matters, `missing' is being run in the
+# srcdir already.
+if test -f configure.ac; then
+  configure_ac=configure.ac
+else
+  configure_ac=configure.in
+fi
+
+msg="missing on your system"
+
+case "$1" in
+--run)
+  # Try to run requested program, and just exit if it succeeds.
+  run=
+  shift
+  "$@" && exit 0
+  # Exit code 63 means version mismatch.  This often happens
+  # when the user try to use an ancient version of a tool on
+  # a file that requires a minimum version.  In this case we
+  # we should proceed has if the program had been absent, or
+  # if --run hadn't been passed.
+  if test $? = 63; then
+    run=:
+    msg="probably too old"
+  fi
+  ;;
+
+  -h|--h|--he|--hel|--help)
+    echo "\
+$0 [OPTION]... PROGRAM [ARGUMENT]...
+
+Handle \`PROGRAM [ARGUMENT]...' for when PROGRAM is missing, or return an
+error status if there is no known handling for PROGRAM.
+
+Options:
+  -h, --help      display this help and exit
+  -v, --version   output version information and exit
+  --run           try to run the given command, and emulate it if it fails
+
+Supported PROGRAM values:
+  aclocal      touch file \`aclocal.m4'
+  autoconf     touch file \`configure'
+  autoheader   touch file \`config.h.in'
+  automake     touch all \`Makefile.in' files
+  bison        create \`y.tab.[ch]', if possible, from existing .[ch]
+  flex         create \`lex.yy.c', if possible, from existing .c
+  help2man     touch the output file
+  lex          create \`lex.yy.c', if possible, from existing .c
+  makeinfo     touch the output file
+  tar          try tar, gnutar, gtar, then tar without non-portable flags
+  yacc         create \`y.tab.[ch]', if possible, from existing .[ch]
+
+Send bug reports to <bug-automake@gnu.org>."
+    exit $?
+    ;;
+
+  -v|--v|--ve|--ver|--vers|--versi|--versio|--version)
+    echo "missing $scriptversion (GNU Automake)"
+    exit $?
+    ;;
+
+  -*)
+    echo 1>&2 "$0: Unknown \`$1' option"
+    echo 1>&2 "Try \`$0 --help' for more information"
+    exit 1
+    ;;
+
+esac
+
+# Now exit if we have it, but it failed.  Also exit now if we
+# don't have it and --version was passed (most likely to detect
+# the program).
+case "$1" in
+  lex|yacc)
+    # Not GNU programs, they don't have --version.
+    ;;
+
+  tar)
+    if test -n "$run"; then
+       echo 1>&2 "ERROR: \`tar' requires --run"
+       exit 1
+    elif test "x$2" = "x--version" || test "x$2" = "x--help"; then
+       exit 1
+    fi
+    ;;
+
+  *)
+    if test -z "$run" && ($1 --version) > /dev/null 2>&1; then
+       # We have it, but it failed.
+       exit 1
+    elif test "x$2" = "x--version" || test "x$2" = "x--help"; then
+       # Could not run --version or --help.  This is probably someone
+       # running `$TOOL --version' or `$TOOL --help' to check whether
+       # $TOOL exists and not knowing $TOOL uses missing.
+       exit 1
+    fi
+    ;;
+esac
+
+# If it does not exist, or fails to run (possibly an outdated version),
+# try to emulate it.
+case "$1" in
+  aclocal*)
+    echo 1>&2 "\
+WARNING: \`$1' is $msg.  You should only need it if
+         you modified \`acinclude.m4' or \`${configure_ac}'.  You might want
+         to install the \`Automake' and \`Perl' packages.  Grab them from
+         any GNU archive site."
+    touch aclocal.m4
+    ;;
+
+  autoconf)
+    echo 1>&2 "\
+WARNING: \`$1' is $msg.  You should only need it if
+         you modified \`${configure_ac}'.  You might want to install the
+         \`Autoconf' and \`GNU m4' packages.  Grab them from any GNU
+         archive site."
+    touch configure
+    ;;
+
+  autoheader)
+    echo 1>&2 "\
+WARNING: \`$1' is $msg.  You should only need it if
+         you modified \`acconfig.h' or \`${configure_ac}'.  You might want
+         to install the \`Autoconf' and \`GNU m4' packages.  Grab them
+         from any GNU archive site."
+    files=`sed -n 's/^[ ]*A[CM]_CONFIG_HEADER(\([^)]*\)).*/\1/p' ${configure_ac}`
+    test -z "$files" && files="config.h"
+    touch_files=
+    for f in $files; do
+      case "$f" in
+      *:*) touch_files="$touch_files "`echo "$f" |
+				       sed -e 's/^[^:]*://' -e 's/:.*//'`;;
+      *) touch_files="$touch_files $f.in";;
+      esac
+    done
+    touch $touch_files
+    ;;
+
+  automake*)
+    echo 1>&2 "\
+WARNING: \`$1' is $msg.  You should only need it if
+         you modified \`Makefile.am', \`acinclude.m4' or \`${configure_ac}'.
+         You might want to install the \`Automake' and \`Perl' packages.
+         Grab them from any GNU archive site."
+    find . -type f -name Makefile.am -print |
+	   sed 's/\.am$/.in/' |
+	   while read f; do touch "$f"; done
+    ;;
+
+  autom4te)
+    echo 1>&2 "\
+WARNING: \`$1' is needed, but is $msg.
+         You might have modified some files without having the
+         proper tools for further handling them.
+         You can get \`$1' as part of \`Autoconf' from any GNU
+         archive site."
+
+    file=`echo "$*" | sed -n 's/.*--output[ =]*\([^ ]*\).*/\1/p'`
+    test -z "$file" && file=`echo "$*" | sed -n 's/.*-o[ ]*\([^ ]*\).*/\1/p'`
+    if test -f "$file"; then
+	touch $file
+    else
+	test -z "$file" || exec >$file
+	echo "#! /bin/sh"
+	echo "# Created by GNU Automake missing as a replacement of"
+	echo "#  $ $@"
+	echo "exit 0"
+	chmod +x $file
+	exit 1
+    fi
+    ;;
+
+  bison|yacc)
+    echo 1>&2 "\
+WARNING: \`$1' $msg.  You should only need it if
+         you modified a \`.y' file.  You may need the \`Bison' package
+         in order for those modifications to take effect.  You can get
+         \`Bison' from any GNU archive site."
+    rm -f y.tab.c y.tab.h
+    if [ $# -ne 1 ]; then
+        eval LASTARG="\${$#}"
+	case "$LASTARG" in
+	*.y)
+	    SRCFILE=`echo "$LASTARG" | sed 's/y$/c/'`
+	    if [ -f "$SRCFILE" ]; then
+	         cp "$SRCFILE" y.tab.c
+	    fi
+	    SRCFILE=`echo "$LASTARG" | sed 's/y$/h/'`
+	    if [ -f "$SRCFILE" ]; then
+	         cp "$SRCFILE" y.tab.h
+	    fi
+	  ;;
+	esac
+    fi
+    if [ ! -f y.tab.h ]; then
+	echo >y.tab.h
+    fi
+    if [ ! -f y.tab.c ]; then
+	echo 'main() { return 0; }' >y.tab.c
+    fi
+    ;;
+
+  lex|flex)
+    echo 1>&2 "\
+WARNING: \`$1' is $msg.  You should only need it if
+         you modified a \`.l' file.  You may need the \`Flex' package
+         in order for those modifications to take effect.  You can get
+         \`Flex' from any GNU archive site."
+    rm -f lex.yy.c
+    if [ $# -ne 1 ]; then
+        eval LASTARG="\${$#}"
+	case "$LASTARG" in
+	*.l)
+	    SRCFILE=`echo "$LASTARG" | sed 's/l$/c/'`
+	    if [ -f "$SRCFILE" ]; then
+	         cp "$SRCFILE" lex.yy.c
+	    fi
+	  ;;
+	esac
+    fi
+    if [ ! -f lex.yy.c ]; then
+	echo 'main() { return 0; }' >lex.yy.c
+    fi
+    ;;
+
+  help2man)
+    echo 1>&2 "\
+WARNING: \`$1' is $msg.  You should only need it if
+	 you modified a dependency of a manual page.  You may need the
+	 \`Help2man' package in order for those modifications to take
+	 effect.  You can get \`Help2man' from any GNU archive site."
+
+    file=`echo "$*" | sed -n 's/.*-o \([^ ]*\).*/\1/p'`
+    if test -z "$file"; then
+	file=`echo "$*" | sed -n 's/.*--output=\([^ ]*\).*/\1/p'`
+    fi
+    if [ -f "$file" ]; then
+	touch $file
+    else
+	test -z "$file" || exec >$file
+	echo ".ab help2man is required to generate this page"
+	exit 1
+    fi
+    ;;
+
+  makeinfo)
+    echo 1>&2 "\
+WARNING: \`$1' is $msg.  You should only need it if
+         you modified a \`.texi' or \`.texinfo' file, or any other file
+         indirectly affecting the aspect of the manual.  The spurious
+         call might also be the consequence of using a buggy \`make' (AIX,
+         DU, IRIX).  You might want to install the \`Texinfo' package or
+         the \`GNU make' package.  Grab either from any GNU archive site."
+    # The file to touch is that specified with -o ...
+    file=`echo "$*" | sed -n 's/.*-o \([^ ]*\).*/\1/p'`
+    if test -z "$file"; then
+      # ... or it is the one specified with @setfilename ...
+      infile=`echo "$*" | sed 's/.* \([^ ]*\) *$/\1/'`
+      file=`sed -n '/^@setfilename/ { s/.* \([^ ]*\) *$/\1/; p; q; }' $infile`
+      # ... or it is derived from the source name (dir/f.texi becomes f.info)
+      test -z "$file" && file=`echo "$infile" | sed 's,.*/,,;s,.[^.]*$,,'`.info
+    fi
+    # If the file does not exist, the user really needs makeinfo;
+    # let's fail without touching anything.
+    test -f $file || exit 1
+    touch $file
+    ;;
+
+  tar)
+    shift
+
+    # We have already tried tar in the generic part.
+    # Look for gnutar/gtar before invocation to avoid ugly error
+    # messages.
+    if (gnutar --version > /dev/null 2>&1); then
+       gnutar "$@" && exit 0
+    fi
+    if (gtar --version > /dev/null 2>&1); then
+       gtar "$@" && exit 0
+    fi
+    firstarg="$1"
+    if shift; then
+	case "$firstarg" in
+	*o*)
+	    firstarg=`echo "$firstarg" | sed s/o//`
+	    tar "$firstarg" "$@" && exit 0
+	    ;;
+	esac
+	case "$firstarg" in
+	*h*)
+	    firstarg=`echo "$firstarg" | sed s/h//`
+	    tar "$firstarg" "$@" && exit 0
+	    ;;
+	esac
+    fi
+
+    echo 1>&2 "\
+WARNING: I can't seem to be able to run \`tar' with the given arguments.
+         You may want to install GNU tar or Free paxutils, or check the
+         command line arguments."
+    exit 1
+    ;;
+
+  *)
+    echo 1>&2 "\
+WARNING: \`$1' is needed, and is $msg.
+         You might have modified some files without having the
+         proper tools for further handling them.  Check the \`README' file,
+         it often tells you about the needed prerequisites for installing
+         this package.  You may also peek at any GNU archive site, in case
+         some other package would contain this missing \`$1' program."
+    exit 1
+    ;;
+esac
+
+exit 0
+
+# Local variables:
+# eval: (add-hook 'write-file-hooks 'time-stamp)
+# time-stamp-start: "scriptversion="
+# time-stamp-format: "%:y-%02m-%02d.%02H"
+# time-stamp-end: "$"
+# End:

menuselect/mxml/ANNOUNCEMENT

@@ -0,0 +1,5 @@
+Mini-XML 2.2.2 is now available for download from:
+
+    http://www.easysw.com/~mike/mxml/software.php
+
+Mini-XML 2.2.2 fixes a bug in the reading of custom data nodes.

menuselect/mxml/CHANGES

@@ -0,0 +1,213 @@
+CHANGES - 05/19/2005
+--------------------
+
+CHANGES IN Mini-XML 2.2.2
+
+	- mxmlLoad*() did not treat custom data as opaque, so
+	  whitespace characters would be lost.
+
+
+CHANGES IN Mini-XML 2.2.1
+
+	- mxmlLoadFd(), mxmlLoadFile(), and mxmlLoadString() now
+	  correctly return NULL on error (STR #21)
+	- mxmlNewInteger(), mxmlNewOpaque(), mxmlNewReal(),
+	  mxmlNewText(), and mxmlNewTextf() incorrectly required
+	  a parent node (STR #22)
+	- Fixed an XML output bug in mxmldoc.
+	- The "make install" target now uses the install command
+	  to set the proper permissions on UNIX/Linux/OSX.
+	- Fixed a MingW/Cygwin compilation problem (STR #18)
+
+
+CHANGES IN Mini-XML 2.2
+
+	- Added shared library support (STR #17)
+	- mxmlLoad*() now returns an error when an XML stream
+	  contains illegal control characters (STR #10)
+	- mxmlLoad*() now returns an error when an element
+	  contains two attributes with the same name in
+	  conformance with the XML spec (STR #16)
+	- Added support for CDATA (STR #14, STR #15)
+	- Updated comment and processing instruction handling -
+	  no entity support per XML specification.
+	- Added checking for invalid comment termination ("--->"
+	  is not allowed)
+
+
+CHANGES IN Mini-XML 2.1
+
+	- Added support for custom data nodes (STR #6)
+	- Now treat UTF-8 sequences which are longer than
+	  necessary as an error (STR #4)
+	- Fixed entity number support (STR #8)
+	- Fixed mxmlLoadString() bug with UTF-8 (STR #7)
+	- Fixed entity lookup bug (STR #5)
+	- Added mxmlLoadFd() and mxmlSaveFd() functions.
+	- Fixed multi-word UTF-16 handling.
+
+
+CHANGES IN Mini-XML 2.0
+
+	- New programmers manual.
+	- Added Visual C++ project files for Microsoft Windows
+	  users.
+	- Added optimizations to mxmldoc, mxmlSaveFile(), and
+	  mxmlIndexNew() (STR #2)
+	- mxmlEntityAddCallback() now returns an integer status
+	  (STR #2)
+	- Added UTF-16 support (input only; all output is UTF-8)
+	- Added index functions to build a searchable index of
+	  XML nodes.
+	- Added character entity callback interface to support
+	  additional character entities beyond those defined in
+	  the XHTML specification.
+	- Added support for XHTML character entities.
+	- The mxmldoc utility now produces XML output which
+	  conforms to an updated XML schema, described in the file
+	  "doc/mxmldoc.xsd".
+	- Changed the whitespace callback interface to return
+	  strings instead of a single character, allowing for
+	  greater control over the formatting of XML files
+	  written using Mini-XML.  THIS CHANGE WILL REQUIRE
+	  CHANGES TO YOUR 1.x CODE IF YOU USE WHITESPACE
+	  CALLBACKS.
+	- The mxmldoc utility is now capable of documenting C++
+	  classes, functions, and structures, and correctly
+	  handles C++ comments.
+	- Added new modular tests for mxmldoc.
+	- Updated the mxmldoc output to be more compatible with
+	  embedding in manuals produced with HTMLDOC.
+	- The makefile incorrectly included a "/" separator
+	  between the destination path and install path.  This
+	  caused problems when building and installing with
+	  MingW.
+
+
+CHANGES IN Mini-XML 1.3
+
+	- Fixes for mxmldoc.
+	- Added support for reading standard HTML entity names.
+	- mxmlLoadString/File() did not decode character
+	  entities in element names, attribute names, or
+	  attribute values.
+	- mxmlLoadString/File() would crash when loading non-
+	  conformant XML data under an existing parent (top)
+	  node.
+	- Fixed several bugs in the mxmldoc utility.
+	- Added new error callback function to catch a variety
+	  of errors and log them to someplace other than stderr.
+	- The mxmlElementSetAttr() function now allows for NULL
+	  attribute values.
+	- The load and save functions now properly handle quoted
+	  element and attribute name strings properly, e.g. for
+	  !DOCTYPE declarations.
+
+
+CHANGES IN Mini-XML 1.2
+
+	- Added new "set" methods to set the value of a node.
+	- Added new formatted text methods mxmlNewTextf() and
+	  mxmlSetTextf() to create/set a text node value using
+	  printf-style formats.
+	- Added new standard callbacks for use with the mxmlLoad
+	  functions.
+	- Updated the HTML documentation to include examples of
+	  the walk and load function output.
+	- Added --with/without-ansi configure option to control
+	  the strdup() function check.
+	- Added --with/without-snprintf configure option to
+	  control the snprintf() and vsnprintf() function
+	  checks.
+
+
+CHANGES IN Mini-XML 1.1.2
+
+	- The mxml(3) man page wasn't updated for the string
+	  functions.
+	- mxmlSaveString() returned the wrong number of
+	  characters.
+	- mxml_add_char() updated the buffer pointer in the
+	  wrong place.
+
+
+CHANGES IN Mini-XML 1.1.1
+
+	- The private mxml_add_ch() function did not update the
+	  start-of-buffer pointer which could cause a crash when
+	  using mxmlSaveString().
+	- The private mxml_write_ws() function called putc()
+	  instead of using the proper callback which could cause
+	  a crash when using mxmlSaveString().
+	- Added a mxmlSaveAllocString() convenience function for
+	  saving an XML node tree to an allocated string.
+
+
+CHANGES IN Mini-XML 1.1
+
+	- The mxmlLoadFile() function now uses dynamically
+	  allocated string buffers for element names, attribute
+	  names, and attribute values.  Previously they were
+	  capped at 16383, 255, and 255 bytes, respectively.
+	- Added a new mxmlLoadString() function for loading an
+	  XML node tree from a string.
+	- Added a new mxmlSaveString() function for saving an
+	  XML node tree to a string.
+	- Add emulation of strdup() if the local platform does
+	  not provide the function.
+
+
+CHANGES IN Mini-XML 1.0
+
+	- The mxmldoc program now handles function arguments,
+	  structures, unions, enumerations, classes, and
+	  typedefs properly.
+	- Documentation provided via mxmldoc and more in-line
+	  comments in the code.
+	- Added man pages and packaging files.
+
+
+CHANGES IN Mini-XML 0.93
+
+	- New mxmldoc example program that is also used to
+	  create and update code documentation using XML and
+	  produce HTML reference pages.
+	- Added mxmlAdd() and mxmlRemove() functions to add and
+	  remove nodes from a tree.  This provides more
+	  flexibility over where the nodes are inserted and
+	  allows nodes to be moved within the tree as needed.
+	- mxmlLoadFile() now correctly handles comments.
+	- mxmlLoadFile() now supports the required "gt", "quot",
+	  and "nbsp" character entities.
+	- mxmlSaveFile() now uses newlines as whitespace
+	  when valid to do so.
+	- mxmlFindElement() now also takes attribute name and
+	  attribute value string arguments to limit the search
+	  to specific elements with attributes and/or values.
+	  NULL pointers can be used as "wildcards".
+	- Added uninstall target to makefile, and auto-reconfig
+	  if Makefile.in or configure.in are changed.
+	- mxmlFindElement(), mxmlWalkNext(), and mxmlWalkPrev()
+	  now all provide "descend" arguments to control whether
+	  they descend into child nodes in the tree.
+	- Fixed some whitespace issues in mxmlLoadFile().
+	- Fixed Unicode output and whitespace issues in
+	  mxmlSaveFile().
+	- mxmlSaveFile() now supports a whitespace callback to
+	  provide more human-readable XML output under program
+	  control.
+
+
+CHANGES IN Mini-XML 0.92
+
+	- mxmlSaveFile() didn't return a value on success.
+
+
+CHANGES IN Mini-XML 0.91
+
+	- mxmlWalkNext() would go into an infinite loop.
+
+
+CHANGES IN Mini-XML 0.9
+
+	- Initial public release.

menuselect/mxml/COPYING

@@ -0,0 +1,482 @@
+		  GNU LIBRARY GENERAL PUBLIC LICENSE
+			 Version 2, June 1991
+
+	  Copyright (C) 1991 Free Software Foundation, Inc.
+       59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
+
+     Everyone is permitted to copy and distribute verbatim copies
+      of this license document, but changing it is not allowed.
+
+    [This is the first released version of the library GPL.  It is
+   numbered 2 because it goes with version 2 of the ordinary GPL.]
+
+			       Preamble
+
+  The licenses for most software are designed to take away your
+freedom to share and change it.  By contrast, the GNU General Public
+Licenses are intended to guarantee your freedom to share and change
+free software--to make sure the software is free for all its users.
+
+  This license, the Library General Public License, applies to some
+specially designated Free Software Foundation software, and to any
+other libraries whose authors decide to use it.  You can use it for
+your libraries, too.
+
+  When we speak of free software, we are referring to freedom, not
+price.  Our General Public Licenses are designed to make sure that you
+have the freedom to distribute copies of free software (and charge for
+this service if you wish), that you receive source code or can get it
+if you want it, that you can change the software or use pieces of it
+in new free programs; and that you know you can do these things.
+
+  To protect your rights, we need to make restrictions that forbid
+anyone to deny you these rights or to ask you to surrender the rights.
+These restrictions translate to certain responsibilities for you if
+you distribute copies of the library, or if you modify it.
+
+  For example, if you distribute copies of the library, whether gratis
+or for a fee, you must give the recipients all the rights that we gave
+you.  You must make sure that they, too, receive or can get the source
+code.  If you link a program with the library, you must provide
+complete object files to the recipients so that they can relink them
+with the library, after making changes to the library and recompiling
+it.  And you must show them these terms so they know their rights.
+
+  Our method of protecting your rights has two steps: (1) copyright
+the library, and (2) offer you this license which gives you legal
+permission to copy, distribute and/or modify the library.
+
+  Also, for each distributor's protection, we want to make certain
+that everyone understands that there is no warranty for this free
+library.  If the library is modified by someone else and passed on, we
+want its recipients to know that what they have is not the original
+version, so that any problems introduced by others will not reflect on
+the original authors' reputations.
+
+  Finally, any free program is threatened constantly by software
+patents.  We wish to avoid the danger that companies distributing free
+software will individually obtain patent licenses, thus in effect
+transforming the program into proprietary software.  To prevent this,
+we have made it clear that any patent must be licensed for everyone's
+free use or not licensed at all.
+
+  Most GNU software, including some libraries, is covered by the ordinary
+GNU General Public License, which was designed for utility programs.  This
+license, the GNU Library General Public License, applies to certain
+designated libraries.  This license is quite different from the ordinary
+one; be sure to read it in full, and don't assume that anything in it is
+the same as in the ordinary license.
+
+  The reason we have a separate public license for some libraries is that
+they blur the distinction we usually make between modifying or adding to a
+program and simply using it.  Linking a program with a library, without
+changing the library, is in some sense simply using the library, and is
+analogous to running a utility program or application program.  However, in
+a textual and legal sense, the linked executable is a combined work, a
+derivative of the original library, and the ordinary General Public License
+treats it as such.
+
+  Because of this blurred distinction, using the ordinary General
+Public License for libraries did not effectively promote software
+sharing, because most developers did not use the libraries.  We
+concluded that weaker conditions might promote sharing better.
+
+  However, unrestricted linking of non-free programs would deprive the
+users of those programs of all benefit from the free status of the
+libraries themselves.  This Library General Public License is intended to
+permit developers of non-free programs to use free libraries, while
+preserving your freedom as a user of such programs to change the free
+libraries that are incorporated in them.  (We have not seen how to achieve
+this as regards changes in header files, but we have achieved it as regards
+changes in the actual functions of the Library.)  The hope is that this
+will lead to faster development of free libraries.
+
+  The precise terms and conditions for copying, distribution and
+modification follow.  Pay close attention to the difference between a
+"work based on the library" and a "work that uses the library".  The
+former contains code derived from the library, while the latter only
+works together with the library.
+
+  Note that it is possible for a library to be covered by the ordinary
+General Public License rather than by this special one.
+
+		  GNU LIBRARY GENERAL PUBLIC LICENSE
+   TERMS AND CONDITIONS FOR COPYING, DISTRIBUTION AND MODIFICATION
+
+  0. This License Agreement applies to any software library which
+contains a notice placed by the copyright holder or other authorized
+party saying it may be distributed under the terms of this Library
+General Public License (also called "this License").  Each licensee is
+addressed as "you".
+
+  A "library" means a collection of software functions and/or data
+prepared so as to be conveniently linked with application programs
+(which use some of those functions and data) to form executables.
+
+  The "Library", below, refers to any such software library or work
+which has been distributed under these terms.  A "work based on the
+Library" means either the Library or any derivative work under
+copyright law: that is to say, a work containing the Library or a
+portion of it, either verbatim or with modifications and/or translated
+straightforwardly into another language.  (Hereinafter, translation is
+included without limitation in the term "modification".)
+
+  "Source code" for a work means the preferred form of the work for
+making modifications to it.  For a library, complete source code means
+all the source code for all modules it contains, plus any associated
+interface definition files, plus the scripts used to control compilation
+and installation of the library.
+
+  Activities other than copying, distribution and modification are not
+covered by this License; they are outside its scope.  The act of
+running a program using the Library is not restricted, and output from
+such a program is covered only if its contents constitute a work based
+on the Library (independent of the use of the Library in a tool for
+writing it).  Whether that is true depends on what the Library does
+and what the program that uses the Library does.
+
+  1. You may copy and distribute verbatim copies of the Library's
+complete source code as you receive it, in any medium, provided that
+you conspicuously and appropriately publish on each copy an
+appropriate copyright notice and disclaimer of warranty; keep intact
+all the notices that refer to this License and to the absence of any
+warranty; and distribute a copy of this License along with the
+Library.
+
+  You may charge a fee for the physical act of transferring a copy,
+and you may at your option offer warranty protection in exchange for a
+fee.
+
+  2. You may modify your copy or copies of the Library or any portion
+of it, thus forming a work based on the Library, and copy and
+distribute such modifications or work under the terms of Section 1
+above, provided that you also meet all of these conditions:
+
+    a) The modified work must itself be a software library.
+
+    b) You must cause the files modified to carry prominent notices
+    stating that you changed the files and the date of any change.
+
+    c) You must cause the whole of the work to be licensed at no
+    charge to all third parties under the terms of this License.
+
+    d) If a facility in the modified Library refers to a function or a
+    table of data to be supplied by an application program that uses
+    the facility, other than as an argument passed when the facility
+    is invoked, then you must make a good faith effort to ensure that,
+    in the event an application does not supply such function or
+    table, the facility still operates, and performs whatever part of
+    its purpose remains meaningful.
+
+    (For example, a function in a library to compute square roots has
+    a purpose that is entirely well-defined independent of the
+    application.  Therefore, Subsection 2d requires that any
+    application-supplied function or table used by this function must
+    be optional: if the application does not supply it, the square
+    root function must still compute square roots.)
+
+These requirements apply to the modified work as a whole.  If
+identifiable sections of that work are not derived from the Library,
+and can be reasonably considered independent and separate works in
+themselves, then this License, and its terms, do not apply to those
+sections when you distribute them as separate works.  But when you
+distribute the same sections as part of a whole which is a work based
+on the Library, the distribution of the whole must be on the terms of
+this License, whose permissions for other licensees extend to the
+entire whole, and thus to each and every part regardless of who wrote
+it.
+
+Thus, it is not the intent of this section to claim rights or contest
+your rights to work written entirely by you; rather, the intent is to
+exercise the right to control the distribution of derivative or
+collective works based on the Library.
+
+In addition, mere aggregation of another work not based on the Library
+with the Library (or with a work based on the Library) on a volume of
+a storage or distribution medium does not bring the other work under
+the scope of this License.
+
+  3. You may opt to apply the terms of the ordinary GNU General Public
+License instead of this License to a given copy of the Library.  To do
+this, you must alter all the notices that refer to this License, so
+that they refer to the ordinary GNU General Public License, version 2,
+instead of to this License.  (If a newer version than version 2 of the
+ordinary GNU General Public License has appeared, then you can specify
+that version instead if you wish.)  Do not make any other change in
+these notices.
+
+  Once this change is made in a given copy, it is irreversible for
+that copy, so the ordinary GNU General Public License applies to all
+subsequent copies and derivative works made from that copy.
+
+  This option is useful when you wish to copy part of the code of
+the Library into a program that is not a library.
+
+  4. You may copy and distribute the Library (or a portion or
+derivative of it, under Section 2) in object code or executable form
+under the terms of Sections 1 and 2 above provided that you accompany
+it with the complete corresponding machine-readable source code, which
+must be distributed under the terms of Sections 1 and 2 above on a
+medium customarily used for software interchange.
+
+  If distribution of object code is made by offering access to copy
+from a designated place, then offering equivalent access to copy the
+source code from the same place satisfies the requirement to
+distribute the source code, even though third parties are not
+compelled to copy the source along with the object code.
+
+  5. A program that contains no derivative of any portion of the
+Library, but is designed to work with the Library by being compiled or
+linked with it, is called a "work that uses the Library".  Such a
+work, in isolation, is not a derivative work of the Library, and
+therefore falls outside the scope of this License.
+
+  However, linking a "work that uses the Library" with the Library
+creates an executable that is a derivative of the Library (because it
+contains portions of the Library), rather than a "work that uses the
+library".  The executable is therefore covered by this License.
+Section 6 states terms for distribution of such executables.
+
+  When a "work that uses the Library" uses material from a header file
+that is part of the Library, the object code for the work may be a
+derivative work of the Library even though the source code is not.
+Whether this is true is especially significant if the work can be
+linked without the Library, or if the work is itself a library.  The
+threshold for this to be true is not precisely defined by law.
+
+  If such an object file uses only numerical parameters, data
+structure layouts and accessors, and small macros and small inline
+functions (ten lines or less in length), then the use of the object
+file is unrestricted, regardless of whether it is legally a derivative
+work.  (Executables containing this object code plus portions of the
+Library will still fall under Section 6.)
+
+  Otherwise, if the work is a derivative of the Library, you may
+distribute the object code for the work under the terms of Section 6.
+Any executables containing that work also fall under Section 6,
+whether or not they are linked directly with the Library itself.
+
+  6. As an exception to the Sections above, you may also compile or
+link a "work that uses the Library" with the Library to produce a
+work containing portions of the Library, and distribute that work
+under terms of your choice, provided that the terms permit
+modification of the work for the customer's own use and reverse
+engineering for debugging such modifications.
+
+  You must give prominent notice with each copy of the work that the
+Library is used in it and that the Library and its use are covered by
+this License.  You must supply a copy of this License.  If the work
+during execution displays copyright notices, you must include the
+copyright notice for the Library among them, as well as a reference
+directing the user to the copy of this License.  Also, you must do one
+of these things:
+
+    a) Accompany the work with the complete corresponding
+    machine-readable source code for the Library including whatever
+    changes were used in the work (which must be distributed under
+    Sections 1 and 2 above); and, if the work is an executable linked
+    with the Library, with the complete machine-readable "work that
+    uses the Library", as object code and/or source code, so that the
+    user can modify the Library and then relink to produce a modified
+    executable containing the modified Library.  (It is understood
+    that the user who changes the contents of definitions files in the
+    Library will not necessarily be able to recompile the application
+    to use the modified definitions.)
+
+    b) Accompany the work with a written offer, valid for at
+    least three years, to give the same user the materials
+    specified in Subsection 6a, above, for a charge no more
+    than the cost of performing this distribution.
+
+    c) If distribution of the work is made by offering access to copy
+    from a designated place, offer equivalent access to copy the above
+    specified materials from the same place.
+
+    d) Verify that the user has already received a copy of these
+    materials or that you have already sent this user a copy.
+
+  For an executable, the required form of the "work that uses the
+Library" must include any data and utility programs needed for
+reproducing the executable from it.  However, as a special exception,
+the source code distributed need not include anything that is normally
+distributed (in either source or binary form) with the major
+components (compiler, kernel, and so on) of the operating system on
+which the executable runs, unless that component itself accompanies
+the executable.
+
+  It may happen that this requirement contradicts the license
+restrictions of other proprietary libraries that do not normally
+accompany the operating system.  Such a contradiction means you cannot
+use both them and the Library together in an executable that you
+distribute.
+
+  7. You may place library facilities that are a work based on the
+Library side-by-side in a single library together with other library
+facilities not covered by this License, and distribute such a combined
+library, provided that the separate distribution of the work based on
+the Library and of the other library facilities is otherwise
+permitted, and provided that you do these two things:
+
+    a) Accompany the combined library with a copy of the same work
+    based on the Library, uncombined with any other library
+    facilities.  This must be distributed under the terms of the
+    Sections above.
+
+    b) Give prominent notice with the combined library of the fact
+    that part of it is a work based on the Library, and explaining
+    where to find the accompanying uncombined form of the same work.
+
+  8. You may not copy, modify, sublicense, link with, or distribute
+the Library except as expressly provided under this License.  Any
+attempt otherwise to copy, modify, sublicense, link with, or
+distribute the Library is void, and will automatically terminate your
+rights under this License.  However, parties who have received copies,
+or rights, from you under this License will not have their licenses
+terminated so long as such parties remain in full compliance.
+
+  9. You are not required to accept this License, since you have not
+signed it.  However, nothing else grants you permission to modify or
+distribute the Library or its derivative works.  These actions are
+prohibited by law if you do not accept this License.  Therefore, by
+modifying or distributing the Library (or any work based on the
+Library), you indicate your acceptance of this License to do so, and
+all its terms and conditions for copying, distributing or modifying
+the Library or works based on it.
+
+  10. Each time you redistribute the Library (or any work based on the
+Library), the recipient automatically receives a license from the
+original licensor to copy, distribute, link with or modify the Library
+subject to these terms and conditions.  You may not impose any further
+restrictions on the recipients' exercise of the rights granted herein.
+You are not responsible for enforcing compliance by third parties to
+this License.
+
+  11. If, as a consequence of a court judgment or allegation of patent
+infringement or for any other reason (not limited to patent issues),
+conditions are imposed on you (whether by court order, agreement or
+otherwise) that contradict the conditions of this License, they do not
+excuse you from the conditions of this License.  If you cannot
+distribute so as to satisfy simultaneously your obligations under this
+License and any other pertinent obligations, then as a consequence you
+may not distribute the Library at all.  For example, if a patent
+license would not permit royalty-free redistribution of the Library by
+all those who receive copies directly or indirectly through you, then
+the only way you could satisfy both it and this License would be to
+refrain entirely from distribution of the Library.
+
+If any portion of this section is held invalid or unenforceable under any
+particular circumstance, the balance of the section is intended to apply,
+and the section as a whole is intended to apply in other circumstances.
+
+It is not the purpose of this section to induce you to infringe any
+patents or other property right claims or to contest validity of any
+such claims; this section has the sole purpose of protecting the
+integrity of the free software distribution system which is
+implemented by public license practices.  Many people have made
+generous contributions to the wide range of software distributed
+through that system in reliance on consistent application of that
+system; it is up to the author/donor to decide if he or she is willing
+to distribute software through any other system and a licensee cannot
+impose that choice.
+
+This section is intended to make thoroughly clear what is believed to
+be a consequence of the rest of this License.
+
+  12. If the distribution and/or use of the Library is restricted in
+certain countries either by patents or by copyrighted interfaces, the
+original copyright holder who places the Library under this License may add
+an explicit geographical distribution limitation excluding those countries,
+so that distribution is permitted only in or among countries not thus
+excluded.  In such case, this License incorporates the limitation as if
+written in the body of this License.
+
+  13. The Free Software Foundation may publish revised and/or new
+versions of the Library General Public License from time to time.
+Such new versions will be similar in spirit to the present version,
+but may differ in detail to address new problems or concerns.
+
+Each version is given a distinguishing version number.  If the Library
+specifies a version number of this License which applies to it and
+"any later version", you have the option of following the terms and
+conditions either of that version or of any later version published by
+the Free Software Foundation.  If the Library does not specify a
+license version number, you may choose any version ever published by
+the Free Software Foundation.
+
+  14. If you wish to incorporate parts of the Library into other free
+programs whose distribution conditions are incompatible with these,
+write to the author to ask for permission.  For software which is
+copyrighted by the Free Software Foundation, write to the Free
+Software Foundation; we sometimes make exceptions for this.  Our
+decision will be guided by the two goals of preserving the free status
+of all derivatives of our free software and of promoting the sharing
+and reuse of software generally.
+
+			    NO WARRANTY
+
+  15. BECAUSE THE LIBRARY IS LICENSED FREE OF CHARGE, THERE IS NO
+WARRANTY FOR THE LIBRARY, TO THE EXTENT PERMITTED BY APPLICABLE LAW.
+EXCEPT WHEN OTHERWISE STATED IN WRITING THE COPYRIGHT HOLDERS AND/OR
+OTHER PARTIES PROVIDE THE LIBRARY "AS IS" WITHOUT WARRANTY OF ANY
+KIND, EITHER EXPRESSED OR IMPLIED, INCLUDING, BUT NOT LIMITED TO, THE
+IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR
+PURPOSE.  THE ENTIRE RISK AS TO THE QUALITY AND PERFORMANCE OF THE
+LIBRARY IS WITH YOU.  SHOULD THE LIBRARY PROVE DEFECTIVE, YOU ASSUME
+THE COST OF ALL NECESSARY SERVICING, REPAIR OR CORRECTION.
+
+  16. IN NO EVENT UNLESS REQUIRED BY APPLICABLE LAW OR AGREED TO IN
+WRITING WILL ANY COPYRIGHT HOLDER, OR ANY OTHER PARTY WHO MAY MODIFY
+AND/OR REDISTRIBUTE THE LIBRARY AS PERMITTED ABOVE, BE LIABLE TO YOU
+FOR DAMAGES, INCLUDING ANY GENERAL, SPECIAL, INCIDENTAL OR
+CONSEQUENTIAL DAMAGES ARISING OUT OF THE USE OR INABILITY TO USE THE
+LIBRARY (INCLUDING BUT NOT LIMITED TO LOSS OF DATA OR DATA BEING
+RENDERED INACCURATE OR LOSSES SUSTAINED BY YOU OR THIRD PARTIES OR A
+FAILURE OF THE LIBRARY TO OPERATE WITH ANY OTHER SOFTWARE), EVEN IF
+SUCH HOLDER OR OTHER PARTY HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH
+DAMAGES.
+
+		     END OF TERMS AND CONDITIONS
+
+     Appendix: How to Apply These Terms to Your New Libraries
+
+  If you develop a new library, and you want it to be of the greatest
+possible use to the public, we recommend making it free software that
+everyone can redistribute and change.  You can do so by permitting
+redistribution under these terms (or, alternatively, under the terms of the
+ordinary General Public License).
+
+  To apply these terms, attach the following notices to the library.  It is
+safest to attach them to the start of each source file to most effectively
+convey the exclusion of warranty; and each file should have at least the
+"copyright" line and a pointer to where the full notice is found.
+
+    <one line to give the library's name and a brief idea of what it does.>
+    Copyright (C) <year>  <name of author>
+
+    This library is free software; you can redistribute it and/or
+    modify it under the terms of the GNU Library General Public
+    License as published by the Free Software Foundation; either
+    version 2 of the License, or (at your option) any later version.
+
+    This library is distributed in the hope that it will be useful,
+    but WITHOUT ANY WARRANTY; without even the implied warranty of
+    MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
+    Library General Public License for more details.
+
+    You should have received a copy of the GNU Library General Public
+    License along with this library; if not, write to the Free
+    Software Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+
+Also add information on how to contact you by electronic and paper mail.
+
+You should also get your employer (if you work as a programmer) or your
+school, if any, to sign a "copyright disclaimer" for the library, if
+necessary.  Here is a sample; alter the names:
+
+  Yoyodyne, Inc., hereby disclaims all copyright interest in the
+  library `Frob' (a library for tweaking knobs) written by James Random Hacker.
+
+  <signature of Ty Coon>, 1 April 1990
+  Ty Coon, President of Vice
+
+That's all there is to it!

menuselect/mxml/Makefile.in

@@ -0,0 +1,342 @@
+#
+# "$Id: Makefile.in 23382 2006-04-29 15:44:02Z russell $"
+#
+# Makefile for Mini-XML, a small XML-like file parsing library.
+#
+# Copyright 2003-2005 by Michael Sweet.
+#
+# This program is free software; you can redistribute it and/or
+# modify it under the terms of the GNU Library General Public
+# License as published by the Free Software Foundation; either
+# version 2, or (at your option) any later version.
+#
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+# GNU General Public License for more details.
+#
+
+#
+# Compiler tools definitions...
+#
+
+AR		=	@AR@
+ARFLAGS		=	@ARFLAGS@
+CC		=	@CC@
+CFLAGS		=	$(OPTIM) @CFLAGS@ @CPPFLAGS@
+CP		=	@CP@
+DSO		=	@DSO@
+DSOFLAGS	=	@DSOFLAGS@
+LDFLAGS		=	$(OPTIM) @LDFLAGS@
+INSTALL		=	@INSTALL@
+LIBMXML		=	@LIBMXML@
+LN		=	@LN@ -s
+MKDIR		=	@MKDIR@
+OPTIM		=	@OPTIM@
+RANLIB		=	@RANLIB@
+RM		=	@RM@ -f
+SHELL		=	/bin/sh
+
+
+#
+# Configured directories...
+#
+
+prefix		=	@prefix@
+exec_prefix	=	@exec_prefix@
+bindir		=	@bindir@
+includedir	=	@includedir@
+libdir		=	@libdir@
+mandir		=	@mandir@
+docdir		=	@docdir@
+datarootdir =	@datarootdir@
+BUILDROOT	=	$(DSTROOT)
+
+
+#
+# Install commands...
+#
+
+INSTALL_BIN	=	$(LIBTOOL) $(INSTALL) -m 755 -s
+INSTALL_DATA	=	$(INSTALL) -m 644
+INSTALL_DIR	=	$(INSTALL) -d
+INSTALL_LIB	=	$(LIBTOOL) $(INSTALL) -m 755
+INSTALL_MAN	=	$(INSTALL) -m 644
+INSTALL_SCRIPT	=	$(INSTALL) -m 755
+
+
+#
+# Rules...
+#
+
+.SUFFIXES:	.0 .1 .3 .c .man .o
+.c.o:
+	$(CC) $(CFLAGS) -c $<
+.man.0 .man.1 .man.3:
+	$(RM) $@
+	$(NROFF) -man $< >$@
+
+
+#
+# Targets...
+#
+
+DOCFILES	=	doc/mxml.html doc/mxmldoc.xsd \
+			README COPYING CHANGES
+PUBLIBOBJS	=	mxml-attr.o mxml-entity.o mxml-file.o mxml-index.o \
+			mxml-node.o mxml-search.o mxml-set.o
+LIBOBJS		=	$(PUBLIBOBJS) mxml-private.o mxml-string.o
+OBJS		=	mxmldoc.o testmxml.o $(LIBOBJS)
+TARGETS		=	$(LIBMXML) mxmldoc testmxml mxml.xml
+
+
+#
+# Make everything...
+#
+
+all:		Makefile configure config.h $(TARGETS)
+
+
+#
+# Clean everything...
+#
+
+clean:
+	$(RM) $(OBJS) $(TARGETS)
+	$(RM) mxmldoc-static libmxml.a
+	$(RM) *.bck *.bak
+	$(RM) config.cache config.log config.status config.h
+	$(RM) -r autom4te*.cache
+
+distclean: clean
+	$(RM) mxml.list Makefile
+
+#
+# Install everything...
+#
+
+install:	$(TARGETS) install-$(LIBMXML) install-libmxml.a
+	$(INSTALL_DIR) $(BUILDROOT)$(bindir)
+	$(INSTALL_BIN) mxmldoc $(BUILDROOT)$(bindir) 
+	$(INSTALL_DIR) $(BUILDROOT)$(docdir)
+	for file in $(DOCFILES); do \
+		$(INSTALL_MAN) $$file $(BUILDROOT)$(docdir); \
+	done
+	$(INSTALL_DIR) $(BUILDROOT)$(includedir)
+	$(INSTALL_DATA) mxml.h $(BUILDROOT)$(includedir)
+	$(INSTALL_DIR) $(BUILDROOT)$(libdir)/pkgconfig
+	$(INSTALL_DATA) mxml.pc $(BUILDROOT)$(libdir)/pkgconfig
+	$(INSTALL_DIR) $(BUILDROOT)$(mandir)/cat1
+	$(INSTALL_MAN) doc/mxmldoc.$(CAT1EXT) $(BUILDROOT)$(mandir)/cat1/mxmldoc.$(CAT1EXT)
+	$(INSTALL_DIR) $(BUILDROOT)$(mandir)/cat3
+	$(INSTALL_MAN) doc/mxml.$(CAT3EXT) $(BUILDROOT)$(mandir)/cat3/mxml.$(CAT3EXT)
+	$(INSTALL_DIR) $(BUILDROOT)$(mandir)/man1
+	$(INSTALL_MAN) doc/mxmldoc.man $(BUILDROOT)$(mandir)/man1/mxmldoc.$(MAN1EXT)
+	$(INSTALL_DIR) $(BUILDROOT)$(mandir)/man3
+	$(INSTALL_MAN) doc/mxml.man $(BUILDROOT)$(mandir)/man3/mxml.$(MAN3EXT)
+
+install-libmxml.a:
+	$(INSTALL_DIR) $(BUILDROOT)$(libdir)
+	$(INSTALL_LIB) libmxml.a $(BUILDROOT)$(libdir)
+
+install-libmxml.so.1.0:
+	$(INSTALL_DIR) $(BUILDROOT)$(libdir)
+	$(INSTALL_LIB) libmxml.so.1.0 $(BUILDROOT)$(libdir)
+	$(RM) $(BUILDROOT)$(libdir)/libmxml.so
+	$(LN) libmxml.so.1.0 $(BUILDROOT)$(libdir)/libmxml.so
+	$(RM) $(BUILDROOT)$(libdir)/libmxml.so.1
+	$(LN) libmxml.so.1.0 $(BUILDROOT)$(libdir)/libmxml.so.1
+
+install-libmxml.sl.1:
+	$(INSTALL_DIR) $(BUILDROOT)$(libdir)
+	$(INSTALL_LIB) libmxml.sl.1 $(BUILDROOT)$(libdir)
+	$(RM) $(BUILDROOT)$(libdir)/libmxml.so
+	$(LN) libmxml.sl.1 $(BUILDROOT)$(libdir)/libmxml.sl
+
+install-libmxml.1.dylib:
+	$(INSTALL_DIR) $(BUILDROOT)$(libdir)
+	$(INSTALL_LIB) libmxml.1.dylib $(BUILDROOT)$(libdir)
+	$(RM) $(BUILDROOT)$(libdir)/libmxml.dylib
+	$(LN) libmxml.1.dylib $(BUILDROOT)$(libdir)/libmxml.dylib
+
+
+#
+# Uninstall everything...
+#
+
+uninstall: uninstall-$(LIBMXML) uninstall-libmxml.a
+	$(RM) $(BUILDROOT)$(bindir)/mxmldoc
+	$(RM) -r $(BUILDROOT)$(docdir)
+	$(RM) $(BUILDROOT)$(includedir)/mxml.h
+	$(RM) $(BUILDROOT)$(libdir)/pkgconfig/mxml.pc
+	$(RM) $(BUILDROOT)$(mandir)/cat1/mxmldoc.$(CAT1EXT)
+	$(RM) $(BUILDROOT)$(mandir)/cat3/mxml.$(CAT3EXT)
+	$(RM) $(BUILDROOT)$(mandir)/man1/mxmldoc.$(MAN1EXT)
+	$(RM) $(BUILDROOT)$(mandir)/man3/mxml.$(MAN3EXT)
+
+uninstall-libmxml.a:
+	$(RM) $(BUILDROOT)$(libdir)/libmxml.a
+
+uninstall-libmxml.so.1.0:
+	$(RM) $(BUILDROOT)$(libdir)/libmxml.so
+	$(RM) $(BUILDROOT)$(libdir)/libmxml.so.1
+	$(RM) $(BUILDROOT)$(libdir)/libmxml.so.1.0
+
+uninstall-libmxml.sl.1:
+	$(RM) $(BUILDROOT)$(libdir)/libmxml.sl
+	$(RM) $(BUILDROOT)$(libdir)/libmxml.sl.1
+
+uninstall-libmxml.1.dylib:
+	$(RM) $(BUILDROOT)$(libdir)/libmxml.dylib
+	$(RM) $(BUILDROOT)$(libdir)/libmxml.1.dylib
+
+
+#
+# Make packages using EPM (http://www.easysw.com/epm/)
+#
+
+epm:	all
+	epm --output-dir dist -v -f native mxml
+	epm --output-dir dist -v -f portable mxml
+
+
+#
+# autoconf stuff...
+#
+
+Makefile:	Makefile.in
+	if test -f config.status; then \
+		./config.status --recheck; \
+		./config.status; \
+	else \
+		./configure; \
+	fi
+	touch config.h
+
+
+config.h:	configure config.h.in
+	if test -f config.status; then \
+		./config.status --recheck; \
+		./config.status; \
+	else \
+		./configure; \
+	fi
+	touch config.h
+
+
+#
+# libmxml.a
+#
+
+libmxml.a:	$(LIBOBJS)
+	$(RM) $@
+	$(AR) $(ARFLAGS) $@ $(LIBOBJS)
+	$(RANLIB) $@
+
+$(LIBOBJS):	mxml.h
+
+
+#
+# libmxml.so.1.0
+#
+
+libmxml.so.1.0:	$(LIBOBJS)
+	$(DSO) $(DSOFLAGS) -o libmxml.so.1.0 $(LIBOBJS)
+	$(RM) libmxml.so libmxml.so.1
+	$(LN) libmxml.so.1.0 libmxml.so
+	$(LN) libmxml.so.1.0 libmxml.so.1
+
+
+#
+# libmxml.sl.1
+#
+
+libmxml.sl.1:	$(LIBOBJS)
+	$(DSO) $(DSOFLAGS) -o libmxml.sl.1 $(LIBOBJS)
+	$(RM) libmxml.sl libmxml.sl.1
+	$(LN) libmxml.sl.1 libmxml.sl
+
+
+#
+# libmxml.1.dylib
+#
+
+libmxml.1.dylib:	$(LIBOBJS)
+	$(DSO) $(DSOFLAGS) -o libmxml.1.dylib \
+		-install_name $(libdir)/libmxml.dylib \
+		-current_version 1.0.0 \
+		-compatibility_version 1.0.0 \
+		$(LIBOBJS)
+	$(RM) libmxml.dylib libmxml.1.dylib
+	$(LN) libmxml.1.dylib libmxml.dylib
+
+
+#
+# mxmldoc
+#
+
+mxmldoc:	$(LIBMXML) mxmldoc.o
+	$(CC) $(LDFLAGS) -o $@ mxmldoc.o -L. -lmxml
+
+mxmldoc-static:	libmxml.a mxmldoc.o
+	$(CC) $(LDFLAGS) -o $@ mxmldoc.o libmxml.a
+
+mxmldoc.o:	mxml.h
+
+
+#
+# testmxml
+#
+
+testmxml:	libmxml.a testmxml.o
+	$(CC) $(LDFLAGS) -o $@ testmxml.o libmxml.a
+	@echo Testing library...
+	./testmxml test.xml >temp1.xml 2>temp1s.xml
+	./testmxml temp1.xml >temp2.xml 2>temp2s.xml
+	@if cmp temp1.xml temp2.xml; then \
+		echo Stdio file test passed!; \
+		$(RM) temp2.xml temp2s.xml; \
+	else \
+		echo Stdio file test failed!; \
+	fi
+	@if cmp temp1.xml temp1s.xml; then \
+		echo String test passed!; \
+		$(RM) temp1.xml temp1s.xml; \
+	else \
+		echo String test failed!; \
+	fi
+	@if cmp test.xml test.xmlfd; then \
+		echo File descriptor test passed!; \
+		$(RM) test.xmlfd; \
+	else \
+		echo File descriptor test failed!; \
+	fi
+
+testmxml.o:	mxml.h
+
+
+#
+# mxml.xml
+#
+
+mxml.xml:	mxmldoc-static mxml.h $(PUBLIBOBJS:.o=.c)
+	$(RM) mxml.xml
+	./mxmldoc-static mxml.xml mxml.h $(PUBLIBOBJS:.o=.c) >doc/reference.html
+
+valgrind:	mxmldoc-static
+	$(RM) valgrind.xml
+	valgrind --tool=memcheck --leak-check=yes ./mxmldoc-static \
+		valgrind.xml mxml.h $(PUBLIBOBJS:.o=.c) \
+		>valgrind.html 2>valgrind.out
+
+
+#
+# All object files depend on the makefile...
+#
+
+$(OBJS):	Makefile config.h
+
+
+#
+# End of "$Id: Makefile.in 23382 2006-04-29 15:44:02Z russell $".
+#

menuselect/mxml/README

@@ -0,0 +1,204 @@
+README - 05/19/2005
+-------------------
+
+
+INTRODUCTION
+
+    This README file describes the Mini-XML library version
+    2.2.2.
+
+    Mini-XML is a small XML parsing library that you can use to
+    read XML and XML-like data files in your application without
+    requiring large non-standard libraries.  Mini-XML only
+    requires an ANSI C compatible compiler (GCC works, as do
+    most vendors' ANSI C compilers) and a "make" program.
+
+    Mini-XML provides the following functionality:
+
+	- Reading of UTF-8 and UTF-16 and writing of UTF-8
+	  encoded XML files and strings.
+	- Data is stored in a linked-list tree structure,
+	  preserving the XML data hierarchy.
+	- Supports arbitrary element names, attributes, and
+	  attribute values with no preset limits, just available
+	  memory.
+	- Supports integer, real, opaque ("cdata"), and text
+	  data types in "leaf" nodes.
+	- Functions for creating and managing trees of data.
+	- "Find" and "walk" functions for easily locating and
+	  navigating trees of data.
+
+    Mini-XML doesn't do validation or other types of processing
+    on the data based upon schema files or other sources of
+    definition information.
+
+
+BUILDING Mini-XML
+
+    Mini-XML comes with an autoconf-based configure script; just
+    type the following command to get things going:
+
+        ./configure
+
+    The default install prefix is /usr/local, which can be
+    overridden using the --prefix option:
+
+        ./configure --prefix=/foo
+
+    Other configure options can be found using the --help
+    option:
+
+        ./configure --help
+
+    Once you have configured the software, type "make" to do the
+    build and run the test program to verify that things are
+    working, as follows:
+
+        make
+
+    If you are using Mini-XML under Microsoft Windows with
+    Visual C++, use the included project files in the "vcnet"
+    subdirectory to build the library instead.
+
+
+INSTALLING Mini-XML
+
+    The "install" target will install Mini-XML in the lib and
+    include directories:
+
+        make install
+
+    Once you have installed it, use the "-lmxml" option to link
+    your application against it.
+
+
+DOCUMENTATION
+
+    The documentation is available in the "doc" subdirectory in
+    the files "mxml.html" (HTML) and "mxml.pdf" (PDF). You can
+    also look at the "testmxml.c" and "mxmldoc.c" source files
+    for examples of using Mini-XML.
+
+    Mini-XML provides a single header file which you include:
+
+        #include <mxml.h>
+
+    Nodes are defined by the "mxml_node_t" structure; the "type"
+    member defines the node type (element, integer, opaque,
+    real, or text) which determines which value you want to look
+    at in the "value" union.  New nodes can be created using the
+    "mxmlNewElement()", "mxmlNewInteger()", "mxmlNewOpaque()",
+    "mxmlNewReal()", and "mxmlNewText()" functions.  Only
+    elements can have child nodes, and the top node must be an
+    element, usually "?xml".
+
+    You load an XML file using the "mxmlLoadFile()" function:
+
+        FILE *fp;
+        mxml_node_t *tree;
+
+	fp = fopen("filename.xml", "r");
+	tree = mxmlLoadFile(NULL, fp, MXML_NO_CALLBACK);
+	fclose(fp);
+
+    Similarly, you save an XML file using the "mxmlSaveFile()"
+    function:
+
+        FILE *fp;
+        mxml_node_t *tree;
+
+	fp = fopen("filename.xml", "w");
+	mxmlSaveFile(tree, fp, MXML_NO_CALLBACK);
+	fclose(fp);
+
+    The "mxmlLoadString()", "mxmlSaveAllocString()", and
+    "mxmlSaveString()" functions load XML node trees from and
+    save XML node trees to strings:
+
+        char buffer[8192];
+	char *ptr;
+	mxml_node_t *tree;
+
+        ...
+	tree = mxmlLoadString(NULL, buffer, MXML_NO_CALLBACK);
+
+        ...
+        mxmlSaveString(tree, buffer, sizeof(buffer), MXML_NO_CALLBACK);
+
+        ...
+	ptr = mxmlSaveAllocString(tree, MXML_NO_CALLBACK);
+
+    You can find a named element/node using the
+    "mxmlFindElement()" function:
+
+        mxml_node_t *node = mxmlFindElement(tree, tree, "name", "attr",
+	                                    "value", MXML_DESCEND);
+
+    The "name", "attr", and "value" arguments can be passed as
+    NULL to act as wildcards, e.g.:
+
+        /* Find the first "a" element */
+        node = mxmlFindElement(tree, tree, "a", NULL, NULL, MXML_DESCEND);
+
+        /* Find the first "a" element with "href" attribute */
+        node = mxmlFindElement(tree, tree, "a", "href", NULL, MXML_DESCEND);
+
+        /* Find the first "a" element with "href" to a URL */
+        node = mxmlFindElement(tree, tree, "a", "href",
+	                       "http://www.easysw.com/~mike/mxml/",
+			       MXML_DESCEND);
+
+        /* Find the first element with a "src" attribute*/
+        node = mxmlFindElement(tree, tree, NULL, "src", NULL, MXML_DESCEND);
+
+        /* Find the first element with a "src" = "foo.jpg" */
+        node = mxmlFindElement(tree, tree, NULL, "src", "foo.jpg",
+	                       MXML_DESCEND);
+
+    You can also iterate with the same function:
+
+        mxml_node_t *node;
+
+	for (node = mxmlFindElement(tree, tree, "name", NULL, NULL,
+	                            MXML_DESCEND);
+	     node != NULL;
+	     node = mxmlFindElement(node, tree, "name", NULL, NULL,
+	                            MXML_DESCEND))
+        {
+	  ... do something ...
+	}
+
+    Finally, once you are done with the XML data, use the
+    "mxmlDelete()" function to recursively free the memory that
+    is used for a particular node or the entire tree:
+
+        mxmlDelete(tree);
+
+
+GETTING HELP AND REPORTING PROBLEMS
+
+    You can email me at "mxml@easysw.com" to report problems
+    and/or ask for help.  Just don't expect an instant response,
+    as I get a *lot* of email...
+
+
+LEGAL STUFF
+
+    The Mini-XML library is Copyright 2003-2005 by Michael Sweet.
+
+    This library is free software; you can redistribute it
+    and/or modify it under the terms of the GNU Library General
+    Public License as published by the Free Software Foundation;
+    either version 2 of the License, or (at your option) any
+    later version.
+
+    This library is distributed in the hope that it will be
+    useful, but WITHOUT ANY WARRANTY; without even the implied
+    warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR
+    PURPOSE.  See the GNU Library General Public License for
+    more details.
+
+    You should have received a copy of the GNU Library General
+    Public License along with this library; if not, write to the
+    Free Software Foundation, Inc., 675 Mass Ave, Cambridge, MA
+    02139, USA.

menuselect/mxml/config.h.in

@@ -0,0 +1,69 @@
+/*
+ * "$Id: config.h.in 22267 2006-04-24 17:11:45Z kpfleming $"
+ *
+ * Configuration file for Mini-XML, a small XML-like file parsing library.
+ *
+ * Copyright 2003-2005 by Michael Sweet.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU Library General Public
+ * License as published by the Free Software Foundation; either
+ * version 2, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ */
+
+/*
+ * Include necessary headers...
+ */
+
+#include <stdio.h>
+#include <stdlib.h>
+#include <string.h>
+#include <stdarg.h>
+#include <ctype.h>
+
+
+/*
+ * Version number...
+ */
+
+#define MXML_VERSION	""
+
+
+/*
+ * Do we have the vsnprintf() function?
+ */
+
+#undef HAVE_VSNPRINTF
+
+
+/*
+ * Do we have the strXXX() functions?
+ */
+
+#undef HAVE_STRDUP
+
+
+/*
+ * Define prototypes for string functions as needed...
+ */
+
+#  ifndef HAVE_STRDUP
+extern char	*mxml_strdup(const char *);
+#    define strdup mxml_strdup
+#  endif /* !HAVE_STRDUP */
+
+extern char	*mxml_strdupf(const char *, va_list);
+
+#  ifndef HAVE_VSNPRINTF
+extern int	mxml_vsnprintf(char *, size_t, const char *, va_list);
+#    define vsnprintf mxml_vsnprintf
+#  endif /* !HAVE_VSNPRINTF */
+
+/*
+ * End of "$Id: config.h.in 22267 2006-04-24 17:11:45Z kpfleming $".
+ */

menuselect/mxml/configure.in

@@ -0,0 +1,343 @@
+dnl
+dnl "$Id: configure.in 260 2010-04-27 19:11:06Z qwell $"
+dnl
+dnl Configuration script for Mini-XML, a small XML-like file parsing library.
+dnl
+dnl Copyright 2003-2009 by Michael Sweet.
+dnl
+dnl This program is free software; you can redistribute it and/or
+dnl modify it under the terms of the GNU Library General Public
+dnl License as published by the Free Software Foundation; either
+dnl version 2, or (at your option) any later version.
+dnl
+dnl This program is distributed in the hope that it will be useful,
+dnl but WITHOUT ANY WARRANTY; without even the implied warranty of
+dnl MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+dnl GNU General Public License for more details.
+dnl
+
+dnl Specify a source file from the distribution...
+AC_INIT(mxml.h)
+
+dnl Set the name of the config header file...
+AC_CONFIG_HEADER(config.h)
+
+dnl Version number...
+VERSION=2.2.2
+AC_SUBST(VERSION)
+AC_DEFINE_UNQUOTED(MXML_VERSION, "Mini-XML v$VERSION")
+
+dnl Clear default debugging options and set normal optimization by
+dnl default unless the user asks for debugging specifically.
+CFLAGS="${CFLAGS:=}"
+CXXFLAGS="${CXXFLAGS:=}"
+LDFLAGS="${LDFLAGS:=}"
+AC_SUBST(LDFLAGS)
+OPTIM=""
+AC_SUBST(OPTIM)
+
+AC_ARG_WITH(ansi, [  --with-ansi             set full ANSI C mode, default=no],
+	use_ansi="$withval",
+	use_ansi="no")
+
+AC_ARG_WITH(archflags, [  --with-archflags        set additional architecture flags, default=none],
+	ARCHFLAGS="$withval",
+	ARCHFLAGS="")
+AC_SUBST(ARCHFLAGS)
+
+AC_ARG_ENABLE(debug, [  --enable-debug          turn on debugging, default=no],
+if eval "test x$enable_debug = xyes"; then
+ 	OPTIM="-g"
+fi)
+
+AC_ARG_WITH(docdir, [  --with-docdir           set directory for documentation, default=${prefix}/share/doc/mxml],
+	docdir="$withval",
+	docdir="NONE")
+
+AC_SUBST(docdir)
+
+AC_ARG_WITH(vsnprintf, [  --with-vsnprintf        use vsnprintf emulation functions, default=auto],
+	use_vsnprintf="$withval",
+	use_vsnprintf="no")
+
+dnl Get the operating system and version number...
+uname=`uname`
+uversion=`uname -r | sed -e '1,$s/[[^0-9]]//g'`
+if test x$uname = xIRIX64; then
+	uname="IRIX"
+fi
+
+dnl Checks for programs...
+AC_PROG_CC
+AC_PROG_CXX
+AC_PROG_INSTALL
+if test "$INSTALL" = "$ac_install_sh"; then
+	# Use full path to install-sh script...
+	INSTALL="`pwd`/install-sh -c"
+fi
+AC_PROG_RANLIB
+AC_PATH_PROGS(AR,ar gar)
+AC_PATH_PROG(CP,cp)
+AC_PATH_PROG(LN,ln)
+AC_PATH_PROG(MKDIR,mkdir)
+AC_PATH_PROG(RM,rm)
+if test -z $AR ; then
+	AC_MSG_ERROR('ar' binary is mandatory.  Please either install the 'ar' binary or provide the path to configure with --with-ar=/path/to/ar)
+fi
+
+dnl Flags for "ar" command...
+case "$uname" in
+        Darwin* | *BSD*)
+                ARFLAGS="-rcv"
+                ;;
+        *)
+                ARFLAGS="crvs"
+                ;;
+esac
+
+AC_SUBST(ARFLAGS)
+
+dnl Inline functions...
+AC_C_INLINE
+
+dnl Checks for string functions.
+if test "x$use_ansi" != xyes; then
+	AC_CHECK_FUNCS(strdup)
+fi
+
+if test "x$use_vsnprintf" != xyes; then
+	AC_CHECK_FUNCS(snprintf vsnprintf)
+fi
+
+dnl Check for "long long" support...
+AC_CACHE_CHECK(for long long int, ac_cv_c_long_long,
+	[if test "$GCC" = yes; then
+		ac_cv_c_long_long=yes
+	else
+		AC_TRY_COMPILE(,[long long int i;],
+			ac_cv_c_long_long=yes,
+			ac_cv_c_long_long=no)
+	fi])
+
+if test $ac_cv_c_long_long = yes; then
+	AC_DEFINE(HAVE_LONG_LONG)
+fi
+
+dnl Threading support
+AC_ARG_ENABLE(threads, [  --enable-threads        enable multi-threading support])
+
+have_pthread=no
+PTHREAD_FLAGS=""
+PTHREAD_LIBS=""
+
+if test "x$enable_threads" != xno; then
+	AC_CHECK_HEADER(pthread.h, AC_DEFINE(HAVE_PTHREAD_H))
+
+	if test x$ac_cv_header_pthread_h = xyes; then
+		dnl Check various threading options for the platforms we support
+		for flag in -lpthreads -lpthread -pthread; do
+        		AC_MSG_CHECKING([for pthread_create using $flag])
+			SAVELIBS="$LIBS"
+			LIBS="$flag $LIBS"
+        		AC_TRY_LINK([#include <pthread.h>],
+				[pthread_create(0, 0, 0, 0);],
+        			have_pthread=yes)
+        		AC_MSG_RESULT([$have_pthread])
+			LIBS="$SAVELIBS"
+
+			if test $have_pthread = yes; then
+				PTHREAD_FLAGS="-D_THREAD_SAFE -D_REENTRANT"
+				PTHREAD_LIBS="$flag"
+
+				# Solaris requires -D_POSIX_PTHREAD_SEMANTICS to
+				# be POSIX-compliant... :(
+				if test $uname = SunOS; then
+					PTHREAD_FLAGS="$PTHREAD_FLAGS -D_POSIX_PTHREAD_SEMANTICS"
+				fi
+				break
+			fi
+		done
+	fi
+fi
+
+AC_SUBST(PTHREAD_FLAGS)
+AC_SUBST(PTHREAD_LIBS)
+
+dnl Shared library support...
+DSO="${DSO:=:}"
+DSOFLAGS="${DSOFLAGS:=}"
+
+AC_ARG_ENABLE(shared, [  --enable-shared         turn on shared libraries, default=no])
+
+if test x$enable_shared = xyes; then
+	AC_MSG_CHECKING(for shared library support)
+	PICFLAG=1
+
+	case "$uname" in
+		SunOS* | UNIX_S*)
+			AC_MSG_RESULT(yes)
+			LIBMXML="libmxml.so.1.4"
+			DSO="\$(CC)"
+			DSOFLAGS="$DSOFLAGS -Wl,-h,libmxml.so.1 -G -R\$(libdir) \$(OPTIM)"
+			LDFLAGS="$LDFLAGS -R\$(libdir)"
+                	;;
+
+		HP-UX*)
+			AC_MSG_RESULT(yes)
+			LIBMXML="libmxml.sl.1"
+			DSO="ld"
+			DSOFLAGS="$DSOFLAGS -b -z +h libmxml.sl.1 +s +b \$(libdir)"
+			LDFLAGS="$LDFLAGS -Wl,+s,+b,\$(libdir)"
+			;;
+
+		IRIX)
+			AC_MSG_RESULT(yes)
+			LIBMXML="libmxml.so.1.4"
+			DSO="\$(CC)"
+			DSOFLAGS="$DSOFLAGS -Wl,-rpath,\$(libdir),-set_version,sgi1.0,-soname,libmxml.so.1 -shared \$(OPTIM)"
+			;;
+
+		OSF1* | Linux | GNU)
+			AC_MSG_RESULT(yes)
+			LIBMXML="libmxml.so.1.4"
+			DSO="\$(CC)"
+			DSOFLAGS="$DSOFLAGS -Wl,-soname,libmxml.so.1,-rpath,\$(libdir) -shared \$(OPTIM)"
+                        LDFLAGS="$LDFLAGS -Wl,-rpath,\$(libdir)"
+			;;
+
+		*BSD*)
+			AC_MSG_RESULT(yes)
+			LIBMXML="libmxml.so.1.4"
+			DSO="\$(CC)"
+			DSOFLAGS="$DSOFLAGS -Wl,-soname,libmxml.so.1,-R\$(libdir) -shared \$(OPTIM)"
+			LDFLAGS="$LDFLAGS -Wl,-R\$(libdir)"
+                        ;;
+
+		Darwin*)
+			AC_MSG_RESULT(yes)
+			LIBMXML="libmxml.1.dylib"
+			DSO="\$(CC)"
+			DSOFLAGS="$DSOFLAGS \$(RC_CFLAGS) -dynamiclib -lc"
+			;;
+
+		*)
+			AC_MSG_RESULT(no)
+			AC_MSG_WARN(shared libraries not supported on this platform.)
+			PICFLAG=0
+			LIBMXML="libmxml.a"
+			;;
+	esac
+else
+	PICFLAG=0
+	LIBMXML="libmxml.a"
+fi
+
+AC_SUBST(DSO)
+AC_SUBST(DSOFLAGS)
+AC_SUBST(LIBMXML)
+AC_SUBST(PICFLAG)
+
+dnl Add -Wall for GCC...
+if test -n "$GCC"; then
+	CFLAGS="-Wall $CFLAGS"
+
+	if test "x$OPTIM" = x; then
+		OPTIM="-Os -g"
+	fi
+
+	if test "x$use_ansi" = xyes; then
+		CFLAGS="-ansi -pedantic $CFLAGS"
+	fi
+
+	if test $PICFLAG = 1 -a $uname != AIX; then
+    		OPTIM="-fPIC $OPTIM"
+	fi
+else
+	case $uname in
+		HP-UX*)
+			CFLAGS="-Ae $CFLAGS"
+
+			if test "x$OPTIM" = x; then
+				OPTIM="-O"
+			fi
+
+			OPTIM="+DAportable $OPTIM"
+
+			if test $PICFLAG = 1; then
+				OPTIM="+z $OPTIM"
+			fi
+			;;
+
+		UNIX_SVR* | SunOS*)
+			if test "x$OPTIM" = x; then
+				OPTIM="-O"
+			fi
+
+			if test $PICFLAG = 1; then
+				OPTIM="-KPIC $OPTIM"
+			fi
+			;;
+
+		*)
+			if test "x$OPTIM" = x; then
+				OPTIM="-O"
+			fi
+			;;
+	esac
+fi
+
+dnl Fix "prefix" variable if it hasn't been specified...
+if test "$prefix" = "NONE"; then
+	prefix="/usr/local"
+fi
+
+dnl Fix "exec_prefix" variable if it hasn't been specified...
+if test "$exec_prefix" = "NONE"; then
+	exec_prefix="$prefix"
+fi
+
+dnl Fix "docdir" variable if it hasn't been specified...
+if test "$docdir" = "NONE"; then
+	docdir="$datadir/doc/mxml"
+fi
+
+dnl Fix "mandir" variable if it hasn't been specified...
+if test "$mandir" = "\${prefix}/man" -a "$prefix" = "/usr"; then
+	case "$uname" in
+        	*BSD* | Darwin* | Linux*)
+        		# BSD, Darwin (MacOS X), and Linux
+        		mandir="/usr/share/man"
+        		;;
+        	IRIX*)
+        		# SGI IRIX
+        		mandir="/usr/share/catman/u_man"
+        		;;
+        	*)
+        		# All others
+        		mandir="/usr/man"
+        		;;
+	esac
+fi
+
+dnl pkg-config stuff...
+if test "$includedir" != /usr/include; then
+	PC_CFLAGS="-I$includedir"
+else
+	PC_CFLAGS=""
+fi
+
+if test "$libdir" != /usr/lib; then
+	PC_LIBS="-L$libdir -lmxml"
+else
+	PC_LIBS="-lmxml"
+fi
+
+AC_SUBST(PC_CFLAGS)
+AC_SUBST(PC_LIBS)
+
+dnl Output the makefile, etc...
+AC_OUTPUT(Makefile mxml.list mxml.pc)
+
+dnl
+dnl End of "$Id: configure.in 260 2010-04-27 19:11:06Z qwell $".
+dnl

menuselect/mxml/install-sh

@@ -0,0 +1,251 @@
+#!/bin/sh
+#
+# install - install a program, script, or datafile
+# This comes from X11R5 (mit/util/scripts/install.sh).
+#
+# Copyright 1991 by the Massachusetts Institute of Technology
+#
+# Permission to use, copy, modify, distribute, and sell this software and its
+# documentation for any purpose is hereby granted without fee, provided that
+# the above copyright notice appear in all copies and that both that
+# copyright notice and this permission notice appear in supporting
+# documentation, and that the name of M.I.T. not be used in advertising or
+# publicity pertaining to distribution of the software without specific,
+# written prior permission.  M.I.T. makes no representations about the
+# suitability of this software for any purpose.  It is provided "as is"
+# without express or implied warranty.
+#
+# Calling this script install-sh is preferred over install.sh, to prevent
+# `make' implicit rules from creating a file called install from it
+# when there is no Makefile.
+#
+# This script is compatible with the BSD install script, but was written
+# from scratch.  It can only install one file at a time, a restriction
+# shared with many OS's install programs.
+
+
+# set DOITPROG to echo to test this script
+
+# Don't use :- since 4.3BSD and earlier shells don't like it.
+doit="${DOITPROG-}"
+
+
+# put in absolute paths if you don't have them in your path; or use env. vars.
+
+mvprog="${MVPROG-mv}"
+cpprog="${CPPROG-cp}"
+chmodprog="${CHMODPROG-chmod}"
+chownprog="${CHOWNPROG-chown}"
+chgrpprog="${CHGRPPROG-chgrp}"
+stripprog="${STRIPPROG-strip}"
+rmprog="${RMPROG-rm}"
+mkdirprog="${MKDIRPROG-mkdir}"
+
+transformbasename=""
+transform_arg=""
+instcmd="$mvprog"
+chmodcmd="$chmodprog 0755"
+chowncmd=""
+chgrpcmd=""
+stripcmd=""
+rmcmd="$rmprog -f"
+mvcmd="$mvprog"
+src=""
+dst=""
+dir_arg=""
+
+while [ x"$1" != x ]; do
+    case $1 in
+	-c) instcmd="$cpprog"
+	    shift
+	    continue;;
+
+	-d) dir_arg=true
+	    shift
+	    continue;;
+
+	-m) chmodcmd="$chmodprog $2"
+	    shift
+	    shift
+	    continue;;
+
+	-o) chowncmd="$chownprog $2"
+	    shift
+	    shift
+	    continue;;
+
+	-g) chgrpcmd="$chgrpprog $2"
+	    shift
+	    shift
+	    continue;;
+
+	-s) stripcmd="$stripprog"
+	    shift
+	    continue;;
+
+	-t=*) transformarg=`echo $1 | sed 's/-t=//'`
+	    shift
+	    continue;;
+
+	-b=*) transformbasename=`echo $1 | sed 's/-b=//'`
+	    shift
+	    continue;;
+
+	*)  if [ x"$src" = x ]
+	    then
+		src=$1
+	    else
+		# this colon is to work around a 386BSD /bin/sh bug
+		:
+		dst=$1
+	    fi
+	    shift
+	    continue;;
+    esac
+done
+
+if [ x"$src" = x ]
+then
+	echo "install:	no input file specified"
+	exit 1
+else
+	:
+fi
+
+if [ x"$dir_arg" != x ]; then
+	dst=$src
+	src=""
+	
+	if [ -d $dst ]; then
+		instcmd=:
+		chmodcmd=""
+	else
+		instcmd=$mkdirprog
+	fi
+else
+
+# Waiting for this to be detected by the "$instcmd $src $dsttmp" command
+# might cause directories to be created, which would be especially bad 
+# if $src (and thus $dsttmp) contains '*'.
+
+	if [ -f $src -o -d $src ]
+	then
+		:
+	else
+		echo "install:  $src does not exist"
+		exit 1
+	fi
+	
+	if [ x"$dst" = x ]
+	then
+		echo "install:	no destination specified"
+		exit 1
+	else
+		:
+	fi
+
+# If destination is a directory, append the input filename; if your system
+# does not like double slashes in filenames, you may need to add some logic
+
+	if [ -d $dst ]
+	then
+		dst="$dst"/`basename $src`
+	else
+		:
+	fi
+fi
+
+## this sed command emulates the dirname command
+dstdir=`echo $dst | sed -e 's,[^/]*$,,;s,/$,,;s,^$,.,'`
+
+# Make sure that the destination directory exists.
+#  this part is taken from Noah Friedman's mkinstalldirs script
+
+# Skip lots of stat calls in the usual case.
+if [ ! -d "$dstdir" ]; then
+defaultIFS='
+	'
+IFS="${IFS-${defaultIFS}}"
+
+oIFS="${IFS}"
+# Some sh's can't handle IFS=/ for some reason.
+IFS='%'
+set - `echo ${dstdir} | sed -e 's@/@%@g' -e 's@^%@/@'`
+IFS="${oIFS}"
+
+pathcomp=''
+
+while [ $# -ne 0 ] ; do
+	pathcomp="${pathcomp}${1}"
+	shift
+
+	if [ ! -d "${pathcomp}" ] ;
+        then
+		$mkdirprog "${pathcomp}"
+	else
+		:
+	fi
+
+	pathcomp="${pathcomp}/"
+done
+fi
+
+if [ x"$dir_arg" != x ]
+then
+	$doit $instcmd $dst &&
+
+	if [ x"$chowncmd" != x ]; then $doit $chowncmd $dst; else : ; fi &&
+	if [ x"$chgrpcmd" != x ]; then $doit $chgrpcmd $dst; else : ; fi &&
+	if [ x"$stripcmd" != x ]; then $doit $stripcmd $dst; else : ; fi &&
+	if [ x"$chmodcmd" != x ]; then $doit $chmodcmd $dst; else : ; fi
+else
+
+# If we're going to rename the final executable, determine the name now.
+
+	if [ x"$transformarg" = x ] 
+	then
+		dstfile=`basename $dst`
+	else
+		dstfile=`basename $dst $transformbasename | 
+			sed $transformarg`$transformbasename
+	fi
+
+# don't allow the sed command to completely eliminate the filename
+
+	if [ x"$dstfile" = x ] 
+	then
+		dstfile=`basename $dst`
+	else
+		:
+	fi
+
+# Make a temp file name in the proper directory.
+
+	dsttmp=$dstdir/#inst.$$#
+
+# Move or copy the file name to the temp name
+
+	$doit $instcmd $src $dsttmp &&
+
+	trap "rm -f ${dsttmp}" 0 &&
+
+# and set any options; do chmod last to preserve setuid bits
+
+# If any of these fail, we abort the whole thing.  If we want to
+# ignore errors from any of these, just make sure not to ignore
+# errors from the above "$doit $instcmd $src $dsttmp" command.
+
+	if [ x"$chowncmd" != x ]; then $doit $chowncmd $dsttmp; else :;fi &&
+	if [ x"$chgrpcmd" != x ]; then $doit $chgrpcmd $dsttmp; else :;fi &&
+	if [ x"$stripcmd" != x ]; then $doit $stripcmd $dsttmp; else :;fi &&
+	if [ x"$chmodcmd" != x ]; then $doit $chmodcmd $dsttmp; else :;fi &&
+
+# Now rename the file to the real destination.
+
+	$doit $rmcmd -f $dstdir/$dstfile &&
+	$doit $mvcmd $dsttmp $dstdir/$dstfile 
+
+fi &&
+
+
+exit 0

menuselect/mxml/mxml-attr.c

@@ -0,0 +1,181 @@
+/*
+ * "$Id: mxml-attr.c 22267 2006-04-24 17:11:45Z kpfleming $"
+ *
+ * Attribute support code for Mini-XML, a small XML-like file parsing library.
+ *
+ * Copyright 2003-2005 by Michael Sweet.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU Library General Public
+ * License as published by the Free Software Foundation; either
+ * version 2, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * Contents:
+ *
+ *   mxmlElementGetAttr() - Get an attribute.
+ *   mxmlElementSetAttr() - Set an attribute.
+ */
+
+/*
+ * Include necessary headers...
+ */
+
+#include "config.h"
+#include "mxml.h"
+
+
+/*
+ * 'mxmlElementGetAttr()' - Get an attribute.
+ *
+ * This function returns NULL if the node is not an element or the
+ * named attribute does not exist.
+ */
+
+const char *				/* O - Attribute value or NULL */
+mxmlElementGetAttr(mxml_node_t *node,	/* I - Element node */
+                   const char  *name)	/* I - Name of attribute */
+{
+  int	i;				/* Looping var */
+  mxml_attr_t	*attr;			/* Cirrent attribute */
+
+
+#ifdef DEBUG
+  fprintf(stderr, "mxmlElementGetAttr(node=%p, name=\"%s\")\n",
+          node, name ? name : "(null)");
+#endif /* DEBUG */
+
+ /*
+  * Range check input...
+  */
+
+  if (!node || node->type != MXML_ELEMENT || !name)
+    return (NULL);
+
+ /*
+  * Look for the attribute...
+  */
+
+  for (i = node->value.element.num_attrs, attr = node->value.element.attrs;
+       i > 0;
+       i --, attr ++)
+    if (!strcmp(attr->name, name))
+      return (attr->value);
+
+ /*
+  * Didn't find attribute, so return NULL...
+  */
+
+  return (NULL);
+}
+
+
+/*
+ * 'mxmlElementSetAttr()' - Set an attribute.
+ *
+ * If the named attribute already exists, the value of the attribute
+ * is replaced by the new string value. The string value is copied
+ * into the element node. This function does nothing if the node is
+ * not an element.
+ */
+
+void
+mxmlElementSetAttr(mxml_node_t *node,	/* I - Element node */
+                   const char  *name,	/* I - Name of attribute */
+                   const char  *value)	/* I - Attribute value */
+{
+  int		i;			/* Looping var */
+  mxml_attr_t	*attr;			/* New attribute */
+
+
+#ifdef DEBUG
+  fprintf(stderr, "mxmlElementSetAttr(node=%p, name=\"%s\", value=\"%s\")\n",
+          node, name ? name : "(null)", value ? value : "(null)");
+#endif /* DEBUG */
+
+ /*
+  * Range check input...
+  */
+
+  if (!node || node->type != MXML_ELEMENT || !name)
+    return;
+
+ /*
+  * Look for the attribute...
+  */
+
+  for (i = node->value.element.num_attrs, attr = node->value.element.attrs;
+       i > 0;
+       i --, attr ++)
+    if (!strcmp(attr->name, name))
+    {
+     /*
+      * Replace the attribute value and return...
+      */
+
+      if (attr->value)
+        free(attr->value);
+
+      if (value)
+      {
+	if ((attr->value = strdup(value)) == NULL)
+	  mxml_error("Unable to allocate memory for attribute '%s' in element %s!",
+                     name, node->value.element.name);
+      }
+      else
+        attr->value = NULL;
+
+      return;
+    }
+
+ /*
+  * Attribute not found, so add a new one...
+  */
+
+  if (node->value.element.num_attrs == 0)
+    attr = malloc(sizeof(mxml_attr_t));
+  else
+    attr = realloc(node->value.element.attrs,
+                   (node->value.element.num_attrs + 1) * sizeof(mxml_attr_t));
+
+  if (!attr)
+  {
+    mxml_error("Unable to allocate memory for attribute '%s' in element %s!",
+               name, node->value.element.name);
+    return;
+  }
+
+  node->value.element.attrs = attr;
+  attr += node->value.element.num_attrs;
+
+  attr->name = strdup(name);
+  if (value)
+    attr->value = strdup(value);
+  else
+    attr->value = NULL;
+
+  if (!attr->name || (!attr->value && value))
+  {
+    if (attr->name)
+      free(attr->name);
+
+    if (attr->value)
+      free(attr->value);
+
+    mxml_error("Unable to allocate memory for attribute '%s' in element %s!",
+               name, node->value.element.name);
+
+    return;
+  }
+    
+  node->value.element.num_attrs ++;
+}
+
+
+/*
+ * End of "$Id: mxml-attr.c 22267 2006-04-24 17:11:45Z kpfleming $".
+ */

menuselect/mxml/mxml-entity.c

@@ -0,0 +1,472 @@
+/*
+ * "$Id: mxml-entity.c 22267 2006-04-24 17:11:45Z kpfleming $"
+ *
+ * Character entity support code for Mini-XML, a small XML-like
+ * file parsing library.
+ *
+ * Copyright 2003-2005 by Michael Sweet.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU Library General Public
+ * License as published by the Free Software Foundation; either
+ * version 2, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * Contents:
+ *
+ *   mxmlEntityAddCallback()    - Add a callback to convert entities to
+ *                                Unicode.
+ *   mxmlEntityGetName()        - Get the name that corresponds to the
+ *                                character value.
+ *   mxmlEntityGetValue()       - Get the character corresponding to a named
+ *                                entity.
+ *   mxmlEntityRemoveCallback() - Remove a callback.
+ *   default_callback()         - Lookup standard (X)HTML entities.
+ */
+
+/*
+ * Include necessary headers...
+ */
+
+#include "config.h"
+#include "mxml.h"
+
+
+/*
+ * Local functions...
+ */
+
+static int	default_callback(const char *name);
+
+
+/*
+ * Callback array...
+ */
+
+static int	num_callbacks = 1;
+static int	(*callbacks[100])(const char *name) =
+		{
+		  default_callback
+		};
+
+
+/*
+ * 'mxmlEntityAddCallback()' - Add a callback to convert entities to Unicode.
+ */
+
+int					/* O - 0 on success, -1 on failure */
+mxmlEntityAddCallback(int (*cb)(const char *name))
+					/* I - Callback function to add */
+{
+  if (num_callbacks < (int)(sizeof(callbacks) / sizeof(callbacks[0])))
+  {
+    callbacks[num_callbacks] = cb;
+    num_callbacks ++;
+
+    return (0);
+  }
+  else
+  {
+    mxml_error("Unable to add entity callback!");
+
+    return (-1);
+  }
+}
+
+
+/*
+ * 'mxmlEntityGetName()' - Get the name that corresponds to the character value.
+ *
+ * If val does not need to be represented by a named entity, NULL is returned.
+ */
+
+const char *				/* O - Entity name or NULL */
+mxmlEntityGetName(int val)		/* I - Character value */
+{
+  switch (val)
+  {
+    case '&' :
+        return ("amp");
+
+    case '<' :
+        return ("lt");
+
+    case '>' :
+        return ("gt");
+
+    case '\"' :
+        return ("quot");
+
+    default :
+        return (NULL);
+  }
+}
+
+
+/*
+ * 'mxmlEntityGetValue()' - Get the character corresponding to a named entity.
+ *
+ * The entity name can also be a numeric constant. -1 is returned if the
+ * name is not known.
+ */
+
+int					/* O - Character value or -1 on error */
+mxmlEntityGetValue(const char *name)	/* I - Entity name */
+{
+  int	i;				/* Looping var */
+  int	ch;				/* Character value */
+
+
+  for (i = 0; i < num_callbacks; i ++)
+    if ((ch = (callbacks[i])(name)) >= 0)
+      return (ch);
+
+  return (-1);
+}
+
+
+/*
+ * 'mxmlEntityRemoveCallback()' - Remove a callback.
+ */
+
+void
+mxmlEntityRemoveCallback(int (*cb)(const char *name))
+					/* I - Callback function to remove */
+{
+  int	i;				/* Looping var */
+
+
+  for (i = 0; i < num_callbacks; i ++)
+    if (cb == callbacks[i])
+    {
+     /*
+      * Remove the callback...
+      */
+
+      num_callbacks --;
+
+      if (i < num_callbacks)
+        memmove(callbacks + i, callbacks + i + 1,
+	        (num_callbacks - i) * sizeof(callbacks[0]));
+
+      return;
+    }
+}
+
+
+/*
+ * 'default_callback()' - Lookup standard (X)HTML entities.
+ */
+
+static int				/* O - Unicode value or -1 */
+default_callback(const char *name)	/* I - Entity name */
+{
+  int	diff,				/* Difference between names */
+	current,			/* Current entity in search */
+	first,				/* First entity in search */
+	last;				/* Last entity in search */
+  static const struct
+  {
+    const char	*name;			/* Entity name */
+    int		val;			/* Character value */
+  }	entities[] =
+  {
+    { "AElig",		198 },
+    { "Aacute",		193 },
+    { "Acirc",		194 },
+    { "Agrave",		192 },
+    { "Alpha",		913 },
+    { "Aring",		197 },
+    { "Atilde",		195 },
+    { "Auml",		196 },
+    { "Beta",		914 },
+    { "Ccedil",		199 },
+    { "Chi",		935 },
+    { "Dagger",		8225 },
+    { "Delta",		916 },
+    { "Dstrok",		208 },
+    { "ETH",		208 },
+    { "Eacute",		201 },
+    { "Ecirc",		202 },
+    { "Egrave",		200 },
+    { "Epsilon",	917 },
+    { "Eta",		919 },
+    { "Euml",		203 },
+    { "Gamma",		915 },
+    { "Iacute",		205 },
+    { "Icirc",		206 },
+    { "Igrave",		204 },
+    { "Iota",		921 },
+    { "Iuml",		207 },
+    { "Kappa",		922 },
+    { "Lambda",		923 },
+    { "Mu",		924 },
+    { "Ntilde",		209 },
+    { "Nu",		925 },
+    { "OElig",		338 },
+    { "Oacute",		211 },
+    { "Ocirc",		212 },
+    { "Ograve",		210 },
+    { "Omega",		937 },
+    { "Omicron",	927 },
+    { "Oslash",		216 },
+    { "Otilde",		213 },
+    { "Ouml",		214 },
+    { "Phi",		934 },
+    { "Pi",		928 },
+    { "Prime",		8243 },
+    { "Psi",		936 },
+    { "Rho",		929 },
+    { "Scaron",		352 },
+    { "Sigma",		931 },
+    { "THORN",		222 },
+    { "Tau",		932 },
+    { "Theta",		920 },
+    { "Uacute",		218 },
+    { "Ucirc",		219 },
+    { "Ugrave",		217 },
+    { "Upsilon",	933 },
+    { "Uuml",		220 },
+    { "Xi",		926 },
+    { "Yacute",		221 },
+    { "Yuml",		376 },
+    { "Zeta",		918 },
+    { "aacute",		225 },
+    { "acirc",		226 },
+    { "acute",		180 },
+    { "aelig",		230 },
+    { "agrave",		224 },
+    { "alefsym",	8501 },
+    { "alpha",		945 },
+    { "amp",		'&' },
+    { "and",		8743 },
+    { "ang",		8736 },
+    { "aring",		229 },
+    { "asymp",		8776 },
+    { "atilde",		227 },
+    { "auml",		228 },
+    { "bdquo",		8222 },
+    { "beta",		946 },
+    { "brkbar",		166 },
+    { "brvbar",		166 },
+    { "bull",		8226 },
+    { "cap",		8745 },
+    { "ccedil",		231 },
+    { "cedil",		184 },
+    { "cent",		162 },
+    { "chi",		967 },
+    { "circ",		710 },
+    { "clubs",		9827 },
+    { "cong",		8773 },
+    { "copy",		169 },
+    { "crarr",		8629 },
+    { "cup",		8746 },
+    { "curren",		164 },
+    { "dArr",		8659 },
+    { "dagger",		8224 },
+    { "darr",		8595 },
+    { "deg",		176 },
+    { "delta",		948 },
+    { "diams",		9830 },
+    { "die",		168 },
+    { "divide",		247 },
+    { "eacute",		233 },
+    { "ecirc",		234 },
+    { "egrave",		232 },
+    { "empty",		8709 },
+    { "emsp",		8195 },
+    { "ensp",		8194 },
+    { "epsilon",	949 },
+    { "equiv",		8801 },
+    { "eta",		951 },
+    { "eth",		240 },
+    { "euml",		235 },
+    { "euro",		8364 },
+    { "exist",		8707 },
+    { "fnof",		402 },
+    { "forall",		8704 },
+    { "frac12",		189 },
+    { "frac14",		188 },
+    { "frac34",		190 },
+    { "frasl",		8260 },
+    { "gamma",		947 },
+    { "ge",		8805 },
+    { "gt",		'>' },
+    { "hArr",		8660 },
+    { "harr",		8596 },
+    { "hearts",		9829 },
+    { "hellip",		8230 },
+    { "hibar",		175 },
+    { "iacute",		237 },
+    { "icirc",		238 },
+    { "iexcl",		161 },
+    { "igrave",		236 },
+    { "image",		8465 },
+    { "infin",		8734 },
+    { "int",		8747 },
+    { "iota",		953 },
+    { "iquest",		191 },
+    { "isin",		8712 },
+    { "iuml",		239 },
+    { "kappa",		954 },
+    { "lArr",		8656 },
+    { "lambda",		955 },
+    { "lang",		9001 },
+    { "laquo",		171 },
+    { "larr",		8592 },
+    { "lceil",		8968 },
+    { "ldquo",		8220 },
+    { "le",		8804 },
+    { "lfloor",		8970 },
+    { "lowast",		8727 },
+    { "loz",		9674 },
+    { "lrm",		8206 },
+    { "lsaquo",		8249 },
+    { "lsquo",		8216 },
+    { "lt",		'<' },
+    { "macr",		175 },
+    { "mdash",		8212 },
+    { "micro",		181 },
+    { "middot",		183 },
+    { "minus",		8722 },
+    { "mu",		956 },
+    { "nabla",		8711 },
+    { "nbsp",		160 },
+    { "ndash",		8211 },
+    { "ne",		8800 },
+    { "ni",		8715 },
+    { "not",		172 },
+    { "notin",		8713 },
+    { "nsub",		8836 },
+    { "ntilde",		241 },
+    { "nu",		957 },
+    { "oacute",		243 },
+    { "ocirc",		244 },
+    { "oelig",		339 },
+    { "ograve",		242 },
+    { "oline",		8254 },
+    { "omega",		969 },
+    { "omicron",	959 },
+    { "oplus",		8853 },
+    { "or",		8744 },
+    { "ordf",		170 },
+    { "ordm",		186 },
+    { "oslash",		248 },
+    { "otilde",		245 },
+    { "otimes",		8855 },
+    { "ouml",		246 },
+    { "para",		182 },
+    { "part",		8706 },
+    { "permil",		8240 },
+    { "perp",		8869 },
+    { "phi",		966 },
+    { "pi",		960 },
+    { "piv",		982 },
+    { "plusmn",		177 },
+    { "pound",		163 },
+    { "prime",		8242 },
+    { "prod",		8719 },
+    { "prop",		8733 },
+    { "psi",		968 },
+    { "quot",		'\"' },
+    { "rArr",		8658 },
+    { "radic",		8730 },
+    { "rang",		9002 },
+    { "raquo",		187 },
+    { "rarr",		8594 },
+    { "rceil",		8969 },
+    { "rdquo",		8221 },
+    { "real",		8476 },
+    { "reg",		174 },
+    { "rfloor",		8971 },
+    { "rho",		961 },
+    { "rlm",		8207 },
+    { "rsaquo",		8250 },
+    { "rsquo",		8217 },
+    { "sbquo",		8218 },
+    { "scaron",		353 },
+    { "sdot",		8901 },
+    { "sect",		167 },
+    { "shy",		173 },
+    { "sigma",		963 },
+    { "sigmaf",		962 },
+    { "sim",		8764 },
+    { "spades",		9824 },
+    { "sub",		8834 },
+    { "sube",		8838 },
+    { "sum",		8721 },
+    { "sup",		8835 },
+    { "sup1",		185 },
+    { "sup2",		178 },
+    { "sup3",		179 },
+    { "supe",		8839 },
+    { "szlig",		223 },
+    { "tau",		964 },
+    { "there4",		8756 },
+    { "theta",		952 },
+    { "thetasym",	977 },
+    { "thinsp",		8201 },
+    { "thorn",		254 },
+    { "tilde",		732 },
+    { "times",		215 },
+    { "trade",		8482 },
+    { "uArr",		8657 },
+    { "uacute",		250 },
+    { "uarr",		8593 },
+    { "ucirc",		251 },
+    { "ugrave",		249 },
+    { "uml",		168 },
+    { "upsih",		978 },
+    { "upsilon",	965 },
+    { "uuml",		252 },
+    { "weierp",		8472 },
+    { "xi",		958 },
+    { "yacute",		253 },
+    { "yen",		165 },
+    { "yuml",		255 },
+    { "zeta",		950 },
+    { "zwj",		8205 },
+    { "zwnj",		8204 }
+  };
+
+
+ /*
+  * Do a binary search for the named entity...
+  */
+
+  first = 0;
+  last  = (int)(sizeof(entities) / sizeof(entities[0]) - 1);
+
+  while ((last - first) > 1)
+  {
+    current = (first + last) / 2;
+
+    if ((diff = strcmp(name, entities[current].name)) == 0)
+      return (entities[current].val);
+    else if (diff < 0)
+      last = current;
+    else
+      first = current;
+  }
+
+ /*
+  * If we get here, there is a small chance that there is still
+  * a match; check first and last...
+  */
+
+  if (!strcmp(name, entities[first].name))
+    return (entities[first].val);
+  else if (!strcmp(name, entities[last].name))
+    return (entities[last].val);
+  else
+    return (-1);
+}
+
+
+/*
+ * End of "$Id: mxml-entity.c 22267 2006-04-24 17:11:45Z kpfleming $".
+ */

menuselect/mxml/mxml-index.c

@@ -0,0 +1,649 @@
+/*
+ * "$Id: mxml-index.c 22267 2006-04-24 17:11:45Z kpfleming $"
+ *
+ * Index support code for Mini-XML, a small XML-like file parsing library.
+ *
+ * Copyright 2003-2005 by Michael Sweet.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU Library General Public
+ * License as published by the Free Software Foundation; either
+ * version 2, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * Contents:
+ *
+ *   mxmlIndexDelete()   - Delete an index.
+ *   mxmlIndexEnum()     - Return the next node in the index.
+ *   mxmlIndexFind()     - Find the next matching node.
+ *   mxmlIndexNew()      - Create a new index.
+ *   mxmlIndexReset()    - Reset the enumeration/find pointer in the index and
+ *                         return the first node in the index.
+ *   index_compare()     - Compare two nodes.
+ *   index_find()        - Compare a node with index values.
+ *   index_sort()        - Sort the nodes in the index...
+ */
+
+/*
+ * Include necessary headers...
+ */
+
+#include "config.h"
+#include "mxml.h"
+
+
+/*
+ * Sort functions...
+ */
+
+static int	index_compare(mxml_index_t *ind, mxml_node_t *first,
+		              mxml_node_t *second);
+static int	index_find(mxml_index_t *ind, const char *element,
+		           const char *value, mxml_node_t *node);
+static void	index_sort(mxml_index_t *ind, int left, int right);
+
+
+/*
+ * 'mxmlIndexDelete()' - Delete an index.
+ */
+
+void
+mxmlIndexDelete(mxml_index_t *ind)	/* I - Index to delete */
+{
+ /*
+  * Range check input..
+  */
+
+  if (!ind)
+    return;
+
+ /*
+  * Free memory...
+  */
+
+  if (ind->attr)
+    free(ind->attr);
+
+  if (ind->alloc_nodes)
+    free(ind->nodes);
+
+  free(ind);
+}
+
+
+/*
+ * 'mxmlIndexEnum()' - Return the next node in the index.
+ *
+ * Nodes are returned in the sorted order of the index.
+ */
+
+mxml_node_t *				/* O - Next node or NULL if there is none */
+mxmlIndexEnum(mxml_index_t *ind)	/* I - Index to enumerate */
+{
+ /*
+  * Range check input...
+  */
+
+  if (!ind)
+    return (NULL);
+
+ /*
+  * Return the next node...
+  */
+
+  if (ind->cur_node < ind->num_nodes)
+    return (ind->nodes[ind->cur_node ++]);
+  else
+    return (NULL);
+}
+
+
+/*
+ * 'mxmlIndexFind()' - Find the next matching node.
+ *
+ * You should call mxmlIndexReset() prior to using this function for
+ * the first time with a particular set of "element" and "value"
+ * strings. Passing NULL for both "element" and "value" is equivalent
+ * to calling mxmlIndexEnum().
+ */
+
+mxml_node_t *				/* O - Node or NULL if none found */
+mxmlIndexFind(mxml_index_t *ind,	/* I - Index to search */
+              const char   *element,	/* I - Element name to find, if any */
+	      const char   *value)	/* I - Attribute value, if any */
+{
+  int		diff,			/* Difference between names */
+		current,		/* Current entity in search */
+		first,			/* First entity in search */
+		last;			/* Last entity in search */
+
+
+#ifdef DEBUG
+  printf("mxmlIndexFind(ind=%p, element=\"%s\", value=\"%s\")\n",
+         ind, element ? element : "(null)", value ? value : "(null)");
+#endif /* DEBUG */
+
+ /*
+  * Range check input...
+  */
+
+  if (!ind || (!ind->attr && value))
+  {
+#ifdef DEBUG
+    puts("    returning NULL...");
+    printf("    ind->attr=\"%s\"\n", ind->attr ? ind->attr : "(null)");
+#endif /* DEBUG */
+
+    return (NULL);
+  }
+
+ /*
+  * If both element and value are NULL, just enumerate the nodes in the
+  * index...
+  */
+
+  if (!element && !value)
+    return (mxmlIndexEnum(ind));
+
+ /*
+  * If there are no nodes in the index, return NULL...
+  */
+
+  if (!ind->num_nodes)
+  {
+#ifdef DEBUG
+    puts("    returning NULL...");
+    puts("    no nodes!");
+#endif /* DEBUG */
+
+    return (NULL);
+  }
+
+ /*
+  * If cur_node == 0, then find the first matching node...
+  */
+
+  if (ind->cur_node == 0)
+  {
+   /*
+    * Find the first node using a modified binary search algorithm...
+    */
+
+    first = 0;
+    last  = ind->num_nodes - 1;
+
+#ifdef DEBUG
+    printf("    find first time, num_nodes=%d...\n", ind->num_nodes);
+#endif /* DEBUG */
+
+    while ((last - first) > 1)
+    {
+      current = (first + last) / 2;
+
+#ifdef DEBUG
+      printf("    first=%d, last=%d, current=%d\n", first, last, current);
+#endif /* DEBUG */
+
+      if ((diff = index_find(ind, element, value, ind->nodes[current])) == 0)
+      {
+       /*
+        * Found a match, move back to find the first...
+	*/
+
+#ifdef DEBUG
+        puts("    match!");
+#endif /* DEBUG */
+
+        while (current > 0 &&
+	       !index_find(ind, element, value, ind->nodes[current - 1]))
+	  current --;
+
+#ifdef DEBUG
+        printf("    returning first match=%d\n", current);
+#endif /* DEBUG */
+
+       /*
+        * Return the first match and save the index to the next...
+	*/
+
+        ind->cur_node = current + 1;
+
+	return (ind->nodes[current]);
+      }
+      else if (diff < 0)
+	last = current;
+      else
+	first = current;
+
+#ifdef DEBUG
+      printf("    diff=%d\n", diff);
+#endif /* DEBUG */
+    }
+
+   /*
+    * If we get this far, then we found exactly 0 or 1 matches...
+    */
+
+    for (current = first; current <= last; current ++)
+      if (!index_find(ind, element, value, ind->nodes[current]))
+      {
+       /*
+	* Found exactly one (or possibly two) match...
+	*/
+
+#ifdef DEBUG
+	printf("    returning only match %d...\n", current);
+#endif /* DEBUG */
+
+	ind->cur_node = current + 1;
+
+	return (ind->nodes[current]);
+      }
+
+   /*
+    * No matches...
+    */
+
+    ind->cur_node = ind->num_nodes;
+
+#ifdef DEBUG
+    puts("    returning NULL...");
+#endif /* DEBUG */
+
+    return (NULL);
+  }
+  else if (ind->cur_node < ind->num_nodes &&
+           !index_find(ind, element, value, ind->nodes[ind->cur_node]))
+  {
+   /*
+    * Return the next matching node...
+    */
+
+#ifdef DEBUG
+    printf("    returning next match %d...\n", ind->cur_node);
+#endif /* DEBUG */
+
+    return (ind->nodes[ind->cur_node ++]);
+  }
+
+ /*
+  * If we get this far, then we have no matches...
+  */
+
+  ind->cur_node = ind->num_nodes;
+
+#ifdef DEBUG
+  puts("    returning NULL...");
+#endif /* DEBUG */
+
+  return (NULL);
+}
+
+
+/*
+ * 'mxmlIndexNew()' - Create a new index.
+ *
+ * The index will contain all nodes that contain the named element and/or
+ * attribute. If both "element" and "attr" are NULL, then the index will
+ * contain a sorted list of the elements in the node tree.  Nodes are
+ * sorted by element name and optionally by attribute value if the "attr"
+ * argument is not NULL.
+ */
+
+mxml_index_t *				/* O - New index */
+mxmlIndexNew(mxml_node_t *node,		/* I - XML node tree */
+             const char  *element,	/* I - Element to index or NULL for all */
+             const char  *attr)		/* I - Attribute to index or NULL for none */
+{
+  mxml_index_t	*ind;			/* New index */
+  mxml_node_t	*current,		/* Current node in index */
+  		**temp;			/* Temporary node pointer array */
+
+
+ /*
+  * Range check input...
+  */
+
+#ifdef DEBUG
+  printf("mxmlIndexNew(node=%p, element=\"%s\", attr=\"%s\")\n",
+         node, element ? element : "(null)", attr ? attr : "(null)");
+#endif /* DEBUG */
+
+  if (!node)
+    return (NULL);
+
+ /*
+  * Create a new index...
+  */
+
+  if ((ind = calloc(1, sizeof(mxml_index_t))) == NULL)
+  {
+    mxml_error("Unable to allocate %d bytes for index - %s",
+               sizeof(mxml_index_t), strerror(errno));
+    return (NULL);
+  }
+
+  if (attr)
+    ind->attr = strdup(attr);
+
+  if (!element && !attr)
+    current = node;
+  else
+    current = mxmlFindElement(node, node, element, attr, NULL, MXML_DESCEND);
+
+  while (current)
+  {
+    if (ind->num_nodes >= ind->alloc_nodes)
+    {
+      if (!ind->alloc_nodes)
+        temp = malloc(64 * sizeof(mxml_node_t *));
+      else
+        temp = realloc(ind->nodes, (ind->alloc_nodes + 64) * sizeof(mxml_node_t *));
+
+      if (!temp)
+      {
+       /*
+        * Unable to allocate memory for the index, so abort...
+	*/
+
+        mxml_error("Unable to allocate %d bytes for index: %s",
+	           (ind->alloc_nodes + 64) * sizeof(mxml_node_t *),
+		   strerror(errno));
+
+        mxmlIndexDelete(ind);
+	return (NULL);
+      }
+
+      ind->nodes       = temp;
+      ind->alloc_nodes += 64;
+    }
+
+    ind->nodes[ind->num_nodes ++] = current;
+
+    current = mxmlFindElement(current, node, element, attr, NULL, MXML_DESCEND);
+  }
+
+ /*
+  * Sort nodes based upon the search criteria...
+  */
+
+#ifdef DEBUG
+  {
+    int i;				/* Looping var */
+
+
+    printf("%d node(s) in index.\n\n", ind->num_nodes);
+
+    if (attr)
+    {
+      printf("Node      Address   Element         %s\n", attr);
+      puts("--------  --------  --------------  ------------------------------");
+
+      for (i = 0; i < ind->num_nodes; i ++)
+	printf("%8d  %-8p  %-14.14s  %s\n", i, ind->nodes[i],
+	       ind->nodes[i]->value.element.name,
+	       mxmlElementGetAttr(ind->nodes[i], attr));
+    }
+    else
+    {
+      puts("Node      Address   Element");
+      puts("--------  --------  --------------");
+
+      for (i = 0; i < ind->num_nodes; i ++)
+	printf("%8d  %-8p  %s\n", i, ind->nodes[i],
+	       ind->nodes[i]->value.element.name);
+    }
+
+    putchar('\n');
+  }
+#endif /* DEBUG */
+
+  if (ind->num_nodes > 1)
+    index_sort(ind, 0, ind->num_nodes - 1);
+
+#ifdef DEBUG
+  {
+    int i;				/* Looping var */
+
+
+    puts("After sorting:\n");
+
+    if (attr)
+    {
+      printf("Node      Address   Element         %s\n", attr);
+      puts("--------  --------  --------------  ------------------------------");
+
+      for (i = 0; i < ind->num_nodes; i ++)
+	printf("%8d  %-8p  %-14.14s  %s\n", i, ind->nodes[i],
+	       ind->nodes[i]->value.element.name,
+	       mxmlElementGetAttr(ind->nodes[i], attr));
+    }
+    else
+    {
+      puts("Node      Address   Element");
+      puts("--------  --------  --------------");
+
+      for (i = 0; i < ind->num_nodes; i ++)
+	printf("%8d  %-8p  %s\n", i, ind->nodes[i],
+	       ind->nodes[i]->value.element.name);
+    }
+
+    putchar('\n');
+  }
+#endif /* DEBUG */
+
+ /*
+  * Return the new index...
+  */
+
+  return (ind);
+}
+
+
+/*
+ * 'mxmlIndexReset()' - Reset the enumeration/find pointer in the index and
+ *                      return the first node in the index.
+ *
+ * This function should be called prior to using mxmlIndexEnum() or
+ * mxmlIndexFind() for the first time.
+ */
+
+mxml_node_t *				/* O - First node or NULL if there is none */
+mxmlIndexReset(mxml_index_t *ind)	/* I - Index to reset */
+{
+#ifdef DEBUG
+  printf("mxmlIndexReset(ind=%p)\n", ind);
+#endif /* DEBUG */
+
+ /*
+  * Range check input...
+  */
+
+  if (!ind)
+    return (NULL);
+
+ /*
+  * Set the index to the first element...
+  */
+
+  ind->cur_node = 0;
+
+ /*
+  * Return the first node...
+  */
+
+  if (ind->num_nodes)
+    return (ind->nodes[0]);
+  else
+    return (NULL);
+}
+
+
+/*
+ * 'index_compare()' - Compare two nodes.
+ */
+
+static int				/* O - Result of comparison */
+index_compare(mxml_index_t *ind,	/* I - Index */
+              mxml_node_t  *first,	/* I - First node */
+              mxml_node_t  *second)	/* I - Second node */
+{
+  int	diff;				/* Difference */
+
+
+ /*
+  * Check the element name...
+  */
+
+  if ((diff = strcmp(first->value.element.name,
+                     second->value.element.name)) != 0)
+    return (diff);
+
+ /*
+  * Check the attribute value...
+  */
+
+  if (ind->attr)
+  {
+    if ((diff = strcmp(mxmlElementGetAttr(first, ind->attr),
+                       mxmlElementGetAttr(second, ind->attr))) != 0)
+      return (diff);
+  }
+
+ /*
+  * No difference, return 0...
+  */
+
+  return (0);
+}
+
+
+/*
+ * 'index_find()' - Compare a node with index values.
+ */
+
+static int				/* O - Result of comparison */
+index_find(mxml_index_t *ind,		/* I - Index */
+           const char   *element,	/* I - Element name or NULL */
+	   const char   *value,		/* I - Attribute value or NULL */
+           mxml_node_t  *node)		/* I - Node */
+{
+  int	diff;				/* Difference */
+
+
+ /*
+  * Check the element name...
+  */
+
+  if (element)
+  {
+    if ((diff = strcmp(element, node->value.element.name)) != 0)
+      return (diff);
+  }
+
+ /*
+  * Check the attribute value...
+  */
+
+  if (value)
+  {
+    if ((diff = strcmp(value, mxmlElementGetAttr(node, ind->attr))) != 0)
+      return (diff);
+  }
+
+ /*
+  * No difference, return 0...
+  */
+
+  return (0);
+}
+
+
+/*
+ * 'index_sort()' - Sort the nodes in the index...
+ *
+ * This function implements the classic quicksort algorithm...
+ */
+
+static void
+index_sort(mxml_index_t *ind,		/* I - Index to sort */
+           int          left,		/* I - Left node in partition */
+	   int          right)		/* I - Right node in partition */
+{
+  mxml_node_t	*pivot,			/* Pivot node */
+		*temp;			/* Swap node */
+  int		templ,			/* Temporary left node */
+		tempr;			/* Temporary right node */
+
+
+ /*
+  * Loop until we have sorted all the way to the right...
+  */
+
+  do
+  {
+   /*
+    * Sort the pivot in the current partition...
+    */
+
+    pivot = ind->nodes[left];
+
+    for (templ = left, tempr = right; templ < tempr;)
+    {
+     /*
+      * Move left while left node <= pivot node...
+      */
+
+      while ((templ < right) &&
+             index_compare(ind, ind->nodes[templ], pivot) <= 0)
+	templ ++;
+
+     /*
+      * Move right while right node > pivot node...
+      */
+
+      while ((tempr > left) &&
+             index_compare(ind, ind->nodes[tempr], pivot) > 0)
+	tempr --;
+
+     /*
+      * Swap nodes if needed...
+      */
+
+      if (templ < tempr)
+      {
+	temp              = ind->nodes[templ];
+	ind->nodes[templ] = ind->nodes[tempr];
+	ind->nodes[tempr] = temp;
+      }
+    }
+
+   /*
+    * When we get here, the right (tempr) node is the new position for the
+    * pivot node...
+    */
+
+    if (index_compare(ind, pivot, ind->nodes[tempr]) > 0)
+    {
+      ind->nodes[left]  = ind->nodes[tempr];
+      ind->nodes[tempr] = pivot;
+    }
+
+   /*
+    * Recursively sort the left partition as needed...
+    */
+
+    if (left < (tempr - 1))
+      index_sort(ind, left, tempr - 1);
+  }
+  while (right > (left = tempr + 1));
+}
+
+
+/*
+ * End of "$Id: mxml-index.c 22267 2006-04-24 17:11:45Z kpfleming $".
+ */

menuselect/mxml/mxml-node.c

@@ -0,0 +1,664 @@
+/*
+ * "$Id: mxml-node.c 22267 2006-04-24 17:11:45Z kpfleming $"
+ *
+ * Node support code for Mini-XML, a small XML-like file parsing library.
+ *
+ * Copyright 2003-2005 by Michael Sweet.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU Library General Public
+ * License as published by the Free Software Foundation; either
+ * version 2, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * Contents:
+ *
+ *   mxmlAdd()        - Add a node to a tree.
+ *   mxmlDelete()     - Delete a node and all of its children.
+ *   mxmlNewElement() - Create a new element node.
+ *   mxmlNewInteger() - Create a new integer node.
+ *   mxmlNewOpaque()  - Create a new opaque string.
+ *   mxmlNewReal()    - Create a new real number node.
+ *   mxmlNewText()    - Create a new text fragment node.
+ *   mxmlNewTextf()   - Create a new formatted text fragment node.
+ *   mxmlRemove()     - Remove a node from its parent.
+ *   mxml_new()       - Create a new node.
+ */
+
+/*
+ * Include necessary headers...
+ */
+
+#include "config.h"
+#include "mxml.h"
+
+
+/*
+ * Local functions...
+ */
+
+static mxml_node_t	*mxml_new(mxml_node_t *parent, mxml_type_t type);
+
+
+/*
+ * 'mxmlAdd()' - Add a node to a tree.
+ *
+ * Adds the specified node to the parent. If the child argument is not
+ * NULL, puts the new node before or after the specified child depending
+ * on the value of the where argument. If the child argument is NULL,
+ * puts the new node at the beginning of the child list (MXML_ADD_BEFORE)
+ * or at the end of the child list (MXML_ADD_AFTER). The constant
+ * MXML_ADD_TO_PARENT can be used to specify a NULL child pointer.
+ */
+
+void
+mxmlAdd(mxml_node_t *parent,		/* I - Parent node */
+        int         where,		/* I - Where to add, MXML_ADD_BEFORE or MXML_ADD_AFTER */
+        mxml_node_t *child,		/* I - Child node for where or MXML_ADD_TO_PARENT */
+	mxml_node_t *node)		/* I - Node to add */
+{
+#ifdef DEBUG
+  fprintf(stderr, "mxmlAdd(parent=%p, where=%d, child=%p, node=%p)\n", parent,
+          where, child, node);
+#endif /* DEBUG */
+
+ /*
+  * Range check input...
+  */
+
+  if (!parent || !node)
+    return;
+
+#if DEBUG > 1
+  fprintf(stderr, "    BEFORE: node->parent=%p\n", node->parent);
+  if (parent)
+  {
+    fprintf(stderr, "    BEFORE: parent->child=%p\n", parent->child);
+    fprintf(stderr, "    BEFORE: parent->last_child=%p\n", parent->last_child);
+    fprintf(stderr, "    BEFORE: parent->prev=%p\n", parent->prev);
+    fprintf(stderr, "    BEFORE: parent->next=%p\n", parent->next);
+  }
+#endif /* DEBUG > 1 */
+
+ /*
+  * Remove the node from any existing parent...
+  */
+
+  if (node->parent)
+    mxmlRemove(node);
+
+ /*
+  * Reset pointers...
+  */
+
+  node->parent = parent;
+
+  switch (where)
+  {
+    case MXML_ADD_BEFORE :
+        if (!child || child == parent->child || child->parent != parent)
+	{
+	 /*
+	  * Insert as first node under parent...
+	  */
+
+	  node->next = parent->child;
+
+	  if (parent->child)
+	    parent->child->prev = node;
+	  else
+	    parent->last_child = node;
+
+	  parent->child = node;
+	}
+	else
+	{
+	 /*
+	  * Insert node before this child...
+	  */
+
+	  node->next = child;
+	  node->prev = child->prev;
+
+	  if (child->prev)
+	    child->prev->next = node;
+	  else
+	    parent->child = node;
+
+	  child->prev = node;
+	}
+        break;
+
+    case MXML_ADD_AFTER :
+        if (!child || child == parent->last_child || child->parent != parent)
+	{
+	 /*
+	  * Insert as last node under parent...
+	  */
+
+	  node->parent = parent;
+	  node->prev   = parent->last_child;
+
+	  if (parent->last_child)
+	    parent->last_child->next = node;
+	  else
+	    parent->child = node;
+
+	  parent->last_child = node;
+        }
+	else
+	{
+	 /*
+	  * Insert node after this child...
+	  */
+
+	  node->prev = child;
+	  node->next = child->next;
+
+	  if (child->next)
+	    child->next->prev = node;
+	  else
+	    parent->last_child = node;
+
+	  child->next = node;
+	}
+        break;
+  }
+
+#if DEBUG > 1
+  fprintf(stderr, "    AFTER: node->parent=%p\n", node->parent);
+  if (parent)
+  {
+    fprintf(stderr, "    AFTER: parent->child=%p\n", parent->child);
+    fprintf(stderr, "    AFTER: parent->last_child=%p\n", parent->last_child);
+    fprintf(stderr, "    AFTER: parent->prev=%p\n", parent->prev);
+    fprintf(stderr, "    AFTER: parent->next=%p\n", parent->next);
+  }
+#endif /* DEBUG > 1 */
+}
+
+
+/*
+ * 'mxmlDelete()' - Delete a node and all of its children.
+ *
+ * If the specified node has a parent, this function first removes the
+ * node from its parent using the mxmlRemove() function.
+ */
+
+void
+mxmlDelete(mxml_node_t *node)		/* I - Node to delete */
+{
+  int	i;				/* Looping var */
+
+
+#ifdef DEBUG
+  fprintf(stderr, "mxmlDelete(node=%p)\n", node);
+#endif /* DEBUG */
+
+ /*
+  * Range check input...
+  */
+
+  if (!node)
+    return;
+
+ /*
+  * Remove the node from its parent, if any...
+  */
+
+  mxmlRemove(node);
+
+ /*
+  * Delete children...
+  */
+
+  while (node->child)
+    mxmlDelete(node->child);
+
+ /*
+  * Now delete any node data...
+  */
+
+  switch (node->type)
+  {
+    case MXML_ELEMENT :
+        if (node->value.element.name)
+	  free(node->value.element.name);
+
+	if (node->value.element.num_attrs)
+	{
+	  for (i = 0; i < node->value.element.num_attrs; i ++)
+	  {
+	    if (node->value.element.attrs[i].name)
+	      free(node->value.element.attrs[i].name);
+	    if (node->value.element.attrs[i].value)
+	      free(node->value.element.attrs[i].value);
+	  }
+
+          free(node->value.element.attrs);
+	}
+        break;
+    case MXML_INTEGER :
+       /* Nothing to do */
+        break;
+    case MXML_OPAQUE :
+        if (node->value.opaque)
+	  free(node->value.opaque);
+        break;
+    case MXML_REAL :
+       /* Nothing to do */
+        break;
+    case MXML_TEXT :
+        if (node->value.text.string)
+	  free(node->value.text.string);
+        break;
+    case MXML_CUSTOM :
+        if (node->value.custom.data &&
+	    node->value.custom.destroy)
+	  (*(node->value.custom.destroy))(node->value.custom.data);
+	break;
+  }
+
+ /*
+  * Free this node...
+  */
+
+  free(node);
+}
+
+
+/*
+ * 'mxmlNewCustom()' - Create a new custom data node.
+ *
+ * The new custom node is added to the end of the specified parent's child
+ * list. The constant MXML_NO_PARENT can be used to specify that the new
+ * element node has no parent. NULL can be passed when the data in the
+ * node is not dynamically allocated or is separately managed.
+ */
+
+mxml_node_t *				/* O - New node */
+mxmlNewCustom(mxml_node_t *parent,	/* I - Parent node or MXML_NO_PARENT */
+              void        *data,	/* I - Pointer to data */
+	      void        (*destroy)(void *))
+					/* I - Function to destroy data */
+{
+  mxml_node_t	*node;			/* New node */
+
+
+#ifdef DEBUG
+  fprintf(stderr, "mxmlNewCustom(parent=%p, data=%p, destroy=%p)\n", parent,
+          data, destroy);
+#endif /* DEBUG */
+
+ /*
+  * Create the node and set the value...
+  */
+
+  if ((node = mxml_new(parent, MXML_CUSTOM)) != NULL)
+  {
+    node->value.custom.data    = data;
+    node->value.custom.destroy = destroy;
+  }
+
+  return (node);
+}
+
+
+/*
+ * 'mxmlNewElement()' - Create a new element node.
+ *
+ * The new element node is added to the end of the specified parent's child
+ * list. The constant MXML_NO_PARENT can be used to specify that the new
+ * element node has no parent.
+ */
+
+mxml_node_t *				/* O - New node */
+mxmlNewElement(mxml_node_t *parent,	/* I - Parent node or MXML_NO_PARENT */
+               const char  *name)	/* I - Name of element */
+{
+  mxml_node_t	*node;			/* New node */
+
+
+#ifdef DEBUG
+  fprintf(stderr, "mxmlNewElement(parent=%p, name=\"%s\")\n", parent,
+          name ? name : "(null)");
+#endif /* DEBUG */
+
+ /*
+  * Range check input...
+  */
+
+  if (!name)
+    return (NULL);
+
+ /*
+  * Create the node and set the element name...
+  */
+
+  if ((node = mxml_new(parent, MXML_ELEMENT)) != NULL)
+    node->value.element.name = strdup(name);
+
+  return (node);
+}
+
+
+/*
+ * 'mxmlNewInteger()' - Create a new integer node.
+ *
+ * The new integer node is added to the end of the specified parent's child
+ * list. The constant MXML_NO_PARENT can be used to specify that the new
+ * integer node has no parent.
+ */
+
+mxml_node_t *				/* O - New node */
+mxmlNewInteger(mxml_node_t *parent,	/* I - Parent node or MXML_NO_PARENT */
+               int         integer)	/* I - Integer value */
+{
+  mxml_node_t	*node;			/* New node */
+
+
+#ifdef DEBUG
+  fprintf(stderr, "mxmlNewInteger(parent=%p, integer=%d)\n", parent, integer);
+#endif /* DEBUG */
+
+ /*
+  * Create the node and set the element name...
+  */
+
+  if ((node = mxml_new(parent, MXML_INTEGER)) != NULL)
+    node->value.integer = integer;
+
+  return (node);
+}
+
+
+/*
+ * 'mxmlNewOpaque()' - Create a new opaque string.
+ *
+ * The new opaque node is added to the end of the specified parent's child
+ * list. The constant MXML_NO_PARENT can be used to specify that the new
+ * opaque node has no parent. The opaque string must be nul-terminated and
+ * is copied into the new node.
+ */
+
+mxml_node_t *				/* O - New node */
+mxmlNewOpaque(mxml_node_t *parent,	/* I - Parent node or MXML_NO_PARENT */
+              const char  *opaque)	/* I - Opaque string */
+{
+  mxml_node_t	*node;			/* New node */
+
+
+#ifdef DEBUG
+  fprintf(stderr, "mxmlNewOpaque(parent=%p, opaque=\"%s\")\n", parent,
+          opaque ? opaque : "(null)");
+#endif /* DEBUG */
+
+ /*
+  * Range check input...
+  */
+
+  if (!opaque)
+    return (NULL);
+
+ /*
+  * Create the node and set the element name...
+  */
+
+  if ((node = mxml_new(parent, MXML_OPAQUE)) != NULL)
+    node->value.opaque = strdup(opaque);
+
+  return (node);
+}
+
+
+/*
+ * 'mxmlNewReal()' - Create a new real number node.
+ *
+ * The new real number node is added to the end of the specified parent's
+ * child list. The constant MXML_NO_PARENT can be used to specify that
+ * the new real number node has no parent.
+ */
+
+mxml_node_t *				/* O - New node */
+mxmlNewReal(mxml_node_t *parent,	/* I - Parent node or MXML_NO_PARENT */
+            double      real)		/* I - Real number value */
+{
+  mxml_node_t	*node;			/* New node */
+
+
+#ifdef DEBUG
+  fprintf(stderr, "mxmlNewReal(parent=%p, real=%g)\n", parent, real);
+#endif /* DEBUG */
+
+ /*
+  * Create the node and set the element name...
+  */
+
+  if ((node = mxml_new(parent, MXML_REAL)) != NULL)
+    node->value.real = real;
+
+  return (node);
+}
+
+
+/*
+ * 'mxmlNewText()' - Create a new text fragment node.
+ *
+ * The new text node is added to the end of the specified parent's child
+ * list. The constant MXML_NO_PARENT can be used to specify that the new
+ * text node has no parent. The whitespace parameter is used to specify
+ * whether leading whitespace is present before the node. The text
+ * string must be nul-terminated and is copied into the new node.  
+ */
+
+mxml_node_t *				/* O - New node */
+mxmlNewText(mxml_node_t *parent,	/* I - Parent node or MXML_NO_PARENT */
+            int         whitespace,	/* I - 1 = leading whitespace, 0 = no whitespace */
+	    const char  *string)	/* I - String */
+{
+  mxml_node_t	*node;			/* New node */
+
+
+#ifdef DEBUG
+  fprintf(stderr, "mxmlNewText(parent=%p, whitespace=%d, string=\"%s\")\n",
+          parent, whitespace, string ? string : "(null)");
+#endif /* DEBUG */
+
+ /*
+  * Range check input...
+  */
+
+  if (!string)
+    return (NULL);
+
+ /*
+  * Create the node and set the text value...
+  */
+
+  if ((node = mxml_new(parent, MXML_TEXT)) != NULL)
+  {
+    node->value.text.whitespace = whitespace;
+    node->value.text.string     = strdup(string);
+  }
+
+  return (node);
+}
+
+
+/*
+ * 'mxmlNewTextf()' - Create a new formatted text fragment node.
+ *
+ * The new text node is added to the end of the specified parent's child
+ * list. The constant MXML_NO_PARENT can be used to specify that the new
+ * text node has no parent. The whitespace parameter is used to specify
+ * whether leading whitespace is present before the node. The format
+ * string must be nul-terminated and is formatted into the new node.  
+ */
+
+mxml_node_t *				/* O - New node */
+mxmlNewTextf(mxml_node_t *parent,	/* I - Parent node or MXML_NO_PARENT */
+             int         whitespace,	/* I - 1 = leading whitespace, 0 = no whitespace */
+	     const char  *format,	/* I - Printf-style frmat string */
+	     ...)			/* I - Additional args as needed */
+{
+  mxml_node_t	*node;			/* New node */
+  va_list	ap;			/* Pointer to arguments */
+
+
+#ifdef DEBUG
+  fprintf(stderr, "mxmlNewTextf(parent=%p, whitespace=%d, format=\"%s\", ...)\n",
+          parent, whitespace, format ? format : "(null)");
+#endif /* DEBUG */
+
+ /*
+  * Range check input...
+  */
+
+  if (!format)
+    return (NULL);
+
+ /*
+  * Create the node and set the text value...
+  */
+
+  if ((node = mxml_new(parent, MXML_TEXT)) != NULL)
+  {
+    va_start(ap, format);
+
+    node->value.text.whitespace = whitespace;
+    node->value.text.string     = mxml_strdupf(format, ap);
+
+    va_end(ap);
+  }
+
+  return (node);
+}
+
+
+/*
+ * 'mxmlRemove()' - Remove a node from its parent.
+ *
+ * Does not free memory used by the node - use mxmlDelete() for that.
+ * This function does nothing if the node has no parent.
+ */
+
+void
+mxmlRemove(mxml_node_t *node)		/* I - Node to remove */
+{
+#ifdef DEBUG
+  fprintf(stderr, "mxmlRemove(node=%p)\n", node);
+#endif /* DEBUG */
+
+ /*
+  * Range check input...
+  */
+
+  if (!node || !node->parent)
+    return;
+
+ /*
+  * Remove from parent...
+  */
+
+#if DEBUG > 1
+  fprintf(stderr, "    BEFORE: node->parent=%p\n", node->parent);
+  if (node->parent)
+  {
+    fprintf(stderr, "    BEFORE: node->parent->child=%p\n", node->parent->child);
+    fprintf(stderr, "    BEFORE: node->parent->last_child=%p\n", node->parent->last_child);
+  }
+  fprintf(stderr, "    BEFORE: node->child=%p\n", node->child);
+  fprintf(stderr, "    BEFORE: node->last_child=%p\n", node->last_child);
+  fprintf(stderr, "    BEFORE: node->prev=%p\n", node->prev);
+  fprintf(stderr, "    BEFORE: node->next=%p\n", node->next);
+#endif /* DEBUG > 1 */
+
+  if (node->prev)
+    node->prev->next = node->next;
+  else
+    node->parent->child = node->next;
+
+  if (node->next)
+    node->next->prev = node->prev;
+  else
+    node->parent->last_child = node->prev;
+
+  node->parent = NULL;
+  node->prev   = NULL;
+  node->next   = NULL;
+
+#if DEBUG > 1
+  fprintf(stderr, "    AFTER: node->parent=%p\n", node->parent);
+  if (node->parent)
+  {
+    fprintf(stderr, "    AFTER: node->parent->child=%p\n", node->parent->child);
+    fprintf(stderr, "    AFTER: node->parent->last_child=%p\n", node->parent->last_child);
+  }
+  fprintf(stderr, "    AFTER: node->child=%p\n", node->child);
+  fprintf(stderr, "    AFTER: node->last_child=%p\n", node->last_child);
+  fprintf(stderr, "    AFTER: node->prev=%p\n", node->prev);
+  fprintf(stderr, "    AFTER: node->next=%p\n", node->next);
+#endif /* DEBUG > 1 */
+}
+
+
+/*
+ * 'mxml_new()' - Create a new node.
+ */
+
+static mxml_node_t *			/* O - New node */
+mxml_new(mxml_node_t *parent,		/* I - Parent node */
+         mxml_type_t type)		/* I - Node type */
+{
+  mxml_node_t	*node;			/* New node */
+
+
+#if DEBUG > 1
+  fprintf(stderr, "mxml_new(parent=%p, type=%d)\n", parent, type);
+#endif /* DEBUG > 1 */
+
+ /*
+  * Allocate memory for the node...
+  */
+
+  if ((node = calloc(1, sizeof(mxml_node_t))) == NULL)
+  {
+#if DEBUG > 1
+    fputs("    returning NULL\n", stderr);
+#endif /* DEBUG > 1 */
+
+    return (NULL);
+  }
+
+#if DEBUG > 1
+  fprintf(stderr, "    returning %p\n", node);
+#endif /* DEBUG > 1 */
+
+ /*
+  * Set the node type...
+  */
+
+  node->type = type;
+
+ /*
+  * Add to the parent if present...
+  */
+
+  if (parent)
+    mxmlAdd(parent, MXML_ADD_AFTER, MXML_ADD_TO_PARENT, node);
+
+ /*
+  * Return the new node...
+  */
+
+  return (node);
+}
+
+
+/*
+ * End of "$Id: mxml-node.c 22267 2006-04-24 17:11:45Z kpfleming $".
+ */

menuselect/mxml/mxml-private.c

@@ -0,0 +1,128 @@
+/*
+ * "$Id: mxml-private.c 22267 2006-04-24 17:11:45Z kpfleming $"
+ *
+ * Private functions for Mini-XML, a small XML-like file parsing library.
+ *
+ * Copyright 2003-2005 by Michael Sweet.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU Library General Public
+ * License as published by the Free Software Foundation; either
+ * version 2, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * Contents:
+ *
+ *   mxml_error()      - Display an error message.
+ *   mxml_integer_cb() - Default callback for integer values.
+ *   mxml_opaque_cb()  - Default callback for opaque values.
+ *   mxml_real_cb()    - Default callback for real number values.
+ */
+
+/*
+ * Include necessary headers...
+ */
+
+#include "config.h"
+#include "mxml.h"
+
+
+/*
+ * Error callback function...
+ */
+
+void	(*mxml_error_cb)(const char *) = NULL;
+
+
+/*
+ * 'mxml_error()' - Display an error message.
+ */
+
+void
+mxml_error(const char *format,		/* I - Printf-style format string */
+           ...)				/* I - Additional arguments as needed */
+{
+  va_list	ap;			/* Pointer to arguments */
+  char		*s;			/* Message string */
+
+
+ /*
+  * Range check input...
+  */
+
+  if (!format)
+    return;
+
+ /*
+  * Format the error message string...
+  */
+
+  va_start(ap, format);
+
+  s = mxml_strdupf(format, ap);
+
+  va_end(ap);
+
+ /*
+  * And then display the error message...
+  */
+
+  if (mxml_error_cb)
+    (*mxml_error_cb)(s);
+  else
+    fprintf(stderr, "mxml: %s\n", s);
+
+ /*
+  * Free the string...
+  */
+
+  free(s);
+}
+
+
+/*
+ * 'mxml_integer_cb()' - Default callback for integer values.
+ */
+
+mxml_type_t				/* O - Node type */
+mxml_integer_cb(mxml_node_t *node)	/* I - Current node */
+{
+  (void)node;
+
+  return (MXML_INTEGER);
+}
+
+
+/*
+ * 'mxml_opaque_cb()' - Default callback for opaque values.
+ */
+
+mxml_type_t				/* O - Node type */
+mxml_opaque_cb(mxml_node_t *node)	/* I - Current node */
+{
+  (void)node;
+
+  return (MXML_OPAQUE);
+}
+
+
+/*
+ * 'mxml_real_cb()' - Default callback for real number values.
+ */
+
+mxml_type_t				/* O - Node type */
+mxml_real_cb(mxml_node_t *node)		/* I - Current node */
+{
+  (void)node;
+
+  return (MXML_REAL);
+}
+
+
+/*
+ * End of "$Id: mxml-private.c 22267 2006-04-24 17:11:45Z kpfleming $".
+ */

menuselect/mxml/mxml-search.c

@@ -0,0 +1,199 @@
+/*
+ * "$Id: mxml-search.c 22267 2006-04-24 17:11:45Z kpfleming $"
+ *
+ * Search/navigation functions for Mini-XML, a small XML-like file
+ * parsing library.
+ *
+ * Copyright 2003-2005 by Michael Sweet.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU Library General Public
+ * License as published by the Free Software Foundation; either
+ * version 2, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * Contents:
+ *
+ *   mxmlFindElement() - Find the named element.
+ *   mxmlWalkNext()    - Walk to the next logical node in the tree.
+ *   mxmlWalkPrev()    - Walk to the previous logical node in the tree.
+ */
+
+/*
+ * Include necessary headers...
+ */
+
+#include "config.h"
+#include "mxml.h"
+
+
+/*
+ * 'mxmlFindElement()' - Find the named element.
+ *
+ * The search is constrained by the name, attribute name, and value; any
+ * NULL names or values are treated as wildcards, so different kinds of
+ * searches can be implemented by looking for all elements of a given name
+ * or all elements with a specific attribute. The descend argument determines
+ * whether the search descends into child nodes; normally you will use
+ * MXML_DESCEND_FIRST for the initial search and MXML_NO_DESCEND to find
+ * additional direct descendents of the node. The top node argument
+ * constrains the search to a particular node's children.
+ */
+
+mxml_node_t *				/* O - Element node or NULL */
+mxmlFindElement(mxml_node_t *node,	/* I - Current node */
+                mxml_node_t *top,	/* I - Top node */
+                const char  *name,	/* I - Element name or NULL for any */
+		const char  *attr,	/* I - Attribute name, or NULL for none */
+		const char  *value,	/* I - Attribute value, or NULL for any */
+		int         descend)	/* I - Descend into tree - MXML_DESCEND, MXML_NO_DESCEND, or MXML_DESCEND_FIRST */
+{
+  const char	*temp;			/* Current attribute value */
+
+
+ /*
+  * Range check input...
+  */
+
+  if (!node || !top || (!attr && value))
+    return (NULL);
+
+ /*
+  * Start with the next node...
+  */
+
+  node = mxmlWalkNext(node, top, descend);
+
+ /*
+  * Loop until we find a matching element...
+  */
+
+  while (node != NULL)
+  {
+   /*
+    * See if this node matches...
+    */
+
+    if (node->type == MXML_ELEMENT &&
+        node->value.element.name &&
+	(!name || !strcmp(node->value.element.name, name)))
+    {
+     /*
+      * See if we need to check for an attribute...
+      */
+
+      if (!attr)
+        return (node);			/* No attribute search, return it... */
+
+     /*
+      * Check for the attribute...
+      */
+
+      if ((temp = mxmlElementGetAttr(node, attr)) != NULL)
+      {
+       /*
+        * OK, we have the attribute, does it match?
+	*/
+
+	if (!value || !strcmp(value, temp))
+	  return (node);		/* Yes, return it... */
+      }
+    }
+
+   /*
+    * No match, move on to the next node...
+    */
+
+    if (descend == MXML_DESCEND)
+      node = mxmlWalkNext(node, top, MXML_DESCEND);
+    else
+      node = node->next;
+  }
+
+  return (NULL);
+}
+
+
+/*
+ * 'mxmlWalkNext()' - Walk to the next logical node in the tree.
+ *
+ * The descend argument controls whether the first child is considered
+ * to be the next node. The top node argument constrains the walk to
+ * the node's children.
+ */
+
+mxml_node_t *				/* O - Next node or NULL */
+mxmlWalkNext(mxml_node_t *node,		/* I - Current node */
+             mxml_node_t *top,		/* I - Top node */
+             int         descend)	/* I - Descend into tree - MXML_DESCEND, MXML_NO_DESCEND, or MXML_DESCEND_FIRST */
+{
+  if (!node)
+    return (NULL);
+  else if (node->child && descend)
+    return (node->child);
+  else if (node->next)
+    return (node->next);
+  else if (node->parent && node->parent != top)
+  {
+    node = node->parent;
+
+    while (!node->next)
+      if (node->parent == top || !node->parent)
+        return (NULL);
+      else
+        node = node->parent;
+
+    return (node->next);
+  }
+  else
+    return (NULL);
+}
+
+
+/*
+ * 'mxmlWalkPrev()' - Walk to the previous logical node in the tree.
+ *
+ * The descend argument controls whether the previous node's last child
+ * is considered to be the previous node. The top node argument constrains
+ * the walk to the node's children.
+ */
+
+mxml_node_t *				/* O - Previous node or NULL */
+mxmlWalkPrev(mxml_node_t *node,		/* I - Current node */
+             mxml_node_t *top,		/* I - Top node */
+             int         descend)	/* I - Descend into tree - MXML_DESCEND, MXML_NO_DESCEND, or MXML_DESCEND_FIRST */
+{
+  if (!node)
+    return (NULL);
+  else if (node->prev)
+  {
+    if (node->prev->last_child && descend)
+    {
+     /*
+      * Find the last child under the previous node...
+      */
+
+      node = node->prev->last_child;
+
+      while (node->last_child)
+        node = node->last_child;
+
+      return (node);
+    }
+    else
+      return (node->prev);
+  }
+  else if (node->parent != top)
+    return (node->parent);
+  else
+    return (NULL);
+}
+
+
+/*
+ * End of "$Id: mxml-search.c 22267 2006-04-24 17:11:45Z kpfleming $".
+ */

menuselect/mxml/mxml-set.c

@@ -0,0 +1,257 @@
+/*
+ * "$Id: mxml-set.c 22267 2006-04-24 17:11:45Z kpfleming $"
+ *
+ * Node set functions for Mini-XML, a small XML-like file parsing library.
+ *
+ * Copyright 2003-2005 by Michael Sweet.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU Library General Public
+ * License as published by the Free Software Foundation; either
+ * version 2, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * Contents:
+ *
+ *   mxmlSetElement() - Set the name of an element node.
+ *   mxmlSetInteger() - Set the value of an integer node.
+ *   mxmlSetOpaque()  - Set the value of an opaque node.
+ *   mxmlSetReal()    - Set the value of a real number node.
+ *   mxmlSetText()    - Set the value of a text node.
+ *   mxmlSetTextf()   - Set the value of a text node to a formatted string.
+ */
+
+/*
+ * Include necessary headers...
+ */
+
+#include "config.h"
+#include "mxml.h"
+
+
+/*
+ * 'mxmlSetCustom()' - Set the data and destructor of a custom data node.
+ *
+ * The node is not changed if it is not a custom node.
+ */
+
+int					/* O - 0 on success, -1 on failure */
+mxmlSetCustom(mxml_node_t *node,	/* I - Node to set */
+              void        *data,	/* I - New data pointer */
+	      void        (*destroy)(void *))
+					/* I - New destructor function */
+{
+ /*
+  * Range check input...
+  */
+
+  if (!node || node->type != MXML_CUSTOM)
+    return (-1);
+
+ /*
+  * Free any old element value and set the new value...
+  */
+
+  if (node->value.custom.data && node->value.custom.destroy)
+    (*(node->value.custom.destroy))(node->value.custom.data);
+
+  node->value.custom.data    = data;
+  node->value.custom.destroy = destroy;
+
+  return (0);
+}
+
+
+/*
+ * 'mxmlSetElement()' - Set the name of an element node.
+ *
+ * The node is not changed if it is not an element node.
+ */
+
+int					/* O - 0 on success, -1 on failure */
+mxmlSetElement(mxml_node_t *node,	/* I - Node to set */
+               const char  *name)	/* I - New name string */
+{
+ /*
+  * Range check input...
+  */
+
+  if (!node || node->type != MXML_ELEMENT || !name)
+    return (-1);
+
+ /*
+  * Free any old element value and set the new value...
+  */
+
+  if (node->value.element.name)
+    free(node->value.element.name);
+
+  node->value.element.name = strdup(name);
+
+  return (0);
+}
+
+
+/*
+ * 'mxmlSetInteger()' - Set the value of an integer node.
+ *
+ * The node is not changed if it is not an integer node.
+ */
+
+int					/* O - 0 on success, -1 on failure */
+mxmlSetInteger(mxml_node_t *node,	/* I - Node to set */
+               int         integer)	/* I - Integer value */
+{
+ /*
+  * Range check input...
+  */
+
+  if (!node || node->type != MXML_INTEGER)
+    return (-1);
+
+ /*
+  * Set the new value and return...
+  */
+
+  node->value.integer = integer;
+
+  return (0);
+}
+
+
+/*
+ * 'mxmlSetOpaque()' - Set the value of an opaque node.
+ *
+ * The node is not changed if it is not an opaque node.
+ */
+
+int					/* O - 0 on success, -1 on failure */
+mxmlSetOpaque(mxml_node_t *node,	/* I - Node to set */
+              const char  *opaque)	/* I - Opaque string */
+{
+ /*
+  * Range check input...
+  */
+
+  if (!node || node->type != MXML_OPAQUE || !opaque)
+    return (-1);
+
+ /*
+  * Free any old opaque value and set the new value...
+  */
+
+  if (node->value.opaque)
+    free(node->value.opaque);
+
+  node->value.opaque = strdup(opaque);
+
+  return (0);
+}
+
+
+/*
+ * 'mxmlSetReal()' - Set the value of a real number node.
+ *
+ * The node is not changed if it is not a real number node.
+ */
+
+int					/* O - 0 on success, -1 on failure */
+mxmlSetReal(mxml_node_t *node,		/* I - Node to set */
+            double      real)		/* I - Real number value */
+{
+ /*
+  * Range check input...
+  */
+
+  if (!node || node->type != MXML_REAL)
+    return (-1);
+
+ /*
+  * Set the new value and return...
+  */
+
+  node->value.real = real;
+
+  return (0);
+}
+
+
+/*
+ * 'mxmlSetText()' - Set the value of a text node.
+ *
+ * The node is not changed if it is not a text node.
+ */
+
+int					/* O - 0 on success, -1 on failure */
+mxmlSetText(mxml_node_t *node,		/* I - Node to set */
+            int         whitespace,	/* I - 1 = leading whitespace, 0 = no whitespace */
+	    const char  *string)	/* I - String */
+{
+ /*
+  * Range check input...
+  */
+
+  if (!node || node->type != MXML_TEXT || !string)
+    return (-1);
+
+ /*
+  * Free any old string value and set the new value...
+  */
+
+  if (node->value.text.string)
+    free(node->value.text.string);
+
+  node->value.text.whitespace = whitespace;
+  node->value.text.string     = strdup(string);
+
+  return (0);
+}
+
+
+/*
+ * 'mxmlSetTextf()' - Set the value of a text node to a formatted string.
+ *
+ * The node is not changed if it is not a text node.
+ */
+
+int					/* O - 0 on success, -1 on failure */
+mxmlSetTextf(mxml_node_t *node,		/* I - Node to set */
+             int         whitespace,	/* I - 1 = leading whitespace, 0 = no whitespace */
+             const char  *format,	/* I - Printf-style format string */
+	     ...)			/* I - Additional arguments as needed */
+{
+  va_list	ap;			/* Pointer to arguments */
+
+
+ /*
+  * Range check input...
+  */
+
+  if (!node || node->type != MXML_TEXT || !format)
+    return (-1);
+
+ /*
+  * Free any old string value and set the new value...
+  */
+
+  if (node->value.text.string)
+    free(node->value.text.string);
+
+  va_start(ap, format);
+
+  node->value.text.whitespace = whitespace;
+  node->value.text.string     = mxml_strdupf(format, ap);
+
+  va_end(ap);
+
+  return (0);
+}
+
+
+/*
+ * End of "$Id: mxml-set.c 22267 2006-04-24 17:11:45Z kpfleming $".
+ */

menuselect/mxml/mxml-string.c

@@ -0,0 +1,377 @@
+/*
+ * "$Id: mxml-string.c 22267 2006-04-24 17:11:45Z kpfleming $"
+ *
+ * String functions for Mini-XML, a small XML-like file parsing library.
+ *
+ * Copyright 2003-2005 by Michael Sweet.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU Library General Public
+ * License as published by the Free Software Foundation; either
+ * version 2, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * Contents:
+ *
+ *   mxml_strdup()    - Duplicate a string.
+ *   mxml_strdupf()   - Format and duplicate a string.
+ *   mxml_vsnprintf() - Format a string into a fixed size buffer.
+ */
+
+/*
+ * Include necessary headers...
+ */
+
+#include "config.h"
+
+
+/*
+ * 'mxml_strdup()' - Duplicate a string.
+ */
+
+#ifndef HAVE_STRDUP
+char 	*				/* O - New string pointer */
+mxml_strdup(const char *s)		/* I - String to duplicate */
+{
+  char	*t;				/* New string pointer */
+
+
+  if (s == NULL)
+    return (NULL);
+
+  if ((t = malloc(strlen(s) + 1)) == NULL)
+    return (NULL);
+
+  return (strcpy(t, s));
+}
+#endif /* !HAVE_STRDUP */
+
+
+/*
+ * 'mxml_strdupf()' - Format and duplicate a string.
+ */
+
+char *					/* O - New string pointer */
+mxml_strdupf(const char *format,	/* I - Printf-style format string */
+             va_list    ap)		/* I - Pointer to additional arguments */
+{
+  int	bytes;				/* Number of bytes required */
+  char	*buffer,			/* String buffer */
+	temp[256];			/* Small buffer for first vsnprintf */
+
+
+ /*
+  * First format with a tiny buffer; this will tell us how many bytes are
+  * needed...
+  */
+
+  bytes = vsnprintf(temp, sizeof(temp), format, ap);
+
+  if (bytes < sizeof(temp))
+  {
+   /*
+    * Hey, the formatted string fits in the tiny buffer, so just dup that...
+    */
+
+    return (strdup(temp));
+  }
+
+ /*
+  * Allocate memory for the whole thing and reformat to the new, larger
+  * buffer...
+  */
+
+  if ((buffer = calloc(1, bytes + 1)) != NULL)
+    vsnprintf(buffer, bytes + 1, format, ap);
+
+ /*
+  * Return the new string...
+  */
+
+  return (buffer);
+}
+
+
+#ifndef HAVE_VSNPRINTF
+/*
+ * 'mxml_vsnprintf()' - Format a string into a fixed size buffer.
+ */
+
+int					/* O - Number of bytes formatted */
+mxml_vsnprintf(char       *buffer,	/* O - Output buffer */
+               size_t     bufsize,	/* O - Size of output buffer */
+	       const char *format,	/* I - Printf-style format string */
+	       va_list    ap)		/* I - Pointer to additional arguments */
+{
+  char		*bufptr,		/* Pointer to position in buffer */
+		*bufend,		/* Pointer to end of buffer */
+		sign,			/* Sign of format width */
+		size,			/* Size character (h, l, L) */
+		type;			/* Format type character */
+  const char	*bufformat;		/* Start of format */
+  int		width,			/* Width of field */
+		prec;			/* Number of characters of precision */
+  char		tformat[100],		/* Temporary format string for sprintf() */
+		temp[1024];		/* Buffer for formatted numbers */
+  char		*s;			/* Pointer to string */
+  int		slen;			/* Length of string */
+  int		bytes;			/* Total number of bytes needed */
+
+
+ /*
+  * Loop through the format string, formatting as needed...
+  */
+
+  bufptr = buffer;
+  bufend = buffer + bufsize - 1;
+  bytes  = 0;
+
+  while (*format)
+  {
+    if (*format == '%')
+    {
+      bufformat = format;
+      format ++;
+
+      if (*format == '%')
+      {
+        *bufptr++ = *format++;
+	continue;
+      }
+      else if (strchr(" -+#\'", *format))
+        sign = *format++;
+      else
+        sign = 0;
+
+      width = 0;
+      while (isdigit(*format))
+        width = width * 10 + *format++ - '0';
+
+      if (*format == '.')
+      {
+        format ++;
+	prec = 0;
+
+	while (isdigit(*format))
+          prec = prec * 10 + *format++ - '0';
+      }
+      else
+        prec = -1;
+
+      if (*format == 'l' && format[1] == 'l')
+      {
+        size = 'L';
+	format += 2;
+      }
+      else if (*format == 'h' || *format == 'l' || *format == 'L')
+        size = *format++;
+
+      if (!*format)
+        break;
+
+      type = *format++;
+
+      switch (type)
+      {
+	case 'E' : /* Floating point formats */
+	case 'G' :
+	case 'e' :
+	case 'f' :
+	case 'g' :
+	    if ((format - bufformat + 1) > sizeof(tformat) ||
+	        (width + 2) > sizeof(temp))
+	      break;
+
+	    strncpy(tformat, bufformat, format - bufformat);
+	    tformat[format - bufformat] = '\0';
+
+	    sprintf(temp, tformat, va_arg(ap, double));
+
+            bytes += strlen(temp);
+
+            if (bufptr)
+	    {
+	      if ((bufptr + strlen(temp)) > bufend)
+	      {
+		strncpy(bufptr, temp, bufend - bufptr);
+		bufptr = bufend;
+		break;
+	      }
+	      else
+	      {
+		strcpy(bufptr, temp);
+		bufptr += strlen(temp);
+	      }
+	    }
+	    break;
+
+        case 'B' : /* Integer formats */
+	case 'X' :
+	case 'b' :
+        case 'd' :
+	case 'i' :
+	case 'o' :
+	case 'u' :
+	case 'x' :
+	    if ((format - bufformat + 1) > sizeof(tformat) ||
+	        (width + 2) > sizeof(temp))
+	      break;
+
+	    strncpy(tformat, bufformat, format - bufformat);
+	    tformat[format - bufformat] = '\0';
+
+	    sprintf(temp, tformat, va_arg(ap, int));
+
+            bytes += strlen(temp);
+
+	    if (bufptr)
+	    {
+	      if ((bufptr + strlen(temp)) > bufend)
+	      {
+		strncpy(bufptr, temp, bufend - bufptr);
+		bufptr = bufend;
+		break;
+	      }
+	      else
+	      {
+		strcpy(bufptr, temp);
+		bufptr += strlen(temp);
+	      }
+	    }
+	    break;
+	    
+	case 'p' : /* Pointer value */
+	    if ((format - bufformat + 1) > sizeof(tformat) ||
+	        (width + 2) > sizeof(temp))
+	      break;
+
+	    strncpy(tformat, bufformat, format - bufformat);
+	    tformat[format - bufformat] = '\0';
+
+	    sprintf(temp, tformat, va_arg(ap, void *));
+
+            bytes += strlen(temp);
+
+	    if (bufptr)
+	    {
+	      if ((bufptr + strlen(temp)) > bufend)
+	      {
+		strncpy(bufptr, temp, bufend - bufptr);
+		bufptr = bufend;
+		break;
+	      }
+	      else
+	      {
+		strcpy(bufptr, temp);
+		bufptr += strlen(temp);
+	      }
+	    }
+	    break;
+
+        case 'c' : /* Character or character array */
+	    bytes += width;
+
+	    if (bufptr)
+	    {
+	      if (width <= 1)
+		*bufptr++ = va_arg(ap, int);
+	      else
+	      {
+		if ((bufptr + width) > bufend)
+	          width = bufend - bufptr;
+
+		memcpy(bufptr, va_arg(ap, char *), width);
+		bufptr += width;
+	      }
+	    }
+	    break;
+
+	case 's' : /* String */
+	    if ((s = va_arg(ap, char *)) == NULL)
+	      s = "(null)";
+
+	    slen = strlen(s);
+	    if (slen > width && prec != width)
+	      width = slen;
+
+            bytes += width;
+
+	    if (bufptr)
+	    {
+	      if ((bufptr + width) > bufend)
+		width = bufend - bufptr;
+
+              if (slen > width)
+		slen = width;
+
+	      if (sign == '-')
+	      {
+		strncpy(bufptr, s, slen);
+		memset(bufptr + slen, ' ', width - slen);
+	      }
+	      else
+	      {
+		memset(bufptr, ' ', width - slen);
+		strncpy(bufptr + width - slen, s, slen);
+	      }
+
+	      bufptr += width;
+	    }
+	    break;
+
+	case 'n' : /* Output number of chars so far */
+	    if ((format - bufformat + 1) > sizeof(tformat) ||
+	        (width + 2) > sizeof(temp))
+	      break;
+
+	    strncpy(tformat, bufformat, format - bufformat);
+	    tformat[format - bufformat] = '\0';
+
+	    sprintf(temp, tformat, va_arg(ap, int));
+
+            bytes += strlen(temp);
+
+	    if (bufptr)
+	    {
+	      if ((bufptr + strlen(temp)) > bufend)
+	      {
+		strncpy(bufptr, temp, bufend - bufptr);
+		bufptr = bufend;
+		break;
+	      }
+	      else
+	      {
+		strcpy(bufptr, temp);
+		bufptr += strlen(temp);
+	      }
+	    }
+	    break;
+      }
+    }
+    else
+    {
+      bytes ++;
+
+      if (bufptr && bufptr < bufend)
+	*bufptr++ = *format++;
+    }
+  }
+
+ /*
+  * Nul-terminate the string and return the number of characters needed.
+  */
+
+  *bufptr = '\0';
+
+  return (bytes);
+}
+#endif /* !HAVE_VSNPRINTF */
+
+
+/*
+ * End of "$Id: mxml-string.c 22267 2006-04-24 17:11:45Z kpfleming $".
+ */

menuselect/mxml/mxml.h

@@ -0,0 +1,254 @@
+/*
+ * "$Id: mxml.h 22267 2006-04-24 17:11:45Z kpfleming $"
+ *
+ * Header file for Mini-XML, a small XML-like file parsing library.
+ *
+ * Copyright 2003-2005 by Michael Sweet.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU Library General Public
+ * License as published by the Free Software Foundation; either
+ * version 2, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ */
+
+/*
+ * Prevent multiple inclusion...
+ */
+
+#ifndef _mxml_h_
+#  define _mxml_h_
+
+/*
+ * Include necessary headers...
+ */
+
+#  include <stdio.h>
+#  include <stdlib.h>
+#  include <string.h>
+#  include <ctype.h>
+#  include <errno.h>
+
+
+/*
+ * Constants...
+ */
+
+#  define MXML_WRAP		72	/* Wrap XML output at this column position */
+#  define MXML_TAB		8	/* Tabs every N columns */
+
+#  define MXML_NO_CALLBACK	0	/* Don't use a type callback */
+#  define MXML_INTEGER_CALLBACK	mxml_integer_cb
+					/* Treat all data as integers */
+#  define MXML_OPAQUE_CALLBACK	mxml_opaque_cb
+					/* Treat all data as opaque */
+#  define MXML_REAL_CALLBACK	mxml_real_cb
+					/* Treat all data as real numbers */
+#  define MXML_TEXT_CALLBACK	0	/* Treat all data as text */
+
+#  define MXML_NO_PARENT	0	/* No parent for the node */
+
+#  define MXML_DESCEND		1	/* Descend when finding/walking */
+#  define MXML_NO_DESCEND	0	/* Don't descend when finding/walking */
+#  define MXML_DESCEND_FIRST	-1	/* Descend for first find */
+
+#  define MXML_WS_BEFORE_OPEN	0	/* Callback for before open tag */
+#  define MXML_WS_AFTER_OPEN	1	/* Callback for after open tag */
+#  define MXML_WS_BEFORE_CLOSE	2	/* Callback for before close tag */
+#  define MXML_WS_AFTER_CLOSE	3	/* Callback for after close tag */
+
+#  define MXML_ADD_BEFORE	0	/* Add node before specified node */
+#  define MXML_ADD_AFTER	1	/* Add node after specified node */
+#  define MXML_ADD_TO_PARENT	NULL	/* Add node relative to parent */
+
+
+/*
+ * Data types...
+ */
+
+typedef enum mxml_type_e		/**** The XML node type. ****/
+{
+  MXML_ELEMENT,				/* XML element with attributes */
+  MXML_INTEGER,				/* Integer value */
+  MXML_OPAQUE,				/* Opaque string */
+  MXML_REAL,				/* Real value */
+  MXML_TEXT,				/* Text fragment */
+  MXML_CUSTOM				/* Custom data */
+} mxml_type_t;
+
+typedef struct mxml_attr_s		/**** An XML element attribute value. ****/
+{
+  char			*name;		/* Attribute name */
+  char			*value;		/* Attribute value */
+} mxml_attr_t;
+
+typedef struct mxml_value_s		/**** An XML element value. ****/
+{
+  char			*name;		/* Name of element */
+  int			num_attrs;	/* Number of attributes */
+  mxml_attr_t		*attrs;		/* Attributes */
+} mxml_element_t;
+
+typedef struct mxml_text_s		/**** An XML text value. ****/
+{
+  int			whitespace;	/* Leading whitespace? */
+  char			*string;	/* Fragment string */
+} mxml_text_t;
+
+typedef struct mxml_custom_s		/**** An XML custom value. ****/
+{
+  void			*data;		/* Pointer to (allocated) custom data */
+  void			(*destroy)(void *);
+					/* Pointer to destructor function */
+} mxml_custom_t;
+
+typedef union mxml_value_u		/**** An XML node value. ****/
+{
+  mxml_element_t	element;	/* Element */
+  int			integer;	/* Integer number */
+  char			*opaque;	/* Opaque string */
+  double		real;		/* Real number */
+  mxml_text_t		text;		/* Text fragment */
+  mxml_custom_t		custom;		/* Custom data */
+} mxml_value_t;
+
+typedef struct mxml_node_s		/**** An XML node. ****/
+{
+  mxml_type_t		type;		/* Node type */
+  struct mxml_node_s	*next;		/* Next node under same parent */
+  struct mxml_node_s	*prev;		/* Previous node under same parent */
+  struct mxml_node_s	*parent;	/* Parent node */
+  struct mxml_node_s	*child;		/* First child node */
+  struct mxml_node_s	*last_child;	/* Last child node */
+  mxml_value_t		value;		/* Node value */
+} mxml_node_t;
+
+typedef struct mxml_index_s		/**** An XML node index. ****/
+{
+  char			*attr;		/* Attribute used for indexing or NULL */
+  int			num_nodes;	/* Number of nodes in index */
+  int			alloc_nodes;	/* Allocated nodes in index */
+  int			cur_node;	/* Current node */
+  mxml_node_t		**nodes;	/* Node array */
+} mxml_index_t;
+
+typedef int (*mxml_custom_load_cb_t)(mxml_node_t *, const char *);
+					/**** Custom data load callback function ****/
+
+typedef char *(*mxml_custom_save_cb_t)(mxml_node_t *);  
+					/**** Custom data save callback function ****/
+
+
+/*
+ * C++ support...
+ */
+
+#  ifdef __cplusplus
+extern "C" {
+#  endif /* __cplusplus */
+
+/*
+ * Prototypes...
+ */
+
+extern void		mxmlAdd(mxml_node_t *parent, int where,
+			        mxml_node_t *child, mxml_node_t *node);
+extern void		mxmlDelete(mxml_node_t *node);
+extern const char	*mxmlElementGetAttr(mxml_node_t *node, const char *name);
+extern void		mxmlElementSetAttr(mxml_node_t *node, const char *name,
+			                   const char *value);
+extern int		mxmlEntityAddCallback(int (*cb)(const char *name));
+extern const char	*mxmlEntityGetName(int val);
+extern int		mxmlEntityGetValue(const char *name);
+extern void		mxmlEntityRemoveCallback(int (*cb)(const char *name));
+extern mxml_node_t	*mxmlFindElement(mxml_node_t *node, mxml_node_t *top,
+			                 const char *name, const char *attr,
+					 const char *value, int descend);
+extern void		mxmlIndexDelete(mxml_index_t *ind);
+extern mxml_node_t	*mxmlIndexEnum(mxml_index_t *ind);
+extern mxml_node_t	*mxmlIndexFind(mxml_index_t *ind,
+			               const char *element,
+			               const char *value);
+extern mxml_index_t	*mxmlIndexNew(mxml_node_t *node, const char *element,
+			              const char *attr);
+extern mxml_node_t	*mxmlIndexReset(mxml_index_t *ind);
+extern mxml_node_t	*mxmlLoadFd(mxml_node_t *top, int fd,
+			            mxml_type_t (*cb)(mxml_node_t *));
+extern mxml_node_t	*mxmlLoadFile(mxml_node_t *top, FILE *fp,
+			              mxml_type_t (*cb)(mxml_node_t *));
+extern mxml_node_t	*mxmlLoadString(mxml_node_t *top, const char *s,
+			                mxml_type_t (*cb)(mxml_node_t *));
+extern mxml_node_t	*mxmlNewCustom(mxml_node_t *parent, void *data,
+			               void (*destroy)(void *));
+extern mxml_node_t	*mxmlNewElement(mxml_node_t *parent, const char *name);
+extern mxml_node_t	*mxmlNewInteger(mxml_node_t *parent, int integer);
+extern mxml_node_t	*mxmlNewOpaque(mxml_node_t *parent, const char *opaque);
+extern mxml_node_t	*mxmlNewReal(mxml_node_t *parent, double real);
+extern mxml_node_t	*mxmlNewText(mxml_node_t *parent, int whitespace,
+			             const char *string);
+extern mxml_node_t	*mxmlNewTextf(mxml_node_t *parent, int whitespace,
+			              const char *format, ...)
+#    ifdef __GNUC__
+__attribute__ ((__format__ (__printf__, 3, 4)))
+#    endif /* __GNUC__ */
+;
+extern void		mxmlRemove(mxml_node_t *node);
+extern char		*mxmlSaveAllocString(mxml_node_t *node,
+			        	     const char *(*cb)(mxml_node_t *, int));
+extern int		mxmlSaveFd(mxml_node_t *node, int fd,
+			           const char *(*cb)(mxml_node_t *, int));
+extern int		mxmlSaveFile(mxml_node_t *node, FILE *fp,
+			             const char *(*cb)(mxml_node_t *, int));
+extern int		mxmlSaveString(mxml_node_t *node, char *buffer,
+			               int bufsize,
+			               const char *(*cb)(mxml_node_t *, int));
+extern int		mxmlSetCustom(mxml_node_t *node, void *data,
+			              void (*destroy)(void *));
+extern void		mxmlSetCustomHandlers(mxml_custom_load_cb_t load,
+			                      mxml_custom_save_cb_t save);
+extern int		mxmlSetElement(mxml_node_t *node, const char *name);
+extern void		mxmlSetErrorCallback(void (*cb)(const char *));
+extern int		mxmlSetInteger(mxml_node_t *node, int integer);
+extern int		mxmlSetOpaque(mxml_node_t *node, const char *opaque);
+extern int		mxmlSetReal(mxml_node_t *node, double real);
+extern int		mxmlSetText(mxml_node_t *node, int whitespace,
+			            const char *string);
+extern int		mxmlSetTextf(mxml_node_t *node, int whitespace,
+			             const char *format, ...)
+#    ifdef __GNUC__
+__attribute__ ((__format__ (__printf__, 3, 4)))
+#    endif /* __GNUC__ */
+;
+extern mxml_node_t	*mxmlWalkNext(mxml_node_t *node, mxml_node_t *top,
+			              int descend);
+extern mxml_node_t	*mxmlWalkPrev(mxml_node_t *node, mxml_node_t *top,
+			              int descend);
+
+
+/*
+ * Private functions...
+ */
+
+extern void		mxml_error(const char *format, ...);
+extern mxml_type_t	mxml_integer_cb(mxml_node_t *node);
+extern mxml_type_t	mxml_opaque_cb(mxml_node_t *node);
+extern mxml_type_t	mxml_real_cb(mxml_node_t *node);
+
+
+/*
+ * C++ support...
+ */
+
+#  ifdef __cplusplus
+}
+#  endif /* __cplusplus */
+#endif /* !_mxml_h_ */
+
+
+/*
+ * End of "$Id: mxml.h 22267 2006-04-24 17:11:45Z kpfleming $".
+ */

menuselect/mxml/mxml.list.in

@@ -0,0 +1,115 @@
+#
+# "$Id: mxml.list.in 22267 2006-04-24 17:11:45Z kpfleming $"
+#
+# EPM software list file for Mini-XML, a small XML library.
+#
+# Copyright 2003-2005 by Michael Sweet.
+#
+# This program is free software; you can redistribute it and/or
+# modify it under the terms of the GNU Library General Public
+# License as published by the Free Software Foundation; either
+# version 2, or (at your option) any later version.
+#
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+# GNU General Public License for more details.
+#
+
+# Directories...
+$prefix=@prefix@
+$exec_prefix=@exec_prefix@
+$bindir=@bindir@
+$docdir=@docdir@
+$includedir=@includedir@
+$libdir=@libdir@
+$mandir=@mandir@
+$srcdir=@srcdir@
+$datarootdir=@datarootdir@
+
+$PICFLAG=@PICFLAG@
+
+# Product information
+%product mxml
+%copyright 2003-2005 by Michael Sweet
+%vendor Michael Sweet
+%license ${srcdir}/COPYING
+%readme ${srcdir}/README
+%version @VERSION@
+
+%description <<EOF
+Mini-XML is a small XML parsing library that you can use to read
+XML and XML-like data files in your application without
+requiring large non-standard libraries.  Mini-XML provides the
+following functionality:
+
+    - Reading of UTF-8 and UTF-16 and writing of UTF-8 encoded
+      XML files and strings.
+    - Data is stored in a linked-list tree structure, preserving
+      the XML data hierarchy.
+    - Supports arbitrary element names, attributes, and
+      attribute values with no preset limits, just available
+      memory.
+    - Supports integer, real, opaque ("cdata"), and text data
+      types in "leaf" nodes.
+    - Functions for creating and managing trees of data.
+    - "Find" and "walk" functions for easily locating and
+      navigating trees of data.
+
+Mini-XML doesn't do validation or other types of processing on
+the data based upon schema files or other sources of definition
+information, nor does it support character entities other than
+those required by the XML specification.
+EOF
+
+# Manpage extensions...
+$CAT1EXT=@CAT1EXT@
+$CAT3EXT=@CAT3EXT@
+$MAN1EXT=@MAN1EXT@
+$MAN3EXT=@MAN3EXT@
+
+# Executables
+f 0555 root sys ${bindir}/mxmldoc mxmldoc
+
+# Header files
+f 0444 root sys ${includedir}/mxml.h mxml.h
+
+# Libraries
+%if $PICFLAG
+%system hpux
+f 0555 root sys ${libdir}/libmxml.sl.1 libmxml.sl.1
+l 0555 root sys ${libdir}/libmxml.sl libmxml.sl.1
+
+%system dylib
+f 0555 root sys ${libdir}/libmxml.1.dylib libmxml.1.dylib
+l 0555 root sys ${libdir}/libmxml.dylib libmxml.1.dylib
+
+%system freebsd irix linux netbsd openbsd solaris tru64
+f 0555 root sys ${libdir}/libmxml.so.1.0 libmxml.so.1.0
+l 0555 root sys ${libdir}/libmxml.sl.1 libmxml.sl.1.0
+l 0555 root sys ${libdir}/libmxml.sl libmxml.sl.1.0
+
+%system all
+%endif
+
+f 0444 root sys ${libdir}/libmxml.a libmxml.a
+
+# pkg-config info
+f 0444 root sys $(libdir)/pkgconfig/mxml.pc mxml.pc
+
+# Documentation
+f 0444 root sys ${docdir}/README $srcdir/README
+f 0444 root sys ${docdir}/COPYING $srcdir/COPYING
+f 0444 root sys ${docdir}/CHANGES $srcdir/CHANGES
+f 0444 root sys ${docdir}/mxml.html $srcdir/doc/mxml.html
+f 0444 root sys ${docdir}/mxml.pdf $srcdir/doc/mxml.pdf
+
+# Man pages
+f 0444 root sys ${mandir}/cat1/mxmldoc.$CAT1EXT $srcdir/mxmldoc.$CAT1EXT
+f 0444 root sys ${mandir}/man1/mxmldoc.$MAN1EXT $srcdir/mxmldoc.man
+f 0444 root sys ${mandir}/cat3/mxml.$CAT3EXT $srcdir/mxml.$CAT3EXT
+f 0444 root sys ${mandir}/man3/mxml.$MAN3EXT $srcdir/mxml.man
+
+#
+# End of "$Id: mxml.list.in 22267 2006-04-24 17:11:45Z kpfleming $".
+#

menuselect/mxml/mxml.pc.in

@@ -0,0 +1,10 @@
+prefix=@prefix@
+exec_prefix=@exec_prefix@
+libdir=@libdir@
+includedir=@includedir@
+
+Name: Mini-XML
+Description: Lightweight XML support library
+Version: @VERSION@
+Libs: @PC_LIBS@
+Cflags: @PC_CFLAGS@

menuselect/strcompat.c

@@ -0,0 +1,243 @@
+/*
+ * Asterisk -- An open source telephony toolkit.
+ *
+ * Copyright (C) 1999 - 2006, Digium, Inc.
+ *
+ * See http://www.asterisk.org for more information about
+ * the Asterisk project. Please do not directly contact
+ * any of the maintainers of this project for assistance;
+ * the project provides a web site, mailing lists and IRC
+ * channels for your use.
+ *
+ * This program is free software, distributed under the terms of
+ * the GNU General Public License Version 2. See the LICENSE file
+ * at the top of the source tree.
+ */
+
+/*! \file
+ *
+ * \brief Compatibility functions for strsep and strtoq missing on Solaris 
+ */
+
+#include "autoconfig.h"
+
+#include <sys/types.h>
+#include <ctype.h>
+#include <stdio.h>
+#include <stdlib.h>
+#include <string.h>
+#include <stdarg.h>
+
+#ifdef HAVE_ALLOCA_H
+#include <alloca.h>
+#endif
+
+#ifndef HAVE_STRSEP
+char *strsep(char **str, const char *delims)
+{
+    char *token;
+
+    if (!*str) {
+        /* No more tokens */
+        return NULL;
+    }
+
+    token = *str;
+    while (**str != '\0') {
+        if (strchr(delims, **str)) {
+            **str = '\0';
+            (*str)++;
+            return token;
+        }
+        (*str)++;
+    }
+
+    /* There is no other token */
+    *str = NULL;
+
+    return token;
+}
+#endif
+
+#ifndef HAVE_SETENV
+int setenv(const char *name, const char *value, int overwrite)
+{
+	unsigned char *buf;
+	int buflen;
+
+	buflen = strlen(name) + strlen(value) + 2;
+	buf = alloca(buflen);
+
+	if (!overwrite && getenv(name))
+		return 0;
+
+	snprintf(buf, buflen, "%s=%s", name, value);
+
+	return putenv(buf);
+}
+#endif
+
+#ifndef HAVE_UNSETENV
+int unsetenv(const char *name)
+{
+	return setenv(name, "", 0);
+}
+#endif
+
+#ifndef HAVE_STRCASESTR
+static char *upper(const char *orig, char *buf, int bufsize)
+{
+	int i = 0;
+
+	while (i < (bufsize - 1) && orig[i]) {
+		buf[i] = toupper(orig[i]);
+		i++;
+	}
+
+	buf[i] = '\0';
+
+	return buf;
+}
+
+char *strcasestr(const char *haystack, const char *needle)
+{
+	char *u1, *u2;
+	int u1len = strlen(haystack) + 1, u2len = strlen(needle) + 1;
+
+	u1 = alloca(u1len);
+	u2 = alloca(u2len);
+	if (u1 && u2) {
+		char *offset;
+		if (u2len > u1len) {
+			/* Needle bigger than haystack */
+			return NULL;
+		}
+		offset = strstr(upper(haystack, u1, u1len), upper(needle, u2, u2len));
+		if (offset) {
+			/* Return the offset into the original string */
+			return ((char *)((unsigned long)haystack + (unsigned long)(offset - u1)));
+		} else {
+			return NULL;
+		}
+	} else {
+		return NULL;
+	}
+}
+#endif /* !HAVE_STRCASESTR */
+
+#ifndef HAVE_STRNLEN
+size_t strnlen(const char *s, size_t n)
+{
+	size_t len;
+
+	for (len = 0; len < n; len++)
+		if (s[len] == '\0')
+			break;
+
+	return len;
+}
+#endif /* !HAVE_STRNLEN */
+
+#if !defined(HAVE_STRNDUP) && !defined(__AST_DEBUG_MALLOC)
+char *strndup(const char *s, size_t n)
+{
+	size_t len = strnlen(s, n);
+	char *new = malloc(len + 1);
+
+	if (!new)
+		return NULL;
+
+	new[len] = '\0';
+	return memcpy(new, s, len);
+}
+#endif /* !defined(HAVE_STRNDUP) && !defined(__AST_DEBUG_MALLOC) */
+
+#if !defined(HAVE_VASPRINTF) && !defined(__AST_DEBUG_MALLOC)
+int vasprintf(char **strp, const char *fmt, va_list ap)
+{
+	int size;
+	va_list ap2;
+	char s;
+
+	*strp = NULL;
+	va_copy(ap2, ap);
+	size = vsnprintf(&s, 1, fmt, ap2);
+	va_end(ap2);
+	*strp = malloc(size + 1);
+	if (!*strp)
+		return -1;
+	vsnprintf(*strp, size + 1, fmt, ap);
+
+	return size;
+}
+#endif /* !defined(HAVE_VASPRINTF) && !defined(__AST_DEBUG_MALLOC) */
+
+/*
+ * Based on Code from bsd-asprintf from OpenSSH
+ * Copyright (c) 2004 Darren Tucker.
+ *
+ * Based originally on asprintf.c from OpenBSD:
+ * Copyright (c) 1997 Todd C. Miller <Todd.Miller@courtesan.com>
+ *
+ * Permission to use, copy, modify, and distribute this software for any
+ * purpose with or without fee is hereby granted, provided that the above
+ * copyright notice and this permission notice appear in all copies.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES
+ * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF
+ * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR
+ * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES
+ * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN
+ * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF
+ * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
+ */
+#if !defined(HAVE_ASPRINTF) && !defined(__AST_DEBUG_MALLOC) 
+int asprintf(char **str, const char *fmt, ...)
+{
+        va_list ap;
+        int ret;
+
+        *str = NULL;
+        va_start(ap, fmt);
+        ret = vasprintf(str, fmt, ap);
+        va_end(ap);
+
+        return ret;
+}
+#endif /* !defined(HAVE_ASPRINTF) && !defined(__AST_DEBUG_MALLOC) */
+
+#ifndef HAVE_GETLOADAVG
+#ifdef linux
+/*! \brief Alternative method of getting load avg on Linux only */
+int getloadavg(double *list, int nelem)
+{
+	FILE *LOADAVG;
+	double avg[3] = { 0.0, 0.0, 0.0 };
+	int i, res = -1;
+
+	if ((LOADAVG = fopen("/proc/loadavg", "r"))) {
+		fscanf(LOADAVG, "%lf %lf %lf", &avg[0], &avg[1], &avg[2]);
+		res = 0;
+		fclose(LOADAVG);
+	}
+
+	for (i = 0; (i < nelem) && (i < 3); i++) {
+		list[i] = avg[i];
+	}
+
+	return res;
+}
+#else /* !linux */
+/*! \brief Return something that won't cancel the call, but still return -1, in case
+ * we correct the implementation to check return value */
+int getloadavg(double *list, int nelem)
+{
+	int i;
+
+	for (i = 0; i < nelem; i++) {
+		list[i] = 0.1;
+	}
+	return -1;
+}
+#endif /* linux */
+#endif /* !HAVE_GETLOADAVG */

menuselect/test/build_tools/menuselect-deps

@@ -0,0 +1,52 @@
+ASOUND=1
+CRYPTO=1
+CURL=1
+DAHDI=1
+FREETDS=1
+GMIME=1
+GNU_LD=1
+GSM=1
+GTK2=1
+GTK=0
+H323=0
+HOARD=0
+ICONV=1
+IKSEMEL=1
+IMAP_TK=1
+ISDNNET=0
+IXJUSER=1
+JACK=1
+LDAP=1
+LTDL=1
+LUA=0
+MISDN=0
+NBS=0
+NETSNMP=0
+NEWT=1
+OGG=1
+OPENH323=0
+OSPTK=1
+OSSAUDIO=1
+PGSQL=1
+POPT=1
+PORTAUDIO=1
+PRI=0
+RESAMPLE=0
+AIS=0
+RADIUS=1
+SPANDSP=0
+SPEEX=1
+SPEEXDSP=1
+SPEEX_PREPROCESS=1
+SQLITE3=1
+SQLITE=1
+SS7=0
+SSL=1
+SUPPSERV=0
+TONEZONE=1
+UNIXODBC=1
+USB=1
+VORBIS=1
+VPBAPI=0
+WINARCH=0
+ZLIB=1

menuselect/test/menuselect-tree

@@ -0,0 +1,716 @@
+<?xml version="1.0"?>
+
+<menu name="Asterisk Module and Build Option Selection">
+<category name="MENUSELECT_APPS" displayname="Applications" remove_on_change="apps/modules.link">
+<member name="app_adsiprog" displayname="Asterisk ADSI Programming Application" remove_on_change="apps/app_adsiprog.o apps/app_adsiprog.so">
+	<depend>res_adsi</depend>
+</member>
+<member name="app_alarmreceiver" displayname="Alarm Receiver for Asterisk" remove_on_change="apps/app_alarmreceiver.o apps/app_alarmreceiver.so">
+</member>
+<member name="app_amd" displayname="Answering Machine Detection Application" remove_on_change="apps/app_amd.o apps/app_amd.so">
+</member>
+<member name="app_authenticate" displayname="Authentication Application" remove_on_change="apps/app_authenticate.o apps/app_authenticate.so">
+</member>
+<member name="app_cdr" displayname="Tell Asterisk to not maintain a CDR for the current call" remove_on_change="apps/app_cdr.o apps/app_cdr.so">
+</member>
+<member name="app_chanisavail" displayname="Check channel availability" remove_on_change="apps/app_chanisavail.o apps/app_chanisavail.so">
+</member>
+<member name="app_channelredirect" displayname="Redirects a given channel to a dialplan target" remove_on_change="apps/app_channelredirect.o apps/app_channelredirect.so">
+</member>
+<member name="app_chanspy" displayname="Listen to the audio of an active channel" remove_on_change="apps/app_chanspy.o apps/app_chanspy.so">
+</member>
+<member name="app_controlplayback" displayname="Control Playback Application" remove_on_change="apps/app_controlplayback.o apps/app_controlplayback.so">
+</member>
+<member name="app_dahdibarge" displayname="Barge in on DAHDI channel application" remove_on_change="apps/app_dahdibarge.o apps/app_dahdibarge.so">
+	<depend name="dahdi">DAHDI</depend>
+</member>
+<member name="app_dahdiras" displayname="DAHDI ISDN Remote Access Server" remove_on_change="apps/app_dahdiras.o apps/app_dahdiras.so">
+	<depend name="dahdi">DAHDI</depend>
+</member>
+<member name="app_dahdiscan" displayname="Scan DAHDI channels application" remove_on_change="apps/app_dahdiscan.o apps/app_dahdiscan.so">
+	<depend name="dahdi">DAHDI</depend>
+</member>
+<member name="app_db" displayname="Database Access Functions" remove_on_change="apps/app_db.o apps/app_db.so">
+</member>
+<member name="app_dial" displayname="Dialing Application" remove_on_change="apps/app_dial.o apps/app_dial.so">
+	<depend>chan_local</depend>
+</member>
+<member name="app_dictate" displayname="Virtual Dictation Machine" remove_on_change="apps/app_dictate.o apps/app_dictate.so">
+</member>
+<member name="app_directed_pickup" displayname="Directed Call Pickup Application" remove_on_change="apps/app_directed_pickup.o apps/app_directed_pickup.so">
+</member>
+<member name="app_directory" displayname="Extension Directory" remove_on_change="apps/app_directory.o apps/app_directory.so">
+	<depend>app_voicemail</depend>
+</member>
+<member name="app_disa" displayname="DISA (Direct Inward System Access) Application" remove_on_change="apps/app_disa.o apps/app_disa.so">
+</member>
+<member name="app_dumpchan" displayname="Dump Info About The Calling Channel" remove_on_change="apps/app_dumpchan.o apps/app_dumpchan.so">
+</member>
+<member name="app_echo" displayname="Simple Echo Application" remove_on_change="apps/app_echo.o apps/app_echo.so">
+</member>
+<member name="app_exec" displayname="Executes dialplan applications" remove_on_change="apps/app_exec.o apps/app_exec.so">
+</member>
+<member name="app_externalivr" displayname="External IVR Interface Application" remove_on_change="apps/app_externalivr.o apps/app_externalivr.so">
+</member>
+<member name="app_fax" displayname="Simple FAX Application" remove_on_change="apps/app_fax.o apps/app_fax.so">
+	 <depend>spandsp</depend>
+</member>
+<member name="app_festival" displayname="Simple Festival Interface" remove_on_change="apps/app_festival.o apps/app_festival.so">
+</member>
+<member name="app_flash" displayname="Flash channel application" remove_on_change="apps/app_flash.o apps/app_flash.so">
+	<depend name="dahdi">DAHDI</depend>
+</member>
+<member name="app_followme" displayname="Find-Me/Follow-Me Application" remove_on_change="apps/app_followme.o apps/app_followme.so">
+	<depend>chan_local</depend>
+</member>
+<member name="app_forkcdr" displayname="Fork The CDR into 2 separate entities" remove_on_change="apps/app_forkcdr.o apps/app_forkcdr.so">
+</member>
+<member name="app_getcpeid" displayname="Get ADSI CPE ID" remove_on_change="apps/app_getcpeid.o apps/app_getcpeid.so">
+</member>
+<member name="app_ices" displayname="Encode and Stream via icecast and ices" remove_on_change="apps/app_ices.o apps/app_ices.so">
+</member>
+<member name="app_image" displayname="Image Transmission Application" remove_on_change="apps/app_image.o apps/app_image.so">
+</member>
+<member name="app_ivrdemo" displayname="IVR Demo Application" remove_on_change="apps/app_ivrdemo.o apps/app_ivrdemo.so">
+	<defaultenabled>no</defaultenabled>
+</member>
+<member name="app_jack" displayname="JACK Interface" remove_on_change="apps/app_jack.o apps/app_jack.so">
+	<depend>jack</depend>
+	<depend name="resample">libresample</depend>
+</member>
+<member name="app_macro" displayname="Extension Macros" remove_on_change="apps/app_macro.o apps/app_macro.so">
+</member>
+<member name="app_meetme" displayname="MeetMe conference bridge" remove_on_change="apps/app_meetme.o apps/app_meetme.so">
+	<depend>dahdi</depend>
+</member>
+<member name="app_milliwatt" displayname="Digital Milliwatt (mu-law) Test Application" remove_on_change="apps/app_milliwatt.o apps/app_milliwatt.so">
+	<depend>res_indications</depend>
+</member>
+<member name="app_minivm" displayname="Mini VoiceMail (A minimal Voicemail e-mail System)" remove_on_change="apps/app_minivm.o apps/app_minivm.so">
+</member>
+<member name="app_mixmonitor" displayname="Mixed Audio Monitoring Application" remove_on_change="apps/app_mixmonitor.o apps/app_mixmonitor.so">
+</member>
+<member name="app_morsecode" displayname="Morse code" remove_on_change="apps/app_morsecode.o apps/app_morsecode.so">
+</member>
+<member name="app_mp3" displayname="Silly MP3 Application" remove_on_change="apps/app_mp3.o apps/app_mp3.so">
+</member>
+<member name="app_nbscat" displayname="Silly NBS Stream Application" remove_on_change="apps/app_nbscat.o apps/app_nbscat.so">
+</member>
+<member name="app_osplookup" displayname="Open Settlement Protocol Applications" remove_on_change="apps/app_osplookup.o apps/app_osplookup.so">
+	<depend>osptk</depend>
+	<depend>ssl</depend>
+</member>
+<member name="app_page" displayname="Page Multiple Phones" remove_on_change="apps/app_page.o apps/app_page.so">
+	<depend name="dahdi">DAHDI</depend>
+	<depend>app_meetme</depend>
+</member>
+<member name="app_parkandannounce" displayname="Call Parking and Announce Application" remove_on_change="apps/app_parkandannounce.o apps/app_parkandannounce.so">
+</member>
+<member name="app_playback" displayname="Sound File Playback Application" remove_on_change="apps/app_playback.o apps/app_playback.so">
+</member>
+<member name="app_privacy" displayname="Require phone number to be entered, if no CallerID sent" remove_on_change="apps/app_privacy.o apps/app_privacy.so">
+</member>
+<member name="app_queue" displayname="True Call Queueing" remove_on_change="apps/app_queue.o apps/app_queue.so">
+	<depend>res_monitor</depend>
+</member>
+<member name="app_read" displayname="Read Variable Application" remove_on_change="apps/app_read.o apps/app_read.so">
+</member>
+<member name="app_readexten" displayname="Read and evaluate extension validity" remove_on_change="apps/app_readexten.o apps/app_readexten.so">
+</member>
+<member name="app_readfile" displayname="Stores output of file into a variable" remove_on_change="apps/app_readfile.o apps/app_readfile.so">
+</member>
+<member name="app_record" displayname="Trivial Record Application" remove_on_change="apps/app_record.o apps/app_record.so">
+</member>
+<member name="app_rpt" displayname="Radio Repeater/Remote Base Application" remove_on_change="apps/app_rpt.o apps/app_rpt.so">
+	<depend name="dahdi">DAHDI</depend>
+	<depend>tonezone</depend>
+	<defaultenabled>no</defaultenabled>
+</member>
+<member name="app_sayunixtime" displayname="Say time" remove_on_change="apps/app_sayunixtime.o apps/app_sayunixtime.so">
+</member>
+<member name="app_senddtmf" displayname="Send DTMF digits Application" remove_on_change="apps/app_senddtmf.o apps/app_senddtmf.so">
+</member>
+<member name="app_sendtext" displayname="Send Text Applications" remove_on_change="apps/app_sendtext.o apps/app_sendtext.so">
+</member>
+<member name="app_setcallerid" displayname="Set CallerID Presentation Application" remove_on_change="apps/app_setcallerid.o apps/app_setcallerid.so">
+</member>
+<member name="app_skel" displayname="Skeleton (sample) Application" remove_on_change="apps/app_skel.o apps/app_skel.so">
+	<defaultenabled>no</defaultenabled>
+</member>
+<member name="app_sms" displayname="SMS/PSTN handler" remove_on_change="apps/app_sms.o apps/app_sms.so">
+</member>
+<member name="app_softhangup" displayname="Hangs up the requested channel" remove_on_change="apps/app_softhangup.o apps/app_softhangup.so">
+</member>
+<member name="app_speech_utils" displayname="Dialplan Speech Applications" remove_on_change="apps/app_speech_utils.o apps/app_speech_utils.so">
+</member>
+<member name="app_stack" displayname="Dialplan subroutines (Gosub, Return, etc)" remove_on_change="apps/app_stack.o apps/app_stack.so">
+</member>
+<member name="app_system" displayname="Generic System() application" remove_on_change="apps/app_system.o apps/app_system.so">
+</member>
+<member name="app_talkdetect" displayname="Playback with Talk Detection" remove_on_change="apps/app_talkdetect.o apps/app_talkdetect.so">
+</member>
+<member name="app_test" displayname="Interface Test Application" remove_on_change="apps/app_test.o apps/app_test.so">
+</member>
+<member name="app_transfer" displayname="Transfers a caller to another extension" remove_on_change="apps/app_transfer.o apps/app_transfer.so">
+</member>
+<member name="app_url" displayname="Send URL Applications" remove_on_change="apps/app_url.o apps/app_url.so">
+</member>
+<member name="app_userevent" displayname="Custom User Event Application" remove_on_change="apps/app_userevent.o apps/app_userevent.so">
+</member>
+<member name="app_verbose" displayname="Send verbose output" remove_on_change="apps/app_verbose.o apps/app_verbose.so">
+</member>
+<member name="app_voicemail" displayname="Comedian Mail (Voicemail System)" remove_on_change="apps/app_voicemail.o apps/app_voicemail.so">
+	<depend>res_smdi</depend>
+</member>
+<member name="app_waitforring" displayname="Waits until first ring after time" remove_on_change="apps/app_waitforring.o apps/app_waitforring.so">
+</member>
+<member name="app_waitforsilence" displayname="Wait For Silence" remove_on_change="apps/app_waitforsilence.o apps/app_waitforsilence.so">
+</member>
+<member name="app_waituntil" displayname="Wait until specified time" remove_on_change="apps/app_waituntil.o apps/app_waituntil.so">
+</member>
+<member name="app_while" displayname="While Loops and Conditional Execution" remove_on_change="apps/app_while.o apps/app_while.so">
+</member>
+<member name="app_zapateller" displayname="Block Telemarketers with Special Information Tone" remove_on_change="apps/app_zapateller.o apps/app_zapateller.so">
+</member>
+</category>
+<category name="MENUSELECT_CDR" displayname="Call Detail Recording" remove_on_change="cdr/modules.link">
+<member name="cdr_adaptive_odbc" displayname="Adaptive ODBC CDR backend" remove_on_change="cdr/cdr_adaptive_odbc.o cdr/cdr_adaptive_odbc.so">
+	<depend name="unixODBC">unixodbc</depend>
+</member>
+<member name="cdr_csv" displayname="Comma Separated Values CDR Backend" remove_on_change="cdr/cdr_csv.o cdr/cdr_csv.so">
+</member>
+<member name="cdr_custom" displayname="Customizable Comma Separated Values CDR Backend" remove_on_change="cdr/cdr_custom.o cdr/cdr_custom.so">
+</member>
+<member name="cdr_manager" displayname="Asterisk Manager Interface CDR Backend" remove_on_change="cdr/cdr_manager.o cdr/cdr_manager.so">
+</member>
+<member name="cdr_odbc" displayname="ODBC CDR Backend" remove_on_change="cdr/cdr_odbc.o cdr/cdr_odbc.so">
+	<depend name="unixodbc">unixODBC</depend>
+	<depend name="ltdl">libtool-ltdl</depend>
+</member>
+<member name="cdr_pgsql" displayname="PostgreSQL CDR Backend" remove_on_change="cdr/cdr_pgsql.o cdr/cdr_pgsql.so">
+	<depend name="pgsql">PostgreSQL</depend>
+</member>
+<member name="cdr_radius" displayname="RADIUS CDR Backend" remove_on_change="cdr/cdr_radius.o cdr/cdr_radius.so">
+	<depend>radius</depend>
+</member>
+<member name="cdr_sqlite3_custom" displayname="SQLite3 Custom CDR Module" remove_on_change="cdr/cdr_sqlite3_custom.o cdr/cdr_sqlite3_custom.so">
+	<depend>sqlite3</depend>
+</member>
+<member name="cdr_sqlite" displayname="SQLite CDR Backend" remove_on_change="cdr/cdr_sqlite.o cdr/cdr_sqlite.so">
+	<depend>sqlite</depend>
+</member>
+<member name="cdr_tds" displayname="FreeTDS CDR Backend" remove_on_change="cdr/cdr_tds.o cdr/cdr_tds.so">
+	<depend name="freetds">FreeTDS</depend>
+</member>
+</category>
+<category name="MENUSELECT_CHANNELS" displayname="Channel Drivers" remove_on_change="channels/modules.link">
+<member name="chan_agent" displayname="Agent Proxy Channel" remove_on_change="channels/chan_agent.o channels/chan_agent.so">
+        <depend>chan_local</depend>
+</member>
+<member name="chan_alsa" displayname="ALSA Console Channel Driver" remove_on_change="channels/chan_alsa.o channels/chan_alsa.so">
+	<depend>asound</depend>
+</member>
+<member name="chan_console" displayname="Console Channel Driver" remove_on_change="channels/chan_console.o channels/chan_console.so">
+	<depend>portaudio</depend>
+</member>
+<member name="chan_dahdi" displayname="DAHDI Telephony" remove_on_change="channels/chan_dahdi.o channels/chan_dahdi.so">
+	<depend>res_smdi</depend>
+	<depend name="dahdi">DAHDI</depend>
+	<depend>tonezone</depend>
+	<use>pri</use>
+	<use>ss7</use>
+</member>
+<member name="chan_features" displayname="Feature Proxy Channel" remove_on_change="channels/chan_features.o channels/chan_features.so">
+        <defaultenabled>no</defaultenabled>
+</member>
+<member name="chan_gtalk" displayname="Gtalk Channel Driver" remove_on_change="channels/chan_gtalk.o channels/chan_gtalk.so">
+	<depend>iksemel</depend>
+	<depend>res_jabber</depend>
+	<use>openssl</use>
+</member>
+<member name="chan_h323" displayname="The NuFone Network's OpenH323 Channel Driver" remove_on_change="channels/chan_h323.o channels/chan_h323.so">
+	<depend>openh323</depend>
+	<defaultenabled>yes</defaultenabled>
+</member>
+<member name="chan_iax2" displayname="Inter Asterisk eXchange (Ver 2)" remove_on_change="channels/chan_iax2.o channels/chan_iax2.so">
+	<use>crypto</use>
+</member>
+<member name="chan_jingle" displayname="Jingle Channel Driver" remove_on_change="channels/chan_jingle.o channels/chan_jingle.so">
+	<depend>iksemel</depend>
+	<depend>res_jabber</depend>
+	<use>openssl</use>
+</member>
+<member name="chan_local" displayname="Local Proxy Channel (Note: used internally by other modules)" remove_on_change="channels/chan_local.o channels/chan_local.so">
+</member>
+<member name="chan_mgcp" displayname="Media Gateway Control Protocol (MGCP)" remove_on_change="channels/chan_mgcp.o channels/chan_mgcp.so">
+</member>
+<member name="chan_misdn" displayname="Channel driver for mISDN Support (BRI/PRI)" remove_on_change="channels/chan_misdn.o channels/chan_misdn.so">
+	<depend>isdnnet</depend>
+	<depend>misdn</depend>
+	<depend>suppserv</depend>
+</member>
+<member name="chan_nbs" displayname="Network Broadcast Sound Support" remove_on_change="channels/chan_nbs.o channels/chan_nbs.so">
+	<depend>nbs</depend>
+</member>
+<member name="chan_oss" displayname="OSS Console Channel Driver" remove_on_change="channels/chan_oss.o channels/chan_oss.so">
+	<depend>ossaudio</depend>
+</member>
+<member name="chan_phone" displayname="Linux Telephony API Support" remove_on_change="channels/chan_phone.o channels/chan_phone.so">
+	<depend>ixjuser</depend>
+</member>
+<member name="chan_sip" displayname="Session Initiation Protocol (SIP)" remove_on_change="channels/chan_sip.o channels/chan_sip.so">
+        <depend>chan_local</depend>
+</member>
+<member name="chan_skinny" displayname="Skinny Client Control Protocol (Skinny)" remove_on_change="channels/chan_skinny.o channels/chan_skinny.so">
+</member>
+<member name="chan_unistim" displayname="UNISTIM Protocol (USTM)" remove_on_change="channels/chan_unistim.o channels/chan_unistim.so">
+</member>
+<member name="chan_usbradio" displayname="usb Console Channel Driver" remove_on_change="channels/chan_usbradio.o channels/chan_usbradio.so">
+	<depend>ossaudio</depend>
+	<depend>usb</depend>
+	<defaultenabled>no</defaultenabled>
+</member>
+<member name="chan_vpb" displayname="Voicetronix API driver" remove_on_change="channels/chan_vpb.oo channels/chan_vpb.so">
+	<depend>vpbapi</depend>
+</member>
+</category>
+<category name="MENUSELECT_CODECS" displayname="Codec Translators" remove_on_change="codecs/modules.link">
+<member name="codec_adpcm" displayname="Adaptive Differential PCM Coder/Decoder" remove_on_change="codecs/codec_adpcm.o codecs/codec_adpcm.so">
+</member>
+<member name="codec_alaw" displayname="A-law Coder/Decoder" remove_on_change="codecs/codec_alaw.o codecs/codec_alaw.so">
+</member>
+<member name="codec_a_mu" displayname="A-law and Mulaw direct Coder/Decoder" remove_on_change="codecs/codec_a_mu.o codecs/codec_a_mu.so">
+</member>
+<member name="codec_dahdi" displayname="Generic DAHDI Transcoder Codec Translator" remove_on_change="codecs/codec_dahdi.o codecs/codec_dahdi.so">
+	<depend name="dahdi">DAHDI</depend>
+</member>
+<member name="codec_g722" displayname="ITU G.722-64kbps G722 Transcoder" remove_on_change="codecs/codec_g722.o codecs/codec_g722.so">
+</member>
+<member name="codec_g726" displayname="ITU G.726-32kbps G726 Transcoder" remove_on_change="codecs/codec_g726.o codecs/codec_g726.so">
+</member>
+<member name="codec_gsm" displayname="GSM Coder/Decoder" remove_on_change="codecs/codec_gsm.o codecs/codec_gsm.so">
+	<depend>gsm</depend>
+</member>
+<member name="codec_ilbc" displayname="iLBC Coder/Decoder" remove_on_change="codecs/codec_ilbc.o codecs/codec_ilbc.so">
+	<defaultenabled>no</defaultenabled>
+</member>
+<member name="codec_lpc10" displayname="LPC10 2.4kbps Coder/Decoder" remove_on_change="codecs/codec_lpc10.o codecs/codec_lpc10.so">
+</member>
+<member name="codec_resample" displayname="SLIN Resampling Codec" remove_on_change="codecs/codec_resample.o codecs/codec_resample.so">
+	<depend>resample</depend>
+</member>
+<member name="codec_speex" displayname="Speex Coder/Decoder" remove_on_change="codecs/codec_speex.o codecs/codec_speex.so">
+	<depend>speex</depend>
+	<depend>speex_preprocess</depend>
+	<use>speexdsp</use>
+</member>
+<member name="codec_ulaw" displayname="mu-Law Coder/Decoder" remove_on_change="codecs/codec_ulaw.o codecs/codec_ulaw.so">
+</member>
+</category>
+<category name="MENUSELECT_FORMATS" displayname="Format Interpreters" remove_on_change="formats/modules.link">
+<member name="format_g723" displayname="G.723.1 Simple Timestamp File Format" remove_on_change="formats/format_g723.o formats/format_g723.so">
+</member>
+<member name="format_g726" displayname="Raw G.726 (16/24/32/40kbps) data" remove_on_change="formats/format_g726.o formats/format_g726.so">
+</member>
+<member name="format_g729" displayname="Raw G729 data" remove_on_change="formats/format_g729.o formats/format_g729.so">
+</member>
+<member name="format_gsm" displayname="Raw GSM data" remove_on_change="formats/format_gsm.o formats/format_gsm.so">
+</member>
+<member name="format_h263" displayname="Raw H.263 data" remove_on_change="formats/format_h263.o formats/format_h263.so">
+</member>
+<member name="format_h264" displayname="Raw H.264 data" remove_on_change="formats/format_h264.o formats/format_h264.so">
+</member>
+<member name="format_ilbc" displayname="Raw iLBC data" remove_on_change="formats/format_ilbc.o formats/format_ilbc.so">
+</member>
+<member name="format_jpeg" displayname="JPEG (Joint Picture Experts Group) Image Format" remove_on_change="formats/format_jpeg.o formats/format_jpeg.so">
+</member>
+<member name="format_ogg_vorbis" displayname="OGG/Vorbis audio" remove_on_change="formats/format_ogg_vorbis.o formats/format_ogg_vorbis.so">
+	<depend>vorbis</depend>
+	<depend>ogg</depend>
+</member>
+<member name="format_pcm" displayname="Raw/Sun uLaw/ALaw 8KHz (PCM,PCMA,AU), G.722 16Khz" remove_on_change="formats/format_pcm.o formats/format_pcm.so">
+</member>
+<member name="format_sln16" displayname="Raw Signed Linear 16KHz Audio support (SLN16)" remove_on_change="formats/format_sln16.o formats/format_sln16.so">
+</member>
+<member name="format_sln" displayname="Raw Signed Linear Audio support (SLN)" remove_on_change="formats/format_sln.o formats/format_sln.so">
+</member>
+<member name="format_vox" displayname="Dialogic VOX (ADPCM) File Format" remove_on_change="formats/format_vox.o formats/format_vox.so">
+</member>
+<member name="format_wav" displayname="Microsoft WAV format (8000Hz Signed Linear)" remove_on_change="formats/format_wav.o formats/format_wav.so">
+</member>
+<member name="format_wav_gsm" displayname="Microsoft WAV format (Proprietary GSM)" remove_on_change="formats/format_wav_gsm.o formats/format_wav_gsm.so">
+</member>
+</category>
+<category name="MENUSELECT_FUNCS" displayname="Dialplan Functions" remove_on_change="funcs/modules.link">
+<member name="func_base64" displayname="base64 encode/decode dialplan functions" remove_on_change="funcs/func_base64.o funcs/func_base64.so">
+</member>
+<member name="func_blacklist" displayname="Look up Caller*ID name/number from blacklist database" remove_on_change="funcs/func_blacklist.o funcs/func_blacklist.so">
+</member>
+<member name="func_callerid" displayname="Caller ID related dialplan functions" remove_on_change="funcs/func_callerid.o funcs/func_callerid.so">
+</member>
+<member name="func_cdr" displayname="Call Detail Record (CDR) dialplan function" remove_on_change="funcs/func_cdr.o funcs/func_cdr.so">
+</member>
+<member name="func_channel" displayname="Channel information dialplan functions" remove_on_change="funcs/func_channel.o funcs/func_channel.so">
+</member>
+<member name="func_config" displayname="Asterisk configuration file variable access" remove_on_change="funcs/func_config.o funcs/func_config.so">
+</member>
+<member name="func_curl" displayname="Load external URL" remove_on_change="funcs/func_curl.o funcs/func_curl.so">
+	<depend>curl</depend>
+</member>
+<member name="func_cut" displayname="Cut out information from a string" remove_on_change="funcs/func_cut.o funcs/func_cut.so">
+</member>
+<member name="func_db" displayname="Database (astdb) related dialplan functions" remove_on_change="funcs/func_db.o funcs/func_db.so">
+</member>
+<member name="func_devstate" displayname="Gets or sets a device state in the dialplan" remove_on_change="funcs/func_devstate.o funcs/func_devstate.so">
+</member>
+<member name="func_dialgroup" displayname="Dialgroup dialplan function" remove_on_change="funcs/func_dialgroup.o funcs/func_dialgroup.so">
+</member>
+<member name="func_dialplan" displayname="Dialplan Context/Extension/Priority Checking Functions" remove_on_change="funcs/func_dialplan.o funcs/func_dialplan.so">
+</member>
+<member name="func_enum" displayname="ENUM related dialplan functions" remove_on_change="funcs/func_enum.o funcs/func_enum.so">
+</member>
+<member name="func_env" displayname="Environment/filesystem dialplan functions" remove_on_change="funcs/func_env.o funcs/func_env.so">
+</member>
+<member name="func_extstate" displayname="Gets an extension's state in the dialplan" remove_on_change="funcs/func_extstate.o funcs/func_extstate.so">
+</member>
+<member name="func_global" displayname="Variable dialplan functions" remove_on_change="funcs/func_global.o funcs/func_global.so">
+</member>
+<member name="func_groupcount" displayname="Channel group dialplan functions" remove_on_change="funcs/func_groupcount.o funcs/func_groupcount.so">
+</member>
+<member name="func_iconv" displayname="Charset conversions" remove_on_change="funcs/func_iconv.o funcs/func_iconv.so">
+    <depend>iconv</depend>
+</member>
+<member name="func_lock" displayname="Dialplan mutexes" remove_on_change="funcs/func_lock.o funcs/func_lock.so">
+</member>
+<member name="func_logic" displayname="Logical dialplan functions" remove_on_change="funcs/func_logic.o funcs/func_logic.so">
+</member>
+<member name="func_math" displayname="Mathematical dialplan function" remove_on_change="funcs/func_math.o funcs/func_math.so">
+</member>
+<member name="func_md5" displayname="MD5 digest dialplan functions" remove_on_change="funcs/func_md5.o funcs/func_md5.so">
+</member>
+<member name="func_module" displayname="Checks if Asterisk module is loaded in memory" remove_on_change="funcs/func_module.o funcs/func_module.so">
+</member>
+<member name="func_odbc" displayname="ODBC lookups" remove_on_change="funcs/func_odbc.o funcs/func_odbc.so">
+	<depend>unixodbc</depend>
+	<depend>ltdl</depend>
+	<depend>res_odbc</depend>
+</member>
+<member name="func_rand" displayname="Random number dialplan function" remove_on_change="funcs/func_rand.o funcs/func_rand.so">
+</member>
+<member name="func_realtime" displayname="Read/Write/Store/Destroy values from a RealTime repository" remove_on_change="funcs/func_realtime.o funcs/func_realtime.so">
+</member>
+<member name="func_sha1" displayname="SHA-1 computation dialplan function" remove_on_change="funcs/func_sha1.o funcs/func_sha1.so">
+</member>
+<member name="func_shell" displayname="Returns the output of a shell command" remove_on_change="funcs/func_shell.o funcs/func_shell.so">
+</member>
+<member name="func_speex" displayname="Noise reduction and Automatic Gain Control (AGC)" remove_on_change="funcs/func_speex.o funcs/func_speex.so">
+	<depend>speex</depend>
+	<depend>speex_preprocess</depend>
+	<use>speexdsp</use>
+</member>
+<member name="func_strings" displayname="String handling dialplan functions" remove_on_change="funcs/func_strings.o funcs/func_strings.so">
+</member>
+<member name="func_sysinfo" displayname="System information related functions" remove_on_change="funcs/func_sysinfo.o funcs/func_sysinfo.so">
+</member>
+<member name="func_timeout" displayname="Channel timeout dialplan functions" remove_on_change="funcs/func_timeout.o funcs/func_timeout.so">
+</member>
+<member name="func_uri" displayname="URI encode/decode dialplan functions" remove_on_change="funcs/func_uri.o funcs/func_uri.so">
+</member>
+<member name="func_version" displayname="Get Asterisk Version/Build Info" remove_on_change="funcs/func_version.o funcs/func_version.so">
+</member>
+<member name="func_vmcount" displayname="Indicator for whether a voice mailbox has messages in a given folder." remove_on_change="funcs/func_vmcount.o funcs/func_vmcount.so">
+</member>
+<member name="func_volume" displayname="Technology independent volume control" remove_on_change="funcs/func_volume.o funcs/func_volume.so">
+</member>
+</category>
+<category name="MENUSELECT_PBX" displayname="PBX Modules" remove_on_change="pbx/modules.link">
+<member name="pbx_ael" displayname="Asterisk Extension Language Compiler" remove_on_change="pbx/pbx_ael.o pbx/pbx_ael.so">
+	<depend>res_ael_share</depend>
+</member>
+<member name="pbx_config" displayname="Text Extension Configuration" remove_on_change="pbx/pbx_config.o pbx/pbx_config.so">
+</member>
+<member name="pbx_dundi" displayname="Distributed Universal Number Discovery (DUNDi)" remove_on_change="pbx/pbx_dundi.o pbx/pbx_dundi.so">
+	<depend>zlib</depend>
+	<use>crypto</use>
+</member>
+<member name="pbx_gtkconsole" displayname="GTK Console" remove_on_change="pbx/pbx_gtkconsole.o pbx/pbx_gtkconsole.so">
+	<depend>gtk</depend>
+	<defaultenabled>no</defaultenabled>
+</member>
+<member name="pbx_loopback" displayname="Loopback Switch" remove_on_change="pbx/pbx_loopback.o pbx/pbx_loopback.so">
+</member>
+<member name="pbx_lua" displayname="Lua PBX Switch" remove_on_change="pbx/pbx_lua.o pbx/pbx_lua.so">
+	<depend>lua</depend>
+</member>
+<member name="pbx_realtime" displayname="Realtime Switch" remove_on_change="pbx/pbx_realtime.o pbx/pbx_realtime.so">
+</member>
+<member name="pbx_spool" displayname="Outgoing Spool Support" remove_on_change="pbx/pbx_spool.o pbx/pbx_spool.so">
+</member>
+</category>
+<category name="MENUSELECT_RES" displayname="Resource Modules" remove_on_change="res/modules.link">
+<member name="res_adsi" displayname="ADSI Resource" remove_on_change="res/res_adsi.o res/res_adsi.so">
+</member>
+<member name="res_ael_share" displayname="share-able code for AEL" remove_on_change="res/res_ael_share.o res/res_ael_share.so">
+</member>
+<member name="res_agi" displayname="Asterisk Gateway Interface (AGI)" remove_on_change="res/res_agi.o res/res_agi.so">
+</member>
+<member name="res_ais" displayname="SAForum AIS" remove_on_change="res/res_ais.o res/res_ais.so">
+	<depend>ais</depend>
+</member>
+<member name="res_clioriginate" displayname="Call origination from the CLI" remove_on_change="res/res_clioriginate.o res/res_clioriginate.so">
+</member>
+<member name="res_config_curl" displayname="Realtime Curl configuration" remove_on_change="res/res_config_curl.o res/res_config_curl.so">
+	<depend>curl</depend>
+</member>
+<member name="res_config_ldap" displayname="LDAP realtime interface" remove_on_change="res/res_config_ldap.o res/res_config_ldap.so">
+	<depend>ldap</depend>
+</member>
+<member name="res_config_odbc" displayname="Realtime ODBC configuration" remove_on_change="res/res_config_odbc.o res/res_config_odbc.so">
+	<depend>unixodbc</depend>
+	<depend>ltdl</depend>
+	<depend>res_odbc</depend>
+</member>
+<member name="res_config_pgsql" displayname="PostgreSQL RealTime Configuration Driver" remove_on_change="res/res_config_pgsql.o res/res_config_pgsql.so">
+	<depend>pgsql</depend>
+</member>
+<member name="res_config_sqlite" displayname="Realtime SQLite configuration" remove_on_change="res/res_config_sqlite.o res/res_config_sqlite.so">
+	<depend>sqlite</depend>
+</member>
+<member name="res_convert" displayname="File format conversion CLI command" remove_on_change="res/res_convert.o res/res_convert.so">
+</member>
+<member name="res_crypto" displayname="Cryptographic Digital Signatures" remove_on_change="res/res_crypto.o res/res_crypto.so">
+	<depend>ssl</depend>
+</member>
+<member name="res_curl" displayname="cURL Resource Module" remove_on_change="res/res_curl.o res/res_curl.so">
+	<depend>curl</depend>
+</member>
+<member name="res_http_post" displayname="HTTP POST support" remove_on_change="res/res_http_post.o res/res_http_post.so">
+	<depend>gmime</depend>
+</member>
+<member name="res_indications" displayname="Region-specific tones" remove_on_change="res/res_indications.o res/res_indications.so">
+</member>
+<member name="res_jabber" displayname="AJI - Asterisk Jabber Interface" remove_on_change="res/res_jabber.o res/res_jabber.so">
+	<depend>iksemel</depend>
+	<use>openssl</use>
+</member>
+<member name="res_limit" displayname="Resource limits" remove_on_change="res/res_limit.o res/res_limit.so">
+</member>
+<member name="res_monitor" displayname="Call Monitoring Resource" remove_on_change="res/res_monitor.o res/res_monitor.so">
+</member>
+<member name="res_musiconhold" displayname="Music On Hold Resource" remove_on_change="res/res_musiconhold.o res/res_musiconhold.so">
+	<conflict>win32</conflict>
+	<use>dahdi</use>
+</member>
+<member name="res_odbc" displayname="ODBC resource" remove_on_change="res/res_odbc.o res/res_odbc.so">
+	<depend>unixodbc</depend>
+	<depend>ltdl</depend>
+</member>
+<member name="res_phoneprov" displayname="HTTP Phone Provisioning" remove_on_change="res/res_phoneprov.o res/res_phoneprov.so">
+</member>
+<member name="res_realtime" displayname="Realtime Data Lookup/Rewrite" remove_on_change="res/res_realtime.o res/res_realtime.so">
+</member>
+<member name="res_smdi" displayname="Simplified Message Desk Interface (SMDI) Resource" remove_on_change="res/res_smdi.o res/res_smdi.so">
+</member>
+<member name="res_snmp" displayname="SNMP [Sub]Agent for Asterisk" remove_on_change="res/res_snmp.o res/res_snmp.so">
+	<depend>netsnmp</depend>
+</member>
+<member name="res_speech" displayname="Generic Speech Recognition API" remove_on_change="res/res_speech.o res/res_speech.so">
+</member>
+<member name="res_timing_dahdi" displayname="DAHDI Timing Interface" remove_on_change="res/res_timing_dahdi.o res/res_timing_dahdi.so">
+	<depend name="dahdi">DAHDI</depend>
+</member>
+<member name="res_timing_pthread" displayname="pthread Timing Interface" remove_on_change="res/res_timing_pthread.o res/res_timing_pthread.so">
+</member>
+</category>
+<category name="MENUSELECT_TEST" displayname="Test Modules" remove_on_change="tests/modules.link">
+<member name="test_dlinklists" displayname="Test Doubly-Linked Lists" remove_on_change="tests/test_dlinklists.o tests/test_dlinklists.so">
+	<defaultenabled>no</defaultenabled>
+</member>
+<member name="test_skel" displayname="Skeleton (sample) Test" remove_on_change="tests/test_skel.o tests/test_skel.so">
+	<defaultenabled>no</defaultenabled>
+</member>
+</category>
+	<category name="MENUSELECT_CFLAGS" displayname="Compiler Flags" positive_output="yes" remove_on_change=".lastclean">
+		<member name="DONT_OPTIMIZE" displayname="Disable Optimizations by the Compiler">
+		</member>
+		<member name="DEBUG_THREADS" displayname="Enable Thread Debugging">
+		</member>
+		<member name="STATIC_BUILD" displayname="Build static binaries">
+		</member>
+		<member name="LOADABLE_MODULES" displayname="Runtime module loading">
+			<defaultenabled>yes</defaultenabled>
+		</member>
+		<member name="LOW_MEMORY" displayname="Optimize for Low Memory Usage">
+		</member>
+		<member name="USE_HOARD_ALLOCATOR" displayname="Use the Hoard Memory Allocator instead of the default system one">
+			<defaultenabled>no</defaultenabled>
+			<depend>hoard</depend>
+		</member>
+		<member name="LOTS_OF_SPANS" displayname="More than 32 DAHDI spans">
+		</member>
+		<member name="RADIO_RELAX" displayname="Relax DTMF for Radio Applications">
+		</member>
+		<member name="G711_NEW_ALGORITHM" displayname="Use the NEW ulaw/alaw codecs (slower, but cleaner)">
+			<defaultenabled>no</defaultenabled>
+		</member>
+		<member name="G711_REDUCED_BRANCHING" displayname="New ulaw/alaw codec, reduced branching (might help it run faster in some architectures)">
+			<defaultenabled>yes</defaultenabled>
+			<depend>G711_NEW_ALGORITHM</depend>
+		</member>
+		<member name="TEST_CODING_TABLES" displayname="New ulaw/alaw codec, turn on table tests on init">
+			<depend>G711_NEW_ALGORITHM</depend>
+		</member>
+		<member name="TEST_TANDEM_TRANSCODING" displayname="New ulaw/alaw codec, turn on transcoding tests on init">
+			<depend>G711_NEW_ALGORITHM</depend>
+		</member>
+		<member name="DEBUG_CHANNEL_LOCKS" displayname="Debug Channel Locking">
+		</member>
+		<member name="MALLOC_DEBUG" displayname="Keep Track of Memory Allocations">
+		</member>
+		<member name="BUSYDETECT_TONEONLY" displayname="Enable additional comparision of only the tone duration not the silence part">
+			<conflict>BUSYDETECT_COMPARE_TONE_AND_SILENCE</conflict>
+			<defaultenabled>no</defaultenabled>
+		</member>
+		<member name="BUSYDETECT_COMPARE_TONE_AND_SILENCE" displayname="Assume that tone and silence have the same duration">
+			<conflict>BUSYDETECT_TONEONLY</conflict>
+			<defaultenabled>no</defaultenabled>
+		</member>
+		<member name="BUSYDETECT_DEBUG" displayname="Enable additional busy detection debugging">
+			<defaultenabled>no</defaultenabled>
+		</member>
+		<member name="IAX_OLD_FIND" displayname="Use the old, slow method of searching for IAX callnos">
+		</member>
+		<member name="INTEGER_CALLERID" displayname="Use the (less accurate) integer-based method for decoding FSK tones (for embedded systems)">
+		</member>
+	</category>
+<category name="MENUSELECT_OPTS_app_voicemail" displayname="Voicemail Build Options" positive_output="yes" remove_on_change="apps/app_voicemail.o apps/app_directory.o">
+	<member name="ODBC_STORAGE" displayname="Storage of Voicemail using ODBC">
+		<depend>unixodbc</depend>
+		<depend>ltdl</depend>
+		<conflict>IMAP_STORAGE</conflict>
+		<defaultenabled>no</defaultenabled>
+	</member>
+	<member name="IMAP_STORAGE" displayname="Storage of Voicemail using IMAP4">
+		<depend>imap_tk</depend>
+		<conflict>ODBC_STORAGE</conflict>
+		<use>ssl</use>
+		<defaultenabled>no</defaultenabled>
+	</member>
+</category>
+<category name="MENUSELECT_CFLAGS" displayname="Compiler Flags" positive_output="yes" remove_on_change=".lastclean">
+	<member name="RADIO_RTX" displayname="Build RTX/DTX Radio Programming">
+		<defaultenabled>no</defaultenabled>
+		<depend>chan_usbradio</depend>
+	</member>
+	<member name="RADIO_XPMRX" displayname="Build Experimental Radio Protocols">
+		<defaultenabled>no</defaultenabled>
+		<depend>chan_usbradio</depend>
+	</member>
+</category>
+	<category name="MENUSELECT_CFLAGS" displayname="Compiler Flags - Development">
+		<member name="MTX_PROFILE" displayname="Enable Code Profiling Using TSC Counters">
+		</member>
+		<member name="DEBUG_SCHEDULER" displayname="Enable Scheduler Debugging Output">
+		</member>
+		<member name="DEBUG_THREADLOCALS" displayname="Enable Thread-Local-Storage Debugging">
+		</member>
+		<member name="DETECT_DEADLOCKS" displayname="Detect Deadlocks">
+			<depend>DEBUG_THREADS</depend>
+		</member>
+		<member name="DUMP_SCHEDULER" displayname="Dump Scheduler Contents for Debugging">
+		</member>
+		<member name="TRACE_FRAMES" displayname="Trace Frame Allocations">
+		</member>
+		<member name="DO_CRASH" displayname="Crash on fatal errors">
+		</member>
+		<member name="THREAD_CRASH" displayname="Crash on mutex errors">
+		</member>
+		<member name="CHANNEL_TRACE" displayname="Enable CHANNEL(trace) function">
+		</member>
+	</category>
+	<category name="MENUSELECT_EMBED" displayname="Module Embedding" positive_output="yes" remove_on_change="main/asterisk">
+		<member name="APPS" displayname="Applications" remove_on_change="apps/*.o">
+			<depend>gnu_ld</depend>
+		</member>
+		<member name="CDR" displayname="Call Detail Recording" remove_on_change="cdr/*.o">
+			<depend>gnu_ld</depend>
+		</member>
+		<member name="CHANNELS" displayname="Channels" remove_on_change="channels/*.o channels/misdn/*.o">
+			<depend>gnu_ld</depend>
+		</member>
+		<member name="CODECS" displayname="Coders/Decoders" remove_on_change="codecs/*.o codecs/gsm/src/*.o codecs/ilbc/*.o codecs/lpc10/*.o codecs/gsm/lib/libgsm.a codecs/lpc10/liblpc10.a codecs/ilbc/libilbc.a codecs/g722/libg722.a">
+			<depend>gnu_ld</depend>
+		</member>
+		<member name="FORMATS" displayname="File Formats" remove_on_change="formats/*.o">
+			<depend>gnu_ld</depend>
+		</member>
+		<member name="FUNCS" displayname="Dialplan Functions" remove_on_change="funcs/*.o">
+			<depend>gnu_ld</depend>
+		</member>
+		<member name="PBX" displayname="PBX Functionality" remove_on_change="pbx/*.o pbx/ael/*.o">
+			<depend>gnu_ld</depend>
+		</member>
+		<member name="RES" displayname="Resource Modules" remove_on_change="res/*.o res/snmp/*.o">
+			<depend>gnu_ld</depend>
+		</member>
+	</category>
+	<category name="MENUSELECT_CORE_SOUNDS" displayname="Core Sound Packages" positive_output="yes">
+		<member name="CORE-SOUNDS-EN-WAV" displayname="English, WAV format">
+		</member>
+		<member name="CORE-SOUNDS-EN-ULAW" displayname="English, mu-Law format">
+		</member>
+		<member name="CORE-SOUNDS-EN-ALAW" displayname="English, a-Law format">
+		</member>
+		<member name="CORE-SOUNDS-EN-GSM" displayname="English, GSM format" >
+			<defaultenabled>yes</defaultenabled>
+		</member>
+		<member name="CORE-SOUNDS-EN-G729" displayname="English, G.729 format">
+		</member>
+		<member name="CORE-SOUNDS-EN-G722" displayname="English, G.722 format">
+		</member>
+		<member name="CORE-SOUNDS-EN-SLN16" displayname="English, Signed-linear 16kHz format">
+		</member>
+		<member name="CORE-SOUNDS-ES-WAV" displayname="Spanish, WAV format">
+		</member>
+		<member name="CORE-SOUNDS-ES-ULAW" displayname="Spanish, mu-Law format">
+		</member>
+		<member name="CORE-SOUNDS-ES-ALAW" displayname="Spanish, a-Law format">
+		</member>
+		<member name="CORE-SOUNDS-ES-GSM" displayname="Spanish, GSM format">
+		</member>
+		<member name="CORE-SOUNDS-ES-G729" displayname="Spanish, G.729 format">
+		</member>
+		<member name="CORE-SOUNDS-ES-G722" displayname="Spanish, G.722 format">
+		</member>
+		<member name="CORE-SOUNDS-ES-SLN16" displayname="Spanish, Signed-linear 16kHz format">
+		</member>
+		<member name="CORE-SOUNDS-FR-WAV" displayname="French, WAV format">
+		</member>
+		<member name="CORE-SOUNDS-FR-ULAW" displayname="French, mu-Law format">
+		</member>
+		<member name="CORE-SOUNDS-FR-ALAW" displayname="French, a-Law format">
+		</member>
+		<member name="CORE-SOUNDS-FR-GSM" displayname="French, GSM format">
+		</member>
+		<member name="CORE-SOUNDS-FR-G729" displayname="French, G.729 format">
+		</member>
+		<member name="CORE-SOUNDS-FR-G722" displayname="French, G.722 format">
+		</member>
+		<member name="CORE-SOUNDS-FR-SLN16" displayname="French, Signed-linear 16kHz format">
+		</member>
+	</category>
+	<category name="MENUSELECT_EXTRA_SOUNDS" displayname="Extras Sound Packages" positive_output="yes">
+		<member name="EXTRA-SOUNDS-EN-WAV" displayname="English, WAV format">
+		</member>
+		<member name="EXTRA-SOUNDS-EN-ULAW" displayname="English, mu-Law format">
+		</member>
+		<member name="EXTRA-SOUNDS-EN-ALAW" displayname="English, a-Law format">
+		</member>
+		<member name="EXTRA-SOUNDS-EN-GSM" displayname="English, GSM format" >
+		</member>
+		<member name="EXTRA-SOUNDS-EN-G729" displayname="English, G.729 format">
+		</member>
+		<member name="EXTRA-SOUNDS-EN-G722" displayname="English, G.722 format">
+		</member>
+	</category>
+</menu>