Reported by Trent Creekmore

DAHTOOL-73
Changed the output to match the command needed for installing init scripts.

.gitignore

@@ -1,16 +1,36 @@
+*~
 *.o
+*.lo
+*.a
+*.so
+*.la
 .*.o.d
 .*.lo.d
 *.asciidoc
 *.html
+.deps
+.libs
+.dirstamp
+.version
+/.pc
+Makefile
+Makefile.in
+auxdir/
 build_tools/menuselect-deps
+aclocal.m4
+autom4te.cache/
 autoconfig.h
+autoconfig.h.in
 config.log
 config.status
+config.guess
+config.ignore
+configure
 dahdi_cfg
 dahdi_diag
 dahdi_maint
 dahdi_monitor
+dahdi_pcap
 dahdi_scan
 dahdi_speed
 dahdi_test
@@ -22,17 +42,19 @@ hdlcgen
 hdlcstress
 hdlctest
 hdlcverify
-libtonezone.a
-libtonezone.so
+libtool
+m4/
 makeopts
 patgen
 patlooptest
 pattest
 sethdlc
+stamp-h1
 timertest
 tonezone.lo
 tonezones.txt
 version.c
+xpp/*.check
 xpp/.depend
 xpp/.octasic.depend
 xpp/.perlcheck
@@ -48,4 +70,10 @@ xpp/test_parse
 xpp/twinstar.8
 xpp/xpp_blink.8
 xpp/xpp_sync.8
+xpp/xtalk/xlist_test
+xpp/xtalk/xtalk_raw_test
+xpp/xtalk/xtalk_send
+xpp/xtalk/xtalk_test
+xpp/xtalk/xusb_test
+xpp/xtalk/xusb_test_bypath
 zonedata.lo

Makefile

@@ -1,390 +0,0 @@
-#
-# Makefile for DAHDI tools
-#
-# Copyright (C) 2001-2010 Digium, Inc.
-#
-#
-
-ifeq ($(strip $(foreach var,clean distclean dist-clean update,$(findstring $(var),$(MAKECMDGOALS)))),)
-endif
-
-ifeq ($(strip $(foreach var,clean distclean dist-clean update,$(findstring $(var),$(MAKECMDGOALS)))),)
- ifneq ($(wildcard makeopts),)
-  include makeopts
- endif
-endif
-
-SUBDIRS_UTILS_ALL:= ppp
-SUBDIRS_UTILS := xpp
-
-OPTFLAGS=-O2
-CFLAGS+=-I. $(OPTFLAGS) -g -fPIC -Wall -DBUILDING_TONEZONE #-DTONEZONE_DRIVER
-ifneq (,$(findstring ppc,$(UNAME_M)))
-CFLAGS+=-fsigned-char
-endif
-ifneq (,$(findstring x86_64,$(UNAME_M)))
-CFLAGS+=-m64
-endif
-
-ifeq ($(DAHDI_DEVMODE),yes)
-  CFLAGS+=-Werror -Wunused -Wundef $(DAHDI_DECLARATION_AFTER_STATEMENT) -Wmissing-format-attribute -Wformat-security #-Wformat=2
-endif
-
-ROOT_PREFIX=
-
-# extra cflags to build dependencies. Recursively expanded.
-MAKE_DEPS= -MD -MT $@ -MF .$(subst /,_,$@).d -MP
-
-CFLAGS+=$(DAHDI_INCLUDE)
-
-CHKCONFIG	:= $(wildcard /sbin/chkconfig)
-UPDATE_RCD	:= $(wildcard /usr/sbin/update-rc.d)
-ifeq (,$(DESTDIR))
-  ifneq (,$(CHKCONFIG))
-    ADD_INITD	:= $(CHKCONFIG) --add dahdi
-  else
-    ifneq (,$(UPDATE_RCD))
-      ADD_INITD	:= $(UPDATE_RCD) dahdi defaults 15 30
-    endif
-  endif
-endif
-
-INITRD_DIR	:= $(firstword $(wildcard $(DESTDIR)/etc/rc.d/init.d $(DESTDIR)/etc/init.d))
-ifneq (,$(INITRD_DIR))
-  INIT_TARGET	:= $(INITRD_DIR)/dahdi
-  COPY_INITD	:= install -D dahdi.init $(INIT_TARGET)
-endif
-
-RCCONF_FILE	= /etc/dahdi/init.conf
-MODULES_FILE	= /etc/dahdi/modules
-GENCONF_FILE	= /etc/dahdi/genconf_parameters
-MODPROBE_FILE	= /etc/modprobe.d/dahdi.conf
-BLACKLIST_FILE	= /etc/modprobe.d/dahdi.blacklist.conf
-BASH_COMP_DIR	= /etc/bash_completion.d
-BASH_COMP_FILE	= $(BASH_COMP_DIR)/dahdi
-
-NETSCR_DIR	:= $(firstword $(wildcard $(DESTDIR)/etc/sysconfig/network-scripts ))
-ifneq (,$(NETSCR_DIR))
-  NETSCR_TARGET	:= $(NETSCR_DIR)/ifup-hdlc
-  COPY_NETSCR	:= install -D ifup-hdlc $(NETSCR_TARGET)
-endif
-
-TOOLSVERSION=$(shell build_tools/make_version . dahdi/tools)
-
-LTZ_A:=libtonezone.a
-LTZ_A_OBJS:=zonedata.o tonezone.o version.o
-LTZ_SO:=libtonezone.so
-LTZ_SO_OBJS:=zonedata.lo tonezone.lo version.o
-LTZ_SO_MAJOR_VER:=2
-LTZ_SO_MINOR_VER:=0
-
-# sbindir, libdir, includedir and mandir are defined in makeopts
-# (from configure).
-BIN_DIR:=$(sbindir)
-LIB_DIR:=$(libdir)
-INC_DIR:=$(includedir)/dahdi
-MAN_DIR:=$(mandir)/man8
-DATA_DIR:=${datadir}/dahdi
-CONFIG_DIR:=$(sysconfdir)/dahdi
-CONFIG_FILE:=$(CONFIG_DIR)/system.conf
-UDEVRULES_DIR:=$(sysconfdir)/udev/rules.d
-
-# Utilities we build with a standard build procedure:
-UTILS		= dahdi_tool dahdi_test dahdi_monitor dahdi_speed sethdlc dahdi_cfg \
-		  fxstest fxotune dahdi_diag dahdi_scan
-
-# some tests:
-UTILS		+= patgen pattest patlooptest hdlcstress hdlctest hdlcgen \
-		   hdlcverify timertest dahdi_maint
-
-
-BINS:=fxotune dahdi_cfg dahdi_monitor dahdi_speed dahdi_test dahdi_scan dahdi_maint
-ifeq	(1,$(PBX_NEWT))
-	BINS	+= dahdi_tool
-endif
-ifeq	(1,$(PBX_HDLC))
-	BINS	+= sethdlc
-endif
-ASSIGNED_DATA_SCRIPTS:=\
-	dahdi_handle_device	\
-	dahdi_span_config	\
-	dahdi_auto_assign_compat	\
-	span_config.d/10-dahdi-cfg	\
-	span_config.d/20-fxotune	\
-	span_config.d/50-asterisk	\
-	handle_device.d/10-span-types	\
-	handle_device.d/20-span-assignments
-
-ASSIGNED_UTILS:=dahdi_span_assignments dahdi_span_types \
-	dahdi_waitfor_span_assignments
-ASSIGNED_CONF:=assigned-spans.conf.sample span-types.conf.sample
-
-MAN_PAGES:= \
-	$(wildcard $(BINS:%=doc/%.8)) \
-	$(wildcard $(ASSIGNED_UTILS:%=doc/%.8))
-
-TEST_BINS:=patgen pattest patlooptest hdlcstress hdlctest hdlcgen hdlcverify timertest dahdi_maint
-# All the man pages. Not just installed ones:
-GROFF_PAGES	:= $(wildcard doc/*.8 xpp/*.8)
-GROFF_HTML	:= $(GROFF_PAGES:%=%.html)
-
-GENERATED_DOCS	:= $(GROFF_HTML) README.html README.Astribank.html
-
-all: prereq programs
-
-libs: $(LTZ_SO) $(LTZ_A)
-
-utils-subdirs:
-	@for dir in $(SUBDIRS_UTILS); do \
-		$(MAKE) -C $$dir; \
-	done
-
-programs: libs utils
-
-utils: $(BINS) utils-subdirs
-
-version.c: FORCE
-	@TOOLSVERSION="${TOOLSVERSION}" build_tools/make_version_c > $@.tmp
-	@if cmp -s $@.tmp $@ ; then :; else \
-		mv $@.tmp $@ ; \
-	fi
-	@rm -f $@.tmp
-
-tests: $(TEST_BINS)
-
-$(UTILS): %: %.o
-
-$(UTILS): version.o
-
-%.o: %.c
-	$(CC) $(CFLAGS) $(MAKE_DEPS) -c -o $@ $<
-
-%.lo: %.c
-	$(CC) $(CFLAGS) $(MAKE_DEPS) -c -o $@ $<
-
-%: %.o
-	$(CC) $(LDFLAGS) $^ $(LIBS) -o $@
-
-prereq: config.status
-
-dahdi_tool: CFLAGS+=$(NEWT_INCLUDE)
-dahdi_tool: LIBS+=$(NEWT_LIB)
-
-dahdi_speed: CFLAGS+=-O0
-
-$(LTZ_A): $(LTZ_A_OBJS)
-	ar rcs $@ $^
-	ranlib $@
-
-$(LTZ_SO): $(LTZ_SO_OBJS)
-	$(CC) $(CFLAGS) -shared -Wl,-soname,$(LTZ_SO).$(LTZ_SO_MAJOR_VER).$(LTZ_SO_MINOR_VER) -o $@ $^ -lm
-
-dahdi_cfg: $(LTZ_A)
-dahdi_cfg: LIBS+=-lm -lpthread
-dahdi_pcap:
-	$(CC) $(CFLAGS) dahdi_pcap.c -lpcap -o $@ $<
-	
-
-fxstest: $(LTZ_SO)
-fxstest: LIBS+=-lm
-fxotune: LIBS+=-lm
-
-tonezones.txt: zonedata.c
-	perl -ne 'next unless (/\.(country|description) = *"([^"]*)/); \
-		print (($$1 eq "country")? "* $$2\t":"$$2\n");' $<  \
-	>$@
-
-%.asciidoc: %.sample
-	perl -n -e \
-		'if (/^#($$|\s)(.*)/){ if (!$$in_doc){print "\n"}; $$in_doc=1; print "$$2\n" } else { if ($$in_doc){print "\n"}; $$in_doc=0; print "  $$_" }' \
-		$< \
-	| perl -p -e 'if (/^  #?(\w+)=/ && ! exists $$cfgs{$$1}){my $$cfg = $$1; $$cfgs{$$cfg} = 1; s/^/\n[[cfg_$$cfg]]\n/}'  >$@
-
-docs: $(GENERATED_DOCS)
-
-genconf_parameters.sample: xpp/genconf_parameters
-	cp $< $@
-
-README.html: README system.conf.asciidoc init.conf.asciidoc tonezones.txt \
-  UPGRADE.txt genconf_parameters.asciidoc assigned-spans.conf.asciidoc \
-  span-types.conf.asciidoc
-	$(ASCIIDOC) -n -a toc -a toclevels=4 $<
-
-README.Astribank.html: xpp/README.Astribank
-	$(ASCIIDOC) -o $@ -n -a toc -a toclevels=4 $<
-
-# on Debian: this requires the full groff, not just groff-base.
-%.8.html: %.8
-	man -Thtml $^ >$@
-
-htmlman: $(GROFF_HTML)
-
-install: all install-programs
-	@echo "###################################################"
-	@echo "###"
-	@echo "### DAHDI tools installed successfully."
-	@echo "### If you have not done so before, install init scripts with:"
-	@echo "###"
-	@echo "###   make config"
-	@echo "###"
-	@echo "###################################################"
-
-install-programs: install-utils install-libs
-
-install-utils: utils install-utils-subdirs
-ifneq (,$(BINS))
-	install -d $(DESTDIR)$(BIN_DIR)
-	install  $(BINS) $(DESTDIR)$(BIN_DIR)/
-	install -d $(DESTDIR)$(MAN_DIR)
-	install -m 644 $(MAN_PAGES) $(DESTDIR)$(MAN_DIR)/
-endif
-ifeq (,$(wildcard $(DESTDIR)$(CONFIG_FILE)))
-	$(INSTALL) -d $(DESTDIR)$(CONFIG_DIR)
-	$(INSTALL) -m 644 system.conf.sample $(DESTDIR)$(CONFIG_FILE)
-endif
-	install -d $(DESTDIR)$(DATA_DIR)
-	tar cf - -C hotplug $(ASSIGNED_DATA_SCRIPTS) | tar xf - -C $(DESTDIR)$(DATA_DIR)/
-	install $(ASSIGNED_UTILS) $(DESTDIR)/$(BIN_DIR)/
-	install -m 644 $(ASSIGNED_CONF) $(DESTDIR)/$(CONFIG_DIR)/
-	install -d $(DESTDIR)$(BASH_COMP_DIR)
-	install -m 644 dahdi-bash-completion $(DESTDIR)$(BASH_COMP_FILE)
-
-install-libs: libs
-	$(INSTALL) -d -m 755 $(DESTDIR)/$(LIB_DIR)
-	$(INSTALL) -m 755 $(LTZ_A) $(DESTDIR)$(LIB_DIR)/
-	$(INSTALL) -m 755 $(LTZ_SO) $(DESTDIR)$(LIB_DIR)/$(LTZ_SO).$(LTZ_SO_MAJOR_VER).$(LTZ_SO_MINOR_VER)
-ifeq (,$(DESTDIR))
-	if [ `id -u` = 0 ]; then \
-		/sbin/ldconfig || : ;\
-	fi
-endif
-	rm -f $(DESTDIR)$(LIB_DIR)/$(LTZ_SO)
-	$(LN) -sf $(LTZ_SO).$(LTZ_SO_MAJOR_VER).$(LTZ_SO_MINOR_VER) \
-		$(DESTDIR)$(LIB_DIR)/$(LTZ_SO).$(LTZ_SO_MAJOR_VER)
-	$(LN) -sf $(LTZ_SO).$(LTZ_SO_MAJOR_VER).$(LTZ_SO_MINOR_VER) \
-		$(DESTDIR)$(LIB_DIR)/$(LTZ_SO)
-	# Overwrite the 1.0 links out there.  dahdi-tools 2.0.0 installed
-	# 1.0 links but dahdi-tools changed them to 2.0 in order to explicitly
-	# break applications linked with zaptel.  But, this also meant that
-	# applications linked with libtonezone.so.1.0 broke when dahdi-tools
-	# 2.1.0 was installed.
-	$(LN) -sf $(LTZ_SO).$(LTZ_SO_MAJOR_VER).$(LTZ_SO_MINOR_VER) \
-		$(DESTDIR)$(LIB_DIR)/$(LTZ_SO).1.0
-	$(LN) -sf $(LTZ_SO).$(LTZ_SO_MAJOR_VER).$(LTZ_SO_MINOR_VER) \
-		$(DESTDIR)$(LIB_DIR)/$(LTZ_SO).1
-ifneq (no,$(USE_SELINUX))
-  ifeq (,$(DESTDIR))
-	/sbin/restorecon -v $(DESTDIR)$(LIB_DIR)/$(LTZ_SO)
-  endif
-endif
-	$(INSTALL) -d -m 755 $(DESTDIR)/$(INC_DIR)
-	$(INSTALL) -m 644 tonezone.h $(DESTDIR)$(INC_DIR)/
-
-install-utils-subdirs:
-	@for dir in $(SUBDIRS_UTILS); do \
-		$(MAKE) -C $$dir install; \
-	done
-
-install-tests: tests
-ifneq (,$(TEST_BINS))
-	install -d $(DESTDIR)$(BIN_DIR)
-	install  $(TEST_BINS) $(DESTDIR)$(BIN_DIR)/
-endif
-
-config:
-ifneq (,$(COPY_INITD))
-	$(COPY_INITD)
-endif
-ifeq (,$(wildcard $(DESTDIR)$(RCCONF_FILE)))
-	$(INSTALL) -D -m 644 init.conf.sample $(DESTDIR)$(RCCONF_FILE)
-endif
-ifeq (,$(wildcard $(DESTDIR)$(MODULES_FILE)))
-	$(INSTALL) -D -m 644 modules.sample $(DESTDIR)$(MODULES_FILE)
-endif
-ifeq (,$(wildcard $(DESTDIR)$(GENCONF_FILE)))
-	$(INSTALL) -D -m 644 xpp/genconf_parameters $(DESTDIR)$(GENCONF_FILE)
-endif
-ifeq (,$(wildcard $(DESTDIR)$(MODPROBE_FILE)))
-	$(INSTALL) -D -m 644 modprobe.conf.sample $(DESTDIR)$(MODPROBE_FILE)
-endif
-ifeq (,$(wildcard $(DESTDIR)$(BLACKLIST_FILE)))
-	$(INSTALL) -D -m 644 blacklist.sample $(DESTDIR)$(BLACKLIST_FILE)
-endif
-	$(INSTALL) -d $(DESTDIR)$(UDEVRULES_DIR)
-	$(INSTALL) -D -m 644 dahdi.rules $(DESTDIR)$(UDEVRULES_DIR)/
-ifneq (,$(COPY_NETSCR))
-	$(COPY_NETSCR)
-endif
-ifneq (,$(ADD_INITD))
-	$(ADD_INITD)
-endif
-	@echo "DAHDI has been configured."
-	@echo ""
-	@echo "List of detected DAHDI devices:"
-	@echo ""
-	@if [ `xpp/dahdi_hardware | tee /dev/stderr | wc -l` -eq 0 ]; then \
-		echo "No hardware found"; \
-	else \
-		echo ""; \
-		echo "run 'dahdi_genconf modules' to load support for only " ;\
-		echo "the DAHDI hardware installed in this system.  By "; \
-		echo "default support for all DAHDI hardware is loaded at "; \
-		echo "DAHDI start. "; \
-	fi
-
-update:
-	@if [ -d .svn ]; then \
-		echo "Updating from Subversion..." ; \
-		svn update | tee update.out; \
-		rm -f .version; \
-		if [ `grep -c ^C update.out` -gt 0 ]; then \
-			echo ; echo "The following files have conflicts:" ; \
-			grep ^C update.out | cut -b4- ; \
-		fi ; \
-		rm -f update.out; \
-	else \
-		echo "Not under version control";  \
-	fi
-
-dist:
-	@./build_tools/make_dist "dahdi-tools" "$(TOOLSVERSION)"
-
-clean:
-	rm -f $(BINS) $(TEST_BINS)
-	rm -f *.o dahdi_cfg tzdriver sethdlc
-	rm -f $(LTZ_SO) $(LTZ_A) *.lo
-	@for dir in $(SUBDIRS_UTILS_ALL); do \
-		$(MAKE) -C $$dir clean; \
-	done
-	@for dir in $(SUBDIRS_UTILS); do \
-		$(MAKE) -C $$dir clean; \
-	done
-	rm -f libtonezone*
-	rm -f fxotune
-	rm -f core
-	rm -f dahdi_cfg-shared fxstest
-	rm -rf $(GENERATED_DOCS) *.asciidoc tonezones.txt
-	rm -f dahdi_pcap
-
-distclean: dist-clean
-
-dist-clean: clean
-	rm -f makeopts
-	rm -f config.log config.status
-	rm -f .*.d
-
-config.status: configure
-	@CFLAGS="" ./configure
-	@echo "****"
-	@echo "**** The configure script was just executed, so 'make' needs to be"
-	@echo "**** restarted."
-	@echo "****"
-	@exit 1
-
-.PHONY: distclean dist-clean clean all install programs tests devel data config update install-programs install-libs install-utils-subdirs utils-subdirs prereq dist
-
-FORCE:
-
-ifneq ($(wildcard .*.d),)
-   include .*.d
-endif

Makefile.am

@@ -0,0 +1,197 @@
+ACLOCAL_AMFLAGS	= -I m4
+
+LEGACY_MAKE	= \
+	 $(MAKE) -f $(srcdir)/Makefile.legacy \
+		top_srcdir=$(top_srcdir) \
+		srcdir=$(srcdir)
+
+CFLAGS	+= -g -Wall -O2 $(DAHDI_INCLUDE)
+if DAHDI_DEVMODE
+CFLAGS	+= \
+	-Werror \
+	-Wunused \
+	-Wundef \
+	$(DAHDI_DECLARATION_AFTER_STATEMENT) \
+	-Wmissing-format-attribute \
+	-Wformat-security \
+	#-Wformat=2
+endif
+
+SUBDIRS	= xpp doc hotplug
+
+if PPPD
+SUBDIRS	+= ppp
+endif
+
+noinst_HEADERS	= \
+	bittest.h	\
+	dahdi_tools_version.h	\
+	fxotune.h	\
+	wavformat.h	\
+	#
+
+sbin_PROGRAMS	= \
+	dahdi_test \
+	dahdi_maint \
+	dahdi_monitor \
+	dahdi_cfg \
+	dahdi_speed \
+	dahdi_scan \
+	fxotune
+
+noinst_PROGRAMS	= \
+	fxstest \
+	patgen \
+	pattest \
+	patlooptest \
+	dahdi_diag \
+	timertest
+
+dist_sbin_SCRIPTS	= \
+	dahdi_span_assignments \
+	dahdi_waitfor_span_assignments \
+	dahdi_span_types
+
+if PBX_HDLC
+sbin_PROGRAMS	+= sethdlc
+noinst_PROGRAMS += hdlcstress hdlctest hdlcgen hdlcverify
+endif
+
+# Libtool versioning for libtonezone:
+# Bump when interface changes
+LTZ_CURRENT	= 2
+# Bump if interface change is backward compatible
+LTZ_AGE		= 0
+# Bump if only implementation change
+LTZ_REVISION	= 0
+
+lib_LTLIBRARIES		= libtonezone.la
+
+libtonezone_la_SOURCES	= \
+	zonedata.c \
+	tonezone.c \
+	version.c
+dahdiinclude_HEADERS	= tonezone.h
+libtonezone_la_CFLAGS	= $(CFLAGS) -I$(srcdir) -DBUILDING_TONEZONE
+libtonezone_la_LDFLAGS	= -version-info "$(LTZ_CURRENT):$(LTZ_REVISION):$(LTZ_AGE)"
+libtonezone_la_LIBADD	= -lm
+
+if PBX_PCAP
+noinst_PROGRAMS		+= dahdi_pcap
+dahdi_pcap_LDADD	= -lpcap
+endif
+
+patlooptest_LDADD	= libtonezone.la
+fxstest_LDADD		= libtonezone.la
+fxotune_LDADD		= -lm
+dahdi_speed_CFLAGS	= -O2
+
+dahdi_maint_SOURCES	= dahdi_maint.c version.c
+
+if PBX_NEWT
+sbin_PROGRAMS		+= dahdi_tool
+dahdi_tool_CFLAGS	= $(CFLAGS) $(NEWT_INCLUDE)
+dahdi_tool_LDADD	= $(NEWT_LIB)
+endif
+
+dahdi_cfg_LDFLAGS	= -lpthread
+dahdi_cfg_LDADD		= libtonezone.la
+
+udevrulesdir	= @udevrulesdir@
+udevrules_DATA	= dahdi.rules
+
+all-local:
+	$(LEGACY_MAKE)  all
+
+clean-local:
+	$(LEGACY_MAKE) clean
+
+install-exec-hook:
+	$(LEGACY_MAKE) install
+	@echo "Compatibility symlinks (should be removed in the future)"
+	ln -sf libtonezone.so.2.0.0 $(DESTDIR)$(libdir)/libtonezone.so.2.0
+
+bashcompdir	= $(sysconfdir)/bash_completion.d
+
+install-data-hook:
+	mkdir -p $(DESTDIR)$(bashcompdir)
+	install -m 644 $(srcdir)/dahdi-bash-completion $(DESTDIR)$(bashcompdir)/dahdi
+
+# Handle these files specially -- install them only with 'install-config'
+special_config_files	= \
+	init.conf.sample	\
+	blacklist.sample	\
+	modprobe.conf.sample	\
+	#
+
+install-config:
+	mkdir -p $(DESTDIR)$(dahdiconfdir)
+	mkdir -p $(DESTDIR)$(sysconfdir)/modprobe.d
+	install -m644 xpp/genconf_parameters $(DESTDIR)$(dahdiconfdir)/genconf_parameters
+	install -m644 init.conf.sample $(DESTDIR)$(dahdiconfdir)/init.conf
+	install -m644 blacklist.sample $(DESTDIR)$(sysconfdir)/modprobe.d/dahdi-blacklist.conf
+	install -m644 modprobe.conf.sample $(DESTDIR)$(sysconfdir)/modprobe.d/dahdi.conf
+	$(LEGACY_MAKE) config
+
+dahdiconfdir	= @sysconfdir@/dahdi
+dahdiconf_DATA	= \
+	system.conf.sample	\
+	assigned-spans.conf.sample	\
+	span-types.conf.sample	\
+	modules.sample	\
+	#
+
+build_scripts	= \
+	build_tools/dahdi_svn_tarball	\
+	build_tools/dahdi_sysfs_copy	\
+	build_tools/dump_sys_state	\
+	build_tools/make_firmware_object.in	\
+	build_tools/make_tree	\
+	build_tools/make_version	\
+	build_tools/test_kernel_git	\
+	build_tools/uninstall-modules	\
+	#
+
+.version:
+	if ./build_tools/make_version . dahdi/tools > $@.tmp; then \
+		mv "$@.tmp" "$@"; \
+	fi
+
+uninstall-hook:
+	$(RM) $(DESTDIR)$(sysconfdir)/dahdi/span-types.conf.sample
+	$(RM) $(DESTDIR)$(sysconfdir)/dahdi/assigned-spans.conf.sample
+	$(RM) $(DESTDIR)$(sysconfdir)/dahdi/system.conf
+	$(RM) $(DESTDIR)$(bashcompdir)/dahdi
+
+docs:
+	$(LEGACY_MAKE)  $@
+
+DISTCLEANFILES	= makeopts config.log config.status .*.d
+
+MAINTAINERCLEANFILES	= \
+		m4/libtool.m4 \
+		m4/ltoptions.m4 \
+		m4/ltsugar.m4 \
+		m4/ltversion.m4 \
+		m4/lt~obsolete.m4 \
+		#
+
+EXTRA_DIST	= \
+	.version	\
+	LICENSE	\
+	LICENSE.LGPL	\
+	UPGRADE.txt	\
+	bootstrap.sh	\
+	Makefile.legacy	\
+	dahdi.init	\
+	dahdi.xml	\
+	dahdi_pcap.c	\
+	ifup-hdlc	\
+	dahdi-bash-completion	\
+	$(special_config_files)	\
+	$(dahdiconf_DATA)	\
+	$(udevrules_DATA)	\
+	$(build_scripts)	\
+	#
+
+.PHONY: docs config

Makefile.legacy

@@ -0,0 +1,133 @@
+#
+# Makefile for DAHDI tools
+#
+# Copyright (C) 2001-2010 Digium, Inc.
+#
+#
+
+ifeq ($(strip $(foreach var,clean,$(findstring $(var),$(MAKECMDGOALS)))),)
+endif
+
+ifeq ($(strip $(foreach var,clean,$(findstring $(var),$(MAKECMDGOALS)))),)
+ ifneq ($(wildcard makeopts),)
+  include makeopts
+ endif
+endif
+
+CHKCONFIG	:= $(wildcard /sbin/chkconfig)
+UPDATE_RCD	:= $(wildcard /usr/sbin/update-rc.d)
+ifeq (,$(DESTDIR))
+  ifneq (,$(CHKCONFIG))
+    ADD_INITD	:= $(CHKCONFIG) --add dahdi
+  else
+    ifneq (,$(UPDATE_RCD))
+      ADD_INITD	:= $(UPDATE_RCD) dahdi defaults 15 30
+    endif
+  endif
+endif
+
+INITRD_DIR	:= $(firstword $(wildcard $(DESTDIR)/etc/rc.d/init.d $(DESTDIR)/etc/init.d))
+ifneq (,$(INITRD_DIR))
+  INIT_TARGET	:= $(INITRD_DIR)/dahdi
+  COPY_INITD	:= install -D dahdi.init $(INIT_TARGET)
+endif
+
+NETSCR_DIR	:= $(firstword $(wildcard $(DESTDIR)/etc/sysconfig/network-scripts ))
+ifneq (,$(NETSCR_DIR))
+  NETSCR_TARGET	:= $(NETSCR_DIR)/ifup-hdlc
+  COPY_NETSCR	:= install -D ifup-hdlc $(NETSCR_TARGET)
+endif
+
+# sbindir, libdir, includedir and mandir are defined in makeopts
+# (from configure).
+LIB_DIR:=$(libdir)
+
+# All the man pages. Not just installed ones:
+GROFF_PAGES	:= $(wildcard doc/*.8 xpp/*.8)
+GROFF_HTML	:= $(GROFF_PAGES:%=%.html)
+
+GENERATED_DOCS	:= $(GROFF_HTML) README.html README.Astribank.html
+
+all:
+
+tonezones.txt: zonedata.c
+	perl -ne 'next unless (/\.(country|description) = *"([^"]*)/); \
+		print (($$1 eq "country")? "* $$2\t":"$$2\n");' $<  \
+	>$@
+
+%.asciidoc: %.sample
+	perl -n -e \
+		'if (/^#($$|\s)(.*)/){ if (!$$in_doc){print "\n"}; $$in_doc=1; print "$$2\n" } else { if ($$in_doc){print "\n"}; $$in_doc=0; print "  $$_" }' \
+		$< \
+	| perl -p -e 'if (/^  #?(\w+)=/ && ! exists $$cfgs{$$1}){my $$cfg = $$1; $$cfgs{$$cfg} = 1; s/^/\n[[cfg_$$cfg]]\n/}'  >$@
+
+docs: $(GENERATED_DOCS)
+
+genconf_parameters.sample: xpp/genconf_parameters
+	cp $< $@
+
+README.html: README system.conf.asciidoc init.conf.asciidoc tonezones.txt \
+  UPGRADE.txt genconf_parameters.asciidoc assigned-spans.conf.asciidoc \
+  span-types.conf.asciidoc
+	TZ=UTC $(ASCIIDOC) -n -a toc -a toclevels=4 $<
+
+README.Astribank.html: xpp/README.Astribank
+	TZ=UTC $(ASCIIDOC) -o $@ -n -a toc -a toclevels=4 $<
+
+# on Debian: this requires the full groff, not just groff-base.
+%.8.html: %.8
+	man -Thtml $^ >$@
+
+htmlman: $(GROFF_HTML)
+
+install: all install-programs
+	@echo "###################################################"
+	@echo "###"
+	@echo "### DAHDI tools installed successfully."
+	@echo "### If you have not done so before, install init scripts with:"
+	@echo "###"
+	@echo "###   make install-config"
+	@echo "###"
+	@echo "###################################################"
+
+install-programs: install-libs
+
+install-libs:
+ifneq (no,$(USE_SELINUX))
+  ifeq (,$(DESTDIR))
+	/sbin/restorecon -v $(DESTDIR)$(LIB_DIR)/$(LTZ_SO)
+  endif
+endif
+
+config:
+ifneq (,$(COPY_INITD))
+	$(COPY_INITD)
+endif
+ifneq (,$(COPY_NETSCR))
+	$(COPY_NETSCR)
+endif
+ifneq (,$(ADD_INITD))
+	$(ADD_INITD)
+endif
+	@echo "DAHDI has been configured."
+	@echo ""
+	@echo "List of detected DAHDI devices:"
+	@echo ""
+	@if [ `xpp/dahdi_hardware | tee /dev/stderr | wc -l` -eq 0 ]; then \
+		echo "No hardware found"; \
+	else \
+		echo ""; \
+		echo "run 'dahdi_genconf modules' to load support for only " ;\
+		echo "the DAHDI hardware installed in this system.  By "; \
+		echo "default support for all DAHDI hardware is loaded at "; \
+		echo "DAHDI start. "; \
+	fi
+
+clean:
+	rm -f *.o tzdriver
+	rm -f core
+	rm -rf $(GENERATED_DOCS) *.asciidoc tonezones.txt
+
+.PHONY: clean all install devel data config install-programs install-libs
+
+FORCE:

README

@@ -15,8 +15,9 @@ dahdi-linux before building dahdi-tools.
 Build System
 ~~~~~~~~~~~~
 GCC and friends. Generally you will need to install the package gcc.
-There may be cases where you will need a specific version of gcc to build
-kernel modules.
+
+Autotools (autoconf, automake and libtool) are needed if you clone from
+Git.
 
 
 Extra Libraries
@@ -24,20 +25,25 @@ Extra Libraries
 Some libraries are needed for extra utilities that are provided with
 DAHDI.
 
-- libusb is needed for building fpga_load, needed for firmware loading of
-  the Xorcom Astribank.
+- libusb is needed for building astribank_hexload, needed for firmware
+  loading of the Xorcom Astribank.
 - libnewt is needed to build the optional but useful utility dahdi_tool.
+- libpcap is needed for building dahdi_pcap.
+- pppd is needed to build the dahdi pppd plugin.
 
 
 Installation
 ~~~~~~~~~~~~
 Note: If using `sudo` to build/install, you may need to add /sbin to your PATH.
 ----------------------------------
+# Only if you cloned from git:
+autoreconf -i
+
 ./configure
 make
 make install
-# To install init scripts and config files:
-#make config
+# To install some extra configuration files:
+#make install-config
 ----------------------------------
 
 
@@ -49,18 +55,11 @@ There are some make targets that are provided to build or install just
 parts of DAHDI:
 
 . Build targets:
-  - make: Build DAHDI user-space programs and libraries. partial
-    targets of it:
-    * make 'utilname': builds 'utilname' alone (e.g: `make dahdi_diag`)
-    * make utils: Build just the programs.
-    * make libs: Build libtonezone.
-    * make tests: Build testing binaries.
+  - make: Build DAHDI user-space programs and libraries.
+  - make docs: Generate some extra documentation files.
 . Install targets:
-  - make install: Install everything. Sub-targets of it:
-    * make install-utils: Installs most things.
-    * make install-libs: Installs libtonezone.
-  - make config: install configuration files (overriding existing ones).
-  - make install-test: Install testing binaries.
+  - make install: Install everything
+  - make install-config: install configuration files
 
 
 Installation to a Subtree
@@ -76,8 +75,8 @@ This can be useful for any partial install target from the list above.
 
 Options For ./configure
 ^^^^^^^^^^^^^^^^^^^^^^^
-The configure script executes various tests and based on them generates
-makeopts. You can pass it --with options and variable settings, for
+The configure script executes various tests and the build will depend on
+their result. You can pass it --with options and variable settings, for
 instance:
 
   ./configure --without-ncurses CC="gcc-4.10"
@@ -117,6 +116,29 @@ The configuration file of the dahdi init.d script is
 /etc/dahdi/init.conf . That file is used to override defaults that are 
 set at the beginning of the init.d script.
 
+/etc/dahdi/assigned-spans.conf
+~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+Assigns span number and initial channel number for spans in each device.
+Just like system.conf it may be generated with dahdi_genconf:
+
+  dahdi_span_assignments auto
+  dahdi_genconf
+
+It may also be edited manually to allow reserving span and channel
+numbers for specific devices.
+
+/etc/dahdi/span-types.conf
+~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+Theoretically, this file is similar to assigned-spans.conf. It allows
+setting the type (E1/T1) of a "PRI" span. This cannot be configured
+anywhere else: it needs to be done before the span is assigned as it
+changes the number of channels the span has.
+
+In practice most systems don't mix E1 and T1 and thus this file will
+typically have at most a single wild-card line setting all cards to be
+either E1 or T1.
+
+
 Reference Configuration
 ~~~~~~~~~~~~~~~~~~~~~~~
 Sample system.conf

autoconfig.h.in

@@ -1,114 +0,0 @@
-/* autoconfig.h.in.  Generated from configure.ac by autoheader.  */
-
-/* Define if your system has the DAHDI headers. */
-#undef HAVE_DAHDI
-
-/* Define if your system has the DAHDI23 headers. */
-#undef HAVE_DAHDI23
-
-/* Define DAHDI23 headers version */
-#undef HAVE_DAHDI23_VERSION
-
-/* Define DAHDI headers version */
-#undef HAVE_DAHDI_VERSION
-
-/* Define to 1 if you have the <inttypes.h> header file. */
-#undef HAVE_INTTYPES_H
-
-/* Define to 1 if you have the <linux/soundcard.h> header file. */
-#undef HAVE_LINUX_SOUNDCARD_H
-
-/* Define to 1 if you have the <memory.h> header file. */
-#undef HAVE_MEMORY_H
-
-/* Define this to indicate the ${NEWT_DESCRIP} library */
-#undef HAVE_NEWT
-
-/* Define to indicate the ${NEWT_DESCRIP} library version */
-#undef HAVE_NEWT_VERSION
-
-/* Define to 1 if you have the `semtimedop' function. */
-#undef HAVE_SEMTIMEDOP
-
-/* Define to 1 if you have the <stdint.h> header file. */
-#undef HAVE_STDINT_H
-
-/* Define to 1 if you have the <stdlib.h> header file. */
-#undef HAVE_STDLIB_H
-
-/* Define to 1 if you have the <strings.h> header file. */
-#undef HAVE_STRINGS_H
-
-/* Define to 1 if you have the <string.h> header file. */
-#undef HAVE_STRING_H
-
-/* Define to 1 if you have the <sys/soundcard.h> header file. */
-#undef HAVE_SYS_SOUNDCARD_H
-
-/* Define to 1 if you have the <sys/stat.h> header file. */
-#undef HAVE_SYS_STAT_H
-
-/* Define to 1 if you have the <sys/types.h> header file. */
-#undef HAVE_SYS_TYPES_H
-
-/* Define to 1 if you have the <unistd.h> header file. */
-#undef HAVE_UNISTD_H
-
-/* Define this to indicate the ${USB_DESCRIP} library */
-#undef HAVE_USB
-
-/* Define to indicate the ${USB_DESCRIP} library version */
-#undef HAVE_USB_VERSION
-
-/* Define to the address where bug reports for this package should be sent. */
-#undef PACKAGE_BUGREPORT
-
-/* Define to the full name of this package. */
-#undef PACKAGE_NAME
-
-/* Define to the full name and version of this package. */
-#undef PACKAGE_STRING
-
-/* Define to the one symbol short name of this package. */
-#undef PACKAGE_TARNAME
-
-/* Define to the home page for this package. */
-#undef PACKAGE_URL
-
-/* Define to the version of this package. */
-#undef PACKAGE_VERSION
-
-/* Define to 1 if you have the ANSI C header files. */
-#undef STDC_HEADERS
-
-/* Enable extensions on AIX 3, Interix.  */
-#ifndef _ALL_SOURCE
-# undef _ALL_SOURCE
-#endif
-/* Enable GNU extensions on systems that have them.  */
-#ifndef _GNU_SOURCE
-# undef _GNU_SOURCE
-#endif
-/* Enable threading extensions on Solaris.  */
-#ifndef _POSIX_PTHREAD_SEMANTICS
-# undef _POSIX_PTHREAD_SEMANTICS
-#endif
-/* Enable extensions on HP NonStop.  */
-#ifndef _TANDEM_SOURCE
-# undef _TANDEM_SOURCE
-#endif
-/* Enable general extensions on Solaris.  */
-#ifndef __EXTENSIONS__
-# undef __EXTENSIONS__
-#endif
-
-
-/* Define to 1 if on MINIX. */
-#undef _MINIX
-
-/* Define to 2 if the system does not provide POSIX.1 features except with
-   this defined. */
-#undef _POSIX_1_SOURCE
-
-/* Define to 1 if you need to in order for `stat' and other things to work. */
-#undef _POSIX_SOURCE

build_tools/make_dist

@@ -1,26 +0,0 @@
-#! /bin/sh
-
-if [ "$#" -ne 2 ]; then
-	echo >&2 "Usage: $0 <package> <version>"
-	exit 1
-fi
-package="$1"
-version="$2"
-tarball_prefix="$package-$version"
-echo "I: Making dist tarball for $tarball_prefix"
-tarball_name="$tarball_prefix.tar.gz"
-
-tmp_work_dir=".tmp"
-tmp_version_dir="$tmp_work_dir/$tarball_prefix"
-
-if [ "$DESTDIR" != '' ]; then
-	destdir="$DESTDIR/"
-fi
-output="$destdir$tarball_name"
-
-mkdir -p "$tmp_version_dir"
-git archive --format tar HEAD | tar xf - -C "$tmp_version_dir"
-echo "$version" > "$tmp_version_dir/.version"
-tar czf "$output" -C "$tmp_work_dir" "$tarball_prefix"
-rm -rf "$tmp_work_dir"
-echo "I: tarball is ready: '$output'"

build_tools/make_version

@@ -68,6 +68,8 @@ elif [ -d ${1}/.git ]; then
             # options.
             VERSION=GIT-`git rev-parse --short --verify HEAD`${MODIFIED}
         fi
+	VERSION=${VERSION##*/}    # Remove leading slashes: upsteram/2.10.2
+	VERSION=${VERSION#[1-9]%} # Remove 1% from tag (tag from Debian epoch)
         echo ${VERSION}
     else
         PARTS=`LANG=C git log --pretty=full | grep -F "git-svn-id:" | head -1 | awk '{print $2;}' | sed -e s:^.*/svn/$2/:: | sed -e 's:/: :g' | sed -e 's/@.*$//g'`

build_tools/make_version_c

@@ -1,10 +0,0 @@
-#!/bin/sh
-cat << END
-/*
- * version.c
- * Automatically generated
- */
-
-const char dahdi_tools_version[] = "DAHDI Tools Version - ${TOOLSVERSION}";
-
-END

configure.ac

@@ -2,29 +2,65 @@
 
 AC_PREREQ(2.59)
  
-m4_define([TOOLSVERSION],
+m4_define([short_version],
           m4_bpatsubst(m4_esyscmd([build_tools/make_version . dahdi/tools]),
                        [\([0-9.]*\)\(\w\|\W\)*],
                        [\1]))
-AC_INIT(dahdi, TOOLSVERSION, www.asterisk.org)
+AC_INIT([dahdi-tools], short_version, [www.asterisk.org])
 
 # check existence of the package
 AC_CONFIG_SRCDIR([dahdi_cfg.c])
+AC_CONFIG_AUX_DIR([auxdir])
+AC_CONFIG_MACRO_DIR([m4])
+AM_INIT_AUTOMAKE([foreign subdir-objects])
+
+build_version=`build_tools/make_version . dahdi/tools`
+AC_SUBST([BUILD_VERSION], "$build_version")
+
+# enable nice build output on automake1.11
+m4_pattern_allow([AM_DEFAULT_VERBOSITY])
+m4_ifdef([AM_SILENT_RULES],[AM_SILENT_RULES([yes])],[AM_DEFAULT_VERBOSITY=1])
+AM_CONDITIONAL([SILENT_RULES], [test "$AM_DEFAULT_VERBOSITY" = '0'])
 
 AC_COPYRIGHT("dahdi-tools")
 AC_REVISION($Revision$)
 
-ac_default_prefix=/usr
-if test ${sysconfdir} = '${prefix}/etc'; then
-   sysconfdir=/etc
-fi
-if test ${mandir} = '${prefix}/man'; then
-   mandir=/usr/share/man
-fi
+# Preserve old defaults if called without --prefix or --prefix=/usr
+#  prefix=/usr
+#  sysconfdir=/etc
 
-if test ${localstatedir} = '${prefix}/var'; then
-     localstatedir=/var
+ac_default_prefix=/usr
+if test "$prefix" = 'NONE' -o "$prefix" = '/usr'; then
+	if test ${sysconfdir} = '${prefix}/etc'; then
+	   sysconfdir=/etc
+	fi
+	if test ${mandir} = '${prefix}/man'; then
+	   mandir=/usr/share/man
+	fi
+
+	if test ${localstatedir} = '${prefix}/var'; then
+	     localstatedir=/var
+	fi
 fi
+AC_SUBST([dahditoolsdir], ['${datadir}/dahdi'])
+AC_SUBST([dahdiincludedir], ['${includedir}/dahdi'])
+
+# Where to install udev rules?
+#  * Our default is $sysconfdir/udev/rules.d:
+#    - This preserve legacy location.
+#    - It doesn't write into modern vendor supplied location (/lib/udev/rules.d)
+#    - It doesn't break "make distcheck" (where everything should be relative
+#      to prefix.
+#  * Packagers are encouraged to use --udevrules=/lib/udev/rules.d
+#
+m4_define([_UDEV_RULES_DIR_DEFAULT], [${sysconfdir}/udev/rules.d])dnl
+AC_ARG_WITH(udevrules,
+	[AS_HELP_STRING([--with-udevrules=PATH],
+		[Location of UDEV rules @<:@default=]_UDEV_RULES_DIR_DEFAULT[@:>@])],
+	[udevrulesdir=$withval],
+	[udevrulesdir=]'_UDEV_RULES_DIR_DEFAULT'
+)
+AC_SUBST([udevrulesdir], "$udevrulesdir")
 
 # specify output header file
 AC_CONFIG_HEADER(autoconfig.h)
@@ -32,15 +68,18 @@ AC_CONFIG_HEADER(autoconfig.h)
 # This needs to be before any macros that use the C compiler
 AC_GNU_SOURCE
 
-AC_CHECK_HEADERS([sys/soundcard.h linux/soundcard.h])
-
 AC_CHECK_TOOL([LD], [ld])
 
 # Checks for programs.
+AC_PROG_CXX
 AC_PROG_CC
 AC_PROG_CPP
+AM_PROG_CC_C_O
 AC_PROG_INSTALL
 AC_PROG_LN_S
+AC_PROG_MAKE_SET
+AC_PROG_AWK
+AC_PROG_LIBTOOL
 AST_CHECK_GNU_MAKE
 
 test_obj=conftest.o
@@ -70,6 +109,35 @@ AC_SUBST(DOWNLOAD)
 
 AC_LANG(C)
 
+AC_PATH_PROG([PERL], [perl])
+if test "$PERL" = ''; then
+	      AC_MSG_ERROR(perl is mandatory)
+fi
+# Where to install perl modules?
+#  * Packagers are encouraged to use the result of "perl -V:vendorlib"
+#  * Our default is:
+#    - The result of "perl -V:sitelib" for our default prefix (/usr)
+#    - The "$datadir/perl5" directory otherwise (e.g: during "make distcheck")
+#
+AC_MSG_CHECKING(for perl libdir)
+m4_define([_PERL_LIBDIR_DEFAULT], [${datadir}/perl5])dnl
+AC_ARG_WITH(perllib,
+	[AS_HELP_STRING([--with-perllib=PATH],
+		[Location of perl modules @<:@default=]_PERL_LIBDIR_DEFAULT[, or perl -V:sitelib@:>@])],
+	[perllibdir=$withval],
+	[
+		if test "$prefix" = 'NONE' -o "$prefix" = '/usr'; then
+			eval `"$PERL" -V:sitelib`
+			perllibdir="$sitelib"
+		else
+			perllibdir='_PERL_LIBDIR_DEFAULT'
+		fi
+	]
+)
+AC_SUBST([perllibdir], "$perllibdir")
+AC_MSG_RESULT([$perllibdir])
+AM_CONDITIONAL([PERL], [test "$perllibdir" != ''])
+
 AC_ARG_ENABLE(dev-mode,
 	[  --enable-dev-mode    Turn on developer mode],
 	[case "${enableval}" in
@@ -78,6 +146,7 @@ AC_ARG_ENABLE(dev-mode,
 	      *) AC_MSG_ERROR(bad value ${enableval} for --enable-dev-mode)  ;;
 	esac])
 AC_SUBST(DAHDI_DEVMODE)
+AM_CONDITIONAL([DAHDI_DEVMODE], [test "$DAHDI_DEVMODE" = 'yes'])
 
 AC_MSG_CHECKING(for -Wdeclaration-after-statement support)
 if $(${CC} -Wdeclaration-after-statement -S -o /dev/null -xc /dev/null > /dev/null 2>&1); then
@@ -89,17 +158,104 @@ else
 fi
 AC_SUBST(DAHDI_DECLARATION_AFTER_STATEMENT)
 
+# Checks for header files.
+AC_CHECK_HEADERS([sys/soundcard.h linux/soundcard.h])
+AC_CHECK_HEADERS([arpa/inet.h fcntl.h limits.h netinet/in.h stdint.h stdlib.h string.h sys/ioctl.h sys/param.h sys/socket.h sys/time.h syslog.h unistd.h])
+
+# Checks for typedefs, structures, and compiler characteristics.
+AC_C_INLINE
+AC_TYPE_SIZE_T
+AC_TYPE_SSIZE_T
+AC_TYPE_UINT16_T
+AC_TYPE_UINT32_T
+AC_TYPE_UINT8_T
+
+# Checks for libraries.
+AC_CHECK_LIB([m], [cos])
+AC_CHECK_LIB([pthread], [pthread_create])
+
 AST_EXT_LIB_SETUP([DAHDI], [DAHDI], [dahdi])
 AST_EXT_LIB_SETUP([NEWT], [newt], [newt])
 AST_EXT_LIB_SETUP([USB], [usb], [usb])
+AST_EXT_LIB_SETUP([PCAP], [pcap], [pcap])
 
 AST_C_DEFINE_CHECK([DAHDI], [DAHDI_CODE], [dahdi/user.h])
 DAHDI23_DIR="${DAHDI_DIR}"
 AST_C_DEFINE_CHECK([DAHDI23], [DAHDI_CONFIG_NTTE], [dahdi/user.h])
 AST_EXT_LIB_CHECK([NEWT], [newt], [newtBell], [newt.h])
 AST_EXT_LIB_CHECK([USB], [usb], [usb_init], [usb.h])
+AST_EXT_LIB_CHECK([PCAP], [pcap], [pcap_compile], [pcap.h])
+
+saved_CPPFLAGS="$CPPFLAGS"
+CPPFLAGS="$CPPFLAGS $DAHDI_INCLUDE"
+AC_CHECK_DECL([DAHDI_TXMIRROR], [DAHDI_TXMIRROR=1], [DAHDI_TXMIRROR=0], [#include <dahdi/user.h>])
+CPPFLAGS="$saved_CPPFLAGS"
+
+AM_CONDITIONAL([PBX_NEWT], [test "$PBX_NEWT" = "1"])
+AM_CONDITIONAL([PBX_PCAP], [test "$PBX_PCAP" = "1" -a "$DAHDI_TXMIRROR" = "1"])
 
 AC_CHECK_FUNCS([semtimedop])
+AC_CHECK_FUNCS([alarm bzero gettimeofday memset pow regcomp select socket strcasecmp strchr strdup strerror strrchr strstr strtol strtoul])
+AC_FUNC_ERROR_AT_LINE
+AC_FUNC_MALLOC
+
+# What the user asked for? libusb/libusbx
+AC_ARG_WITH([libusbx],
+	[AS_HELP_STRING([--without-libusbx], [Disable libusbx @<:@default=check@:>@])],
+	[],
+	[with_libusbx=check])
+AC_ARG_WITH([libusb],
+	[AS_HELP_STRING([--without-libusb], [Disable libusb-0.1 @<:@default=check@:>@])],
+	[],
+	[with_libusb=check])
+
+# LIBUSBX tests
+have_libusbx=
+AS_IF([test "$with_libusbx" != "no"],
+	[PKG_CHECK_MODULES([LIBUSBX], [libusb-1.0],
+		[AC_CHECK_LIB([usb-1.0], [libusb_error_name],
+			[
+				have_libusbx="yes"
+				AC_DEFINE([HAVE_LIBUSBX], [1], [Define to 1 if you have <libusb.h>.])
+				AC_SUBST([PBX_USB], [1])
+			], [
+				if test "$with_libusbx" != "yes"; then
+					AC_MSG_NOTICE([Ignoring old libusb-1.0, trying fallback to old libusb])
+				fi
+			])
+		], [:])
+	], [])
+
+AS_IF([test "$with_libusbx" = "yes" -a "$have_libusbx" = ""],
+	[AC_MSG_ERROR([No libusbx found (--with-libusbx was given)])])
+
+# LIBUSB tests
+have_libusb=
+AS_IF([test "$with_libusb" != "no"],
+	[AS_IF([test "$have_libusbx" != ""],
+		[
+			AS_IF([test "$with_libusbx" = "check"], [
+				AC_MSG_NOTICE([Skipping LIBUSB tests (have good LIBUSBX)])
+				])
+		], [
+			PKG_CHECK_MODULES([LIBUSB], [libusb],
+				[
+					have_libusb="yes"
+					AC_SUBST([PBX_USB], [1])
+				]
+				[AC_DEFINE([HAVE_LIBUSB], [1], [Define to 1 if you have <usb.h>.])],
+				[:]
+				)
+		])
+	], [])
+
+AS_IF([test "$with_libusb" = "yes" -a "$have_libusb" = ""],
+	[AC_MSG_ERROR([No libusb found (--with-libusb was given)])])
+
+AM_CONDITIONAL([LIBUSBX], [test "$have_libusbx" != ""])
+AM_CONDITIONAL([LIBUSB], [test "$have_libusb" != ""])
+AM_CONDITIONAL([PBX_USB], [test "$PBX_USB" = "1"])
+
 
 PBX_HDLC=0
 AC_MSG_CHECKING([for GENERIC_HDLC_VERSION version 4 in linux/hdlc.h])
@@ -138,6 +294,7 @@ if test "x${PBX_HDLC}" != "x1"; then
 fi
 
 AC_SUBST(PBX_HDLC)
+AM_CONDITIONAL([PBX_HDLC], [test "$PBX_HDLC" = "1"])
 
 AC_ARG_WITH(selinux,
 	[AS_HELP_STRING([--with-selinux],
@@ -193,6 +350,9 @@ case "$with_ppp" in
 	;;
 esac
 
+AC_SUBST(PPPD_VERSION)
+AM_CONDITIONAL([PPPD], [test "$PPPD_VERSION" != ''])
+
 if test "x${PBX_DAHDI}" != "x1"; then
    AC_MSG_NOTICE([***])
    AC_MSG_NOTICE([*** Building this package requires DAHDI support. *** ])
@@ -211,7 +371,26 @@ fi
 
 AC_SUBST(PPPD_VERSION)
 
-AC_CONFIG_FILES([makeopts])
+# Taken from octasic-helper
+AC_SUBST([USE_OCTASIC], [yes])
+AM_CONDITIONAL([USE_OCTASIC], [test "$USE_OCTASIC" = 'yes'])
+octasic_dir='$(top_srcdir)/xpp/oct612x'
+AC_SUBST([OCTASIC_CFLAGS], ["-I$octasic_dir/include -I$octasic_dir/octdeviceapi -I$octasic_dir/octdeviceapi/oct6100api"])
+
+AC_SUBST([TOOLSVERSION], m4_esyscmd([build_tools/make_version . dahdi/tools]))
+
+AC_CONFIG_FILES([
+	makeopts
+	version.c
+	Makefile
+	doc/Makefile
+	hotplug/Makefile
+	ppp/Makefile
+	xpp/Makefile
+	xpp/xtalk/Makefile
+	xpp/oct612x/Makefile
+	xpp/perl_modules/Makefile
+	])
 AC_OUTPUT
 
 AC_MSG_NOTICE(*** dahdi-tools build successfully configured ***)

dahdi-bash-completion

@@ -48,7 +48,7 @@ __dahdi_span_types() {
 	has_cmd=0
 	for (( i=0; i < COMP_CWORD; i++)); do
 		case "${COMP_WORDS[$i]}" in
-		dumpconfig | list | set)
+		dumpconfig | list | set | compare)
 			has_cmd=1
 			break
 			;;
@@ -69,7 +69,7 @@ __dahdi_span_types() {
 					grep -l '[EJT]1' /sys/devices/pci0000:00/0000:00:10.4/usb1/1-1/xbus-00/*/spantype 2>/dev/null | sed -e 's|/spantype||') )
 			else
 				COMPREPLY=( ${COMPREPLY[@]} $(compgen -W \
-					'dumpconfig list set' -- $cur) )
+					'dumpconfig list set compare' -- $cur) )
 			fi
 			;;
 		esac

dahdi.init

@@ -144,6 +144,14 @@ hotplug_exit_after_load() {
 
 # Initialize the Xorcom Astribank (xpp/) using perl utiliites:
 xpp_startup() {
+	if [ "$ASTERISK_SUPPORTS_DAHDI_HOTPLUG" = yes ]; then
+		aas_param='/sys/module/dahdi/parameters/auto_assign_spans'
+		aas=`cat "$aas_param" 2>/dev/null`
+		if [ "$aas" = 0 ]; then
+			echo 1>&2 "Don't wait for Astribanks (use Asterisk hotplug-support)"
+			return 0
+		fi
+	fi
 	# do nothing if there are no astribank devices:
 	if ! /usr/share/dahdi/waitfor_xpds; then return 0; fi
 

dahdi_cfg.c

@@ -90,11 +90,9 @@ static struct dahdi_lineconfig lc[DAHDI_MAX_SPANS];
 
 static struct dahdi_chanconfig cc[DAHDI_MAX_CHANNELS];
 
-static int current_span = 0;
 static int only_span = 0;
 static int restrict_channels = 0;
 static int selected_channels[DAHDI_MAX_CHANNELS];
-static int chan2span[DAHDI_MAX_CHANNELS];
 static int declared_spans[DAHDI_MAX_SPANS];
 
 static struct dahdi_attach_echocan ae[DAHDI_MAX_CHANNELS];
@@ -333,20 +331,9 @@ static char *trim(char *buf)
 
 static int skip_channel(int x)
 {
-	int	spanno = chan2span[x];
-
 	if (restrict_channels) {
 		if (!selected_channels[x])
 			return 1;
-		/* sanity check */
-		if (only_span) {
-			if (spanno != 0 && only_span != spanno) {
-				fprintf(stderr,
-					"Only span %d. Skip selected channel %d from span %d\n",
-					only_span, x, spanno);
-				return 1;
-			}
-		}
 	} else {
 		if (only_span && !declared_spans[only_span]) {
 			fprintf(stderr,
@@ -354,8 +341,6 @@ static int skip_channel(int x)
 				only_span);
 			exit(1);
 		}
-		if (only_span && only_span != spanno)
-			return 1;
 	}
 	return 0;
 }
@@ -442,7 +427,6 @@ int spanconfig(char *keyword, char *args)
 		error("Span number should be a valid span number, not '%s'\n", realargs[0]);
 		return -1;
 	}
-	current_span = span;
 	declared_spans[span] = 1;
 	res = sscanf(realargs[1], "%d", &timing);
 	if ((res != 1) || (timing < 0) || (timing > MAX_TIMING)) {
@@ -615,7 +599,6 @@ static int chanconfig(char *keyword, char *args)
 	int master=0;
 	int dacschan = 0;
 	char *idle;
-	int is_digital;
 	bzero(chans, sizeof(chans));
 	strtok(args, ":");
 	idle = strtok(NULL, ":");
@@ -627,7 +610,6 @@ static int chanconfig(char *keyword, char *args)
 	if (res <= 0)
 		return -1;
 	for (x=1;x<DAHDI_MAX_CHANNELS;x++) {
-		is_digital = 0;
 		if (chans[x]) {
 			if (slineno[x]) {
 				error("Channel %d already configured as '%s' at line %d\n", x, sig[x], slineno[x]);
@@ -673,7 +655,6 @@ static int chanconfig(char *keyword, char *args)
 					return -1;
 				cc[x].sigtype = DAHDI_SIG_CAS;
 				sig[x] = sigtype_to_str(cc[x].sigtype);
-				is_digital = 1;
 			} else if (!strcasecmp(keyword, "dacs")) {
 				/* Setup channel for monitor */
 				cc[x].idlebits = dacschan;
@@ -684,7 +665,6 @@ static int chanconfig(char *keyword, char *args)
 				cc[dacschan].sigtype = DAHDI_SIG_DACS;
 				sig[x] = sigtype_to_str(cc[dacschan].sigtype);
 				dacschan++;
-				is_digital = 1;
 			} else if (!strcasecmp(keyword, "dacsrbs")) {
 				/* Setup channel for monitor */
 				cc[x].idlebits = dacschan;
@@ -694,7 +674,6 @@ static int chanconfig(char *keyword, char *args)
 				cc[dacschan].idlebits = x;
 				cc[dacschan].sigtype = DAHDI_SIG_DACS_RBS;
 				sig[x] = sigtype_to_str(cc[dacschan].sigtype);
-				is_digital = 1;
 				dacschan++;
 			} else if (!strcasecmp(keyword, "unused")) {
 				cc[x].sigtype = 0;
@@ -702,7 +681,6 @@ static int chanconfig(char *keyword, char *args)
 			} else if (!strcasecmp(keyword, "indclear") || !strcasecmp(keyword, "bchan")) {
 				cc[x].sigtype = DAHDI_SIG_CLEAR;
 				sig[x] = sigtype_to_str(cc[x].sigtype);
-				is_digital = 1;
 			} else if (!strcasecmp(keyword, "clear")) {
 				sig[x] = sigtype_to_str(DAHDI_SIG_CLEAR);
 				if (master) {
@@ -712,7 +690,6 @@ static int chanconfig(char *keyword, char *args)
 					cc[x].sigtype = DAHDI_SIG_CLEAR;
 					master = x;
 				}
-				is_digital = 1;
 			} else if (!strcasecmp(keyword, "rawhdlc")) {
 				sig[x] = sigtype_to_str(DAHDI_SIG_HDLCRAW);
 				if (master) {
@@ -722,7 +699,6 @@ static int chanconfig(char *keyword, char *args)
 					cc[x].sigtype = DAHDI_SIG_HDLCRAW;
 					master = x;
 				}
-				is_digital = 1;
 			} else if (!strcasecmp(keyword, "nethdlc")) {
 				sig[x] = sigtype_to_str(DAHDI_SIG_HDLCNET);
 				memset(cc[x].netdev_name, 0, sizeof(cc[x].netdev_name));
@@ -736,7 +712,6 @@ static int chanconfig(char *keyword, char *args)
 					}
 					master = x;
 				}
-				is_digital = 1;
 			} else if (!strcasecmp(keyword, "fcshdlc")) {
 				sig[x] = sigtype_to_str(DAHDI_SIG_HDLCFCS);
 				if (master) {
@@ -746,19 +721,15 @@ static int chanconfig(char *keyword, char *args)
 					cc[x].sigtype = DAHDI_SIG_HDLCFCS;
 					master = x;
 				}
-				is_digital = 1;
 			} else if (!strcasecmp(keyword, "dchan")) {
 				sig[x] = "D-channel";
 				cc[x].sigtype = DAHDI_SIG_HDLCFCS;
-				is_digital = 1;
 			} else if (!strcasecmp(keyword, "hardhdlc")) {
 				sig[x] = "Hardware assisted D-channel";
 				cc[x].sigtype = DAHDI_SIG_HARDHDLC;
-				is_digital = 1;
 			} else if (!strcasecmp(keyword, "mtp2")) {
 				sig[x] = "MTP2";
 				cc[x].sigtype = DAHDI_SIG_MTP2;
-				is_digital = 1;
 			} else {
 				fprintf(stderr, "Huh? (%s)\n", keyword);
 			}
@@ -770,11 +741,6 @@ static int chanconfig(char *keyword, char *args)
 					fprintf(stderr, "WARNING: idlebits are not valid on %s channels.\n", sig[x]);
 				}
 			}
-
-			if (is_digital) 
-				chan2span[x] = current_span;
-			else
-				current_span = 0;
 		}
 	}
 	return 0;
@@ -1617,6 +1583,10 @@ int main(int argc, char *argv[])
 		fprintf(stderr, "%s\n", dahdi_tools_version);
 	}
 
+	if (!restrict_channels && only_span) {
+		error("-S requires -C\n");
+		goto finish;
+	}
 	if (!restrict_channels && !only_span) {
 		bool all_assigned = wait_for_all_spans_assigned(5);
 

dahdi_span_assignments

@@ -66,6 +66,8 @@ usage() {
 	echo >&2 "         add        - assign spans, according to /etc/dahdi/assigned-spans.conf"
 	echo >&2 "         remove     - unassign spans"
 	echo >&2 "         list       - human-readable list of all spans"
+	echo >&2 "         matched    - found spans matched in configuration"
+	echo >&2 "         unmatched  - found spans not matched in configuration"
 	echo >&2 "         dumpconfig - dump current state as new configuration"
 	echo >&2 ""
 	echo >&2 "       options:"
@@ -109,7 +111,7 @@ while true ; do
 		break
 		;;
 	*)
-		echo "Internal error!"
+		echo >&2 "Internal error!"
 		exit 1
 		;;
 	esac
@@ -215,10 +217,10 @@ unassign_all_spans() {
 			sort | while read spandir; do
 			local_spanno=`cat "$spandir/local_spanno"`
 			if [ "$dry_run" = true ]; then
-				echo "(dry-run) unassign $device $local_spanno"
+				echo >&2 "(dry-run) unassign $device $local_spanno"
 				continue
 			fi
-			echo "unassign $device $local_spanno"
+			echo >&2 "unassign $device $local_spanno"
 			if ! echo "$local_spanno" > "$device/unassign_span"; then
 				echo >&2 "$0: failed unassigning '$local_spanno' in '$device'"
 			fi
@@ -245,12 +247,12 @@ assign_device_spans() {
 		if [ -d "$span" ]; then
 			span_local_spanno=`cat "$span/local_spanno"`
 			if [ "$span_local_spanno" != "$local_spanno" ]; then
-				echo "WARNING: $span_local_spanno != $local_spanno"
+				echo >&2 "WARNING: $span_local_spanno != $local_spanno"
 			fi
-			echo "$device [$local_spanno] already assigned to span $spanno. Skipping..."
+			echo >&2 "$device [$local_spanno] already assigned to span $spanno. Skipping..."
 			continue
 		fi
-		echo "assign $device: $s"
+		echo >&2 "assign $device: $s"
 		if ! echo "$s" > "$device/assign_span"; then
 			echo >&2 "$0: failed assigning '$s' to '$device'"
 		fi
@@ -267,21 +269,21 @@ match_device() {
 		# We use case to enable shell-style globbing in configuration
 		case "$hardware_id" in
 		$id)
-			[ "$verbose" = true ] && echo "match by hwid ($id ~ $hardware_id): $spanspecs"
+			[ "$verbose" = true ] && echo >&2 "match by hwid ($id ~ $hardware_id): $spanspecs"
 			assign_device_spans "$device"
 			;;
 		esac
 		# We use case to enable shell-style globbing in configuration
 		case "$location" in
 		$id)
-			[ "$verbose" = true ] && echo "match by location ($id ~ $location): $spanspecs"
+			[ "$verbose" = true ] && echo >&2 "match by location ($id ~ $location): $spanspecs"
 			assign_device_spans "$device"
 			;;
 		esac
 		# We use case to enable shell-style globbing in configuration
 		case "$devpath" in
 		$id)
-			[ "$verbose" = true ] && echo "match by devpath ($id ~ $devpath): $spanspecs"
+			[ "$verbose" = true ] && echo >&2 "match by devpath ($id ~ $devpath): $spanspecs"
 			assign_device_spans "$device"
 			;;
 		esac
@@ -293,7 +295,7 @@ assign_devices() {
 		echo >&2 "$0: Missing '$DAHDISASSIGNEDSPANSCONF'"
 		exit 1
 	fi
-	echo "using '$DAHDISASSIGNEDSPANSCONF'"
+	echo >&2 "using '$DAHDISASSIGNEDSPANSCONF'"
 	for device in $DEVICES
 	do
 		match_device "$device"
@@ -303,13 +305,71 @@ assign_devices() {
 auto_assign_devices() {
 	for device in $DEVICES
 	do
-		echo "auto-assign $device"
+		echo >&2 "auto-assign $device"
 		if [ "$dry_run" != true ]; then
 			echo 1 > "$device/auto_assign"
 		fi
 	done
 }
 
+dev_match_conf() {
+	local devpath="$1"
+	local location="$2"
+	local hardware_id="$3"
+	local local_spanno="$4"
+	filter_conf | while read id spanspecs
+	do
+		spanno=`echo "$spanspecs" | cut -d: -f1`
+		match_dev=no
+		# We use case to enable shell-style globbing in configuration
+		case "$hardware_id" in
+		$id)
+			match_dev=yes
+			;;
+		esac
+		# We use case to enable shell-style globbing in configuration
+		case "$location" in
+		$id)
+			match_dev=yes
+			;;
+		esac
+		# We use case to enable shell-style globbing in configuration
+		case "$devpath" in
+		$id)
+			match_dev=yes
+			;;
+		esac
+		if [ "$match_dev" = 'yes' -a "$local_spanno" = "$spanno" ]; then
+			#printf "%-8s (%s) %-14s %s %s\n" "$local_spanno" "$spanno" "[$hardware_id]" "$location" "$devpath"
+			echo "[$hardware_id]:$local_spanno"
+		fi
+	done
+}
+
+list_devices() {
+	wanted="$1"
+	if [ ! -f "$DAHDISASSIGNEDSPANSCONF" ]; then
+		echo >&2 "$0: Missing '$DAHDISASSIGNEDSPANSCONF'"
+		exit 1
+	fi
+	echo >&2 "using '$DAHDISASSIGNEDSPANSCONF'"
+	for device in $DEVICES
+	do
+		devpath=`cd "$device" && pwd -P`
+		location='@'`attr_clean "$device/location"`
+		hardware_id=`attr_clean "$device/hardware_id"`
+		for local_spanno in `cut -d: -f1 "$device/spantype"`
+		do
+			found=`dev_match_conf "$devpath" "$location" "$hardware_id" "$local_spanno"`
+			if [ "$wanted" = "unmatched" ]; then
+				[ -z "$found" ] && echo "[$hardware_id]:$local_spanno"
+			else
+				[ -z "$found" ] || echo "[$hardware_id]:$local_spanno"
+			fi
+		done
+	done
+}
+
 case "$action" in
 auto)
 	auto_assign_devices
@@ -326,6 +386,12 @@ list)
 dumpconfig)
 	dump_config
 	;;
+matched)
+	list_devices "matched"
+	;;
+unmatched)
+	list_devices "unmatched"
+	;;
 *)
 	echo >&2 "Bad action='$action'"
 	usage

dahdi_span_types

@@ -69,6 +69,7 @@ usage() {
 	echo >&2 "Usage: $0 [options] action [devpath ...]"
 	echo >&2 "       action:"
 	echo >&2 "         set        - set spans to E1/T1 according to /etc/dahdi/span-types.conf"
+	echo >&2 "         compare    - show config values that differ from system"
 	echo >&2 "         list       - human-readable list of all spans"
 	echo >&2 "         dumpconfig - dump current state in /etc/dahdi/span-types.conf format"
 	echo >&2 ""
@@ -88,6 +89,8 @@ if [ $? != 0 ]; then
 	usage
 fi
 
+compare=false
+
 # Note the quotes around `$TEMP': they are essential!
 eval set -- "$TEMP"
 
@@ -321,13 +324,26 @@ handle_span() {
 					echo >&2 "Set $devname span $spanno = $val"
 				fi
 				if [ "$dry_run" != 'true' ]; then
-					echo "$spanno:$val" > "$attr_file"
+					if [ "$compare" = 'true' ]; then
+						config="$spanno:$val"
+						system=`grep "$spanno:" "$attr_file"`
+						if [ "$config" != "$system" ]; then
+
+							active_val=`echo $system | cut -d: -f2`
+							echo "$devname $spanno     $val     $active_val" >>"$compare_results_file"
+						fi
+					else
+						echo "$spanno:$val" > "$attr_file"
+					fi
 				fi
 			fi
 		done
 }
 
 set_all_devices() {
+	span_differs='false'
+	SPANS_DIFFER='false'
+
 	if [ ! -f "$DAHDISPANTYPESCONF" ]; then
 		echo >&2 "$0: Missing configuration '$DAHDISPANTYPESCONF'"
 		exit 1
@@ -348,6 +364,16 @@ set_all_devices() {
 			esac
 		done
 	done
+	if [ "$compare" = 'true' ]; then
+		if [ -s "$compare_results_file" ]; then
+			echo "# Device           Unit  Config Active"
+			cat "$compare_results_file"
+			rm -f "$compare_results_file"
+			exit 5
+		fi
+		rm -f "$compare_results_file"
+		exit 0
+	fi
 }
 
 case "$action" in
@@ -360,6 +386,11 @@ dumpconfig)
 set)
 	set_all_devices
 	;;
+compare)
+	compare=true
+	compare_results_file=`mktemp`
+	set_all_devices
+	;;
 *)
 	usage
 	;;

dahdi_test.c

@@ -64,7 +64,7 @@ void hup_handler(int sig)
 	printf("\n--- Results after %d passes ---\n", pass);
 	printf("Best: %.3f%% -- Worst: %.3f%% -- Average: %f%%\n",
 			best, worst, pass ? total/pass : 100.00);
-	printf("Cummulative Accuracy (not per pass): %0.3f\n",
+	printf("Cumulative Accuracy (not per pass): %0.3f\n",
 	       pass ? accuracy : 0.0);
 	exit(0);
 }

doc/Makefile.am

@@ -0,0 +1,19 @@
+man_MANS	= \
+	dahdi_cfg.8 \
+	dahdi_maint.8 \
+	dahdi_monitor.8 \
+	dahdi_scan.8 \
+	dahdi_span_assignments.8 \
+	dahdi_span_types.8 \
+	dahdi_test.8 \
+	dahdi_tool.8 \
+	dahdi_waitfor_span_assignments.8 \
+	fxotune.8
+
+noinst_MANS	= \
+	dahdi_diag.8 \
+	fxstest.8 \
+	patgen.8 \
+	pattest.8
+
+EXTRA_DIST	= $(man_MANS) $(noinst_MANS)

doc/dahdi_cfg.8

@@ -41,10 +41,8 @@ Only shutdown spans.
 
 .B \-S \fISPAN
 .RS
-Only apply changes to span no. \fISPAN\fR. For a digital span (with
-a 'span=' line in the configuration file) this will do. For an analog
-span you'll have to explicitly tell dahdi_cfg the range of channels,
-using \-C .
+Only apply changes to span no. \fISPAN\fR. You also need to specify the
+range of channels in the span explicitly with \-C.
 .RE
 
 .B \-f

doc/dahdi_span_types.8

@@ -4,7 +4,7 @@
 dahdi_span_types \- set line modes of DAHDI spans before assignment
 .SH SYNOPSIS
 
-.B dahdi_span_types [\fIoptions\fB] <list|dumpconfig|set> \fB[\fIdevpath \fB...]
+.B dahdi_span_types [\fIoptions\fB] <list|dumpconfig|compare|set> \fB[\fIdevpath \fB...]
 
 .SH DESCRIPTION
 The span type (the line mode: E1/T1/J1) must be set to a span before
@@ -58,6 +58,16 @@ device(s) specified in the command line (or all devices, if none
 specified).
 .RE
 
+.B compare
+.RS
+Compare the settings on the system to those in the configuration file.
+For each line that applies to a device on the system, print it if the
+value to be set and the active value on the system differ.
+
+The exit status is 0 if there is no difference and non-zero if a
+difference was detected.
+.RE
+
 .B list
 .RS
 List line modes for all spans in the system which may be set with

doc/dahdi_tool.8

@@ -7,7 +7,7 @@ dahdi_tool \- Shows status of DAHDI interfaces
 .B dahdi_tool
 
 .SH DESCRIPTION
-dahdi_tool shows the current status the DAHDI inteface cards plugged 
+dahdi_tool shows the current status the DAHDI interface cards plugged 
 to the computer.
 
 It displays values like Current Alarms, SyncSource, Tx/Rx

doc/fxotune.8

@@ -33,7 +33,7 @@ is generated in the current directory.
 fxotune just reads the settings from fxotune.conf into the FXO modules.
 
 You are advised to run fxotune on all FXO ports you have that support 
-it and that are connected. Note that the tunning is affected by e.g.
+it and that are connected. Note that the tuning is affected by e.g.
 the physical parameters of the connection, and thus if it has been 
 radically changed, you may need to re-run fxotune.
 
@@ -44,7 +44,7 @@ cards and clones) do not have the hardware to support such tuning.
 The tuning process needs a clear line to do the tuning.  In order to do
 that, it runs in cycles of the following: sets the line off-hook, dials
 a dial string (which should set the PSTN provider waiting for the next
-digit), and then starts tuning. It has a limited ammount of time for
+digit), and then starts tuning. It has a limited amount of time for
 tuning before the PSTN gives up and gives a busy tone. So after a while
 it hangs up and starts a new cycle.
 
@@ -180,7 +180,7 @@ so if you stop it half-way, you may get a half-configured system. If you
 have already tuned your FXO channels and wish to test-run fxotune again, 
 you are advised to backup /etc/fxotune.conf .
 
-The default for \-m is 18 seconds. This asusmes that you get a clear line 
+The default for \-m is 18 seconds. This assumes that you get a clear line 
 for at least 18 seconds. It is advised that you test that timeout earlier
 by connecting a phone to the FXO line, dialing 4 (or whatever dial string 
 you put with \-n) and see how much time of silence you have.

hdlcgen.c

@@ -40,7 +40,7 @@
 #define RANDOM "/dev/urandom"			/* Not genuinely random */
 /* #define RANDOM "/dev/random" */		/* Quite genuinely random */
 
-int myread(int fd, char *buf, int len)
+int myread(int fd, unsigned char *buf, int len)
 {
 	int sofar;
 	int res;

hdlcstress.c

@@ -107,13 +107,12 @@ static struct fasthdlc_state fs;
 
 void send_packet(unsigned char *buf, int len)
 {
-	int res;
 	int x;
 	unsigned char outbuf[BLOCK_SIZE];
 	int pos=0;
 	unsigned int fcs = PPP_INITFCS;
 	if (hdlcmode)
-		res = write(fd, buf, len + 2);
+		write(fd, buf, len + 2);
 	else {
 		for (x=0;x<len;x++) {
 			if (fasthdlc_tx_load(&fs, buf[x]))

hotplug/Makefile.am

@@ -0,0 +1,11 @@
+
+nobase_dist_dahditools_SCRIPTS	= \
+	dahdi_handle_device	\
+	dahdi_span_config	\
+	dahdi_auto_assign_compat	\
+	span_config.d/10-dahdi-cfg	\
+	span_config.d/20-fxotune	\
+	span_config.d/50-asterisk	\
+	handle_device.d/10-span-types	\
+	handle_device.d/20-span-assignments	\
+	#

hotplug/dahdi_auto_assign_compat

@@ -22,4 +22,9 @@ devices_by_registration_time | \
 	done
 
 # Now handle Astribanks
-LC_ALL=C dahdi_registration -Rv on
+unmatched="`dahdi_span_assignments unmatched`"
+if [ -n "$unmatched" ]; then
+	# Only if astribanks are not matched in span-assignments.conf
+	# TODO: have dahdi_registration run only on "$unmatched"
+	LC_ALL=C dahdi_registration -Rv on
+fi

hotplug/handle_device.d/30-xpp-sync

@@ -0,0 +1,18 @@
+#! /bin/sh
+
+# Run xpp_sync whenever an Astribank is connected.
+
+# May be set in /etc/dahdi/init.conf
+XPP_SYNC=${XPP_SYNC:-auto}
+
+case "$ACTION" in
+add) ;;
+*) exit 0 ;;
+esac
+
+case "${DEVPATH##*/}" in
+astribanks:*) ;;
+*) exit 0 ;;
+esac
+
+xpp_sync "$XPP_SYNC"

init.conf.sample

@@ -17,6 +17,7 @@
 #XPP_FIRMWARE_DIR=/usr/share/dahdi
 #XPP_HOTPLUG_DISABLED=yes
 #XPP_HOTPLUG_DAHDI=yes
+#ASTERISK_SUPPORTS_DAHDI_HOTPLUG=yes
 
 # Disable udev handling:
 #DAHDI_UDEV_DISABLE_DEVICES=yes

modules.sample

@@ -53,6 +53,10 @@ wcfxo
 wctdm
 
 # Digium B410P: 4 NT/TE BRI ports
+# Digium B433P: 4 NT/TE BRI ports pci-e 
+# Digium B434P: 4 NT/TE BRI ports
+# Digium B233P: 2 NT/TE BRI ports pci-e 
+# Digium B234P: 2 NT/TE BRI ports
 wcb4xxp
 
 # Digium TC400B: G729 / G723 Transcoding Engine

patgen.c

@@ -45,7 +45,6 @@
 #define BLOCK_SIZE 2041
 #define DEVICE	  "/dev/dahdi/channel"
 
-static const char	rcsid[] = "$Id$";
 char			*prog_name;
 
 static void usage(void)
@@ -53,7 +52,6 @@ static void usage(void)
 	fprintf(stderr, "Usage: %s <dahdi_chan>\n", prog_name);
 	fprintf(stderr, "   e.g.: %s /dev/dahdi/55\n", prog_name);
 	fprintf(stderr, "         %s 455\n", prog_name);
-	fprintf(stderr, "%s version %s\n", prog_name, rcsid);
 	exit(1);
 }
 

patlooptest.c

@@ -168,6 +168,7 @@ int main(int argc, char *argv[])
 	int opt;
 	int oldstyle_cmdline = 1;
 	unsigned int event_count = 0;
+	time_t start_time = 0;
 
 	/* Parse the command line arguments */
 	while((opt = getopt(argc, argv, "b:s:t:r:v?h")) != -1) {
@@ -218,8 +219,6 @@ int main(int argc, char *argv[])
 	if (oldstyle_cmdline && argc > optind +1) {
 		timeout = strtoul(argv[optind+1], NULL, 10);
 	}
-	
-	time_t start_time = 0;
 
 	fd = channel_open(device, &bs);
 	if (fd < 0)

pattest.c

@@ -44,7 +44,6 @@
 #define BLOCK_SIZE 2039
 #define DEVICE	  "/dev/dahdi/channel"
 
-static const char	rcsid[] = "$Id$";
 char			*prog_name;
 
 static void usage(void)
@@ -52,7 +51,6 @@ static void usage(void)
 	fprintf(stderr, "Usage: %s <dahdi_chan>\n", prog_name);
 	fprintf(stderr, "   e.g.: %s /dev/dahdi/55\n", prog_name);
 	fprintf(stderr, "         %s 455\n", prog_name);
-	fprintf(stderr, "%s version %s\n", prog_name, rcsid);
 	exit(1);
 }
 

ppp/Makefile

@@ -1,29 +0,0 @@
-#COPTS	= -O2 -g
-
--include ../makeopts
-
-CFLAGS		+= $(COPTS) -fPIC
-LDFLAGS		+= -shared
-
-INCLUDE_DIR	= $(includedir)/pppd
-
-LIBDIR		= $(libdir)/pppd/$(PPPD_VERSION)
-
-PLUGINS := dahdi.so
-
-all:	$(PLUGINS)
-
-%.so: %.c
-ifeq (,$(PPPD_VERSION))
-	@echo "pppd version not found (in patchlevel.h)."
-	@echo "Install ppp source/headers and/or ./configure --with-ppp=PATH."
-	exit 1
-endif
-	$(CC) -o $@ $(CFLAGS) $^ $(LDFLAGS) 
-
-install: $(PLUGINS)
-	$(INSTALL) -d $(DESTDIR)$(LIBDIR)
-	$(INSTALL) -m 0644 $? $(DESTDIR)$(LIBDIR)
-
-clean:
-	rm -f *.o *.so *.a

ppp/Makefile.am

@@ -0,0 +1,7 @@
+plugindir		= $(libdir)/pppd/$(PPPD_VERSION)
+plugin_LTLIBRARIES	= dahdi.la
+
+dahdi_la_CFLAGS		= $(DAHDI_INCLUDE)
+dahdi_la_LDFLAGS	= -module -avoid-version
+
+CLEANFILES		= dahdi.so

tonezone.c

@@ -89,7 +89,8 @@ static int build_tone(void *data, size_t size, struct tone_zone_sound *t, int *c
 	int firstnobang = -1;
 	int freq1, freq2, time;
 	int modulate = 0;
-	float db, gain;
+	float db = 1.0;
+	float gain;
 	int used = 0;
 	dup = strdup(t->data);
 	s = strtok(dup, ",");
@@ -112,16 +113,13 @@ static int build_tone(void *data, size_t size, struct tone_zone_sound *t, int *c
 		} else if (sscanf(s, "%d+%d", &freq1, &freq2) == 2) {
 			PRINT_DEBUG("f1+f2 format: %d, %d\n", freq1, freq2);
 			time = 0;
-			db = 1.0;
 		} else if (sscanf(s, "%d*%d", &freq1, &freq2) == 2) {
 			PRINT_DEBUG("f1+f2 format: %d, %d\n", freq1, freq2);
 			modulate = 1;
 			time = 0;
-			db = 1.0;
 		} else if (sscanf(s, "%d/%d", &freq1, &time) == 2) {
 			PRINT_DEBUG("f1/time format: %d, %d\n", freq1, time);
 			freq2 = 0;
-			db = 1.0;
 		} else if (sscanf(s, "%d@/%d", &freq1, &time) == 2) {
 			/* The "@" character has been added to enable an
  			 * approximately -20db tone generation of any frequency This has been done
@@ -136,7 +134,6 @@ static int build_tone(void *data, size_t size, struct tone_zone_sound *t, int *c
 			firstnobang = *count;
 			freq2 = 0;
 			time = 0;
-			db = 1.0;
 		} else {
 			fprintf(stderr, "tone component '%s' of '%s' is a syntax error\n", s,t->data);
 			return -1;

version.c.in

@@ -0,0 +1,6 @@
+/*
+ * version.c.in
+ */
+
+const char dahdi_tools_version[] = "DAHDI Tools Version - @TOOLSVERSION@";
+

xpp/50-dahdi.conf

@@ -0,0 +1,5 @@
+# A dracut.conf(5) snippet
+# Disable loading the Astribank (xpp_usb) drivers. This is because
+# it relies on files in the root filesystem:
+# See https://issues.asterisk.org/jira/browse/DAHLIN-352
+omit_drivers+=" xpp_usb "

xpp/Makefile

@@ -1,202 +0,0 @@
-PEDANTIC	= -ansi -pedantic -std=c99
-
-INSTALL		= install
-INSTALL_DATA	= install -m 644
-
-#
-# Ugly hack to find kernel directories before/after the split
-# to kernel/user-space.
-#
-# These variables should be passed to us. But until then...
-#
-DAHDI_TOOLSDIR	?= ..
-DAHDI_KERNELDIR	=
-
--include $(DAHDI_TOOLSDIR)/makeopts
-
-INSTALL_DATA	= $(INSTALL) -m 644
-
-# In 1.4 those are provided by autoconf through makeopts
-prefix		?= /usr
-datadir		?= $(prefix)/share
-mandir		?= $(datadir)/man
-sysconfdir	?= $(prefix)/etc
-udevrulesdir	?= $(sysconfdir)/udev/rules.d
-INSTALL		?= install
-
-INSTALL_DATA	= $(INSTALL) -m 644
-
-SBINDIR		= $(prefix)/sbin
-DATADIR		= $(datadir)/dahdi
-MANDIR		= $(mandir)/man8
-HOTPLUG_USB_DIR	= $(sysconfdir)/hotplug/usb
-PERLLIBDIR	:= $(shell eval `perl -V:sitelib`; echo "$$sitelib")
-PERL_DIRS	:= $(shell cd perl_modules; find * -name '[A-Z]*' -type d| xargs)
-PERL_MODS_PAT	:= *.pm $(PERL_DIRS:%=%/*.pm)
-PERL_MODS	:= $(shell cd perl_modules; echo $(PERL_MODS_PAT))
-
-# Variables that should be defined above, but need sane defaults:
-# FIXME: Are those values really sane?
-HOSTCC		?= $(CC)
-
-USE_OCTASIC	:= yes
-OCTASIC_DIR	:= oct612x
-
-ifneq (no,$(USE_OCTASIC))
-
-OCT_OBJS	= $(shell $(OCTASIC_DIR)/octasic-helper objects $(OCTASIC_DIR))
-OCT_SRCS	= $(shell echo $(OCT_OBJS) | tr -s ' ' '\n' | sed 's/\.o$$/.c/g')
-OCT_HERE_OBJS	= $(shell echo $(OCT_OBJS) | tr -s ' ' '\n' | sed 's,^.*/,,')
-OCT_CFLAGS	= $(shell $(OCTASIC_DIR)/octasic-helper cflags $(OCTASIC_DIR))
-OCT_DEFINES	= \
-	-DPTR_TYPE=uint32_t	\
-	-DcOCT6100_INTERNAL_SUPER_ARRAY_SIZE=1024	\
-	-DcOCT6100_MAX_ECHO_CHANNELS=672		\
-	-DcOCT6100_MAX_MIXER_EVENTS=1344
-
-ECHO_LOADER_SRC	= echo_loader.c parse_span_specs.c
-ECHO_LOADER	= $(ECHO_LOADER_SRC:.c=.o)
-endif
-
-%.8: %
-	pod2man --section 8 $^ > $@ || $(RM) $@
-PERL_SCRIPTS	=	\
-		dahdi_registration	\
-		xpp_sync	\
-		lsdahdi		\
-		xpp_blink	\
-		dahdi_genconf	\
-		dahdi_hardware	\
-		twinstar	\
-		#
-
-PERL_MANS	= $(PERL_SCRIPTS:%=%.8)
-
-# List all our sources
-XUSB_SRCS		= xtalk/xusb.c xtalk/xlist.c xtalk/debug.c
-XTALK_SRCS		= xtalk/xtalk.c
-MPPTALK_SRCS		= mpptalk.c
-ASTRIBANK_SRCS		= astribank_usb.c
-ABHEXLOAD_SRCS		= astribank_hexload.c hexfile.c pic_loader.c
-ABTOOL_SRCS		= astribank_tool.c
-ABALLOW_SRCS		= astribank_allow.c astribank_license.c
-
-SRCS	= \
-	$(XUSB_SRCS)	\
-	$(XTALK_SRCS)	\
-	$(MPPTALK_SRCS)	\
-	$(ASTRIBANK_SRCS)	\
-	$(ABHEXLOAD_SRCS)	\
-	$(ABTOOL_SRCS)	\
-	$(ABALLOW_SRCS)	\
-	$(ECHO_LOADER_SRC)
-
-# Derive object files from source list
-XUSB_OBJS		= $(XUSB_SRCS:.c=.o)
-XTALK_OBJS		= $(XTALK_SRCS:.c=.o) $(XUSB_OBJS)
-MPPTALK_OBJS		= $(MPPTALK_SRCS:.c=.o) $(XTALK_OBJS)
-ASTRIBANK_OBJS		= $(ASTRIBANK_SRCS:.c=.o) $(MPPTALK_OBJS)
-ABHEXLOAD_OBJS		= $(ABHEXLOAD_SRCS:.c=.o) $(ASTRIBANK_OBJS) $(ECHO_LOADER) $(OCT_HERE_OBJS)
-ABTOOL_OBJS		= $(ABTOOL_SRCS:.c=.o) $(ASTRIBANK_OBJS)
-ABALLOW_OBJS		= $(ABALLOW_SRCS:.c=.o) $(ASTRIBANK_OBJS)
-
-TARGETS	= .perlcheck astribank_is_starting
-PROG_INSTALL	= astribank_is_starting
-MAN_INSTALL	= $(PROG_INSTALL:%=%.8)
-ifeq	(1,$(PBX_USB))
-TARGETS	+= \
-	   astribank_tool	\
-	   astribank_hexload	\
-	   astribank_allow	\
-	   test_parse
-PROG_INSTALL	+= astribank_tool astribank_hexload astribank_allow
-endif
-ifneq	(,$(PERLLIBDIR))
-PROG_INSTALL	+= $(PERL_SCRIPTS)
-TARGETS		+= $(PERL_MANS)
-endif
-
-all: $(TARGETS)
-
-docs: $(PERL_MANS)
-
-install: all
-	$(INSTALL) -d $(DESTDIR)$(SBINDIR)
-	$(INSTALL) $(PROG_INSTALL) $(DESTDIR)$(SBINDIR)/
-	$(INSTALL) -d $(DESTDIR)$(DATADIR)
-	$(INSTALL) xpp_fxloader astribank_hook $(DESTDIR)$(DATADIR)/
-	$(INSTALL) waitfor_xpds $(DESTDIR)$(DATADIR)/
-	$(INSTALL) -d $(DESTDIR)$(udevrulesdir)
-	$(INSTALL_DATA) xpp.rules $(DESTDIR)$(udevrulesdir)/
-	$(INSTALL) -d $(DESTDIR)$(MANDIR)
-	$(INSTALL_DATA) $(MAN_INSTALL) $(DESTDIR)$(MANDIR)/
-	$(INSTALL) -d $(DESTDIR)$(HOTPLUG_USB_DIR)
-	$(INSTALL_DATA) xpp_fxloader.usermap $(DESTDIR)$(HOTPLUG_USB_DIR)/
-	# for backward compatibility and for hotplug users:
-	ln -sf $(DATADIR)/xpp_fxloader $(DESTDIR)$(HOTPLUG_USB_DIR)/
-ifneq	(,$(PERLLIBDIR))
-	$(INSTALL) -d $(DESTDIR)$(PERLLIBDIR)
-	for i in $(PERL_DIRS); \
-	do \
-		$(INSTALL) -d "$(DESTDIR)$(PERLLIBDIR)/$$i"; \
-	done
-	for i in $(PERL_MODS); \
-	do \
-		$(INSTALL_DATA) "perl_modules/$$i" "$(DESTDIR)$(PERLLIBDIR)/$$i"; \
-	done
-endif
-
-CFLAGS		+= -I. -Ixtalk -Wall -Werror
-
-astribank_hexload: $(ABHEXLOAD_OBJS)
-astribank_hexload: LIBS+=$(EXTRA_LIBS) $(USB_LIB)
-astribank_hexload: CFLAGS+=$(OCT_CFLAGS)
-
-astribank_tool: $(ABTOOL_OBJS)
-astribank_tool: LIBS+=$(EXTRA_LIBS) $(USB_LIB)
-
-astribank_allow: $(ABALLOW_OBJS)
-astribank_allow: LIBS+=$(EXTRA_LIBS) $(USB_LIB)
-
-astribank_is_starting: astribank_is_starting.o
-astribank_is_starting: LIBS+=$(EXTRA_LIBS)
-
-hex2iic: hex2iic.o iic.o hexfile.o
-
-test_parse: test_parse.o hexfile.o
-test_parse: LIBS+=$(EXTRA_LIBS) $(USB_LIB)
-
-ifneq (no,$(USE_OCTASIC))
-.octasic.depend: $(OCTASIC_DIR)/octasic-helper Makefile ../config.status
-	$(CC) -MM $(OCT_CFLAGS) \
-		`$(OCTASIC_DIR)/octasic-helper objects | \
-		tr -s ' ' '\n' | \
-		sed -e 's,.*,$(OCTASIC_DIR)/&,' -e 's/\.o$$/.c/'` > $@
-
--include .octasic.depend
-
-$(OCT_HERE_OBJS): Makefile
-	$(CC) -c $(CFLAGS) $(OCT_CFLAGS) $(OCT_DEFINES) $(OCT_SRCS)
-
-endif
-
-
-%: %.o
-	$(CC) $(LDFLAGS) $^ $(LIBS) -o $@
-
-.perlcheck: $(PERL_SCRIPTS)
-	for i in $^; do perl -I./perl_modules -c $$i || exit 1; done
-	touch $@
-
-clean:
-	$(RM) .depend .octasic.depend *.o xtalk/*.o $(OCT_HERE_OBJS) $(TARGETS)
-
-.PHONY: depend
-ifeq	(1,$(PBX_USB))
-depend: .depend
-.depend: *.c *.h xtalk/*.c
-	@echo "Calculating dependencies"
-	@if ! $(CC) $(CFLAGS) $(OCT_CFLAGS) -MM $(SRCS) > $@; then $(RM) $@; exit 1; fi
-
-include .depend
-endif

xpp/Makefile.am

@@ -0,0 +1,170 @@
+
+all-local: $(perl_checks)
+
+SUBDIRS		=
+
+man_MANS	=
+
+
+# FIXME: try to improve code, so we can use $(PEDANTIC)
+#PEDANTIC	= -ansi -pedantic -std=c99
+GLOBAL_CFLAGS	= -I$(srcdir) -I$(srcdir)/xtalk/include $(PEDANTIC) -Wall
+
+if DAHDI_DEVMODE
+GLOBAL_CFLAGS	+= \
+	-Werror \
+	-Wunused \
+	-Wundef \
+	-Wmissing-format-attribute \
+	-Wformat-security \
+	-Wformat=2
+endif
+
+if PERL
+SUBDIRS		+= perl_modules
+
+%.8: %
+	@if file "$^" | cut -d: -f2 | grep -q -iw perl; then \
+		if pod2man --section 8 $^ > $@; then \
+			echo "  GEN      $@"; \
+		else \
+			rm -f "$@"; \
+		fi \
+	fi
+
+%.check: %
+	@echo "  CHECK    $^"; \
+	if ! perl -I./perl_modules -c $^ 2>/dev/null; then \
+		perl -I./perl_modules -c $^; \
+	fi
+	@touch $@
+
+perl_scripts	=	\
+		dahdi_registration	\
+		xpp_sync	\
+		lsdahdi		\
+		xpp_blink	\
+		dahdi_genconf	\
+		dahdi_hardware	\
+		twinstar	\
+		#
+
+perl_checks	= $(perl_scripts:%=%.check)
+perl_mans	= $(perl_scripts:%=%.8)
+
+endif
+
+dist_dahditools_SCRIPTS	= xpp_fxloader astribank_hook waitfor_xpds
+udevrulesdir	= @udevrulesdir@
+udevrules_DATA	= xpp.rules
+
+dist_sbin_SCRIPTS	= $(perl_scripts)
+man_MANS		+= $(perl_mans)
+CLEANFILES		= $(perl_checks) $(perl_mans)
+
+dracutconfdir = @prefix@/lib/dracut/dracut.conf.d
+dracutconf_DATA = 50-dahdi.conf
+
+if	PBX_USB
+
+SUBDIRS		+= oct612x xtalk
+
+if	LIBUSBX
+USB_CFLAGS		= $(LIBUSBX_CFLAGS)
+USB_LIBS		= $(LIBUSBX_LIBS)
+USB_NAME		= libusbx
+else
+if	LIBUSB
+USB_CFLAGS		= $(LIBUSB_CFLAGS)
+USB_LIBS		= $(LIBUSB_LIBS)
+USB_NAME		= libusb
+endif
+endif
+
+noinst_LTLIBRARIES	= libastribank.la libecholoader.la libhexfile.la
+
+libastribank_la_SOURCES	= \
+		astribank.c	\
+		astribank.h	\
+		mpptalk.c	\
+		mpptalk.h	\
+		astribank_license.c	\
+		astribank_license.h	\
+		#
+
+libastribank_la_CFLAGS		= $(GLOBAL_CFLAGS)
+libastribank_la_LIBADD		= xtalk/libxtalk.la
+
+if USE_OCTASIC
+libecholoader_la_SOURCES	= \
+		parse_span_specs.c \
+		parse_span_specs.h	\
+		echo_loader.c	\
+		echo_loader.h	\
+		#
+
+libecholoader_la_CFLAGS		= $(GLOBAL_CFLAGS) $(OCTASIC_CFLAGS)
+endif
+
+libhexfile_la_SOURCES	= \
+		hexfile.c	\
+		hexfile.h	\
+		#
+
+sbin_PROGRAMS	= \
+		astribank_tool \
+		astribank_hexload \
+		astribank_allow \
+		astribank_is_starting
+
+check_PROGRAMS		= test_parse
+test_parse_LDADD	= libhexfile.la
+
+astribank_tool_SOURCES		= astribank_tool.c
+astribank_tool_CFLAGS		= $(GLOBAL_CFLAGS)
+astribank_tool_LDFLAGS		= $(USB_LIBS)
+astribank_tool_LDADD		= libastribank.la
+
+astribank_hexload_SOURCES	= \
+			astribank_hexload.c	\
+			pic_loader.c	\
+			pic_loader.h	\
+			#
+
+astribank_hexload_CFLAGS	= $(GLOBAL_CFLAGS) $(OCTASIC_CFLAGS)
+astribank_hexload_LDFLAGS	= $(USB_LIBS)
+astribank_hexload_LDADD		= \
+		libhexfile.la	\
+		libastribank.la	\
+		libecholoader.la	\
+		oct612x/liboctasic.la	\
+		#
+
+astribank_allow_CFLAGS		= $(GLOBAL_CFLAGS)
+astribank_allow_LDFLAGS		= $(USB_LIBS)
+astribank_allow_LDADD		= libastribank.la
+
+man_pages	= \
+		astribank_tool.8 \
+		astribank_hexload.8 \
+		astribank_allow.8 \
+		astribank_is_starting.8
+
+man_MANS	+= $(man_pages)
+
+endif
+
+EXTRA_DIST	= \
+	$(man_pages)	\
+	$(udevrules_DATA)	\
+	README.Astribank	\
+	astribank_upgrade	\
+	dahdi.cgi	\
+	dahdi_drivers	\
+	genconf_parameters	\
+	twinstar_hook	\
+	twinstar_setup	\
+	xpp_modprobe	\
+	xpp_timing	\
+	#
+

xpp/README.Astribank

@@ -47,9 +47,9 @@ Apart from the standard DAHDI build requirements, you also need:
 
 * *libusb development headers* to build the Astribank firmware tools
   (astribank_tool, astribank_hexload, astribank_allow).
-  This is typically the package libusb-dev on Debian (and derivatives
-  like Ubuntu) or libusb-devel on RedHat (and derivatives like
-  CentOS/Trixbox).
+  This is typically the package libusb-1.0-0-dev on Debian (and
+  derivatives such as Ubuntu) or libusbx-devel on RedHat (and derivatives
+  such as CentOS).
 * *Echo Canceller Module firmware*: If you have an Astribank with an
   echo canceller module, see the following section.
 
@@ -1257,8 +1257,8 @@ Astribanks Synchronization Source
 If there is more than one Astribank on the system, all the Astribanks
 keep their clock in sync. Optionally the Astribanks can synchronize
 their clock to the master DAHDI device (in case it is a different DAHDI
-device). Normally you just use the default init.d script or run
-explicitly:
+device). Normally it would be run automatically from the udev hooks
+run on device plug (handle_device), but you can also run it explicitly:
 
   xpp_sync auto
 
@@ -1488,6 +1488,9 @@ other side.
 current. That is: which ones are connected to an active FXS on the
 other side.
 
+===== /sys/bus/astribanks/devices/xbus-NN/NN:M:P/hwid
+Prints <module type>.<module subtype>. Both are small numbers.
+
 ===== /sys/bus/astribanks/devices/xbus-NN/NN:M:P/offhook
 Shows ports that are (1) or are not (0) off-hook. When a channel is
 not off-hook. For BRI and E1/T1 the value is 1 if the span is in use.

xpp/astribank.c

@@ -0,0 +1,177 @@
+#include <assert.h>
+#include <errno.h>
+#include <stdlib.h>
+#include <string.h>
+#include <xtalk/debug.h>
+#include <xtalk/xusb.h>
+#include "mpptalk.h"
+#include "astribank.h"
+
+#define	DBG_MASK	0x08
+
+struct astribank {
+        struct xusb_device      *xusb_device;
+	struct xusb_iface	*xpp_iface;
+	struct xusb_iface	*mpp_iface;
+        struct mpp_device       *mpp;
+	char *path;
+};
+
+
+struct astribank *astribank_new(const char *path)
+{
+	struct astribank *ab;
+
+	ab = calloc(sizeof(*ab), 1);
+	if (!ab) {
+		ERR("%s: Failed allocating Astribank device\n", path);
+		goto err;
+	}
+	ab->xusb_device = xusb_find_bypath(path);
+	if (!ab->xusb_device) {
+		ERR("%s: Cannot find Astribank\n", path);
+		goto err;
+	}
+	ab->path = strdup(path);
+	if (!ab->path) {
+		ERR("%s: Failed allocating Astribank path\n", path);
+		goto err;
+	}
+	return ab;
+err:
+	astribank_destroy(ab);
+	return NULL;
+}
+
+void astribank_destroy(struct astribank *ab)
+{
+	if (ab) {
+		if (ab->path)
+			free(ab->path);
+		if (ab->xpp_iface)
+			xusb_release(ab->xpp_iface);
+		if (ab->mpp) {
+			mpp_delete(ab->mpp); /* this also closes the underlying xusb */
+			ab->mpp = NULL;
+		}
+		if (ab->xusb_device) {
+			xusb_destroy(ab->xusb_device);
+			ab->xusb_device = NULL;
+		}
+		free(ab);
+		ab = NULL;
+	}
+}
+
+struct xusb_iface *astribank_xpp_open(struct astribank *ab)
+{
+	int ret;
+
+        ret = xusb_claim(ab->xusb_device, 0, &ab->xpp_iface);
+        if (ret < 0) {
+		ERR("%s: Cannot claim XPP interface\n", ab->path);
+		goto err;
+        }
+	DBG("%s: Claimed Astribank XPP interface\n", ab->path);
+	return ab->xpp_iface;
+err:
+	if (ab->xpp_iface)
+		xusb_release(ab->xpp_iface);
+	return NULL;
+}
+
+struct mpp_device *astribank_mpp_open(struct astribank *ab)
+{
+	int ret;
+
+	ret = xusb_claim(ab->xusb_device, 1, &ab->mpp_iface);
+	if (ret < 0) {
+		ERR("%s: Cannot claim MPP interface\n", ab->path);
+		goto err;
+	}
+	DBG("%s: Claimed Astribank MPP interface\n", ab->path);
+	ab->mpp = mpp_new(ab->mpp_iface);
+	if (!ab->mpp) {
+		ERR("Failed initializing MPP protocol\n");
+		goto err;
+	}
+	ret = mpp_status_query(ab->mpp);
+	if (ret < 0) {
+		ERR("status query failed (ret=%d)\n", ret);
+		goto err;
+	}
+	return ab->mpp;
+err:
+	if (ab->mpp) {
+		mpp_delete(ab->mpp); /* this also closes the underlying xusb */
+		ab->mpp = NULL;
+	}
+	return NULL;
+}
+
+struct xusb_device *xusb_dev_of_astribank(const struct astribank *ab)
+{
+	assert(ab->xusb_device);
+	return ab->xusb_device;
+}
+
+const char *astribank_devpath(const struct astribank *ab)
+{
+	return xusb_devpath(ab->xusb_device);
+}
+
+const char *astribank_serial(const struct astribank *ab)
+{
+	return xusb_serial(ab->xusb_device);
+}
+
+void show_astribank_info(const struct astribank *ab)
+{
+	struct xusb_device *xusb_device;
+
+	assert(ab != NULL);
+	xusb_device = ab->xusb_device;
+	assert(xusb_device != NULL);
+	if(verbose <= LOG_INFO) {
+		xusb_showinfo(xusb_device);
+	} else {
+		const struct xusb_spec  *spec;
+
+		spec = xusb_spec(xusb_device);
+		printf("USB    Bus/Device:    [%s]\n", xusb_devpath(xusb_device));
+		printf("USB    Firmware Type: [%s]\n", spec->name);
+		printf("USB    iSerialNumber: [%s]\n", xusb_serial(xusb_device));
+		printf("USB    iManufacturer: [%s]\n", xusb_manufacturer(xusb_device));
+		printf("USB    iProduct:      [%s]\n", xusb_product(xusb_device));
+	}
+}
+
+int astribank_send(struct astribank *ab, int interface_num, const char *buf, int len, int timeout)
+{
+	struct xusb_iface *iface;
+
+	if (interface_num == 0)
+		iface = ab->xpp_iface;
+	else if (interface_num == 1)
+		iface = ab->mpp_iface;
+	else {
+		ERR("Unknown interface number (%d)\n", interface_num);
+		return -EINVAL;
+	}
+	return xusb_send(iface, buf, len, timeout);
+}
+
+int astribank_recv(struct astribank *ab, int interface_num, char *buf, size_t len, int timeout)
+{
+	struct xusb_iface *iface;
+
+	if (interface_num == 0)
+		iface = ab->xpp_iface;
+	else if (interface_num == 1)
+		iface = ab->mpp_iface;
+	else {
+		ERR("Unknown interface number (%d)\n", interface_num);
+		return -EINVAL;
+	}
+	return xusb_recv(iface, buf, len, timeout);
+}

xpp/astribank.h

@@ -0,0 +1,33 @@
+#ifndef	ASTRIBANK_H
+#define	ASTRIBANK_H
+
+#include <mpptalk.h>
+
+struct astribank *astribank_new(const char *path);
+void astribank_destroy(struct astribank *ab);
+void show_astribank_info(const struct astribank *ab);
+
+struct xusb_iface *astribank_xpp_open(struct astribank *ab);
+struct mpp_device *astribank_mpp_open(struct astribank *ab);
+
+struct xusb_device *xusb_dev_of_astribank(const struct astribank *ab);
+const char *astribank_devpath(const struct astribank *ab);
+const char *astribank_serial(const struct astribank *ab);
+
+int astribank_send(struct astribank *ab, int interface_num, const char *buf, int len, int timeout);
+int astribank_recv(struct astribank *ab, int interface_num, char *buf, size_t len, int timeout);
+
+
+#define AB_REPORT(report_type, astribank, fmt, ...) \
+	report_type("%s [%s]: " fmt, \
+		astribank_devpath(astribank), \
+		astribank_serial(astribank), \
+		## __VA_ARGS__)
+
+#define AB_INFO(astribank, fmt, ...) \
+		AB_REPORT(INFO, astribank, fmt, ## __VA_ARGS__)
+
+#define AB_ERR(astribank, fmt, ...) \
+		AB_REPORT(ERR, astribank, fmt, ## __VA_ARGS__)
+
+#endif	/* ASTRIBANK_H */

xpp/astribank_allow.c

@@ -31,13 +31,11 @@
 #include <sys/types.h>
 #include <arpa/inet.h>
 #include <ctype.h>
-#include "mpp.h"
+#include <xtalk/debug.h>
 #include "mpptalk.h"
-#include <debug.h>
+#include "astribank.h"
 #include "astribank_license.h"
 
-static const char rcsid[] = "$Id$";
-
 #define	DBG_MASK	0x80
 
 static char	*progname;
@@ -55,28 +53,11 @@ static void usage()
 	exit(1);
 }
 
-static int capabilities_burn(
-		struct astribank_device *astribank,
-		struct eeprom_table *eeprom_table,
-		struct capabilities *capabilities,
-		struct capkey *key)
-{
-	int	ret;
-
-	INFO("Burning capabilities\n");
-	ret = mpp_caps_set(astribank, eeprom_table, capabilities, key);
-	if(ret < 0) {
-		ERR("Capabilities burning failed: %d\n", ret);
-		return ret;
-	}
-	INFO("Done\n");
-	return 0;
-}
-
 int main(int argc, char *argv[])
 {
 	char			*devpath = NULL;
-	struct astribank_device *astribank;
+	struct astribank *astribank;
+	struct mpp_device *mpp;
 	struct eeprom_table	eeprom_table;
 	struct capabilities	caps;
 	struct capkey		key;
@@ -127,16 +108,19 @@ int main(int argc, char *argv[])
 		usage();
 	}
 	DBG("Startup %s\n", devpath);
-	if((astribank = mpp_init(devpath, 1)) == NULL) {
-		ERR("Failed initializing MPP\n");
+	astribank = astribank_new(devpath);
+	if(!astribank) {
+		ERR("Failed initializing Astribank\n");
 		return 1;
 	}
-	if(astribank->eeprom_type != EEPROM_TYPE_LARGE) {
+	mpp = astribank_mpp_open(astribank);
+	ret = mpp_eeprom_type(mpp);
+	if(ret != EEPROM_TYPE_LARGE) {
 		ERR("Cannot use this program with astribank EEPROM type %d (need %d)\n",
-			astribank->eeprom_type, EEPROM_TYPE_LARGE);
+			ret, EEPROM_TYPE_LARGE);
 		return 1;
 	}
-	ret = mpp_caps_get(astribank, &eeprom_table, &caps, &key);
+	ret = mpp_caps_get(mpp, &eeprom_table, &caps, &key);
 	if(ret < 0) {
 		ERR("Failed to get original capabilities: %d\n", ret);
 		return 1;
@@ -158,8 +142,13 @@ int main(int argc, char *argv[])
 			return 1;
 		}
 		show_capabilities(&caps, stderr);
-		if (capabilities_burn(astribank, &eeprom_table, &caps, &key) < 0)
+		INFO("Burning capabilities\n");
+		ret = mpp_caps_set(mpp, &eeprom_table, &caps, &key);
+		if(ret < 0) {
+			ERR("Capabilities burning failed: %d\n", ret);
 			return 1;
+		}
+		INFO("Done\n");
 		if (file != stdin)
 			fclose(file);
 	} else {
@@ -180,6 +169,6 @@ int main(int argc, char *argv[])
 		if (file != stdout)
 			fclose(file);
 	}
-	mpp_exit(astribank);
+	astribank_destroy(astribank);
 	return 0;
 }

xpp/astribank_hexload.8

@@ -117,7 +117,7 @@ Examples:
 1:T1,2:T1,*:E1 \- First and second ports are T1, the rest are E1.
 .RE
 
-If the \fB\-S\fR is not given, the PRI default is determined by the existance of the \fB\-A-fR option.
+If the \fB\-S\fR is not given, the PRI default is determined by the existence of the \fB\-A-fR option.
 .RE
 
 .SH SEE ALSO

xpp/astribank_hexload.c

@@ -28,13 +28,14 @@
 #include <errno.h>
 #include <assert.h>
 #include <arpa/inet.h>
-#include <debug.h>
+#include <autoconfig.h>
+#include <xtalk/debug.h>
+#include <xtalk/xusb.h>
 #include "hexfile.h"
 #include "mpptalk.h"
+#include "astribank.h"
 #include "pic_loader.h"
 #include "echo_loader.h"
-#include "astribank_usb.h"
-#include "../autoconfig.h"
 
 #define	DBG_MASK	0x80
 #define	MAX_HEX_LINES	64000
@@ -61,7 +62,7 @@ static void usage()
 	exit(1);
 }
 
-int handle_hexline(struct astribank_device *astribank, struct hexline *hexline)
+int handle_hexline(struct mpp_device *mpp, struct hexline *hexline)
 {
 	uint16_t	len;
 	uint16_t	offset_dummy;
@@ -69,7 +70,7 @@ int handle_hexline(struct astribank_device *astribank, struct hexline *hexline)
 	int		ret;
 
 	assert(hexline);
-	assert(astribank);
+	assert(mpp);
 	if(hexline->d.content.header.tt != TT_DATA) {
 		DBG("Non data record type = %d\n", hexline->d.content.header.tt);
 		return 0;
@@ -77,14 +78,19 @@ int handle_hexline(struct astribank_device *astribank, struct hexline *hexline)
 	len = hexline->d.content.header.ll;
 	offset_dummy = hexline->d.content.header.offset;
 	data = hexline->d.content.tt_data.data;
-	if((ret = mpp_send_seg(astribank, data, offset_dummy, len)) < 0) {
+	if((ret = mpp_send_seg(mpp, data, offset_dummy, len)) < 0) {
 		ERR("Failed hexfile send line: %d\n", ret);
 		return -EINVAL;
 	}
 	return 0;
 }
 
-void print_parse_errors(int level, const char *msg, ...)
+
+#ifdef	__GNUC__
+static void print_parse_errors(int level, const char *msg, ...) __attribute__((format(printf,2,3)));
+#endif
+
+static void print_parse_errors(int level, const char *msg, ...)
 {
 	va_list ap;
 
@@ -95,7 +101,7 @@ void print_parse_errors(int level, const char *msg, ...)
 	}
 }
 
-static int load_hexfile(struct astribank_device *astribank, const char *hexfile, enum dev_dest dest)
+static int load_hexfile(struct mpp_device *mpp, const char *hexfile, enum dev_dest dest)
 {
 	struct hexdata		*hexdata = NULL;
 	int			finished = 0;
@@ -103,19 +109,24 @@ static int load_hexfile(struct astribank_device *astribank, const char *hexfile,
 	unsigned		i;
 	char			star[] = "+\\+|+/+-";
 	const char		*devstr;
+	struct xusb_device *xusb_device;
+	struct xusb_iface *xusb_iface;
+
 
 	parse_hexfile_set_reporting(print_parse_errors);
 	if((hexdata  = parse_hexfile(hexfile, MAX_HEX_LINES)) == NULL) {
 		perror(hexfile);
 		return -errno;
 	}
-	devstr = xusb_devpath(astribank->xusb);
+	xusb_iface = xubs_iface_of_mpp(mpp);
+	xusb_device = xusb_deviceof(xusb_iface);
+	devstr = xusb_devpath(xusb_device);
 	INFO("%s [%s]: Loading %s Firmware: %s (version %s)\n",
 		devstr,
-		xusb_serial(astribank->xusb),
+		xusb_serial(xusb_device),
 		dev_dest2str(dest),
 		hexdata->fname, hexdata->version_info);
-	if((ret = mpp_send_start(astribank, dest, hexdata->version_info)) < 0) {
+	if((ret = mpp_send_start(mpp, dest, hexdata->version_info)) < 0) {
 		ERR("%s: Failed hexfile send start: %d\n", devstr, ret);
 		return ret;
 	}
@@ -137,7 +148,7 @@ static int load_hexfile(struct astribank_device *astribank, const char *hexfile,
 			finished = 1;
 			continue;
 		}
-		if((ret = handle_hexline(astribank, hexline)) < 0) {
+		if((ret = handle_hexline(mpp, hexline)) < 0) {
 			ERR("%s: Failed hexfile sending in lineno %d (ret=%d)\n", devstr, i, ret);;
 			return ret;
 		}
@@ -146,7 +157,7 @@ static int load_hexfile(struct astribank_device *astribank, const char *hexfile,
 		putchar('\n');
 		fflush(stdout);
 	}
-	if((ret = mpp_send_end(astribank)) < 0) {
+	if((ret = mpp_send_end(mpp)) < 0) {
 		ERR("%s: Failed hexfile send end: %d\n", devstr, ret);
 		return ret;
 	}
@@ -173,7 +184,6 @@ int main(int argc, char *argv[])
 	int			opt_sum = 0;
 	enum dev_dest		dest = DEST_NONE;
 	const char		options[] = "vd:D:EFOopAS:";
-	int			iface_num;
 	int			ret;
 
 	progname = argv[0];
@@ -242,7 +252,6 @@ int main(int argc, char *argv[])
 			" and -p options are mutually exclusive, if neither is used then -o should present\n");
 		usage();
 	}
-	iface_num = (opt_dest) ? 1 : 0;
 	if(!opt_pic && !opt_ecver) {
 		if(optind != argc - 1) {
 			ERR("Got %d hexfile names (Need exactly one hexfile)\n",
@@ -265,29 +274,43 @@ int main(int argc, char *argv[])
 		/*
 		 * MPP Interface
 		 */
-		struct astribank_device *astribank;
+		struct astribank *astribank;
+		struct mpp_device *mpp;
 
-		if((astribank = mpp_init(devpath, iface_num)) == NULL) {
+		astribank = astribank_new(devpath);
+		if(!astribank) {
 			ERR("%s: Opening astribank failed\n", devpath);
 			return 1;
 		}
-		//show_astribank_info(astribank);
-		if(load_hexfile(astribank, argv[optind], dest) < 0) {
+		mpp = astribank_mpp_open(astribank);
+		if(!mpp) {
+			ERR("%s: Opening astribank XPP interface failed\n", devpath);
+			return 1;
+		}
+		show_astribank_info(astribank);
+		if(load_hexfile(mpp, argv[optind], dest) < 0) {
 			ERR("%s: Loading firmware to %s failed\n", devpath, dev_dest2str(dest));
 			return 1;
 		}
-		astribank_close(astribank, 0);
+		astribank_destroy(astribank);
 	} else if(opt_pic || opt_echo || opt_ecver) {
 		/*
 		 * XPP Interface
 		 */
-		struct astribank_device *astribank;
+		struct astribank *astribank;
+		struct xusb_iface *xpp_iface;
 
-		if((astribank = astribank_open(devpath, iface_num)) == NULL) {
+		astribank = astribank_new(devpath);
+		if (!astribank) {
 			ERR("%s: Opening astribank failed\n", devpath);
 			return 1;
 		}
-		//show_astribank_info(astribank);
+		xpp_iface = astribank_xpp_open(astribank);
+		if(!xpp_iface) {
+			ERR("%s: Opening astribank XPP interface failed\n", devpath);
+			return 1;
+		}
+		show_astribank_info(astribank);
 #if HAVE_OCTASIC
 		if (opt_ecver) {
 			if((ret = echo_ver(astribank)) < 0) {
@@ -310,7 +333,7 @@ int main(int argc, char *argv[])
 			}
 #endif
 		}
-		astribank_close(astribank, 0);
+		astribank_destroy(astribank);
 	}
 	return 0;
 }

xpp/astribank_hook

@@ -16,6 +16,8 @@ PATH="$dir:/usr/sbin:/sbin:/usr/bin:/bin"
 
 set -e
 
+LOCK="/var/lock/twinstar_startup"
+
 [ -r /etc/dahdi/init.conf ] && . /etc/dahdi/init.conf
 
 # For lab testing
@@ -32,17 +34,38 @@ if [ "$XPP_HOTPLUG_DAHDI" != yes ]; then
 fi
 
 export XPPORDER_CONF="$dahdi_conf/xpp_order"
-if [ ! -r "$XPPORDER_CONF" ]; then
-	(
-		echo "Skip($ACTION): No '$XPPORDER_CONF'"
-		echo "Removing uneeded startup semaphore"
-		astribank_is_starting -v -r 2>&1
-	) 2>&1 | $LOGGER
-	exit 0
-fi
 export DAHDI_CFG_CMD="dahdi_cfg -c $dahdi_conf/system.conf"
 export CALLED_FROM_ATRIBANK_HOOK=yes
 
+can_full_async() {
+	# Can we work aynchronously:
+	#    - Need modern Asterisk that accept hotplug DAHDI devices.
+	#    - Need DAHDI with "auto_assign_spans" == 0
+	if [ "$ASTERISK_SUPPORTS_DAHDI_HOTPLUG" = yes ]; then
+		aas_param='/sys/module/dahdi/parameters/auto_assign_spans'
+		aas=`cat "$aas_param" 2>/dev/null`
+		if [ "$aas" = 0 ]; then
+			return 0
+		else
+			$LOGGER "No async operation ($aas_param != 0)"
+		fi
+	else
+		$LOGGER "No async operation (ASTERISK_SUPPORTS_DAHDI_HOTPLUG!=yes)"
+	fi
+	return 1
+}
+
+check_xpporder_conf() {
+	if [ ! -r "$XPPORDER_CONF" ]; then
+		(
+			echo "Skip($ACTION): No '$XPPORDER_CONF'"
+			echo "Removing uneeded startup semaphore"
+			astribank_is_starting -v -r 2>&1
+		) 2>&1 | $LOGGER
+		exit 0
+	fi
+}
+
 clean_lines() {
 	sed -e 's/#.*//' -e 'y/\t/ /' -e 's/^ *//' -e 's/ *$//' -e '$s/$/\n/' "$XPPORDER_CONF"
 }
@@ -64,10 +87,6 @@ matched_devices() {
 	done
 }
 
-NUM_WANTED=`clean_lines | sed '/^$/d' | wc -l`
-NUM_GOOD=`matched_devices | wc -l`
-LOCK="/var/lock/twinstar_startup"
-
 # Wait until udev finished processing our requests
 # so we know the device files were actually created
 # before trying dahdi_cfg et-al.
@@ -75,22 +94,27 @@ wait_for_udev() {
 	UDEV_SETTLE_MAX_TIME=10
 
 	echo "Waiting for udev to settle down..."
-	if [ -x /sbin/udevsettle ]; then
-		# Old system, stand-alone udevsettle command
-		time /sbin/udevsettle --timeout="$UDEV_SETTLE_MAX_TIME"
+	udevsettle_cmd=
+	if [ -x /bin/udevadm ]; then
+		udevsettle_cmd="/bin/udevadm settle"
 	elif [ -x /sbin/udevadm ]; then
-		# Assume modern system, udevadm has settle parameter
-		if ! time /sbin/udevadm settle --timeout="$UDEV_SETTLE_MAX_TIME"
-		then
-			echo "udevadm failed ($?)."
-			echo "Fallback to sleep $UDEV_SETTLE_MAX_TIME seconds."
-			sleep "$UDEV_SETTLE_MAX_TIME"
-		fi
+		udevsettle_cmd="/sbin/udevadm settle"
+	elif [ -x /sbin/udevsettle ]; then
+		udevsettle_cmd="/sbin/udevsettle"
 	else
 		echo "No udevsettle/udevadm."
 		echo "Fallback to sleep $UDEV_SETTLE_MAX_TIME seconds."
 		sleep "$UDEV_SETTLE_MAX_TIME"
+		return
 	fi
+
+	if ! $udevsettle_cmd --timeout="$UDEV_SETTLE_MAX_TIME"
+	then
+		echo "udevadm failed ($?)."
+		echo "Fallback to sleep $UDEV_SETTLE_MAX_TIME seconds."
+		sleep "$UDEV_SETTLE_MAX_TIME"
+	fi
+
 	sleep 1	# Wait a bit more (races)
 }
 
@@ -110,13 +134,9 @@ start_dahdi() {
 	rm -f "$LOCK"
 }
 
-#echo "$0: $ACTION($XBUS_NAME)" | $LOGGER
-case "$ACTION" in
-add)
-	;;
-remove)
-	;;
-online)
+old_synchronous_start() {
+	NUM_GOOD=`matched_devices | wc -l`
+	NUM_WANTED=`clean_lines | sed '/^$/d' | wc -l`
 	echo "$ACTION($XBUS_NAME): $NUM_GOOD/$NUM_WANTED from $XPPORDER_CONF" | $LOGGER
 	if [ "$NUM_GOOD" -eq "$NUM_WANTED" ]; then
 		(
@@ -142,8 +162,11 @@ online)
 			fi
 		) < /dev/null 2>&1 | $LOGGER &
 	fi
-	;;
-offline)
+}
+
+old_synchronous_stop() {
+	NUM_GOOD=`matched_devices | wc -l`
+	NUM_WANTED=`clean_lines | sed '/^$/d' | wc -l`
 	echo "$ACTION($XBUS_NAME): $NUM_GOOD/$NUM_WANTED from $XPPORDER_CONF" | $LOGGER
 	if [ "$NUM_GOOD" -eq 0 ]; then
 		echo "All Astribanks offline" | $LOGGER
@@ -152,6 +175,59 @@ offline)
 		fi
 		rm -f "$LOCK"
 	fi
+}
+
+ab_list() {
+	find /sys/devices -name idVendor 2>/dev/null | \
+		xargs grep -H  'e4e4' 2>/dev/null | \
+		sed -e 's/idVendor.*/idProduct/' | xargs grep -H '11[3456]' | \
+		sed 's,/[^/]*$,,' || :
+}
+
+tws_watchdog_enable() {
+	devdir="/sys$DEVPATH"
+	label=`cat "$devdir/label"`
+	connector=`cat "$devdir/connector"`
+	xbus=`echo "$devdir" | sed 's,.*/,,'`
+	prefix="${xbus}: [${label}] @${connector}"
+	TWS_NOAUTOJUMPFILE="$TWS_DIR/twinstar_no_autojump"
+	if [ -e "$TWS_NOAUTOJUMPFILE" ]; then
+		$LOGGER "$prefix: ignore wd (found $TWS_NOAUTOJUMPFILE)"
+	else
+		# Re-arm Astribank watchdog
+		transportdir="$devdir/transport"
+		busnum=`cat "$transportdir/busnum" 2>/dev/null || :`
+		devnum=`cat "$transportdir/devnum" 2>/dev/null || :`
+		devaddr=`printf "%03d/%03d" "$busnum" "$devnum"`
+		$LOGGER "$prefix: enabling twinstar watchdog"
+		astribank_tool -D "$devaddr" -w 1 2>&1 | $LOGGER
+	fi
+}
+
+#echo "$0: $ACTION($XBUS_NAME)" | $LOGGER
+case "$ACTION" in
+add)
+	;;
+remove)
+	ab=`ab_list | wc -l`
+	if [ "$ab" -eq 0 ]; then
+		$LOGGER "$prefix: No more Astribanks -- remove astribank_is_starting semaphore"
+		astribank_is_starting -v -r 2>&1 | $LOGGER
+	fi
+	;;
+online)
+	if can_full_async; then
+		tws_watchdog_enable
+	else
+		old_synchronous_start
+	fi
+	;;
+offline)
+	if can_full_async; then
+		:	# Nothing to do
+	else
+		old_synchronous_stop
+	fi
 	;;
 *)
 	echo "$0: Unknown ACTION='$ACTION'" | $LOGGER

xpp/astribank_is_starting.8

@@ -83,7 +83,7 @@ Q: Why do you use a semaphore?
 A: because, unlike the filesystem, it is writable at any given time.
 
 .SH BUGS
-Option ordering matter. The \fB\-v\fR and \fB\-d\fR options should preceed
+Option ordering matter. The \fB\-v\fR and \fB\-d\fR options should precede
 the actions (\fB\-a\fR, \fB\-r\fR and \fB\-w\fR).
 The \fB\-t\fItimeout\fR option should preceed the \fB\-w\fR option.
 

xpp/astribank_is_starting.c

@@ -125,6 +125,8 @@ static int absem_detected(void)
 	if((absem = absem_get(0)) < 0) {
 		if(debug)
 			fprintf(stderr, "%s: absem does not exist\n", progname);
+		if(verbose)
+			printf("No Astribanks are initializing\n");
 		return absem;
 	}
 	if(debug)

xpp/astribank_license.c

@@ -24,7 +24,7 @@
 #include <stdio.h>
 #include <ctype.h>
 #include <string.h>
-#include <debug.h>
+#include <xtalk/debug.h>
 #include "astribank_license.h"
 
 #define	ARRAY_SIZE(a)	(sizeof(a)/sizeof((a)[0]))

xpp/astribank_license.h

@@ -1,7 +1,7 @@
 #ifndef	ASTRIBANK_ALLOW_H
 #define	ASTRIBANK_ALLOW_H
 
-#include "mpp.h"
+#include "mpptalk.h"
 
 enum license_markers {
 	LICENSE_MARKER_NONE = 0,

xpp/astribank_tool.c

@@ -28,10 +28,10 @@
 #include <getopt.h>
 #include <sys/types.h>
 #include <arpa/inet.h>
-#include "astribank_usb.h"
+#include <xtalk/debug.h>
+#include <xtalk/xusb.h>
 #include "mpptalk.h"
-#include <debug.h>
-#include <xusb.h>
+#include "astribank.h"
 
 #define	DBG_MASK	0x80
 /* if enabled, adds support for resetting pre-MPP USB firmware - if we 
@@ -72,94 +72,15 @@ static int reset_kind(const char *arg)
 		if(strcasecmp(reset_kinds[i].name, arg) == 0)
 			return reset_kinds[i].type_code;
 	}
-	ERR("Uknown reset kind '%s'\n", arg);
+	ERR("Unknown reset kind '%s'\n", arg);
 	return -1;
 }
 
-
-static int show_hardware(struct astribank_device *astribank)
-{
-	int	ret;
-	struct eeprom_table	eeprom_table;
-	struct capabilities	capabilities;
-	struct extrainfo	extrainfo;
-
-	ret = mpp_caps_get(astribank, &eeprom_table, &capabilities, NULL);
-	if(ret < 0)
-		return ret;
-	show_eeprom(&eeprom_table, stdout);
-	show_astribank_status(astribank, stdout);
-	if(astribank->eeprom_type == EEPROM_TYPE_LARGE) {
-		show_capabilities(&capabilities, stdout);
-		if(STATUS_FPGA_LOADED(astribank->status)) {
-			uint8_t	unit;
-			uint8_t	card_status;
-			uint8_t	card_type;
-			uint8_t	fpga_configuration;
-			uint8_t	status;
-
-			for(unit = 0; unit < 5; unit++) {
-				ret = mpps_card_info(astribank, unit, &card_type, &card_status);
-				if(ret < 0)
-					return ret;
-				printf("CARD %d: type=%x.%x %s\n", unit,
-						((card_type >> 4) & 0xF), (card_type & 0xF),
-						((card_status & 0x1) ? "PIC" : "NOPIC"));
-			}
-			ret = mpps_stat(astribank, unit, &fpga_configuration, &status);
-			if (ret < 0)
-				return ret;
-			printf("FPGA: %-17s: %d\n", "Configuration num", fpga_configuration);
-			printf("FPGA: %-17s: %s\n", "Watchdog Timer",
-				(SER_STAT_WATCHDOG_READY(status)) ? "ready" : "expired");
-			printf("FPGA: %-17s: %s\n", "XPD Alive",
-				(SER_STAT_XPD_ALIVE(status)) ? "yes" : "no");
-		}
-		ret = mpp_extrainfo_get(astribank, &extrainfo);
-		if(ret < 0)
-			return ret;
-		show_extrainfo(&extrainfo, stdout);
-		if(CAP_EXTRA_TWINSTAR(&capabilities)) {
-			twinstar_show(astribank, stdout);
-		}
-	}
-	return 0;
-}
-
-#ifdef SUPPORT_OLD_RESET
-/* Try to reset a device using USB_FW.hex, up to Xorcom rev. 6885 */
-int old_reset(const char* devpath)
-{
-	struct astribank_device *astribank;
-	int ret;
-	struct {
-		uint8_t		op;
-	} PACKED header = {0x20}; /* PT_RESET */
-	char *buf = (char*) &header;
-
-	/* Note that the function re-opens the connection to the Astribank
-	 * as any reference to the previous connection was lost when mpp_open
-	 * returned NULL as the astribank reference. */
-	astribank = astribank_open(devpath, 1);
-	if (!astribank) {
-		DBG("Failed re-opening astribank device for old_reset\n");
-		return -ENODEV;
-	}
-	ret = xusb_send(astribank->xusb, buf, 1, 5000);
-
-	/* If we just had a reenumeration, we may get -ENODEV */
-	if(ret < 0 && ret != -ENODEV)
-			return ret;
-	/* We don't astribank_close(), as it has likely been
-	 * reenumerated by now. */
-	return 0;
-}	
-#endif /* SUPPORT_OLD_RESET */
-
 int main(int argc, char *argv[])
 {
 	char			*devpath = NULL;
-	struct astribank_device *astribank;
+	struct astribank *astribank;
+	struct mpp_device *mpp;
 	const char		options[] = "vd:D:nr:p:w:Q";
 	int			opt_renumerate = 0;
 	char			*opt_port = NULL;
@@ -218,20 +139,12 @@ int main(int argc, char *argv[])
 		usage();
 	}
 	DBG("Startup %s\n", devpath);
-	if((astribank = mpp_init(devpath, 1)) == NULL) {
-		ERR("Failed initializing MPP\n");
-#ifdef SUPPORT_OLD_RESET
-		DBG("opt_reset = %s\n", opt_reset);
-		if (opt_reset) {
-			DBG("Trying old reset method\n");
-			if ((ret = old_reset(devpath)) != 0) {
-				ERR("Old reset method failed as well: %d\n", ret);
-			}
-		}
-#endif /* SUPPORT_OLD_RESET */
-
+	astribank = astribank_new(devpath);
+	if(!astribank) {
+		ERR("Failed initializing Astribank\n");
 		return 1;
 	}
+	mpp = astribank_mpp_open(astribank);
 	/*
 	 * First process reset options. We want to be able
 	 * to reset minimal USB firmwares even if they don't
@@ -244,19 +157,19 @@ int main(int argc, char *argv[])
 			ERR("Bad reset kind '%s'\n", opt_reset);
 			return 1;
 		}
-		DBG("Reseting (%s)\n", opt_reset);
-		if((ret = mpp_reset(astribank, full_reset)) < 0) {
-			ERR("%s Reseting astribank failed: %d\n",
+		DBG("Resetting (%s)\n", opt_reset);
+		if((ret = mpp_reset(mpp, full_reset)) < 0) {
+			ERR("%s Resetting astribank failed: %d\n",
 				(full_reset) ? "Full" : "Half", ret);
 		}
 		goto out;
 	}
 	show_astribank_info(astribank);
 	if(opt_query) {
-		show_hardware(astribank);
+		show_hardware(mpp);
 	} else if(opt_renumerate) {
 		DBG("Renumerate\n");
-		if((ret = mpp_renumerate(astribank)) < 0) {
+		if((ret = mpp_renumerate(mpp)) < 0) {
 			ERR("Renumerating astribank failed: %d\n", ret);
 		}
 	} else if(opt_watchdog) {
@@ -264,24 +177,24 @@ int main(int argc, char *argv[])
 
 		DBG("TWINSTAR: Setting watchdog %s-guard\n",
 			(watchdogstate) ? "on" : "off");
-		if((ret = mpp_tws_setwatchdog(astribank, watchdogstate)) < 0) {
+		if((ret = mpp_tws_setwatchdog(mpp, watchdogstate)) < 0) {
 			ERR("Failed to set watchdog to %d\n", watchdogstate);
 			return 1;
 		}
 	} else if(opt_port) {
 		int	new_portnum = strtoul(opt_port, NULL, 0);
-		int	tws_portnum = mpp_tws_portnum(astribank);
+		int	tws_portnum = mpp_tws_portnum(mpp);
 		char	*msg = (new_portnum == tws_portnum)
 					? " Same same, never mind..."
 					: "";
 
 		DBG("TWINSTAR: Setting portnum to %d.%s\n", new_portnum, msg);
-		if((ret = mpp_tws_setportnum(astribank, new_portnum)) < 0) {
+		if((ret = mpp_tws_setportnum(mpp, new_portnum)) < 0) {
 			ERR("Failed to set USB portnum to %d\n", new_portnum);
 			return 1;
 		}
 	}
 out:
-	mpp_exit(astribank);
+	astribank_destroy(astribank);
 	return 0;
 }

xpp/astribank_usb.c

@@ -1,276 +0,0 @@
-/*
- * Written by Oron Peled <oron@actcom.co.il>
- * Copyright (C) 2008, Xorcom
- *
- * All rights reserved.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
- *
- */
-
-#define	_GNU_SOURCE	/* for memrchr() */
-#include <unistd.h>
-#include <stdlib.h>
-#include <stdio.h>
-#include <string.h>
-#include <assert.h>
-#include <errno.h>
-#include <stdarg.h>
-#include <syslog.h>
-#include <arpa/inet.h>
-#include <xusb.h>
-#include "astribank_usb.h"
-#include <debug.h>
-
-static const char rcsid[] = "$Id$";
-
-#define	DBG_MASK	0x01
-#define	TIMEOUT	500
-
-#define	TYPE_ENTRY(t,p,ni,n,ne,out,in,...)	\
-		{				\
-		.my_vendor_id = 0xe4e4,		\
-		.my_product_id = (p),		\
-		.name = #t,			\
-		.num_interfaces = (ni),		\
-		.my_interface_num = (n),	\
-		.num_endpoints = (ne),		\
-		.my_ep_in = (in),		\
-		.my_ep_out = (out),		\
-		}
-
-#define	ARRAY_SIZE(x)	(sizeof(x)/sizeof(x[0]))
-
-static const struct xusb_spec	astribank_specs[] = {
-	/* OLD Firmwares */
-	TYPE_ENTRY("USB-OLDFXS",	0x1131, 2, 1, 2, MP_EP_OUT, MP_EP_IN),
-	TYPE_ENTRY("FPGA-OLDFXS",	0x1132, 2, 1, 2, MP_EP_OUT, MP_EP_IN),
-	TYPE_ENTRY("USB-BRI",		0x1141, 2, 1, 2, MP_EP_OUT, MP_EP_IN),
-	TYPE_ENTRY("FPGA-BRI",		0x1142, 2, 1, 2, MP_EP_OUT, MP_EP_IN),
-	TYPE_ENTRY("USB-OLD",		0x1151, 2, 1, 2, MP_EP_OUT, MP_EP_IN),
-	TYPE_ENTRY("FPGA-OLD",		0x1152, 2, 1, 2, MP_EP_OUT, MP_EP_IN),
-
-	TYPE_ENTRY("USB-MULTI",		0x1161, 2, 1, 2, MP_EP_OUT, MP_EP_IN),
-	TYPE_ENTRY("FPGA-MULTI",	0x1162, 2, 1, 2, MP_EP_OUT, MP_EP_IN),
-	TYPE_ENTRY("BURNED-MULTI",	0x1164, 2, 1, 2, MP_EP_OUT, MP_EP_IN),
-	TYPE_ENTRY("USB-BURN",		0x1112, 2, 1, 2, MP_EP_OUT, MP_EP_IN),
-};
-
-static const struct xusb_spec	astribank_pic_specs[] = {
-	TYPE_ENTRY("USB_PIC",		0x1161, 2, 0, 2, XPP_EP_OUT, XPP_EP_IN),
-};
-#undef TYPE_ENTRY
-
-//static int	verbose = LOG_DEBUG;
-
-/*
- * USB handling
- */
-struct astribank_device *astribank_open(const char devpath[], int iface_num)
-{
-	struct astribank_device	*astribank = NULL;
-	struct xusb		*xusb;
-
-	DBG("devpath='%s' iface_num=%d\n", devpath, iface_num);
-	if((astribank = malloc(sizeof(struct astribank_device))) == NULL) {
-		ERR("Out of memory\n");
-		goto fail;
-	}
-	memset(astribank, 0, sizeof(*astribank));
-	if (iface_num) {
-		xusb  = xusb_find_bypath(astribank_specs, ARRAY_SIZE(astribank_specs), devpath);
-	} else {
-		xusb  = xusb_find_bypath(astribank_pic_specs, ARRAY_SIZE(astribank_pic_specs), devpath);
-	}
-	if (!xusb) {
-		ERR("%s: No device found\n", __func__);
-		goto fail;
-	}
-	astribank->xusb = xusb;
-	astribank->is_usb2 = (xusb_packet_size(xusb) == 512);
-	astribank->my_interface_num = iface_num;
-	if (xusb_claim_interface(astribank->xusb) < 0) {
-		ERR("xusb_claim_interface failed\n");
-		goto fail;
-	}
-	astribank->tx_sequenceno = 1;
-	return astribank;
-fail:
-	if (astribank) {
-		free(astribank);
-		astribank = NULL;
-	}
-	return NULL;
-}
-
-/*
- * MP device handling
- */
-void show_astribank_info(const struct astribank_device *astribank)
-{
-	struct xusb			*xusb;
-
-	assert(astribank != NULL);
-	xusb = astribank->xusb;
-	assert(xusb != NULL);
-	if(verbose <= LOG_INFO) {
-		xusb_showinfo(xusb);
-	} else {
-		const struct xusb_spec	*spec;
-
-		spec = xusb_spec(xusb);
-		printf("USB    Bus/Device:    [%s]\n", xusb_devpath(xusb));
-		printf("USB    Firmware Type: [%s]\n", spec->name);
-		printf("USB    iSerialNumber: [%s]\n", xusb_serial(xusb));
-		printf("USB    iManufacturer: [%s]\n", xusb_manufacturer(xusb));
-		printf("USB    iProduct:      [%s]\n", xusb_product(xusb));
-	}
-}
-
-void astribank_close(struct astribank_device *astribank, int disconnected)
-{
-	assert(astribank != NULL);
-	if (astribank->xusb) {
-		xusb_close(astribank->xusb);
-		astribank->xusb = NULL;
-	}
-	astribank->tx_sequenceno = 0;
-}
-
-#if 0
-int flush_read(struct astribank_device *astribank)
-{
-	char		tmpbuf[BUFSIZ];
-	int		ret;
-
-	DBG("starting...\n");
-	memset(tmpbuf, 0, BUFSIZ);
-	ret = recv_usb(astribank, tmpbuf, BUFSIZ, 1);
-	if(ret < 0 && ret != -ETIMEDOUT) {
-		ERR("ret=%d\n", ret);
-		return ret;
-	} else if(ret > 0) {
-		DBG("Got %d bytes:\n", ret);
-		dump_packet(LOG_DEBUG, DBG_MASK, __FUNCTION__, tmpbuf, ret);
-	}
-	return 0;
-}
-#endif
-
-
-int release_isvalid(uint16_t release)
-{
-	uint8_t	rmajor = (release >> 8) & 0xFF;
-	uint8_t	rminor = release & 0xFF;
-
-	return	(rmajor > 0) &&
-		(rmajor < 10) &&
-		(rminor > 0) &&
-		(rminor < 10);
-}
-
-int label_isvalid(const char *label)
-{
-	int		len;
-	int		goodlen;
-	const char	GOOD_CHARS[] =
-				"abcdefghijklmnopqrstuvwxyz"
-				"ABCDEFGHIJKLMNOPQRSTUVWXYZ"
-				"0123456789"
-				"-_.";
-
-	len = strlen(label);
-	goodlen = strspn(label, GOOD_CHARS);
-	if(len > LABEL_SIZE) {
-		ERR("Label too long (%d > %d)\n", len, LABEL_SIZE);
-		return 0;
-	}
-	if(goodlen != len) {
-		ERR("Bad character in label (pos=%d)\n", goodlen);
-		return 0;
-	}
-	return 1;
-}
-
-int eeprom_fill(struct eeprom_table *eprm,
-	const char *vendor,
-	const char *product,
-	const char *release,
-	const char *label)
-{
-	uint16_t	val;
-
-	eprm->source = 0xC0;
-	eprm->config_byte = 0;
-	if(vendor) {
-		val = strtoul(vendor, NULL, 0);
-		if(!val) {
-			ERR("Invalid vendor '%s'\n",
-				vendor);
-			return -EINVAL;
-		}
-		eprm->vendor = val;
-	}
-	if(product) {
-		val = strtoul(product, NULL, 0);
-		if(!val) {
-			ERR("Invalid product '%s'\n",
-				product);
-			return -EINVAL;
-		}
-		eprm->product = val;
-	}
-	if(release) {
-		int		release_major = 0;
-		int		release_minor = 0;
-		uint16_t	value;
-
-		if(sscanf(release, "%d.%d", &release_major, &release_minor) != 2) {
-			ERR("Failed to parse release number '%s'\n", release);
-			return -EINVAL;
-		}
-		value = (release_major << 8) | release_minor;
-		DBG("Parsed release(%d): major=%d, minor=%d\n",
-			value, release_major, release_minor);
-		if(!release_isvalid(value)) {
-			ERR("Invalid release number 0x%X\n", value);
-			return -EINVAL;
-		}
-		eprm->release = value;
-	}
-	if(label) {
-		/* padding */
-		if(!label_isvalid(label)) {
-			ERR("Invalid label '%s'\n", label);
-			return -EINVAL;
-		}
-		memset(eprm->label, 0, LABEL_SIZE);
-		memcpy(eprm->label, label, strlen(label));
-	}
-	return 0;
-}
-
-int astribank_has_twinstar(struct astribank_device *astribank)
-{
-	uint16_t			product_series;
-
-	assert(astribank != NULL);
-	product_series = xusb_product_id(astribank->xusb);
-	product_series &= 0xFFF0;
-	if(product_series == 0x1160)	/* New boards */
-		return 1;
-	return 0;
-}
-

xpp/astribank_usb.h

@@ -1,113 +0,0 @@
-#ifndef	ASTRIBANK_USB_H
-#define	ASTRIBANK_USB_H
-/*
- * Written by Oron Peled <oron@actcom.co.il>
- * Copyright (C) 2008, Xorcom
- *
- * All rights reserved.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
- *
- */
-
-#include <stdio.h>
-#include <xusb.h>
-#include <xtalk.h>
-#include "mpp.h"
-
-/*
- * Astribank handling
- */
-
-#define	PACKET_SIZE	512
-
-/* USB Endpoints */
-#define	MP_EP_OUT	0x04	/* Managment processor */
-#define	MP_EP_IN	0x88	/* Managment processor */
-
-#define	XPP_EP_OUT	0x02	/* XPP */
-#define	XPP_EP_IN	0x86	/* XPP */
-
-/* USB firmware types */
-#define	USB_11xx	0
-#define	USB_FIRMWARE_II	1
-#define	USB_PIC		2
-
-struct interface_type {
-	int	type_code;
-	int	num_interfaces;
-	int	my_interface_num;
-	int	num_endpoints;
-	int	my_ep_out;
-	int	my_ep_in;
-	char	*name;
-	int	endpoints[4];	/* for matching */
-};
-
-enum eeprom_burn_state {
-	BURN_STATE_NONE		= 0,
-	BURN_STATE_STARTED	= 1,
-	BURN_STATE_ENDED	= 2,
-	BURN_STATE_FAILED	= 3,
-};
-
-struct astribank_device {
-	struct xusb		*xusb;
-	struct xtalk_device	*xtalk_dev;
-	usb_dev_handle		*handle;
-	int			my_interface_num;
-	int			my_ep_out;
-	int			my_ep_in;
-	char			iInterface[BUFSIZ];
-	int			is_usb2;
-	enum eeprom_type	eeprom_type;
-	enum eeprom_burn_state	burn_state;
-	uint8_t			status;
-	uint8_t			mpp_proto_version;
-	struct eeprom_table	*eeprom;
-	struct firmware_versions	fw_versions;
-	uint16_t		tx_sequenceno;
-};
-
-/*
- * Prototypes
- */
-struct astribank_device	*astribank_open(const char devpath[], int iface_num);
-void astribank_close(struct astribank_device *astribank, int disconnected);
-void show_astribank_info(const struct astribank_device *astribank);
-int send_usb(struct astribank_device *astribank, char *buf, int len, int timeout);
-int recv_usb(struct astribank_device *astribank, char *buf, size_t len, int timeout);
-int flush_read(struct astribank_device *astribank);
-int eeprom_fill(struct eeprom_table *eprm,
-		const char *vendor,
-		const char *product,
-		const char *release,
-		const char *label);
-int astribank_has_twinstar(struct astribank_device *astribank);
-int label_isvalid(const char *label);
-
-#define	AB_REPORT(report_type, astribank, fmt, ...) \
-	report_type("%s [%s]: " fmt, \
-		xusb_devpath((astribank)->xusb), \
-		xusb_serial((astribank)->xusb), \
-		## __VA_ARGS__)
-
-#define	AB_INFO(astribank, fmt, ...) \
-		AB_REPORT(INFO, astribank, fmt, ## __VA_ARGS__)
-
-#define	AB_ERR(astribank, fmt, ...) \
-		AB_REPORT(ERR, astribank, fmt, ## __VA_ARGS__)
-
-#endif	/* ASTRIBANK_USB_H */

xpp/dahdi_registration

@@ -109,9 +109,15 @@ foreach my $xbus (Dahdi::Xpp::xbuses($sorter)) {
 			system @cmd;
 			warn "Failed '@cmd' (status=$?)\n" if $?;
 		}
+	}
+}
+if (defined($on) && $on) {
+	if ($opts{'R'} || ! $default_auto_assign) {
 		# wait for UDEV to do its stuff
 		system "dahdi_waitfor_span_assignments assigned";
 	}
+}
+foreach my $xbus (Dahdi::Xpp::xbuses($sorter)) {
 	foreach my $xpd (Dahdi::Xpp::Xpd::telephony_devs($xbus->xpds())) {
 		my $spanno = $xpd->xpd_getattr('span');
 		myprintf "\t%-10s: ", $xpd->fqn;

xpp/echo_loader.c

@@ -28,12 +28,21 @@
 #include <limits.h>
 #include <regex.h>
 #include <sys/time.h>
-#include "echo_loader.h"
-#include "debug.h"
+#include <unistd.h>
 #include <oct6100api/oct6100_api.h>
+#include <xtalk/debug.h>
+#include <xtalk/xusb.h>
+#include <astribank.h>
+#include "echo_loader.h"
 #include "parse_span_specs.h"
 
-#define DBG_MASK        	0x03
+#ifdef	__GNUC__
+#define	PACKED	__attribute__((packed))
+#else
+#define	PACKED
+#endif
+
+#define DBG_MASK        	0x10
 #define	TIMEOUT			1000
 #define ECHO_MAX_CHANS		128
 #define ECHO_RIN_STREAM		0
@@ -53,7 +62,7 @@ static float oct_fw_load_timeout = 2.0;
 struct echo_mod {
 	tPOCT6100_INSTANCE_API pApiInstance;
 	UINT32 ulEchoChanHndl[256];
-	struct astribank_device *astribank;
+	struct astribank *astribank;
 	int maxchans;
 };
 
@@ -100,9 +109,9 @@ static struct usb_buffer {
 } usb_buffer;
 
 
-static void usb_buffer_init(struct astribank_device *astribank, struct usb_buffer *ub)
+static void usb_buffer_init(struct astribank *astribank, struct usb_buffer *ub)
 {
-	ub->max_len = xusb_packet_size(astribank->xusb);
+	ub->max_len = xusb_packet_size(xusb_dev_of_astribank(astribank));
 	ub->curr = 0;
 	ub->min_send = INT_MAX;
 	ub->max_send = 0;
@@ -120,7 +129,7 @@ static long usb_buffer_usec(struct usb_buffer *ub)
 		(now.tv_usec - ub->start.tv_usec);
 }
 
-static void usb_buffer_showstatistics(struct astribank_device *astribank, struct usb_buffer *ub)
+static void usb_buffer_showstatistics(struct astribank *astribank, struct usb_buffer *ub)
 {
 	long	usec;
 
@@ -133,7 +142,7 @@ static void usb_buffer_showstatistics(struct astribank_device *astribank, struct
 		usec / 1000, usec / ub->num_sends);
 }
 
-static int usb_buffer_flush(struct astribank_device *astribank, struct usb_buffer *ub)
+static int usb_buffer_flush(struct astribank *astribank, struct usb_buffer *ub)
 {
 	int	ret;
 	long	t;
@@ -142,7 +151,7 @@ static int usb_buffer_flush(struct astribank_device *astribank, struct usb_buffe
 
 	if (ub->curr == 0)
 		return 0;
-	ret = xusb_send(astribank->xusb, ub->data, ub->curr, TIMEOUT);
+	ret = astribank_send(astribank, 0, ub->data, ub->curr, TIMEOUT);
 	if (ret < 0) {
 		AB_ERR(astribank, "xusb_send failed: %d\n", ret);
 		return ret;
@@ -175,7 +184,7 @@ static int usb_buffer_flush(struct astribank_device *astribank, struct usb_buffe
 	return ret;
 }
 
-static int usb_buffer_append(struct astribank_device *astribank, struct usb_buffer *ub,
+static int usb_buffer_append(struct astribank *astribank, struct usb_buffer *ub,
 	char *buf, int len)
 {
 	if (ub->curr + len >= ub->max_len) {
@@ -188,7 +197,7 @@ static int usb_buffer_append(struct astribank_device *astribank, struct usb_buff
 	return len;
 }
 
-static int usb_buffer_send(struct astribank_device *astribank, struct usb_buffer *ub,
+static int usb_buffer_send(struct astribank *astribank, struct usb_buffer *ub,
 	char *buf, int len, int timeout, int recv_answer)
 {
 	int	ret = 0;
@@ -209,7 +218,7 @@ static int usb_buffer_send(struct astribank_device *astribank, struct usb_buffer
 		ret = usb_buffer_flush(astribank, ub);
 		if (ret < 0)
 			return ret;
-		ret = xusb_recv(astribank->xusb, buf, PACKET_SIZE, TIMEOUT);
+		ret = astribank_recv(astribank, 0, buf, PACKET_SIZE, TIMEOUT);
 		if (ret <= 0) {
 			AB_ERR(astribank, "No USB packs to read: %s\n", strerror(-ret));
 			return -EINVAL;
@@ -239,7 +248,7 @@ static int usb_buffer_send(struct astribank_device *astribank, struct usb_buffer
 	return ret;
 }
 
-int spi_send(struct astribank_device *astribank, uint16_t addr, uint16_t data, int recv_answer, int ver)
+int spi_send(struct astribank *astribank, uint16_t addr, uint16_t data, int recv_answer, int ver)
 {
 	int				ret;
 	char				buf[PACKET_SIZE];
@@ -272,7 +281,7 @@ int spi_send(struct astribank_device *astribank, uint16_t addr, uint16_t data, i
 	return ret;
 }
 
-int test_send(struct astribank_device *astribank)
+int test_send(struct astribank *astribank)
 {
 	int                             ret;
 	char                            buf[PACKET_SIZE];
@@ -300,7 +309,7 @@ int test_send(struct astribank_device *astribank)
 	return ret;
 }
 
-int echo_send_data(struct astribank_device *astribank, const unsigned int addr, const unsigned int data)
+int echo_send_data(struct astribank *astribank, const unsigned int addr, const unsigned int data)
 {
 	int ret;
 /*	DBG("SEND: %04X -> [%04X]\n", data, addr);
@@ -330,7 +339,7 @@ failed:
 	return ret;
 }
 
-int echo_recv_data(struct astribank_device *astribank, const unsigned int addr)
+int echo_recv_data(struct astribank *astribank, const unsigned int addr)
 {
 	unsigned int data = 0x00;
 	int ret;
@@ -452,7 +461,7 @@ UINT32 Oct6100UserDriverWriteApi(tPOCT6100_WRITE_PARAMS f_pWriteParams)
 	const unsigned int 		addr 		= f_pWriteParams->ulWriteAddress;
 	const unsigned int 		data 		= f_pWriteParams->usWriteData;
 	const struct echo_mod		*echo_mod 	= (struct echo_mod *)(f_pWriteParams->pProcessContext);
-	struct astribank_device 	*astribank 	= echo_mod->astribank;
+	struct astribank 	*astribank 	= echo_mod->astribank;
 	int ret;
 
 	ret = echo_send_data(astribank, addr, data);
@@ -469,7 +478,7 @@ UINT32 Oct6100UserDriverWriteSmearApi(tPOCT6100_WRITE_SMEAR_PARAMS f_pSmearParam
 	unsigned int              	data;
 	unsigned int              	len;
 	const struct echo_mod           *echo_mod;
-	struct astribank_device   	*astribank;
+	struct astribank   	*astribank;
 	unsigned int 			i;
 
 	len = f_pSmearParams->ulWriteLength;
@@ -495,7 +504,7 @@ UINT32 Oct6100UserDriverWriteBurstApi(tPOCT6100_WRITE_BURST_PARAMS f_pBurstParam
 	unsigned int              	data;
 	unsigned int 			len 		= f_pBurstParams->ulWriteLength;
 	const struct echo_mod		*echo_mod 	= (struct echo_mod *)f_pBurstParams->pProcessContext;
-	struct astribank_device 	*astribank 	= echo_mod->astribank;
+	struct astribank 	*astribank 	= echo_mod->astribank;
 	unsigned int 			i;
 
 	for (i = 0; i < len; i++) {
@@ -516,7 +525,7 @@ UINT32 Oct6100UserDriverReadApi(tPOCT6100_READ_PARAMS f_pReadParams)
 {
 	const unsigned int              addr =  f_pReadParams->ulReadAddress;
 	const struct echo_mod		*echo_mod;
-	struct astribank_device 	*astribank;
+	struct astribank 	*astribank;
 	int ret;
 
 	echo_mod = (struct echo_mod *)f_pReadParams->pProcessContext;
@@ -535,7 +544,7 @@ UINT32 Oct6100UserDriverReadBurstApi(tPOCT6100_READ_BURST_PARAMS f_pBurstParams)
 	unsigned int              	addr;
 	unsigned int              	len;
 	const struct echo_mod		*echo_mod;
-	struct astribank_device 	*astribank;
+	struct astribank 	*astribank;
 	unsigned int 			i;
 
 	len = f_pBurstParams->ulReadLength;
@@ -555,13 +564,13 @@ UINT32 Oct6100UserDriverReadBurstApi(tPOCT6100_READ_BURST_PARAMS f_pBurstParams)
 	return cOCT6100_ERR_OK;
 }
 
-inline int get_ver(struct astribank_device *astribank)
+inline int get_ver(struct astribank *astribank)
 {
 	return spi_send(astribank, 0, 0, 1, 1);
 }
 
 //+++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
-UINT32 init_octasic(char *filename, struct astribank_device *astribank, struct span_specs *span_specs)
+UINT32 init_octasic(char *filename, struct astribank *astribank, struct span_specs *span_specs)
 {
 	int							cpld_ver;
 	struct echo_mod						*echo_mod;
@@ -838,7 +847,7 @@ UINT32 init_octasic(char *filename, struct astribank_device *astribank, struct s
 }
 //+++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
 
-int load_echo(struct astribank_device *astribank, char *filename, int default_is_alaw, const char *span_spec)
+int load_echo(struct astribank *astribank, char *filename, int default_is_alaw, const char *span_spec)
 {
 	int		ret;
 	UINT32		octasic_status;
@@ -868,7 +877,7 @@ int load_echo(struct astribank_device *astribank, char *filename, int default_is
 	return 0;
 }
 
-int echo_ver(struct astribank_device *astribank)
+int echo_ver(struct astribank *astribank)
 {
 	usb_buffer_init(astribank, &usb_buffer);
 	return get_ver(astribank);

xpp/echo_loader.h

@@ -23,10 +23,10 @@
  */
 
 #include <stdint.h>
-#include "astribank_usb.h"
+#include "astribank.h"
 
-int spi_send(struct astribank_device *astribank, uint16_t addr, uint16_t data, int recv_answer, int ver);
-int load_echo(struct astribank_device *astribank, char *filename, int is_alaw, const char *span_spec);
-int echo_ver(struct astribank_device *astribank);
+int spi_send(struct astribank *astribank, uint16_t addr, uint16_t data, int recv_answer, int ver);
+int load_echo(struct astribank *astribank, char *filename, int is_alaw, const char *span_spec);
+int echo_ver(struct astribank *astribank);
 
 #endif	/* ECHO_LOADER_H */

xpp/hexfile.c

@@ -28,8 +28,6 @@
 #include <ctype.h>
 #include "hexfile.h"
 
-static const char rcsid[] = "$Id$";
-
 static parse_hexfile_report_func_t	report_func = NULL;
 
 parse_hexfile_report_func_t parse_hexfile_set_reporting(parse_hexfile_report_func_t rf)

xpp/hexfile.h

@@ -72,7 +72,11 @@ struct hexdata {
 
 __BEGIN_DECLS
 
-typedef void (*parse_hexfile_report_func_t)(int level, const char *msg, ...);
+typedef void (*parse_hexfile_report_func_t)(int level, const char *msg, ...)
+#ifdef	__GNUC__
+	__attribute__((format(printf,2,3)));
+#endif
+	;
 
 parse_hexfile_report_func_t parse_hexfile_set_reporting(parse_hexfile_report_func_t rf);
 void free_hexdata(struct hexdata *hexdata);

xpp/mpp.h

@@ -1,202 +0,0 @@
-#ifndef	MPP_H
-#define	MPP_H
-/*
- * Written by Oron Peled <oron@actcom.co.il>
- * Copyright (C) 2008, Xorcom
- *
- * All rights reserved.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
- *
- */
-
-/*
- * MPP - Managment Processor Protocol definitions
- */
-
-#include <mpptalk_defs.h>
-#include <stdint.h>
-#include <xtalk.h>
-
-#ifdef	__GNUC__
-#define	PACKED	__attribute__((packed))
-#else
-#error "We do not know how your compiler packs structures"
-#endif
-
-#define	MK_PROTO_VERSION(major, minor)	(((major) << 4) | (0x0F & (minor)))
-
-#define	MPP_PROTOCOL_VERSION	MK_PROTO_VERSION(1,4)
-#define	MPP_SUPPORTED_VERSION(x)	((x) == MK_PROTO_VERSION(1,3) || (x) == MK_PROTO_VERSION(1,4))
-
-/*
- * The eeprom_table is common to all eeprom types.
- */
-#define	LABEL_SIZE	8
-struct eeprom_table {
-	uint8_t		source;		/* C0 - small eeprom, C2 - large eeprom */
-	uint16_t	vendor;
-	uint16_t	product;
-	uint16_t	release;	/* BCD encoded release */
-	uint8_t		config_byte;	/* Must be 0 */
-	uint8_t		label[LABEL_SIZE];
-} PACKED;
-
-#define	VERSION_LEN	6
-struct firmware_versions {
-	char	usb[VERSION_LEN];
-	char	fpga[VERSION_LEN];
-	char	eeprom[VERSION_LEN];
-} PACKED;
-
-struct capabilities {
-	uint8_t		ports_fxs;
-	uint8_t		ports_fxo;
-	uint8_t		ports_bri;
-	uint8_t		ports_pri;
-	uint8_t		extra_features;	/* BIT(0) - TwinStar */
-	uint8_t		ports_echo;
-	uint8_t		reserved[2];
-	uint32_t	timestamp;
-} PACKED;
-
-#define	CAP_EXTRA_TWINSTAR(c)		((c)->extra_features & 0x01)
-#define	CAP_EXTRA_TWINSTAR_SET(c)	do {(c)->extra_features |= 0x01;} while (0)
-#define	CAP_EXTRA_TWINSTAR_CLR(c)	do {(c)->extra_features &= ~0x01;} while (0)
-
-#define	KEYSIZE	16
-
-struct capkey {
-	uint8_t	k[KEYSIZE];
-} PACKED;
-
-struct extrainfo {
-	char		text[EXTRAINFO_SIZE];
-} PACKED;
-
-struct mpp_header {
-	uint16_t	len;
-	uint16_t	seq;
-	uint8_t		op;	/* MSB: 0 - to device, 1 - from device */
-} PACKED;
-
-enum mpp_ser_op {
-	SER_CARD_INFO_GET	= 0x1,
-	SER_STAT_GET		= 0x3,
-/* Status bits */
-#define	SER_STAT_WATCHDOG_READY(s)	((s) & 0x01)
-#define	SER_STAT_XPD_ALIVE(s)		((s) & 0x02)
-};
-
-/* Individual commands structure */
-
-CMD_DEF(MPP, STATUS_GET);
-
-
-CMD_DEF(MPP, STATUS_GET_REPLY,
-	uint8_t	i2cs_data;
-
-#define	STATUS_FPGA_LOADED(x)	((x) & 0x01)
-	uint8_t	status;		/* BIT(0) - FPGA is loaded */
-	struct firmware_versions fw_versions;
-	);
-
-CMD_DEF(MPP, EEPROM_SET,
-	struct eeprom_table	data;
-	);
-
-CMD_DEF(MPP, CAPS_GET);
-
-CMD_DEF(MPP, CAPS_GET_REPLY,
-	struct eeprom_table	data;
-	struct capabilities	capabilities;
-	struct capkey		key;
-	);
-
-CMD_DEF(MPP, CAPS_SET,
-	struct eeprom_table	data;
-	struct capabilities	capabilities;
-	struct capkey		key;
-	);
-
-CMD_DEF(MPP, EXTRAINFO_GET);
-
-CMD_DEF(MPP, EXTRAINFO_GET_REPLY,
-	struct extrainfo	info;
-	);
-
-CMD_DEF(MPP, EXTRAINFO_SET,
-	struct extrainfo	info;
-	);
-
-CMD_DEF(MPP, RENUM);
-
-CMD_DEF(MPP, EEPROM_BLK_RD,
-	uint16_t	offset;
-	uint16_t	len;
-	);
-
-CMD_DEF(MPP, EEPROM_BLK_RD_REPLY,
-	uint16_t	offset;
-	uint8_t		data[0];
-	);
-
-CMD_DEF(MPP, DEV_SEND_START,
-	uint8_t		dest;
-	char		ihex_version[VERSION_LEN];
-	);
-
-CMD_DEF(MPP, DEV_SEND_END);
-
-CMD_DEF(MPP, DEV_SEND_SEG,
-	uint16_t	offset;
-	uint8_t		data[0];
-	);
-
-CMD_DEF(MPP, RESET);
-CMD_DEF(MPP, HALF_RESET);
-
-CMD_DEF(MPP, SER_SEND,
-	uint8_t	data[0];
-	);
-
-CMD_DEF(MPP, SER_RECV,
-	uint8_t	data[0];
-	);
-
-CMD_DEF(MPP, TWS_WD_MODE_SET,
-	uint8_t		wd_active;
-	);
-
-CMD_DEF(MPP, TWS_WD_MODE_GET);
-CMD_DEF(MPP, TWS_WD_MODE_GET_REPLY,
-	uint8_t		wd_active;
-	);
-
-CMD_DEF(MPP, TWS_PORT_SET,
-	uint8_t		portnum;
-	);
-
-CMD_DEF(MPP, TWS_PORT_GET);
-CMD_DEF(MPP, TWS_PORT_GET_REPLY,
-	uint8_t		portnum;
-	);
-
-CMD_DEF(MPP, TWS_PWR_GET);
-CMD_DEF(MPP, TWS_PWR_GET_REPLY,
-	uint8_t		power;
-	);
-
-#endif	/* MPP_H */

xpp/mpptalk.h

@@ -1,5 +1,5 @@
-#ifndef	MPP_FUNCS_H
-#define	MPP_FUNCS_H
+#ifndef	MPPTALK_H
+#define	MPPTALK_H
 /*
  * Written by Oron Peled <oron@actcom.co.il>
  * Copyright (C) 2008, Xorcom
@@ -22,64 +22,152 @@
  *
  */
 
-#include <stdint.h>
-#include <stdio.h>
-
-#include "mpp.h"
-#include "astribank_usb.h"
-
-struct astribank_device;
-struct eeprom_table;
-struct extrainfo;
-struct capabilities;
-struct capkey;
-
-#define	TIMEOUT	6000
-
-/* high-level */
-struct astribank_device *mpp_init(const char devpath[], int iface_num);
-void mpp_exit(struct astribank_device *astribank);
-int mpp_proto_query(struct astribank_device *astribank);
-int mpp_status_query(struct astribank_device *astribank);
-int mpp_eeprom_set(struct astribank_device *astribank, const struct eeprom_table *et);
-int mpp_renumerate(struct astribank_device *astribank);
-int mpp_caps_get(struct astribank_device *astribank,
-		struct eeprom_table *et,
-		struct capabilities *cap,
-		struct capkey *key);
-int mpp_caps_set(struct astribank_device *astribank,
-		const struct eeprom_table *eeprom_table,
-		const struct capabilities *capabilities,
-		const struct capkey *key);
-int mpp_extrainfo_get(struct astribank_device *astribank, struct extrainfo *info);
-int mpp_extrainfo_set(struct astribank_device *astribank, const struct extrainfo *info);
-int mpp_eeprom_blk_rd(struct astribank_device *astribank, uint8_t *buf, uint16_t offset, uint16_t len);
-int mpp_send_start(struct astribank_device *astribank, int dest, const char *ihex_version);
-int mpp_send_end(struct astribank_device *astribank);
-int mpp_send_seg(struct astribank_device *astribank, const uint8_t *data, uint16_t offset, uint16_t len);
-int mpp_reset(struct astribank_device *astribank, int full_reset);
-int mpp_serial_cmd(struct astribank_device *astribank, const uint8_t *in, uint8_t *out, uint16_t len);
-void show_eeprom(const struct eeprom_table *eprm, FILE *fp);
-void show_capabilities(const struct capabilities *capabilities, FILE *fp);
-void show_astribank_status(struct astribank_device *astribank, FILE *fp);
-void show_extrainfo(const struct extrainfo *extrainfo, FILE *fp);
-int twinstar_show(struct astribank_device *astribank, FILE *fp);
+#ifdef __cplusplus
+extern "C"
+{
+#endif /* __cplusplus */
 
 /*
- * Serial commands to FPGA
+ * MPPTALK - Example XTALK dialect
  */
-int mpps_card_info(struct astribank_device *astribank, int unit, uint8_t *card_type, uint8_t *card_status);
-int mpps_stat(struct astribank_device *astribank, int unit, uint8_t *maincard_version, uint8_t *status);
+
+#include <xtalk/proto.h>
+#include <xtalk/proto_sync.h>
+
+#ifdef	__GNUC__
+#define	PACKED	__attribute__((packed))
+#else
+#define	PACKED
+#endif
+
+/*---------------- Common types --------------------*/
+
+/*
+ * The eeprom_table is common to all eeprom types.
+ */
+#define	LABEL_SIZE	8
+struct eeprom_table {
+	uint8_t		source;		/* C0 - small eeprom, C2 - large eeprom */
+	uint16_t	vendor;
+	uint16_t	product;
+	uint16_t	release;	/* BCD encoded release */
+	uint8_t		config_byte;	/* Must be 0 */
+	uint8_t		label[LABEL_SIZE];
+} PACKED;
+
+#define	VERSION_LEN	6
+struct firmware_versions {
+	char	usb[VERSION_LEN];
+	char	fpga[VERSION_LEN];
+	char	eeprom[VERSION_LEN];
+} PACKED;
+
+struct capabilities {
+	uint8_t		ports_fxs;
+	uint8_t		ports_fxo;
+	uint8_t		ports_bri;
+	uint8_t		ports_pri;
+	uint8_t		extra_features;	/* BIT(0) - TwinStar */
+	uint8_t		ports_echo;
+	uint8_t		reserved[2];
+	uint32_t	timestamp;
+} PACKED;
+
+#define	CAP_EXTRA_TWINSTAR(c)		((c)->extra_features & 0x01)
+#define	CAP_EXTRA_TWINSTAR_SET(c)	do {(c)->extra_features |= 0x01;} while (0)
+#define	CAP_EXTRA_TWINSTAR_CLR(c)	do {(c)->extra_features &= ~0x01;} while (0)
+
+#define	KEYSIZE	16
+struct capkey {
+	uint8_t	k[KEYSIZE];
+} PACKED;
+
+#define	EXTRAINFO_SIZE	24
+struct extrainfo {
+	char		text[EXTRAINFO_SIZE];
+} PACKED;
+
+struct mpp_header {
+	uint16_t	len;
+	uint16_t	seq;
+	uint8_t		op;	/* MSB: 0 - to device, 1 - from device */
+} PACKED;
+
+enum mpp_ser_op {
+	SER_CARD_INFO_GET	= 0x1,
+	SER_STAT_GET		= 0x3,
+/* Status bits */
+#define	SER_STAT_WATCHDOG_READY(s)	((s) & 0x01)
+#define	SER_STAT_XPD_ALIVE(s)		((s) & 0x02)
+};
+
+/* EEPROM_QUERY: i2cs(ID1, ID0) */
+enum eeprom_type {
+	EEPROM_TYPE_NONE	= 0,
+	EEPROM_TYPE_SMALL	= 1,
+	EEPROM_TYPE_LARGE	= 2,
+	EEPROM_TYPE_UNUSED	= 3,
+};
+
+enum dev_dest {
+	DEST_NONE	= 0x00,
+	DEST_FPGA	= 0x01,
+	DEST_EEPROM	= 0x02,
+};
+
+
+/*---------------- PROTOCOL ------------------------*/
+/* API */
+struct mpp_device;
+
+struct mpp_device *mpp_new(struct xusb_iface *iface);
+void mpp_delete(struct mpp_device *dev);
+struct xusb_iface *xubs_iface_of_mpp(struct mpp_device *mpp);
+int mpp_status_query(struct mpp_device *mpp_dev);
+
+enum eeprom_type mpp_eeprom_type(struct mpp_device *mpp_dev);
+
+void show_eeprom(const struct eeprom_table *eprm, FILE *fp);
+void show_capabilities(const struct capabilities *capabilities, FILE *fp);
+void show_astribank_status(struct mpp_device *mpp_dev, FILE *fp);
+void show_extrainfo(const struct extrainfo *extrainfo, FILE *fp);
+int twinstar_show(struct mpp_device *mpp, FILE *fp);
+int show_hardware(struct mpp_device *mpp_dev);
+
+int mpp_renumerate(struct mpp_device *mpp_dev);
+int mpp_send_start(struct mpp_device *mpp_dev, int dest, const char *ihex_version);
+int mpp_send_end(struct mpp_device *mpp_dev);
+int mpp_send_seg(struct mpp_device *mpp_dev, const uint8_t *data, uint16_t offset, uint16_t len);
+int mpp_reset(struct mpp_device *mpp_dev, int full_reset);
+
+int mpp_caps_get(struct mpp_device *mpp_dev,
+	struct eeprom_table *eeprom_table,
+	struct capabilities *capabilities,
+	struct capkey *key);
+int mpp_caps_set(struct mpp_device *mpp_dev,
+	const struct eeprom_table *eeprom_table,
+	const struct capabilities *capabilities,
+	const struct capkey *key);
+
+/*
+ * serial sub-protocol to FPGA
+ */
+int mpps_card_info(struct mpp_device *mpp, int unit, uint8_t *card_type, uint8_t *card_status);
+int mpps_stat(struct mpp_device *mpp, int unit, uint8_t *maincard_version, uint8_t *status);
 
 /*
  * Twinstar
  */
-int mpp_tws_watchdog(struct astribank_device *astribank);
-int mpp_tws_setwatchdog(struct astribank_device *astribank, int yes);
-int mpp_tws_powerstate(struct astribank_device *astribank);
-int mpp_tws_portnum(struct astribank_device *astribank);
-int mpp_tws_setportnum(struct astribank_device *astribank, uint8_t portnum);
+int mpp_tws_watchdog(struct mpp_device *mpp);
+int mpp_tws_setwatchdog(struct mpp_device *mpp, int yes);
+int mpp_tws_powerstate(struct mpp_device *mpp);
+int mpp_tws_portnum(struct mpp_device *mpp);
+int mpp_tws_setportnum(struct mpp_device *mpp, uint8_t portnum);
 
 const char *dev_dest2str(int dest);
 
-#endif	/* MPP_FUNCS_H */
+#ifdef __cplusplus
+}
+#endif /* __cplusplus */
+
+#endif	/* MPPTALK_H */

xpp/mpptalk_defs.h

@@ -1,113 +0,0 @@
-#ifndef	MPPTALK_DEFS_H
-#define	MPPTALK_DEFS_H
-/*
- * Written by Oron Peled <oron@actcom.co.il>
- * Copyright (C) 2008,2009,2010 Xorcom
- *
- * All rights reserved.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
- *
- */
-
-#include <xtalk_defs.h>
-/*
- * MPP - Managment Processor Protocol definitions
- */
-
-/*
- * OP Codes:
- * MSB of op signifies a reply from device
- */
-#define	MPP_RENUM			0x0B	/* Trigger USB renumeration */
-#define	MPP_EEPROM_SET			0x0D
-
-/* AB capabilities	*/
-#define	MPP_CAPS_GET			0x0E
-#define	MPP_CAPS_GET_REPLY		0x8E
-#define	MPP_CAPS_SET			0x0F
-
-#define	MPP_DEV_SEND_START		0x05
-#define	MPP_DEV_SEND_SEG		0x07
-#define	MPP_DEV_SEND_END		0x09
-
-/* Astribank Status	*/
-#define	MPP_STATUS_GET			0x11
-#define	MPP_STATUS_GET_REPLY		0x91
-#define	MPP_STATUS_GET_REPLY_V13	0x91	/* backward compat */
-
-/* Get extra vendor information	*/
-#define	MPP_EXTRAINFO_GET		0x13
-#define	MPP_EXTRAINFO_GET_REPLY		0x93
-#define	MPP_EXTRAINFO_SET		0x15	/* Set extra vendor information	*/
-
-#define	MPP_EEPROM_BLK_RD		0x27
-#define	MPP_EEPROM_BLK_RD_REPLY		0xA7
-
-#define	MPP_SER_SEND			0x37
-#define	MPP_SER_RECV			0xB7
-
-#define	MPP_RESET			0x45	/* Reset both FPGA and USB firmwares */
-#define	MPP_HALF_RESET			0x47	/* Reset only FPGA firmware */
-
-/* Twinstar */
-#define	MPP_TWS_WD_MODE_SET		0x31	/* Set watchdog off/on guard	*/
-#define	MPP_TWS_WD_MODE_GET		0x32	/* Current watchdog mode 	*/
-#define	MPP_TWS_WD_MODE_GET_REPLY	0xB2	/* Current watchdog mode 	*/
-#define	MPP_TWS_PORT_SET		0x34	/* USB-[0/1]			*/
-#define	MPP_TWS_PORT_GET		0x35	/* USB-[0/1]			*/
-#define	MPP_TWS_PORT_GET_REPLY		0xB5	/* USB-[0/1]			*/
-#define	MPP_TWS_PWR_GET			0x36	/* Power: bits -> USB ports	*/
-#define	MPP_TWS_PWR_GET_REPLY		0xB6	/* Power: bits -> USB ports	*/
-
-/*
- * Statuses
- */
-#define	STAT_OK		0x00	/* acknowledges previous command	*/
-#define	STAT_FAIL	0x01	/* Last command failed		*/
-#define	STAT_RESET_FAIL	0x02	/* reset failed				*/
-#define	STAT_NODEST	0x03	/* No destination is selected		*/
-#define	STAT_MISMATCH	0x04	/* Data mismatch			*/
-#define	STAT_NOACCESS	0x05	/* No access				*/
-#define	STAT_BAD_CMD	0x06	/* Bad command				*/
-#define	STAT_TOO_SHORT	0x07	/* Packet is too short			*/
-#define	STAT_ERROFFS	0x08	/* Offset error				*/
-#define	STAT_NOCODE	0x09	/* Source was not burned before		*/
-#define	STAT_NO_LEEPROM	0x0A	/* Large EEPROM was not found		*/
-#define	STAT_NO_EEPROM	0x0B	/* No EEPROM was found			*/
-#define	STAT_WRITE_FAIL	0x0C	/* Writing to device failed		*/
-#define	STAT_FPGA_ERR	0x0D	/* FPGA error				*/
-#define	STAT_KEY_ERR	0x0E	/* Bad Capabilities Key			*/
-#define	STAT_NOCAPS_ERR	0x0F	/* No matching capability		*/
-#define	STAT_NOPWR_ERR	0x10	/* No power on USB connector		*/
-#define	STAT_CAPS_FPGA_ERR	0x11	/* Setting of the capabilities while FPGA is loaded */
-
-/* EEPROM_QUERY: i2cs(ID1, ID0) */
-enum eeprom_type {
-	EEPROM_TYPE_NONE	= 0,
-	EEPROM_TYPE_SMALL	= 1,
-	EEPROM_TYPE_LARGE	= 2,
-	EEPROM_TYPE_UNUSED	= 3,
-};
-
-enum dev_dest {
-	DEST_NONE	= 0x00,
-	DEST_FPGA	= 0x01,
-	DEST_EEPROM	= 0x02,
-};
-
-#define	EXTRAINFO_SIZE	24
-
-#endif	/* MPPTALK_DEFS_H */

xpp/oct612x/Makefile

@@ -1,38 +0,0 @@
-CFLAGS=-V3.4 -ffunction-sections -I/lib/modules/$(shell uname -r)/build/include -Iinclude -Ioctdeviceapi -Ioctdeviceapi/oct6100api -DGFP_ATOMIC=0 -Dkmalloc=calloc -Dkfree=free
-LDFLAGS=-V3.4 -Wl,-Map -Wl,test.map -Wl,--gc-sections
-
-APIDIR=octdeviceapi/oct6100api/oct6100_api
-
-OCTASIC_OBJS=$(APIDIR)/oct6100_adpcm_chan.o \
-	    $(APIDIR)/oct6100_channel.o \
-	    $(APIDIR)/oct6100_chip_open.o \
-	    $(APIDIR)/oct6100_chip_stats.o \
-	    $(APIDIR)/oct6100_conf_bridge.o \
-	    $(APIDIR)/oct6100_debug.o \
-	    $(APIDIR)/oct6100_events.o \
-	    $(APIDIR)/oct6100_interrupts.o \
-	    $(APIDIR)/oct6100_memory.o \
-	    $(APIDIR)/oct6100_miscellaneous.o \
-	    $(APIDIR)/oct6100_mixer.o \
-	    $(APIDIR)/oct6100_phasing_tsst.o \
-	    $(APIDIR)/oct6100_playout_buf.o \
-	    $(APIDIR)/oct6100_remote_debug.o \
-	    $(APIDIR)/oct6100_tlv.o \
-	    $(APIDIR)/oct6100_tone_detection.o \
-	    $(APIDIR)/oct6100_tsi_cnct.o \
-	    $(APIDIR)/oct6100_tsst.o \
-	    $(APIDIR)/oct6100_user.o \
-	    apilib/bt/octapi_bt0.o \
-	    apilib/largmath/octapi_largmath.o \
-	    apilib/llman/octapi_llman.o
-
-
-all: test
-
-test.o: test.c
-
-test: test.o $(OCTASIC_OBJS)
-
-clean:
-	rm -rf test test.o
-	rm -rf $(OCTASIC_OBJS)

xpp/oct612x/Makefile.am

@@ -0,0 +1,119 @@
+GLOBAL_CFLAGS	= -Wall -Werror
+
+OCTASIC_DEFINES	= \
+	-DPTR_TYPE=uint32_t	\
+	-DcOCT6100_INTERNAL_SUPER_ARRAY_SIZE=1024	\
+	-DcOCT6100_MAX_ECHO_CHANNELS=672		\
+	-DcOCT6100_MAX_MIXER_EVENTS=1344
+
+noinst_LTLIBRARIES	= liboctasic.la
+
+# Taken from octasic-helper
+liboctasic_la_SOURCES	= \
+	octdeviceapi/oct6100api/oct6100_api/oct6100_adpcm_chan.c \
+	octdeviceapi/oct6100api/oct6100_api/oct6100_channel.c \
+	octdeviceapi/oct6100api/oct6100_api/oct6100_chip_open.c \
+	octdeviceapi/oct6100api/oct6100_api/oct6100_chip_stats.c \
+	octdeviceapi/oct6100api/oct6100_api/oct6100_conf_bridge.c \
+	octdeviceapi/oct6100api/oct6100_api/oct6100_debug.c \
+	octdeviceapi/oct6100api/oct6100_api/oct6100_events.c \
+	octdeviceapi/oct6100api/oct6100_api/oct6100_interrupts.c \
+	octdeviceapi/oct6100api/oct6100_api/oct6100_memory.c \
+	octdeviceapi/oct6100api/oct6100_api/oct6100_miscellaneous.c \
+	octdeviceapi/oct6100api/oct6100_api/oct6100_mixer.c \
+	octdeviceapi/oct6100api/oct6100_api/oct6100_phasing_tsst.c \
+	octdeviceapi/oct6100api/oct6100_api/oct6100_playout_buf.c \
+	octdeviceapi/oct6100api/oct6100_api/oct6100_remote_debug.c \
+	octdeviceapi/oct6100api/oct6100_api/oct6100_tlv.c \
+	octdeviceapi/oct6100api/oct6100_api/oct6100_tone_detection.c \
+	octdeviceapi/oct6100api/oct6100_api/oct6100_tsi_cnct.c \
+	octdeviceapi/oct6100api/oct6100_api/oct6100_tsst.c \
+	apilib/bt/octapi_bt0.c \
+	apilib/largmath/octapi_largmath.c \
+	apilib/llman/octapi_llman.c
+
+noinst_HEADERS	= \
+		apilib/bt/octapi_bt0_private.h	\
+		apilib/llman/octapi_llman_private.h	\
+		include/apilib/octapi_bt0.h	\
+		include/apilib/octapi_largmath.h	\
+		include/apilib/octapi_llman.h	\
+		include/digium_unused.h	\
+		include/oct6100api/oct6100_adpcm_chan_inst.h	\
+		include/oct6100api/oct6100_adpcm_chan_pub.h	\
+		include/oct6100api/oct6100_api.h	\
+		include/oct6100api/oct6100_api_inst.h	\
+		include/oct6100api/oct6100_apimi.h	\
+		include/oct6100api/oct6100_apiud.h	\
+		include/oct6100api/oct6100_channel_inst.h	\
+		include/oct6100api/oct6100_channel_pub.h	\
+		include/oct6100api/oct6100_chip_open_inst.h	\
+		include/oct6100api/oct6100_chip_open_pub.h	\
+		include/oct6100api/oct6100_chip_stats_inst.h	\
+		include/oct6100api/oct6100_chip_stats_pub.h	\
+		include/oct6100api/oct6100_conf_bridge_inst.h	\
+		include/oct6100api/oct6100_conf_bridge_pub.h	\
+		include/oct6100api/oct6100_debug_inst.h	\
+		include/oct6100api/oct6100_debug_pub.h	\
+		include/oct6100api/oct6100_defines.h	\
+		include/oct6100api/oct6100_errors.h	\
+		include/oct6100api/oct6100_events_inst.h	\
+		include/oct6100api/oct6100_events_pub.h	\
+		include/oct6100api/oct6100_interrupts_inst.h	\
+		include/oct6100api/oct6100_interrupts_pub.h	\
+		include/oct6100api/oct6100_mixer_inst.h	\
+		include/oct6100api/oct6100_mixer_pub.h	\
+		include/oct6100api/oct6100_phasing_tsst_inst.h	\
+		include/oct6100api/oct6100_phasing_tsst_pub.h	\
+		include/oct6100api/oct6100_playout_buf_inst.h	\
+		include/oct6100api/oct6100_playout_buf_pub.h	\
+		include/oct6100api/oct6100_remote_debug_inst.h	\
+		include/oct6100api/oct6100_remote_debug_pub.h	\
+		include/oct6100api/oct6100_tlv_inst.h	\
+		include/oct6100api/oct6100_tone_detection_inst.h	\
+		include/oct6100api/oct6100_tone_detection_pub.h	\
+		include/oct6100api/oct6100_tsi_cnct_inst.h	\
+		include/oct6100api/oct6100_tsi_cnct_pub.h	\
+		include/oct6100api/oct6100_tsst_inst.h	\
+		include/octdef.h	\
+		include/octmac.h	\
+		include/octosdependant.h	\
+		include/octrpc/oct6100_rpc_protocol.h	\
+		include/octrpc/rpc_protocol.h	\
+		include/octtype.h	\
+		include/octtypevx.h	\
+		include/octtypewin.h	\
+		#
+
+liboctasic_la_CFLAGS	= \
+	$(GLOBAL_CFLAGS) \
+	$(OCTASIC_DEFINES) \
+	$(OCTASIC_CFLAGS)
+
+
+EXTRA_DIST	= \
+		get_discards	\
+		octasic-helper	\
+		octdeviceapi/oct6100api/oct6100_adpcm_chan_priv.h	\
+		octdeviceapi/oct6100api/oct6100_api/oct6100_user.c	\
+		octdeviceapi/oct6100api/oct6100_apimi/oct6100_mask_interrupts.c	\
+		octdeviceapi/oct6100api/oct6100_channel_priv.h	\
+		octdeviceapi/oct6100api/oct6100_chip_open_priv.h	\
+		octdeviceapi/oct6100api/oct6100_chip_stats_priv.h	\
+		octdeviceapi/oct6100api/oct6100_conf_bridge_priv.h	\
+		octdeviceapi/oct6100api/oct6100_debug_priv.h	\
+		octdeviceapi/oct6100api/oct6100_events_priv.h	\
+		octdeviceapi/oct6100api/oct6100_interrupts_priv.h	\
+		octdeviceapi/oct6100api/oct6100_memory_priv.h	\
+		octdeviceapi/oct6100api/oct6100_miscellaneous_priv.h	\
+		octdeviceapi/oct6100api/oct6100_mixer_priv.h	\
+		octdeviceapi/oct6100api/oct6100_phasing_tsst_priv.h	\
+		octdeviceapi/oct6100api/oct6100_playout_buf_priv.h	\
+		octdeviceapi/oct6100api/oct6100_remote_debug_priv.h	\
+		octdeviceapi/oct6100api/oct6100_tlv_priv.h	\
+		octdeviceapi/oct6100api/oct6100_tone_detection_priv.h	\
+		octdeviceapi/oct6100api/oct6100_tsi_cnct_priv.h	\
+		octdeviceapi/oct6100api/oct6100_tsst_priv.h	\
+		octdeviceapi/oct6100api/oct6100_version.h	\
+		test.c	\
+		#

xpp/perl_modules/Dahdi/Hardware/PCI.pm

@@ -109,6 +109,10 @@ my %pci_ids = (
 
 	# from wcb4xxp
 	'd161:b410'		=> { DRIVER => 'wcb4xxp', DESCRIPTION => 'Digium Wildcard B410P' },
+	'd161:8014'		=> { DRIVER => 'wcb4xxp', DESCRIPTION => 'Digium Wildcard B433' },
+	'd161:8015'		=> { DRIVER => 'wcb4xxp', DESCRIPTION => 'Digium Wildcard B434' },
+	'd161:8016'		=> { DRIVER => 'wcb4xxp', DESCRIPTION => 'Digium Wildcard B233' },
+	'd161:8017'		=> { DRIVER => 'wcb4xxp', DESCRIPTION => 'Digium Wildcard B234' },
 
 	# from tor2
 	'10b5:9030'		=> { DRIVER => 'tor2', DESCRIPTION => 'PLX 9030' },

xpp/perl_modules/Makefile.am

@@ -0,0 +1,27 @@
+perllibdir		= @perllibdir@
+nobase_perllib_DATA	= \
+	Dahdi.pm \
+	Dahdi/Hardware.pm \
+	Dahdi/Xpp/Line.pm \
+	Dahdi/Xpp/Xbus.pm \
+	Dahdi/Xpp/Xpd.pm \
+	Dahdi/Xpp/Mpp.pm \
+	Dahdi/Span.pm \
+	Dahdi/Utils.pm \
+	Dahdi/Chans.pm \
+	Dahdi/Xpp.pm \
+	Dahdi/Config/Params.pm \
+	Dahdi/Config/Gen/Xpporder.pm \
+	Dahdi/Config/Gen/Spantypes.pm \
+	Dahdi/Config/Gen/Modules.pm \
+	Dahdi/Config/Gen/Users.pm \
+	Dahdi/Config/Gen/Freepbxdb.pm \
+	Dahdi/Config/Gen/Unicall.pm \
+	Dahdi/Config/Gen/Chandahdi.pm \
+	Dahdi/Config/Gen/Assignedspans.pm \
+	Dahdi/Config/Gen/System.pm \
+	Dahdi/Config/Gen.pm \
+	Dahdi/Hardware/USB.pm \
+	Dahdi/Hardware/PCI.pm
+
+EXTRA_DIST	= $(nobase_perllib_DATA)

xpp/pic_loader.c

@@ -25,12 +25,12 @@
 #include <stdlib.h>
 #include <errno.h>
 #include <regex.h>
+#include <xtalk/debug.h>
+#include <xtalk/xusb.h>
 #include "hexfile.h"
 #include "pic_loader.h"
-#include <debug.h>
-#include <xusb.h>
 
-#define	DBG_MASK	0x03
+#define	DBG_MASK	0x20
 #define	MAX_HEX_LINES	10000
 #define	TIMEOUT		500
 
@@ -57,7 +57,7 @@ struct xpp_packet_header {
 	} d;
 } PACKED;
 
-int send_picline(struct astribank_device *astribank, uint8_t card_type, enum pic_command pcmd, int offs, uint8_t *data, int data_len)
+int send_picline(struct astribank *ab, uint8_t card_type, enum pic_command pcmd, int offs, uint8_t *data, int data_len)
 {
 	int				recv_answer = 0;
 	char				buf[PACKET_SIZE];
@@ -65,7 +65,7 @@ int send_picline(struct astribank_device *astribank, uint8_t card_type, enum pic
 	int				pack_len;
 	int				ret;
 
-	assert(astribank != NULL);
+	assert(ab != NULL);
 	pack_len = data_len + sizeof(phead->header) + sizeof(phead->d.pic_packet.pic_header);
 	phead->header.len 		= pack_len;
 	phead->header.op 		= PIC_REQ_XOP;
@@ -90,14 +90,14 @@ int send_picline(struct astribank_device *astribank, uint8_t card_type, enum pic
 	DBG("PICLINE: pack_len=%d pcmd=%d\n", pack_len, pcmd);
 	dump_packet(LOG_DEBUG, DBG_MASK, "dump:picline[W]", (char *)phead, pack_len);
 
-	ret = xusb_send(astribank->xusb, buf, pack_len, TIMEOUT);
+	ret = astribank_send(ab, 0, buf, pack_len, TIMEOUT);
 	if(ret < 0) {
-		ERR("xusb_send failed: %d\n", ret);
+		ERR("astribank_send failed: %d\n", ret);
 		return ret;
 	}
-	DBG("xusb_send: Written %d bytes\n", ret);
+	DBG("astribank_send: Written %d bytes\n", ret);
 	if (recv_answer) {
-		ret = xusb_recv(astribank->xusb, buf, sizeof(buf), TIMEOUT);
+		ret = astribank_recv(ab, 0, buf, sizeof(buf), TIMEOUT);
 		if(ret <= 0) {
 			ERR("No USB packs to read\n");
 			return ret;
@@ -172,7 +172,7 @@ static const char *pic_basename(const char *fname, uint8_t *card_type)
 /*
  * Returns: true on success, false on failure
  */
-static int pic_burn(struct astribank_device *astribank, const struct hexdata *hexdata)
+static int pic_burn(struct astribank *ab, const struct hexdata *hexdata)
 {
 	const char		*v = hexdata->version_info;
 	const char		*basename;
@@ -182,18 +182,21 @@ static int pic_burn(struct astribank_device *astribank, const struct hexdata *he
 	int			ret;
 	unsigned int		i;
 	const char		*devstr;
+	const struct xusb_device *xusb;
 
 	v = (v[0]) ? v : "Unknown";
-	assert(astribank != NULL);
+	assert(ab != NULL);
 	assert(hexdata != NULL);
-	devstr = xusb_devpath(astribank->xusb);
-	if(!astribank->is_usb2) {
+	xusb = xusb_dev_of_astribank(ab);
+	devstr = xusb_devpath(xusb);
+	i = xusb_packet_size(xusb);
+	if(i != 512) {
 		ERR("%s: Skip PIC burning (not USB2)\n", devstr);
 		return 0;
 	}
 	INFO("%s [%s]: Loading PIC Firmware: %s (version %s)\n",
 		devstr,
-		xusb_serial(astribank->xusb),
+		xusb_serial(xusb),
 		hexdata->fname,
 		hexdata->version_info);
 	basename = pic_basename(hexdata->fname, &card_type);
@@ -209,10 +212,10 @@ static int pic_burn(struct astribank_device *astribank, const struct hexdata *he
 	for(i = 2; i; i--) {
 		char    buf[PACKET_SIZE];
 
-		if(xusb_recv(astribank->xusb, buf, sizeof(buf), 1) <= 0)
+		if (astribank_recv(ab, 0, buf, sizeof(buf), TIMEOUT) <= 0)
 			break;
 	}
-	if((ret = send_picline(astribank, card_type, PIC_START_FLAG, 0, NULL, 0)) != 0) {
+	if((ret = send_picline(ab, card_type, PIC_START_FLAG, 0, NULL, 0)) != 0) {
 		perror("Failed sending start hexline");
 		return 0;
 	}
@@ -233,7 +236,7 @@ static int pic_burn(struct astribank_device *astribank, const struct hexdata *he
 			}
 			data = hexline->d.content.tt_data.data;
 			check_sum ^= data[0] ^ data[1] ^ data[2];
-			ret = send_picline(astribank, card_type, PIC_DATA_FLAG,
+			ret = send_picline(ab, card_type, PIC_DATA_FLAG,
 					hexline->d.content.header.offset, data, len);
 			if(ret) {
 				perror("Failed sending data hexline");
@@ -247,7 +250,7 @@ static int pic_burn(struct astribank_device *astribank, const struct hexdata *he
 			return 0;
 		}
 	}
-	if((ret = send_picline(astribank, card_type, PIC_END_FLAG, 0, &check_sum, 1)) != 0) {
+	if((ret = send_picline(ab, card_type, PIC_END_FLAG, 0, &check_sum, 1)) != 0) {
 		perror("Failed sending end hexline");
 		return 0;
 	}
@@ -255,12 +258,12 @@ static int pic_burn(struct astribank_device *astribank, const struct hexdata *he
 	return 1;
 }
 
-int load_pic(struct astribank_device *astribank, int numfiles, char *filelist[])
+int load_pic(struct astribank *ab, int numfiles, char *filelist[])
 {
 	int		i;
 	const char	*devstr;
 
-	devstr = xusb_devpath(astribank->xusb);
+	devstr = xusb_devpath(xusb_dev_of_astribank(ab));
 	DBG("%s: Loading %d PIC files...\n", devstr, numfiles);
 	for(i = 0; i < numfiles; i++) {
 		struct hexdata	*picdata;
@@ -271,13 +274,13 @@ int load_pic(struct astribank_device *astribank, int numfiles, char *filelist[])
 			perror(curr);
 			return -errno;
 		}
-		if(!pic_burn(astribank, picdata)) {
+		if(!pic_burn(ab, picdata)) {
 			ERR("%s: PIC %s burning failed\n", devstr, curr);
 			return -ENODEV;
 		}
 		free_hexdata(picdata);
 	}
-	if((i = send_picline(astribank, 0, PIC_ENDS_FLAG, 0, NULL, 0)) != 0) {
+	if((i = send_picline(ab, 0, PIC_ENDS_FLAG, 0, NULL, 0)) != 0) {
 		ERR("%s: PIC end burning failed\n", devstr);
 		return -ENODEV;
 	}

xpp/pic_loader.h

@@ -23,7 +23,7 @@
  */
 
 #include <stdint.h>
-#include "astribank_usb.h"
+#include "astribank.h"
 
 /*
  * Astribank PIC loading
@@ -39,8 +39,8 @@ enum pic_command {
 #define	PIC_PACK_LEN 	0x0B
 #define PIC_LINE_LEN	0x03
 
-int send_picline(struct astribank_device *astribank, uint8_t card_type,
+int send_picline(struct astribank *astribank, uint8_t card_type,
 		enum pic_command pcmd, int offs, uint8_t *data, int data_len);
-int load_pic(struct astribank_device *astribank, int numfiles, char *filelist[]);
+int load_pic(struct astribank *astribank, int numfiles, char *filelist[]);
 
 #endif	/* PIC_LOADER_H */

xpp/waitfor_xpds

@@ -52,7 +52,7 @@ ab_serial_nums() {
 }
 
 detected_serial_nums() {
-	for i in /sys/bus/astribanks/devices/*/transport; do
+	for i in `ls -1d /sys/bus/astribanks/devices/*/transport 2>/dev/null`; do
 		s=`cat "$i/serial" 2>/dev/null` || :
 		if [ "$s" = '' ]; then
 			echo "NO-SERIAL"
@@ -89,19 +89,22 @@ waitfor_ab_initialization() {
 	done
 }
 
+clean_lines() {
+	sed -e 's/#.*//' -e 'y/\t/ /' -e 's/^ *//' -e 's/ *$//' -e '$s/$/\n/' "$1"
+}
+
 # Any hardware?
 if ! dahdi_hardware="`which dahdi_hardware 2>/dev/null`"; then
 	echo >&2 "$0: Missing dahdi_hardware"
 	exit 0
 fi
-if ! astribank_is_starting="`which astribank_is_starting 2>/dev/null`"; then
-	echo >&2 "$0: Missing astribank_is_starting"
-	exit 0
-fi
+
+# Just make sure
 if [ "`$dahdi_hardware | grep xpp_usb`" != "" ]; then
 	astribank_is_starting -v -a
 fi
 if ! astribank_is_starting; then
+	# No Astribanks ever seen -- nothing to do
 	exit 0
 fi
 
@@ -149,13 +152,22 @@ cat /sys/bus/astribanks/devices/*/waitfor_xpds 2> /dev/null || :
 
 # Wait for device to stabilize and XPD's to finish initalizations
 echo 1>&2 "Astribanks initializing spans"
-if [ "$XPP_HOTPLUG_DAHDI" = yes ]; then
-	if [ "$CALLED_FROM_ATRIBANK_HOOK" = '' ]; then
-		# Now we can wait until the hotplug run would remove the semaphore
-		echo -n 1>&2 "Other DAHDI initializations... "
-		astribank_is_starting -v -w 1>&2
+if [ "$XPP_HOTPLUG_DAHDI" = yes -a "$CALLED_FROM_ATRIBANK_HOOK" = '' -a \
+		"$ASTERISK_SUPPORTS_DAHDI_HOTPLUG" != 'yes'  ]; then
+	if [ ! -f /etc/dahdi/xpp_order ]; then
+		echo 1>&2 "WARNING: No ASTERISK_SUPPORTS_DAHDI_HOTPLUG" \
+			" and no /etc/dahdi/xpp_order"
+	else
+		count=`clean_lines /etc/dahdi/xpp_order | wc -l`
+		if [ "$count" -le 0 ]; then
+			echo 1>&2 "WARNING: No ASTERISK_SUPPORTS_DAHDI_HOTPLUG" \
+				" and empty /etc/dahdi/xpp_order"
+		else
+			# Now we can wait until the hotplug run would remove the semaphore
+			echo -n 1>&2 "Other DAHDI initializations... "
+			astribank_is_starting -v -w 1>&2
+		fi
 	fi
-else
-	# Non-hotplug -- Sequential initialization, remove semaphore
-	astribank_is_starting -v -r 1>&2
 fi
+# All Astribanks initialized -- remove semaphore
+astribank_is_starting -v -r 1>&2

xpp/xpp.rules

@@ -1,6 +1,7 @@
 # Load firmware into the Xorcom Astribank device:
 SUBSYSTEM=="usb", ACTION=="add", \
 ENV{PRODUCT}=="e4e4/11[3456][013]/*", ENV{DEVTYPE}!="usb_interface", \
+	OPTIONS+="event_timeout=180" \
 	RUN+="/usr/share/dahdi/xpp_fxloader udev $env{PRODUCT}"
 
 # Hotplug hook for Astribank up/down

xpp/xpp_fxloader

@@ -319,8 +319,9 @@ load_fw_device() {
 					if [ "$pri_spec_wildcard" != '' ]; then
 						debug "ECHO($dev_short): Found definitions for wildcard -- $pri_spec_wildcard"
 					fi
-					pri_spec=`echo "$pri_spec_wildcard $pri_spec" | tr -s ' \t\n' ','`
-					if [ "$pri_spec" != '' ]; then
+					pri_spec_params=""
+					if [ "$pri_spec$pri_spec_wildcard" != '' ]; then
+						pri_spec=`echo "$pri_spec_wildcard $pri_spec" | tr -s ' \t\n' ','`
 						pri_spec_params="-S $pri_spec"
 						debug "ECHO($dev_short): pri_spec_params='$pri_spec_params'"
 					fi
@@ -348,7 +349,7 @@ load_fw_device() {
 				echo "WARNING: ECHO burning was skipped (no capabilities)"
 			fi
 		fi
-		pic_files=`echo "$FIRMWARE_DIR"/PIC_TYPE_[1-4].hex`
+		pic_files=`echo "$FIRMWARE_DIR"/PIC_TYPE_[1-46].hex`
 		debug "PIC burning into $dev: begin $pic_files"
 		run_astribank_hexload -D "$dev" -p $pic_files
 		debug "PIC burning into $dev: end $pic_files"
@@ -442,7 +443,7 @@ fpga_firmware_all_devices() {
 reset_fpga() {
 	devices=`filter_devs 'e4e4/11[3456][124]/*'`
 	totaldevs=`numdevs 'e4e4/11[3456][124]/*'`
-	echo >&2 -- "Reseting devices [$totaldevs devices]"
+	echo >&2 -- "Resetting devices [$totaldevs devices]"
 	echo "$devices" | grep -v '^$' | while read id_str dev
 	do
 		(

xpp/xpp_fxloader.usermap

@@ -1,10 +0,0 @@
-# module	match_flags	idVendor	idProduct	bcdDevice_lo	bcdDevice_hi	bDeviceClass	bDeviceSubClass	bDeviceProtocol	bInterfaceClass	bInterfaceSubClass	bInterfaceProtocol	driver_info
-xpp_fxloader	0x0003		0x04b4		0x8613		0x0000		0x0000		0x00		0x00		0x00		0x00		0x00			0x00			0x0
-xpp_fxloader	0x0003		0xe4e4		0x1130		0x0000		0x0000		0x00		0x00		0x00		0x00		0x00			0x00			0x0
-xpp_fxloader	0x0003		0xe4e4		0x1131		0x0000		0x0000		0x00		0x00		0x00		0x00		0x00			0x00			0x0
-xpp_fxloader	0x0003		0xe4e4		0x1140		0x0000		0x0000		0x00		0x00		0x00		0x00		0x00			0x00			0x0
-xpp_fxloader	0x0003		0xe4e4		0x1141		0x0000		0x0000		0x00		0x00		0x00		0x00		0x00			0x00			0x0
-xpp_fxloader	0x0003		0xe4e4		0x1150		0x0000		0x0000		0x00		0x00		0x00		0x00		0x00			0x00			0x0
-xpp_fxloader	0x0003		0xe4e4		0x1151		0x0000		0x0000		0x00		0x00		0x00		0x00		0x00			0x00			0x0
-xpp_fxloader	0x0003		0xe4e4		0x1160		0x0000		0x0000		0x00		0x00		0x00		0x00		0x00			0x00			0x0
-xpp_fxloader	0x0003		0xe4e4		0x1161		0x0000		0x0000		0x00		0x00		0x00		0x00		0x00			0x00			0x0

xpp/xpp_sync

@@ -64,7 +64,7 @@ sub do_select(@) {
 	foreach my $xpd (@_) {
 		my $xbus = $xpd->xbus;
 		my $busnum = $xbus->name;
-		die "Uknown bus name" unless $busnum;
+		die "Unknown bus name" unless $busnum;
 		$busnum =~ s/XBUS-//;
 		die "bad bus name" unless $busnum =~ /^\d+$/;
 		#printf "Setting sync: %-10s (%s)\n", $xpd->fqn, $xpd->type;

xpp/xtalk/Makefile.am

@@ -0,0 +1,88 @@
+VISIBILITY_DEFS		= -DXTALK_DLL -DXTALK_DLL_EXPORTS
+COMMON_CFLAGS		= \
+		-Wall \
+		-Wno-unknown-pragmas \
+		-Werror \
+		$(VISIBILITY_DEFS) \
+		$(CFLAG_VISIBILITY)
+
+AM_CFLAGS		= $(COMMON_CFLAGS)
+
+
+if	LIBUSBX
+USB_CFLAGS		= $(LIBUSBX_CFLAGS)
+USB_LIBS		= $(LIBUSBX_LIBS)
+USB_NAME		= libusbx
+else
+if	LIBUSB
+USB_CFLAGS		= $(LIBUSB_CFLAGS)
+USB_LIBS		= $(LIBUSB_LIBS)
+USB_NAME		= libusb
+endif
+endif
+
+noinst_PROGRAMS		= xlist_test xusb_test xusb_test_bypath xtalk_test xtalk_raw_test xtalk_send
+noinst_LTLIBRARIES	= libxtalk.la
+dist_noinst_HEADERS	= \
+	xtalk_base.h	\
+	xusb_common.h	\
+	include/xtalk/proto_raw.h	\
+	include/xtalk/api_defs.h	\
+	include/xtalk/xlist.h	\
+	include/xtalk/proto_sync.h	\
+	include/xtalk/xusb_iface.h	\
+	include/xtalk/proto.h	\
+	include/xtalk/debug.h	\
+	include/xtalk/xusb.h	\
+	include/xtalk/firmware_defs.h	\
+	include/xtalk/xtalk_iface.h	\
+	#
+
+libxtalk_la_CFLAGS	= \
+		$(COMMON_CFLAGS) \
+		-I$(srcdir)/include \
+		-I$(srcdir) \
+		$(USB_CFLAGS) \
+		-DXTALK_OPTIONS_FILE=\"/etc/dahdi/xpp.conf\"
+
+libxtalk_la_LDFLAGS	= #
+libxtalk_la_LIBADD	= $(USB_LIBS)
+libxtalk_la_SOURCES	= \
+			$(dist_noinst_HEADERS) \
+			xtalk_sync.c \
+			xtalk_raw.c \
+			xtalk_base.c \
+			xlist.c \
+			debug.c \
+			xtalk-xusb.c	\
+			xusb_common.c
+if	LIBUSBX
+libxtalk_la_SOURCES	+= xusb_libusbx.c
+else
+if	LIBUSB
+libxtalk_la_SOURCES	+= xusb_libusb.c
+endif
+endif
+libxtalk_la_DEPENDENCIES	= $(libxtalk_la_SOURCES)
+
+xtalk_send_CFLAGS	= $(COMMON_CFLAGS) -I$(srcdir)/include -I$(srcdir)
+xtalk_send_LDADD	= libxtalk.la $(USB_LIBS)
+
+xtalk_test_CFLAGS	= $(COMMON_CFLAGS) -I$(srcdir)/include -I$(srcdir)
+xtalk_test_LDADD	= libxtalk.la $(USB_LIBS)
+
+xtalk_raw_test_CFLAGS	= $(COMMON_CFLAGS) -I$(srcdir)/include -I$(srcdir)
+xtalk_raw_test_LDADD	= libxtalk.la $(USB_LIBS)
+
+xusb_test_CFLAGS	= $(COMMON_CFLAGS) -I$(srcdir)/include -I$(srcdir)
+xusb_test_LDADD		= libxtalk.la $(USB_LIBS)
+
+xusb_test_bypath_CFLAGS	= $(COMMON_CFLAGS) -I$(srcdir)/include -I$(srcdir)
+xusb_test_bypath_LDADD		= libxtalk.la $(USB_LIBS)
+
+xlist_test_CFLAGS	= $(COMMON_CFLAGS) -I$(srcdir)/include -I$(srcdir)
+xlist_test_LDADD	= libxtalk.la $(USB_LIBS)
+
+DISTCLEANFILES		= xtalk.pc xtalk-uninstalled.pc
+
+EXTRA_DIST	= $(man_MANS)

xpp/xtalk/debug.c

@@ -27,7 +27,8 @@
 #include <stdarg.h>
 #include <syslog.h>
 #include <execinfo.h>
-#include <debug.h>
+#include <xtalk/debug.h>
+#include <autoconfig.h>
 
 int	verbose = LOG_INFO;
 int	debug_mask;

xpp/xtalk/include/xtalk/api_defs.h

@@ -0,0 +1,38 @@
+#ifndef	XTALK_API_DEFS_H
+#define	XTALK_API_DEFS_H
+
+/*
+ * Visibility settings: taken from:
+ *     http://gcc.gnu.org/wiki/Visibility
+ */
+
+/* Generic helper definitions for shared library support */
+#if __GNUC__ >= 4
+	#define XTALK_HELPER_DLL_IMPORT __attribute__ ((visibility ("default")))
+	#define XTALK_HELPER_DLL_EXPORT __attribute__ ((visibility ("default")))
+	#define XTALK_HELPER_DLL_LOCAL  __attribute__ ((visibility ("hidden")))
+#else
+	#define XTALK_HELPER_DLL_IMPORT
+	#define XTALK_HELPER_DLL_EXPORT
+	#define XTALK_HELPER_DLL_LOCAL
+#endif
+
+/*
+ * Now we use the generic helper definitions above to define XTALK_API and XTALK_LOCAL.
+ * XTALK_API is used for the public API symbols. It either DLL imports or DLL exports (or does nothing for static build)
+ * XTALK_LOCAL is used for non-api symbols.
+ */
+
+#ifdef XTALK_DLL /* defined if XTALK is compiled as a DLL */
+	#ifdef XTALK_DLL_EXPORTS /* defined if we are building the XTALK DLL (instead of using it) */
+		#define XTALK_API XTALK_HELPER_DLL_EXPORT
+	#else
+		#define XTALK_API XTALK_HELPER_DLL_IMPORT
+	#endif /* XTALK_DLL_EXPORTS */
+	#define XTALK_LOCAL XTALK_HELPER_DLL_LOCAL
+#else /* XTALK_DLL is not defined: this means XTALK is a static lib. */
+	#define XTALK_API
+	#define XTALK_LOCAL
+#endif /* XTALK_DLL */
+
+#endif	/* XTALK_API_DEFS_H */

xpp/xtalk/include/xtalk/debug.h

@@ -0,0 +1,53 @@
+#ifndef	DEBUG_H
+#define	DEBUG_H
+/*
+ * Written by Oron Peled <oron@actcom.co.il>
+ * Copyright (C) 2008, Xorcom
+ *
+ * All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+ *
+ */
+
+#include <syslog.h>
+#include <stdio.h>
+#include <xtalk/api_defs.h>
+
+/*
+ * Each module should define a unique DBG_MASK
+ */
+
+XTALK_API extern	int	verbose;
+XTALK_API extern	int	debug_mask;
+
+/*
+ * Logging
+ */
+XTALK_API void log_function(int level, int mask, const char *msg, ...)
+		__attribute__((format(printf, 3, 4)));
+
+#define	ERR(fmt, arg...) log_function(LOG_ERR, 0, "%s:%d: ERROR(%s): " fmt, \
+		__FILE__, __LINE__, __func__, ## arg)
+#define	WARN(fmt, arg...) log_function(LOG_WARNING, 0, "WARNING: " fmt, ## arg)
+#define	INFO(fmt, arg...) log_function(LOG_INFO, 0, "INFO: " fmt, ## arg)
+#define	DBG(fmt, arg...) log_function(LOG_DEBUG, DBG_MASK,	\
+		"%s:%d: DBG(%s): " fmt, __FILE__, __LINE__, __func__, ## arg)
+
+XTALK_API void dump_packet(int loglevel, int mask, const char *msg,
+		const char *buf, int len);
+XTALK_API void print_backtrace(FILE *fp);
+
+#endif	/* DEBUG_H */

xpp/xtalk/include/xtalk/firmware_defs.h

@@ -1,5 +1,5 @@
-#ifndef	XTALK_DEFS_H
-#define	XTALK_DEFS_H
+#ifndef	XTALK_FIRMWARE_DEFS_H
+#define	XTALK_FIRMWARE_DEFS_H
 
 #define	MAX_OPS			256	/* single byte */
 #define	MAX_STATUS		256	/* single byte */
@@ -8,18 +8,17 @@
 
 #define	PRIVATE_OP_FIRST	0x05
 #define	PRIVATE_OP_LAST		0x7F
-#define	IS_PRIVATE_OP(x)	( \
-		(((x) & ~(XTALK_REPLY_MASK)) >= PRIVATE_OP_FIRST) &&	\
-		(((x) & ~(XTALK_REPLY_MASK)) <= PRIVATE_OP_LAST)	\
-	)
+#define	IS_PRIVATE_OP(x)	(	\
+					(((x) & ~(XTALK_REPLY_MASK)) >= PRIVATE_OP_FIRST) &&	\
+					(((x) & ~(XTALK_REPLY_MASK)) <= PRIVATE_OP_LAST)	\
+				)
 
 #define	XTALK_ACK		0x80
 #define	XTALK_PROTO_GET		0x01
 #define	XTALK_PROTO_GET_REPLY	(XTALK_PROTO_GET | XTALK_REPLY_MASK)
 #define	XTALK_FWVERS_GET	0x11
 #define	XTALK_FWVERS_GET_REPLY	(XTALK_FWVERS_GET | XTALK_REPLY_MASK)
-/* Get EEPROM table contents Product/Vendor Id ... */
-#define XTALK_CAPS_GET		0x0E
+#define XTALK_CAPS_GET		0x0E	/* Get EEPROM table contents Product/Vendor Id ... */
 #define XTALK_CAPS_GET_REPLY	(XTALK_CAPS_GET | XTALK_REPLY_MASK)
 
 /*------------- XTALK: statuses in ACK ---------------------------------------*/
@@ -38,4 +37,4 @@
 #define	STAT_NOPWR_ERR		0x10	/* No power on USB connector  */
 
 
-#endif	/* XTALK_DEFS_H */
+#endif	/* XTALK_FIRMWARE_DEFS_H */

xpp/xtalk/include/xtalk/proto.h

@@ -1,5 +1,5 @@
-#ifndef	XTALK_H
-#define	XTALK_H
+#ifndef	XTALK_PROTO_H
+#define	XTALK_PROTO_H
 /*
  * Written by Oron Peled <oron@actcom.co.il>
  * Copyright (C) 2009, Xorcom
@@ -35,8 +35,8 @@ extern "C"
 
 #include <stdint.h>
 #include <stdlib.h>
-/* Definitions common to the firmware (in include/ directory) */
-#include <xtalk_defs.h>
+#include <xtalk/api_defs.h>
+#include <xtalk/firmware_defs.h>
 
 #ifdef	__GNUC__
 #define	PACKED	__attribute__((packed))
@@ -44,18 +44,25 @@ extern "C"
 #error "We do not know how your compiler packs structures"
 #endif
 
-struct xtalk_device;
+struct xtalk_base;
 struct xtalk_command_desc;
+struct xtalk_command;
 
+/*
+ * Callbacks should return negative errno's
+ * in case of errors.
+ * They are called from process_command() and their
+ * return values are propagated back.
+ */
 typedef int (*xtalk_cmd_callback_t)(
-	struct xtalk_device *xtalk_dev,
-	struct xtalk_command_desc *xtalk_cmd);
+	const struct xtalk_base *xtalk_base,
+	const struct xtalk_command_desc *cmd_desc,
+	struct xtalk_command *cmd);
 
 /* Describe a single xtalk command */
 struct xtalk_command_desc {
 	uint8_t			op;
 	const char		*name;
-	xtalk_cmd_callback_t	callback;
 	uint16_t		len;	/* Minimal length */
 };
 
@@ -102,12 +109,13 @@ struct xtalk_command {
 					__VA_ARGS__		\
 				} PACKED XTALK_STRUCT(p, o)
 #define	MEMBER(p, o)	struct XTALK_STRUCT(p, o) XTALK_STRUCT(p, o)
+#define	XTALK_OP(p, o)		(p ## _ ## o)
 
 /* Wrappers for transport (xusb) functions */
 struct xtalk_ops {
-	int	(*send_func)(void *transport_priv, void *data, size_t len,
+	int	(*send_func)(void *transport_priv, const char *data, size_t len,
 			int timeout);
-	int	(*recv_func)(void *transport_priv, void *data, size_t maxlen,
+	int	(*recv_func)(void *transport_priv, char *data, size_t maxlen,
 			int timeout);
 	int	(*close_func)(void *transport_priv);
 };
@@ -117,38 +125,39 @@ struct xtalk_ops {
  * should be included in the struct representing
  * the dialect.
  */
-struct xtalk_device;
+struct xtalk_base;
+struct xusb_iface;
 
 /* high-level */
-struct xtalk_device *xtalk_new(const struct xtalk_ops *ops,
-		size_t packet_size, void *transport_priv);
-void xtalk_delete(struct xtalk_device *dev);
-int xtalk_set_protocol(struct xtalk_device *xtalk_dev,
-		const struct xtalk_protocol *xproto);
-int xtalk_proto_query(struct xtalk_device *dev);
-void xtalk_dump_command(struct xtalk_command *cmd);
+XTALK_API struct xtalk_base *xtalk_base_new_on_xusb(struct xusb_iface *xusb_iface);
+XTALK_API struct xtalk_base *xtalk_base_new(const struct xtalk_ops *ops,
+	size_t packet_size, void *priv);
+XTALK_API void xtalk_base_delete(struct xtalk_base *xtalk_base);
+XTALK_API struct xusb_iface *xusb_iface_of_xtalk_base(const struct xtalk_base *xtalk_base);
+XTALK_API const char *xtalk_protocol_name(const struct xtalk_base *dev);
+XTALK_API int xtalk_cmd_callback(struct xtalk_base *xtalk_base, int op,
+		xtalk_cmd_callback_t callback,
+		xtalk_cmd_callback_t *old_callback);
+XTALK_API void xtalk_dump_command(struct xtalk_command *cmd);
+XTALK_API int xtalk_set_timeout(struct xtalk_base *dev, int new_timeout);
 
 /* low-level */
-int process_command(
-	struct xtalk_device *dev,
-	struct xtalk_command *cmd,
-	struct xtalk_command **reply_ref);
-struct xtalk_command *new_command(
-	const struct xtalk_device *xtalk_dev,
+XTALK_API const char *ack_status_msg(const struct xtalk_protocol *xproto,
+		uint8_t status);
+XTALK_API struct xtalk_command *new_command(
+	const struct xtalk_base *xtalk_base,
 	uint8_t op, uint16_t extra_data);
-void free_command(struct xtalk_command *cmd);
+XTALK_API void free_command(struct xtalk_command *cmd);
 
 /*
  * Convenience macros to define entries in a protocol command table:
  *   p		- signify the dialect prefix (XTALK for base protocol)
  *   o		- signify command op (e.g: ACK)
- *   cb		- A callback function (type xtalk_cmd_callback_t)
  */
-#define	CMD_RECV(p, o, cb)	\
+#define	CMD_RECV(p, o)	\
 	[p ## _ ## o | XTALK_REPLY_MASK] = {		\
 		.op = (p ## _ ## o) | XTALK_REPLY_MASK,	\
 		.name = (#o "_reply"),			\
-		.callback = (cb),			\
 		.len =					\
 			sizeof(struct xtalk_header) +	\
 			sizeof(struct XTALK_STRUCT(p, o)),	\
@@ -158,7 +167,6 @@ void free_command(struct xtalk_command *cmd);
 	[p ## _ ## o] = {		\
 		.op = (p ## _ ## o),	\
 		.name = (#o),		\
-		.callback = NULL,	\
 		.len =					\
 			sizeof(struct xtalk_header) +	\
 			sizeof(struct XTALK_STRUCT(p, o)),	\
@@ -175,4 +183,4 @@ void free_command(struct xtalk_command *cmd);
 }
 #endif /* __cplusplus */
 
-#endif	/* XTALK_H */
+#endif	/* XTALK_PROTO_H */

xpp/xtalk/include/xtalk/proto_raw.h

@@ -0,0 +1,76 @@
+#ifndef	XTALK_PROTO_RAW_H
+#define	XTALK_PROTO_RAW_H
+/*
+ * Written by Oron Peled <oron@actcom.co.il>
+ * Copyright (C) 2009, Xorcom
+ *
+ * All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+ *
+ */
+
+#ifdef __cplusplus
+extern "C"
+{
+#endif /* __cplusplus */
+
+/*
+ * XTALKSYNC - Base synchronous protocol for our USB devices
+ *             It is meant to provide a common base for layered
+ *             protocols (dialects)
+ */
+
+#include <stdint.h>
+#include <stdlib.h>
+#include <xtalk/api_defs.h>
+#include <xtalk/proto.h>
+#include <xtalk/firmware_defs.h>
+
+#ifdef	__GNUC__
+#define	PACKED	__attribute__((packed))
+#else
+#error "We do not know how your compiler packs structures"
+#endif
+
+/*
+ * Base XTALK device. A pointer to this struct
+ * should be included in the struct representing
+ * the dialect.
+ */
+struct xtalk_raw;
+struct xusb;
+
+XTALK_API struct xtalk_raw *xtalk_raw_new(struct xtalk_base *xtalk_base);
+XTALK_API void xtalk_raw_delete(struct xtalk_raw *xraw);
+XTALK_API int xtalk_raw_set_protocol(struct xtalk_raw *xtalk_base,
+		const struct xtalk_protocol *xproto);
+XTALK_API int xtalk_raw_cmd_recv(struct xtalk_raw *xraw,
+	struct xtalk_command **reply_ref);
+XTALK_API int xtalk_raw_cmd_send(struct xtalk_raw *xraw, const char *buf, int len,
+       uint16_t *tx_seq);
+
+/*
+ * These are low-level interfaces that receive/send arbitrary buffers
+ * Be carefull, as that allow to send illegal Xtalk packets
+ */
+XTALK_API int xtalk_raw_buffer_recv(struct xtalk_raw *xraw, char *buf, int len);
+XTALK_API int xtalk_raw_buffer_send(struct xtalk_raw *xraw, const char *buf, int len);
+
+#ifdef __cplusplus
+}
+#endif /* __cplusplus */
+
+#endif	/* XTALK_PROTO_RAW_H */

xpp/xtalk/include/xtalk/proto_sync.h

@@ -0,0 +1,75 @@
+#ifndef	XTALK_PROTO_SYNC_H
+#define	XTALK_PROTO_SYNC_H
+/*
+ * Written by Oron Peled <oron@actcom.co.il>
+ * Copyright (C) 2009, Xorcom
+ *
+ * All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+ *
+ */
+
+#include <xtalk/api_defs.h>
+#include <xtalk/proto.h>
+
+#ifdef __cplusplus
+extern "C"
+{
+#endif /* __cplusplus */
+
+/*
+ * XTALKSYNC - Base synchronous protocol for our USB devices
+ *             It is meant to provide a common base for layered
+ *             protocols (dialects)
+ */
+
+#include <stdint.h>
+#include <stdlib.h>
+#include <xtalk/firmware_defs.h>
+
+#ifdef	__GNUC__
+#define	PACKED	__attribute__((packed))
+#else
+#error "We do not know how your compiler packs structures"
+#endif
+
+/*
+ * Base XTALK device. A pointer to this struct
+ * should be included in the struct representing
+ * the dialect.
+ */
+struct xtalk_sync;
+struct xusb;
+
+/* high-level */
+XTALK_API struct xtalk_sync *xtalk_sync_new(struct xtalk_base *xtalk_base);
+XTALK_API void xtalk_sync_delete(struct xtalk_sync *xtalk_sync);
+XTALK_API int xtalk_sync_set_protocol(struct xtalk_sync *xtalk_base,
+		const struct xtalk_protocol *xproto);
+XTALK_API int xtalk_proto_query(struct xtalk_sync *dev);
+
+/* low-level */
+XTALK_API int process_command(
+	struct xtalk_sync *dev,
+	struct xtalk_command *cmd,
+	struct xtalk_command **reply_ref,
+	uint16_t *sequence_number);
+
+#ifdef __cplusplus
+}
+#endif /* __cplusplus */
+
+#endif	/* XTALK_PROTO_SYNC_H */

xpp/xtalk/include/xtalk/xlist.h

@@ -0,0 +1,32 @@
+#ifndef	XLIST_H
+#define	XLIST_H
+
+#include <xtalk/api_defs.h>
+
+#ifdef __cplusplus
+extern "C"
+{
+#endif /* __cplusplus */
+
+struct xlist_node {
+	void			*data;
+	struct xlist_node	*next;
+	struct xlist_node	*prev;
+};
+
+typedef void (*xlist_destructor_t)(void *data);
+
+XTALK_API struct xlist_node *xlist_new(void *data);
+XTALK_API void xlist_destroy(struct xlist_node *list, xlist_destructor_t destructor);
+XTALK_API void xlist_append_list(struct xlist_node *list1, struct xlist_node *list2);
+XTALK_API void xlist_append_item(struct xlist_node *list, struct xlist_node *item);
+XTALK_API void xlist_remove_item(struct xlist_node *item);
+XTALK_API struct xlist_node *xlist_shift(struct xlist_node *list);
+XTALK_API int xlist_empty(const struct xlist_node *list);
+XTALK_API size_t xlist_length(const struct xlist_node *list);
+
+#ifdef __cplusplus
+}
+#endif /* __cplusplus */
+
+#endif	/* XLIST_H */

xpp/xtalk/include/xtalk/xtalk_iface.h

@@ -0,0 +1,19 @@
+/*
+ * Wrappers for swig/python integration
+ */
+
+struct Command {
+	struct xtalk_command	*command;
+};
+
+struct Xtalksync {
+	struct xtalk_base	*xtalk_base;
+	struct xtalk_sync	*xtalk_sync;
+	struct XusbIface	*py_xusb_iface;
+};
+
+struct Xtalkraw {
+	struct xtalk_base	*xtalk_base;
+	struct xtalk_raw	*xtalk_raw;
+	struct XusbIface	*py_xusb_iface;
+};

xpp/xtalk/include/xtalk/xusb.h

@@ -0,0 +1,115 @@
+#ifndef	XUSB_H
+#define	XUSB_H
+/*
+ * Written by Oron Peled <oron@actcom.co.il>
+ * Copyright (C) 2008, Xorcom
+ *
+ * All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+ *
+ */
+
+#include <stdio.h>
+#include <stdint.h>
+#include <xtalk/api_defs.h>
+#include <xtalk/xlist.h>
+
+#ifdef __cplusplus
+extern "C"
+{
+#endif /* __cplusplus */
+
+/*
+ * Xorcom usb handling
+ */
+
+#define	PACKET_SIZE	512
+
+/*
+ * Specify the wanted device
+ */
+struct xusb_spec {
+	char	*name;	/* For debug/output purpose */
+	/* What we will actually use */
+	uint16_t	vendor_id;
+	uint16_t	product_id;
+};
+
+#define	SPEC_HEAD(vendor_id_, product_id_, name_) \
+	{ \
+		.name = (name_), \
+		.vendor_id = (vendor_id_), \
+		.product_id = (product_id_), \
+	}
+
+XTALK_API void xusb_init_spec(struct xusb_spec *xusb_spec,
+	char *name, uint16_t vendor_id, uint16_t product_id);
+
+struct xusb_device;
+struct xusb_iface;
+
+/*
+ * Prototypes
+ */
+typedef int (*xusb_filter_t)(const struct xusb_device *xusb_device, void *data);
+XTALK_API struct xlist_node *xusb_find_byproduct(const struct xusb_spec *specs,
+		int numspecs, xusb_filter_t filterfunc, void *data);
+XTALK_API struct xusb_device *xusb_find_bypath(const char *path);
+XTALK_API struct xusb_iface *xusb_open_one(const struct xusb_spec *specs, int numspecs,
+		int interface_num,
+		xusb_filter_t filterfunc, void *data);
+
+/*
+ * A convenience filter
+ */
+XTALK_API int xusb_filter_bypath(const struct xusb_device *xusb_device, void *data);
+
+/* Device management */
+XTALK_API const struct xusb_spec *xusb_spec(const struct xusb_device *xusb_device);
+XTALK_API void xusb_destroy(struct xusb_device *xusb_device);
+XTALK_API size_t xusb_packet_size(const struct xusb_device *xusb_device);
+XTALK_API void xusb_showinfo(const struct xusb_device *xusb_device);
+XTALK_API const char *xusb_serial(const struct xusb_device *xusb_device);
+XTALK_API const char *xusb_manufacturer(const struct xusb_device *xusb_device);
+XTALK_API const char *xusb_product(const struct xusb_device *xusb_device);
+XTALK_API uint16_t xusb_bus_num(const struct xusb_device *xusb_device);
+XTALK_API uint16_t xusb_device_num(const struct xusb_device *xusb_device);
+XTALK_API uint16_t xusb_vendor_id(const struct xusb_device *xusb_device);
+XTALK_API uint16_t xusb_product_id(const struct xusb_device *xusb_device);
+XTALK_API const char *xusb_devpath(const struct xusb_device *xusb_device);
+XTALK_API const struct xusb_spec *xusb_device_spec(const struct xusb_device *xusb_device);
+XTALK_API struct xusb_iface *xusb_find_iface(const char *devpath,
+	int iface_num,
+	int ep_out,
+	int ep_in,
+	struct xusb_spec *dummy_spec);
+XTALK_API int xusb_claim(struct xusb_device *xusb_device, unsigned int interface_num,
+	struct xusb_iface **iface);
+XTALK_API void xusb_release(struct xusb_iface *iface);
+XTALK_API int xusb_is_claimed(struct xusb_iface *iface);
+XTALK_API struct xusb_iface *xusb_interface_of(const struct xusb_device *dev, int num);
+XTALK_API struct xusb_device *xusb_deviceof(struct xusb_iface *iface);
+XTALK_API const char *xusb_interface_name(const struct xusb_iface *iface);
+XTALK_API int xusb_interface_num(const struct xusb_iface *iface);
+XTALK_API int xusb_send(struct xusb_iface *iface, const char *buf, int len, int timeout);
+XTALK_API int xusb_recv(struct xusb_iface *iface, char *buf, size_t len, int timeout);
+XTALK_API int xusb_flushread(struct xusb_iface *iface);
+
+#ifdef __cplusplus
+}
+#endif /* __cplusplus */
+
+#endif	/* XUSB_H */

xpp/xtalk/include/xtalk/xusb_iface.h

@@ -0,0 +1,43 @@
+/*
+ * Wrappers for swig/python integration
+ */
+
+#ifdef	SWIG
+%feature("docstring", "Represents the specification of wanted USB device") Spec;
+#endif
+struct Spec {
+#ifdef	SWIG
+	%immutable spec;
+	%immutable ref_count;
+#endif
+	struct xusb_spec	*spec;
+	int			ref_count;
+};
+
+#ifdef	SWIG
+%feature("docstring", "Represents a single USB device") XusbDev;
+#endif
+struct XusbDev {
+#ifdef	SWIG
+	%immutable spec;
+	%immutable xusb_device;
+	%immutable ref_count;
+#endif
+	struct Spec		*spec_wrapper;
+	struct xusb_device	*xusb_device;
+	int			ref_count;
+};
+
+#ifdef	SWIG
+%feature("docstring", "Represents a single USB interface") XusbIface;
+#endif
+struct XusbIface {
+#ifdef	SWIG
+	%immutable dev_wrapper;
+	%immutable iface;
+#endif
+	struct XusbDev		*dev_wrapper;	/* for ref-counting */
+	struct xusb_iface	*iface;
+};
+
+

xpp/xtalk/xlist.c

@@ -1,7 +1,8 @@
 #include <assert.h>
 #include <stdlib.h>
 #include <string.h>
-#include <xlist.h>
+#include <xtalk/xlist.h>
+#include <autoconfig.h>
 
 struct xlist_node *xlist_new(void *data)
 {
@@ -36,6 +37,17 @@ void xlist_destroy(struct xlist_node *list, xlist_destructor_t destructor)
 	free(list);
 }
 
+void xlist_append_list(struct xlist_node *list1, struct xlist_node *list2)
+{
+	struct xlist_node *curr;
+
+	assert(list1);
+	assert(list2);
+
+	while ((curr = xlist_shift(list2)) != NULL)
+		xlist_append_item(list1, curr);
+}
+
 void xlist_append_item(struct xlist_node *list, struct xlist_node *item)
 {
 	assert(list);

xpp/xtalk/xlist_test.c

@@ -0,0 +1,73 @@
+#include <assert.h>
+#include <stdio.h>
+#include <xtalk/xlist.h>
+#include <autoconfig.h>
+
+void dump_list(const struct xlist_node *list)
+{
+	struct xlist_node *curr;
+	const char *p;
+	int len;
+
+	len = xlist_length(list);
+	p = list->data;
+	printf("dumping list: %s[%d]\n", p, len);
+	for (curr = list->next; curr != list; curr = curr->next) {
+		p = curr->data;
+		printf("> %s\n", p);
+	}
+}
+
+void string_destructor(void *data)
+{
+	const char	*p = data;
+
+	printf("destroy: '%s'\n", p);
+}
+
+int main()
+{
+	struct xlist_node	*list1;
+	struct xlist_node	*list2;
+	struct xlist_node	*list3;
+	struct xlist_node	*item1;
+	struct xlist_node	*item2;
+	struct xlist_node	*item3;
+
+	list1 = xlist_new("list1");
+	list2 = xlist_new("list2");
+	list3 = xlist_new("list3");
+	item1 = xlist_new("item1");
+	item2 = xlist_new("item2");
+	item3 = xlist_new("item3");
+	assert(xlist_empty(list1));
+	assert(xlist_empty(list2));
+	assert(xlist_empty(list3));
+	assert(xlist_empty(item1));
+	assert(xlist_empty(item2));
+	assert(xlist_empty(item3));
+	dump_list(list1);
+	dump_list(list2);
+	xlist_append_item(list1, item1);
+	assert(!xlist_empty(list1));
+	xlist_append_item(list1, item2);
+	xlist_append_item(list1, item3);
+	dump_list(list1);
+	xlist_remove_item(item2);
+	assert(!xlist_empty(list1));
+	xlist_append_item(list2, item2);
+	assert(!xlist_empty(list2));
+	dump_list(list1);
+	dump_list(list2);
+	xlist_shift(list1);
+	dump_list(list1);
+	xlist_append_list(list1, list2);
+	dump_list(list1);
+	xlist_append_item(list3, item1);
+	xlist_append_list(list1, list3);
+	dump_list(list1);
+	xlist_destroy(list1, string_destructor);
+	xlist_destroy(list2, string_destructor);
+	xlist_destroy(list3, string_destructor);
+	return 0;
+}

xpp/xtalk/xtalk-xusb.c

@@ -0,0 +1,70 @@
+/*
+ * Written by Oron Peled <oron@actcom.co.il>
+ * Copyright (C) 2012, Xorcom
+ *
+ * All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+ *
+ */
+
+/*
+ * Convenience wrappers for xtalk_base over xusb
+ */
+#include <assert.h>
+#include <xtalk/debug.h>
+#include <xtalk/xusb.h>
+#include <autoconfig.h>
+#include "xtalk_base.h"
+
+static inline int close_func(void *priv)
+{
+	struct xusb_iface *iface = (struct xusb_iface *)priv;
+	xusb_release(iface);
+        return 0;
+}
+
+static inline int send_func(void *priv, const char *data, size_t len, int timeout)
+{
+	return xusb_send((struct xusb_iface *)priv, data, len, timeout);
+}
+
+static inline int recv_func(void *priv, char *data, size_t maxlen, int timeout)
+{
+	return xusb_recv((struct xusb_iface *)priv, data, maxlen, timeout);
+}
+
+
+static struct xtalk_ops	xtalk_ops = {
+	.send_func	= send_func,
+	.recv_func	= recv_func,
+	.close_func	= close_func,
+};
+
+struct xtalk_base *xtalk_base_new_on_xusb(struct xusb_iface *xusb_iface)
+{
+	struct xtalk_base	*xtalk_base;
+	int packet_size;
+
+	assert(xusb_iface);
+	packet_size = xusb_packet_size(xusb_deviceof(xusb_iface));
+
+	xtalk_base = xtalk_base_new(&xtalk_ops, packet_size, xusb_iface);
+	if (!xtalk_base) {
+		ERR("Failed creating the xtalk device abstraction\n");
+		return NULL;
+	}
+	return xtalk_base;
+}

xpp/xtalk/xtalk.c

@@ -1,497 +0,0 @@
-/*
- * Written by Oron Peled <oron@actcom.co.il>
- * Copyright (C) 2009, Xorcom
- *
- * All rights reserved.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
- *
- */
-
-#include <stdio.h>
-#include <stdlib.h>
-#include <string.h>
-#include <assert.h>
-#include <errno.h>
-#include <arpa/inet.h>
-#include <xtalk.h>
-#include <debug.h>
-
-#define	DBG_MASK	0x02
-
-#define	TIMEOUT		6000
-
-/*
- * Base XTALK device. A pointer to this struct
- * should be included in the struct representing
- * the dialect.
- */
-struct xtalk_device {
-	void			*transport_priv;	/* e.g: struct xusb */
-	struct xtalk_ops	ops;
-	struct xtalk_protocol	xproto;
-	uint8_t			xtalk_proto_version;
-	uint8_t                 status;
-	size_t			packet_size;
-	uint16_t                tx_sequenceno;
-};
-
-CMD_DEF(XTALK, ACK,
-	uint8_t stat;
-	);
-
-CMD_DEF(XTALK, PROTO_GET,
-	uint8_t proto_version;
-	uint8_t reserved;
-	);
-
-CMD_DEF(XTALK, PROTO_GET_REPLY,
-	uint8_t proto_version;
-	uint8_t reserved;
-	);
-
-union XTALK_PDATA(XTALK) {
-	MEMBER(XTALK, ACK);
-	MEMBER(XTALK, PROTO_GET);
-	MEMBER(XTALK, PROTO_GET_REPLY);
-} PACKED members;
-
-struct xtalk_protocol	xtalk_base = {
-	.name	= "XTALK",
-	.proto_version = 0,
-	.commands = {
-		CMD_RECV(XTALK, ACK, NULL),
-		CMD_SEND(XTALK, PROTO_GET),
-		CMD_RECV(XTALK, PROTO_GET_REPLY, NULL),
-	},
-	.ack_statuses = {
-		ACK_STAT(OK, "Acknowledges previous command"),
-		ACK_STAT(FAIL, "Last command failed"),
-		ACK_STAT(RESET_FAIL, "reset failed"),
-		ACK_STAT(NODEST, "No destination is selected"),
-		ACK_STAT(MISMATCH, "Data mismatch"),
-		ACK_STAT(NOACCESS, "No access"),
-		ACK_STAT(BAD_CMD, "Bad command"),
-		ACK_STAT(TOO_SHORT, "Packet is too short"),
-		ACK_STAT(ERROFFS, "Offset error (not used)"),
-		ACK_STAT(NO_LEEPROM, "Large EEPROM was not found"),
-		ACK_STAT(NO_EEPROM, "No EEPROM was found"),
-		ACK_STAT(WRITE_FAIL, "Writing to device failed"),
-		ACK_STAT(NOPWR_ERR, "No power on USB connector"),
-	}
-};
-
-void free_command(struct xtalk_command *cmd)
-{
-	if (!cmd)
-		return;
-	memset(cmd, 0, cmd->header.len);
-	free(cmd);
-}
-
-static const struct xtalk_command_desc *get_command_desc(
-		const struct xtalk_protocol *xproto, uint8_t op)
-{
-	const struct xtalk_command_desc	*desc;
-
-	if (!xproto)
-		return NULL;
-	desc = &xproto->commands[op];
-	if (!desc->name)
-		return NULL;
-#if 0
-	DBG("%s version=%d, op=0x%X (%s)\n",
-		xproto->name, xproto->proto_version,
-		op, desc->name);
-#endif
-	return desc;
-}
-
-static const char *ack_status_msg(const struct xtalk_protocol *xproto,
-		uint8_t status)
-{
-	const char	*ack_status;
-
-	if (!xproto)
-		return NULL;
-	ack_status = xproto->ack_statuses[status];
-	DBG("%s status=0x%X (%s)\n", xproto->name, status, ack_status);
-	return ack_status;
-}
-
-int xtalk_set_protocol(struct xtalk_device *xtalk_dev,
-		const struct xtalk_protocol *xproto)
-{
-	const char	*protoname = (xproto) ? xproto->name : "GLOBAL";
-	int		i;
-
-	DBG("%s\n", protoname);
-	memset(&xtalk_dev->xproto, 0, sizeof(xtalk_dev->xproto));
-	for (i = 0; i < MAX_OPS; i++) {
-		const struct xtalk_command_desc	*desc;
-
-		desc = get_command_desc(xproto, i);
-		if (desc) {
-			if (!IS_PRIVATE_OP(i)) {
-				ERR("Bad op=0x%X "
-					"(should be in the range [0x%X-0x%X]\n",
-					i, PRIVATE_OP_FIRST, PRIVATE_OP_LAST);
-				return -EINVAL;
-			}
-			xtalk_dev->xproto.commands[i] = *desc;
-			DBG("private: op=0x%X (%s)\n", i, desc->name);
-		} else {
-			if (!IS_PRIVATE_OP(i)) {
-				const char	*name;
-
-				xtalk_dev->xproto.commands[i] =
-					xtalk_base.commands[i];
-				name = xtalk_dev->xproto.commands[i].name;
-				if (name)
-					DBG("global: op=0x%X (%s)\n", i, name);
-			}
-		}
-	}
-	for (i = 0; i < MAX_STATUS; i++) {
-		const char	*stat_msg;
-
-		stat_msg = (xproto) ? xproto->ack_statuses[i] : NULL;
-		if (stat_msg) {
-			if (!IS_PRIVATE_OP(i)) {
-				ERR("Bad status=0x%X "
-					"(should be in the range [0x%X-0x%X]\n",
-					i, PRIVATE_OP_FIRST, PRIVATE_OP_LAST);
-				return -EINVAL;
-			}
-			xtalk_dev->xproto.ack_statuses[i] = stat_msg;
-			DBG("private: status=0x%X (%s)\n", i, stat_msg);
-		} else {
-			if (!IS_PRIVATE_OP(i)) {
-				const char	*stat_msg;
-
-				xtalk_dev->xproto.ack_statuses[i] =
-					xtalk_base.ack_statuses[i];
-				stat_msg = xtalk_dev->xproto.ack_statuses[i];
-				if (stat_msg)
-					DBG("global: status=0x%X (%s)\n",
-						i, stat_msg);
-			}
-		}
-	}
-	xtalk_dev->xproto.name = protoname;
-	xtalk_dev->xproto.proto_version = (xproto) ? xproto->proto_version : 0;
-	return 0;
-}
-
-struct xtalk_command *new_command(
-	const struct xtalk_device *xtalk_dev,
-	uint8_t op, uint16_t extra_data)
-{
-	const struct xtalk_protocol	*xproto;
-	struct xtalk_command		*cmd;
-	const struct xtalk_command_desc	*desc;
-	uint16_t			len;
-
-	xproto = &xtalk_dev->xproto;
-	desc = get_command_desc(xproto, op);
-	if (!desc) {
-		ERR("Unknown op=0x%X.\n", op);
-		return NULL;
-	}
-	DBG("OP=0x%X [%s] (extra_data %d)\n", op, desc->name, extra_data);
-	len = desc->len + extra_data;
-	cmd = malloc(len);
-	if (!cmd) {
-		ERR("Out of memory\n");
-		return NULL;
-	}
-	if (extra_data) {
-		uint8_t	*ptr = (uint8_t *)cmd;
-
-		DBG("clear extra_data (%d bytes)\n", extra_data);
-		memset(ptr + desc->len, 0, extra_data);
-	}
-	cmd->header.op = op;
-	cmd->header.len = len;
-	cmd->header.seq = 0;	/* Overwritten in send_usb() */
-	return cmd;
-}
-
-void xtalk_dump_command(struct xtalk_command *cmd)
-{
-	uint16_t	len;
-	int		i;
-
-	len = cmd->header.len;
-	if (len < sizeof(struct xtalk_header)) {
-		ERR("Command too short (%d)\n", len);
-		return;
-	}
-	INFO("DUMP: OP=0x%X len=%d seq=%d\n",
-		cmd->header.op, cmd->header.len, cmd->header.seq);
-	for (i = 0; i < len - sizeof(struct xtalk_header); i++)
-		INFO("  %2d. 0x%X\n", i, cmd->alt.raw_data[i]);
-}
-
-static int send_command(struct xtalk_device *xtalk_dev,
-		struct xtalk_command *cmd, int timeout)
-{
-	int		ret;
-	int		len;
-	void		*priv = xtalk_dev->transport_priv;
-
-	len = cmd->header.len;
-	cmd->header.seq = xtalk_dev->tx_sequenceno;
-
-	ret = xtalk_dev->ops.send_func(priv, (char *)cmd, len, timeout);
-	if (ret < 0)
-		DBG("send_func failed ret=%d\n", ret);
-	xtalk_dev->tx_sequenceno++;
-	return ret;
-}
-
-static struct xtalk_command *recv_command(struct xtalk_device *xtalk_dev,
-		int timeout)
-{
-	struct xtalk_command	*reply;
-	void			*priv = xtalk_dev->transport_priv;
-	size_t			psize = xtalk_dev->packet_size;
-	int			ret;
-
-	reply = malloc(psize);
-	if (!reply) {
-		ERR("Out of memory\n");
-		goto err;
-	}
-	reply->header.len = 0;
-	ret = xtalk_dev->ops.recv_func(priv, (char *)reply, psize, timeout);
-	if (ret < 0) {
-		ERR("Receive from usb failed.\n");
-		goto err;
-	} else if (ret == 0) {
-		goto err;	/* No reply */
-	}
-	if (ret != reply->header.len) {
-		ERR("Wrong length received: got %d bytes, "
-			"but length field says %d bytes%s\n",
-			ret, reply->header.len,
-			(ret == 1) ? ". Old USB firmware?" : "");
-		goto err;
-	}
-	/* dump_packet(LOG_DEBUG, DBG_MASK, __func__, (char *)reply, ret); */
-	return reply;
-err:
-	if (reply) {
-		memset(reply, 0, psize);
-		free_command(reply);
-	}
-	return NULL;
-}
-
-
-__attribute__((warn_unused_result))
-int process_command(
-	struct xtalk_device *xtalk_dev,
-	struct xtalk_command *cmd,
-	struct xtalk_command **reply_ref)
-{
-	const struct xtalk_protocol	*xproto;
-	struct xtalk_command		*reply = NULL;
-	const struct xtalk_command_desc	*reply_desc;
-	const struct xtalk_command_desc	*expected;
-	const struct xtalk_command_desc	*cmd_desc;
-	uint8_t				reply_op;
-	const char			*protoname;
-	int				ret;
-
-	xproto = &xtalk_dev->xproto;
-	protoname = (xproto) ? xproto->name : "GLOBAL";
-	/* So the caller knows if a reply was received */
-	if (reply_ref)
-		*reply_ref = NULL;
-	reply_op = cmd->header.op | XTALK_REPLY_MASK;
-	cmd_desc = get_command_desc(xproto, cmd->header.op);
-	expected = get_command_desc(xproto, reply_op);
-	ret = send_command(xtalk_dev, cmd, TIMEOUT);
-	if (!reply_ref) {
-		DBG("No reply requested\n");
-		goto out;
-	}
-	if (ret < 0) {
-		ERR("send_command failed: %d\n", ret);
-		goto out;
-	}
-	reply = recv_command(xtalk_dev, TIMEOUT);
-	if (!reply) {
-		ERR("recv_command failed\n");
-		ret = -EPROTO;
-		goto out;
-	}
-	*reply_ref = reply;
-	if ((reply->header.op & 0x80) != 0x80) {
-		ERR("Unexpected reply op=0x%02X, should have MSB set.\n",
-			reply->header.op);
-		ret = -EPROTO;
-		goto out;
-	}
-	DBG("REPLY OP: 0x%X\n", reply->header.op);
-	reply_desc = get_command_desc(xproto, reply->header.op);
-	if (!reply_desc) {
-		ERR("Unknown reply (proto=%s) op=0x%02X\n",
-			protoname, reply->header.op);
-		ret = -EPROTO;
-		goto out;
-	}
-	DBG("REPLY NAME: %s\n", reply_desc->name);
-	if (reply->header.op == XTALK_ACK) {
-		int	status = CMD_FIELD(reply, XTALK, ACK, stat);
-
-		if (expected) {
-			ERR("Expected OP=0x%02X: Got ACK(%d): %s\n",
-				reply_op,
-				status,
-				ack_status_msg(xproto, status));
-			ret = -EPROTO;
-			goto out;
-		} else if (status != STAT_OK) {
-
-			ERR("Got ACK (for OP=0x%X [%s]): %d %s\n",
-				cmd->header.op,
-				cmd_desc->name,
-				status, ack_status_msg(xproto, status));
-			ret = -EPROTO;
-			goto out;
-		}
-		/* Good expected ACK ... */
-	} else if (reply->header.op != reply_op) {
-			ERR("Expected OP=0x%02X: Got OP=0x%02X\n",
-				reply_op, reply->header.op);
-			ret = -EPROTO;
-			goto out;
-	}
-	if (expected && expected->len > reply->header.len) {
-			ERR("Expected len=%d: Got len=%d\n",
-				expected->len, reply->header.len);
-			ret = -EPROTO;
-			goto out;
-	}
-	if (cmd->header.seq != reply->header.seq) {
-			ERR("Expected seq=%d: Got seq=%d\n",
-				cmd->header.seq, reply->header.seq);
-			ret = -EPROTO;
-			goto out;
-	}
-	ret = reply->header.len;	/* All good, return the length */
-	DBG("returning reply op 0x%X (%d bytes)\n", reply->header.op, ret);
-out:
-	free_command(cmd);
-	if (!reply_ref && reply)
-		free_command(reply);
-	return ret;
-}
-
-/*
- * Protocol Commands
- */
-
-int xtalk_proto_query(struct xtalk_device *xtalk_dev)
-{
-	struct xtalk_command		*cmd;
-	struct xtalk_command		*reply;
-	uint8_t				proto_version;
-	int				ret;
-
-	DBG("\n");
-	assert(xtalk_dev != NULL);
-	proto_version = xtalk_dev->xproto.proto_version;
-	cmd = new_command(xtalk_dev, XTALK_PROTO_GET, 0);
-	if (!cmd) {
-		ERR("new_command failed\n");
-		return -ENOMEM;
-	}
-	/* Protocol Version */
-	CMD_FIELD(cmd, XTALK, PROTO_GET, proto_version) = proto_version;
-	ret = process_command(xtalk_dev, cmd, &reply);
-	if (ret < 0) {
-		ERR("process_command failed: %d\n", ret);
-		goto out;
-	}
-	xtalk_dev->xtalk_proto_version =
-		CMD_FIELD(reply, XTALK, PROTO_GET_REPLY, proto_version);
-	if (xtalk_dev->xtalk_proto_version != proto_version) {
-		DBG("Got %s protocol version: 0x%02x (expected 0x%02x)\n",
-			xtalk_dev->xproto.name,
-			xtalk_dev->xtalk_proto_version,
-			proto_version);
-		ret = xtalk_dev->xtalk_proto_version;
-		goto out;
-	}
-	DBG("Protocol version: %02x\n", xtalk_dev->xtalk_proto_version);
-	ret = xtalk_dev->xtalk_proto_version;
-out:
-	free_command(reply);
-	return ret;
-}
-
-/*
- * Wrappers
- */
-
-struct xtalk_device *xtalk_new(const struct xtalk_ops *ops,
-	size_t packet_size, void *priv)
-{
-	struct xtalk_device	*xtalk_dev;
-	int			ret;
-
-	DBG("\n");
-	assert(ops != NULL);
-	xtalk_dev = malloc(sizeof(*xtalk_dev));
-	if (!xtalk_dev) {
-		ERR("Allocating XTALK device memory failed\n");
-		return NULL;
-	}
-	memset(xtalk_dev, 0, sizeof(*xtalk_dev));
-	memcpy((void *)&xtalk_dev->ops, (const void *)ops,
-		sizeof(xtalk_dev->ops));
-	xtalk_dev->transport_priv = priv;
-	xtalk_dev->packet_size = packet_size;
-	xtalk_dev->tx_sequenceno = 1;
-	ret = xtalk_set_protocol(xtalk_dev, NULL);
-	if (ret < 0) {
-		ERR("GLOBAL Protocol registration failed: %d\n", ret);
-		goto err;
-	}
-	return xtalk_dev;
-
-err:
-	if (xtalk_dev)
-		xtalk_delete(xtalk_dev);
-	return NULL;
-}
-
-void xtalk_delete(struct xtalk_device *xtalk_dev)
-{
-	void	*priv;
-
-	if (!xtalk_dev)
-		return;
-	DBG("\n");
-	priv = xtalk_dev->transport_priv;
-	assert(priv);
-	xtalk_dev->tx_sequenceno = 0;
-	assert(&xtalk_dev->ops != NULL);
-	assert(&xtalk_dev->ops.close_func != NULL);
-	xtalk_dev->ops.close_func(priv);
-}

xpp/xtalk/xtalk_base.c

@@ -0,0 +1,350 @@
+/*
+ * Written by Oron Peled <oron@actcom.co.il>
+ * Copyright (C) 2009, Xorcom
+ *
+ * All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+ *
+ */
+
+#include <stdio.h>
+#include <stdlib.h>
+#include <string.h>
+#include <assert.h>
+#include <errno.h>
+#include <arpa/inet.h>
+#include <xtalk/debug.h>
+#include <autoconfig.h>
+#include "xtalk_base.h"
+
+#define	DBG_MASK	0x02
+
+void free_command(struct xtalk_command *cmd)
+{
+	if (!cmd)
+		return;
+	memset(cmd, 0, cmd->header.len);
+	free(cmd);
+}
+
+const struct xtalk_command_desc *get_command_desc(
+		const struct xtalk_protocol *xproto, uint8_t op)
+{
+	const struct xtalk_command_desc	*desc;
+
+	if (!xproto)
+		return NULL;
+	desc = &xproto->commands[op];
+	if (!desc->name)
+		return NULL;
+#if 0
+	DBG("%s version=%d, op=0x%X (%s)\n",
+		xproto->name, xproto->proto_version,
+		op, desc->name);
+#endif
+	return desc;
+}
+
+const char *ack_status_msg(const struct xtalk_protocol *xproto,
+		uint8_t status)
+{
+	const char	*ack_status;
+
+	if (!xproto)
+		return NULL;
+	ack_status = xproto->ack_statuses[status];
+	DBG("%s status=0x%X (%s)\n", xproto->name, status, ack_status);
+	return ack_status;
+}
+
+const char *xtalk_protocol_name(const struct xtalk_base *xtalk_base)
+{
+	const struct xtalk_protocol	*xproto;
+
+	xproto = &xtalk_base->xproto;
+        return (xproto) ? xproto->name : "";
+}
+
+int xtalk_set_protocol(struct xtalk_base *xtalk_base,
+		const struct xtalk_protocol *xproto_base,
+		const struct xtalk_protocol *xproto)
+{
+	const char	*protoname = (xproto) ? xproto->name : "GLOBAL";
+	int		i;
+
+	DBG("%s\n", protoname);
+	memset(&xtalk_base->xproto, 0, sizeof(xtalk_base->xproto));
+	for (i = 0; i < MAX_OPS; i++) {
+		const struct xtalk_command_desc	*desc;
+
+		desc = get_command_desc(xproto, i);
+		if (desc) {
+			if (!IS_PRIVATE_OP(i)) {
+				ERR("Bad op=0x%X "
+					"(should be in the range [0x%X-0x%X]\n",
+					i, PRIVATE_OP_FIRST, PRIVATE_OP_LAST);
+				return -EINVAL;
+			}
+			xtalk_base->xproto.commands[i] = *desc;
+			DBG("private: op=0x%X (%s)\n", i, desc->name);
+		} else {
+			if (!IS_PRIVATE_OP(i)) {
+				const char	*name;
+
+				xtalk_base->xproto.commands[i] =
+					xproto_base->commands[i];
+				name = xtalk_base->xproto.commands[i].name;
+				if (name)
+					DBG("global: op=0x%X (%s)\n", i, name);
+			}
+		}
+	}
+	for (i = 0; i < MAX_STATUS; i++) {
+		const char	*stat_msg;
+
+		stat_msg = (xproto) ? xproto->ack_statuses[i] : NULL;
+		if (stat_msg) {
+			xtalk_base->xproto.ack_statuses[i] = stat_msg;
+			DBG("private: status=0x%X (%s)\n", i, stat_msg);
+		} else {
+			const char	*global_msg;
+
+			xtalk_base->xproto.ack_statuses[i] =
+				xproto_base->ack_statuses[i];
+			global_msg = xtalk_base->xproto.ack_statuses[i];
+			if (global_msg)
+				DBG("global: status=0x%X (%s)\n",
+						i, global_msg);
+		}
+	}
+	xtalk_base->xproto.name = protoname;
+	xtalk_base->xproto.proto_version = (xproto) ? xproto->proto_version : 0;
+	return 0;
+}
+
+int xtalk_cmd_callback(struct xtalk_base *xtalk_base, int op,
+	xtalk_cmd_callback_t callback,
+	xtalk_cmd_callback_t *old_callback)
+{
+	const struct xtalk_protocol	*xproto;
+	const struct xtalk_command_desc	*desc;
+
+	xproto = &xtalk_base->xproto;
+	desc = get_command_desc(xproto, op);
+	if (!desc)
+		DBG("Unknown op=0x%X.\n", op);
+	if (old_callback)
+		*old_callback = xtalk_base->callbacks[op];
+	if (callback) {
+		xtalk_base->callbacks[op] = callback;
+		DBG("OP=0x%X [%s] -- set callback to %p\n",
+			op,
+			(desc) ? desc->name : "",
+			callback);
+	}
+	return 0;
+}
+
+struct xtalk_command *new_command(
+	const struct xtalk_base *xtalk_base,
+	uint8_t op, uint16_t extra_data)
+{
+	const struct xtalk_protocol	*xproto;
+	struct xtalk_command		*cmd;
+	const struct xtalk_command_desc	*desc;
+	uint16_t			len;
+
+	xproto = &xtalk_base->xproto;
+	desc = get_command_desc(xproto, op);
+	if (!desc) {
+		ERR("Unknown op=0x%X.\n", op);
+		return NULL;
+	}
+	DBG("OP=0x%X [%s] (extra_data %d)\n", op, desc->name, extra_data);
+	len = desc->len + extra_data;
+	cmd = malloc(len);
+	if (!cmd) {
+		ERR("Out of memory\n");
+		return NULL;
+	}
+	if (extra_data) {
+		uint8_t	*ptr = (uint8_t *)cmd;
+
+		DBG("clear extra_data (%d bytes)\n", extra_data);
+		memset(ptr + desc->len, 0, extra_data);
+	}
+	cmd->header.op = op;
+	cmd->header.len = len;
+	cmd->header.seq = 0;	/* Overwritten in send_usb() */
+	return cmd;
+}
+
+void xtalk_dump_command(struct xtalk_command *cmd)
+{
+	uint16_t	len;
+	int		i;
+
+	len = cmd->header.len;
+	if (len < sizeof(struct xtalk_header)) {
+		ERR("Command too short (%d)\n", len);
+		return;
+	}
+	INFO("DUMP: OP=0x%X len=%d seq=%d\n",
+		cmd->header.op, cmd->header.len, cmd->header.seq);
+	for (i = 0; i < len - sizeof(struct xtalk_header); i++)
+		INFO("  %2d. 0x%X\n", i, cmd->alt.raw_data[i]);
+}
+
+int xtalk_set_timeout(struct xtalk_base *dev, int new_timeout)
+{
+	int old_timeout = dev->default_timeout;
+	dev->default_timeout = new_timeout;
+	return old_timeout;
+}
+
+int send_buffer(struct xtalk_base *xtalk_base, const char *buf, int len)
+{
+	int		ret;
+	void		*priv = xtalk_base->transport_priv;
+	int		timeout = xtalk_base->default_timeout;
+
+	ret = xtalk_base->ops.send_func(priv, buf, len, timeout);
+	if (ret < 0)
+		DBG("%s: failed ret=%d\n", __func__, ret);
+	return ret;
+}
+
+int recv_buffer(struct xtalk_base *xtalk_base, char *buf, int len)
+{
+	void			*priv = xtalk_base->transport_priv;
+	int			timeout = xtalk_base->default_timeout;
+	int			ret;
+
+	ret = xtalk_base->ops.recv_func(priv, buf, len, timeout);
+	if (ret < 0) {
+		DBG("Receive from usb failed (ret=%d)\n", ret);
+		goto out;
+	} else if (ret == 0) {
+		DBG("No reply\n");
+		goto out;	/* No reply */
+	}
+        DBG("Received %d bytes\n", ret);
+out:
+	return ret;
+}
+
+int send_command(struct xtalk_base *xtalk_base,
+		struct xtalk_command *cmd, uint16_t *tx_seq)
+{
+	int		ret;
+	int		len;
+
+	len = cmd->header.len;
+	cmd->header.seq = xtalk_base->tx_sequenceno;
+	ret = send_buffer(xtalk_base, (const char *)cmd, len);
+	if (ret < 0)
+		DBG("%s: failed ret=%d\n", __func__, ret);
+	else if (tx_seq)
+		*tx_seq = xtalk_base->tx_sequenceno++;
+	return ret;
+}
+
+int recv_command(struct xtalk_base *xtalk_base,
+		struct xtalk_command **reply_ref)
+{
+	struct xtalk_command	*reply;
+	size_t			psize = xtalk_base->packet_size;
+	int			ret;
+
+	reply = malloc(psize);
+	if (!reply) {
+		ERR("Out of memory\n");
+		ret = -ENOMEM;
+		goto err;
+	}
+	reply->header.len = 0;
+	ret = recv_buffer(xtalk_base, (char *)reply, psize);
+	if (ret < 0) {
+		DBG("%s: calling recv_buffer() failed (ret=%d)\n", __func__, ret);
+		goto err;
+	} else if (ret == 0) {
+		goto err;	/* No reply */
+	}
+	if (ret != reply->header.len) {
+		ERR("Wrong length received: got %d bytes, "
+			"but length field says %d bytes%s\n",
+			ret, reply->header.len,
+			(ret == 1) ? ". Old USB firmware?" : "");
+		goto err;
+	}
+	/* dump_packet(LOG_DEBUG, DBG_MASK, __func__, (char *)reply, ret); */
+	*reply_ref = reply;
+	return ret;
+err:
+	if (reply) {
+		memset(reply, 0, psize);
+		free_command(reply);
+		*reply_ref = NULL;
+	}
+	return ret;
+}
+
+/*
+ * Wrappers
+ */
+
+struct xtalk_base *xtalk_base_new(const struct xtalk_ops *ops,
+	size_t packet_size, void *priv)
+{
+	struct xtalk_base *xtalk_base;
+
+	DBG("\n");
+	assert(ops != NULL);
+	xtalk_base = calloc(1, sizeof(*xtalk_base));
+	if (!xtalk_base) {
+		ERR("Allocating XTALK device memory failed\n");
+		return NULL;
+	}
+	memcpy((void *)&xtalk_base->ops, (const void *)ops,
+		sizeof(xtalk_base->ops));
+	xtalk_base->packet_size = packet_size;
+	xtalk_base->transport_priv = priv;
+	xtalk_base->tx_sequenceno = 1;
+	xtalk_base->default_timeout = 2000;	/* millies */
+	return xtalk_base;
+}
+
+void xtalk_base_delete(struct xtalk_base *xtalk_base)
+{
+	void	*priv;
+
+	if (!xtalk_base)
+		return;
+	DBG("\n");
+	priv = xtalk_base->transport_priv;
+	assert(priv);
+	xtalk_base->tx_sequenceno = 0;
+	assert(&xtalk_base->ops != NULL);
+	assert(&xtalk_base->ops.close_func != NULL);
+	xtalk_base->ops.close_func(priv);
+	memset(xtalk_base, 0, sizeof(*xtalk_base));
+	free(xtalk_base);
+}
+
+struct xusb_iface *xusb_iface_of_xtalk_base(const struct xtalk_base *xtalk_base)
+{
+	return xtalk_base->transport_priv;
+}

xpp/xtalk/xtalk_base.h

@@ -0,0 +1,73 @@
+#ifndef	XTALK_BASE_H
+#define	XTALK_BASE_H
+/*
+ * Written by Oron Peled <oron@actcom.co.il>
+ * Copyright (C) 2009, Xorcom
+ *
+ * All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+ *
+ */
+
+#include <stdint.h>
+#include <stdlib.h>
+#include <xtalk/proto.h>
+#include <xtalk/firmware_defs.h>
+
+#ifdef __cplusplus
+extern "C"
+{
+#endif /* __cplusplus */
+
+/*
+ * Base XTALK device. A pointer to this struct
+ * should be included in the struct representing
+ * the dialect.
+ */
+struct xtalk_base {
+	void			*transport_priv;	/* e.g: struct xusb */
+	struct xtalk_ops	ops;
+	struct xtalk_protocol	xproto;
+	xtalk_cmd_callback_t	callbacks[MAX_OPS];
+	uint8_t			xtalk_proto_version;
+	uint8_t                 status;
+	size_t			packet_size;
+	uint16_t                tx_sequenceno;
+	int			default_timeout;	/* in millies */
+};
+
+int xtalk_set_protocol(struct xtalk_base *xtalk_base,
+		const struct xtalk_protocol *xproto_base,
+		const struct xtalk_protocol *xproto);
+const struct xtalk_command_desc *get_command_desc(
+		const struct xtalk_protocol *xproto, uint8_t op);
+int send_command(struct xtalk_base *xtalk_base,
+		struct xtalk_command *cmd, uint16_t *tx_seq);
+int recv_command(struct xtalk_base *xtalk_base,
+		struct xtalk_command **reply_ref);
+
+/*
+ * These are low-level interfaces that receive/send arbitrary buffers
+ * Be carefull, as that allow to send illegal Xtalk packets
+ */
+int send_buffer(struct xtalk_base *xtalk_base, const char *buf, int len);
+int recv_buffer(struct xtalk_base *xtalk_base, char *buf, int len);
+
+#ifdef __cplusplus
+}
+#endif /* __cplusplus */
+
+#endif	/* XTALK_BASE_H */

xpp/xtalk/xtalk_raw.c

@@ -0,0 +1,221 @@
+/*
+ * Written by Oron Peled <oron@actcom.co.il>
+ * Copyright (C) 2009, Xorcom
+ *
+ * All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+ *
+ */
+
+#include <stdio.h>
+#include <stdlib.h>
+#include <string.h>
+#include <assert.h>
+#include <errno.h>
+#include <arpa/inet.h>
+#include <xtalk/debug.h>
+#include <xtalk/proto_raw.h>
+#include <autoconfig.h>
+#include "xtalk_base.h"
+
+#define	DBG_MASK	0x02
+
+/*
+ * Base XTALK device. A pointer to this struct
+ * should be included in the struct representing
+ * the dialect.
+ */
+struct xtalk_raw {
+	struct xtalk_base	*xtalk_base;
+};
+
+CMD_DEF(XTALK, ACK,
+	uint8_t stat;
+	);
+
+union XTALK_PDATA(XTALK) {
+	MEMBER(XTALK, ACK);
+} PACKED members;
+
+const struct xtalk_protocol	xtalk_raw_proto = {
+	.name	= "XTALK-RAW",
+	.proto_version = 0,
+	.commands = {
+		CMD_RECV(XTALK, ACK),
+	},
+	.ack_statuses = {
+		ACK_STAT(OK, "Acknowledges previous command"),
+		ACK_STAT(FAIL, "Last command failed"),
+		ACK_STAT(RESET_FAIL, "reset failed"),
+		ACK_STAT(NODEST, "No destination is selected"),
+		ACK_STAT(MISMATCH, "Data mismatch"),
+		ACK_STAT(NOACCESS, "No access"),
+		ACK_STAT(BAD_CMD, "Bad command"),
+		ACK_STAT(TOO_SHORT, "Packet is too short"),
+		ACK_STAT(ERROFFS, "Offset error (not used)"),
+		ACK_STAT(NO_LEEPROM, "Large EEPROM was not found"),
+		ACK_STAT(NO_EEPROM, "No EEPROM was found"),
+		ACK_STAT(WRITE_FAIL, "Writing to device failed"),
+		ACK_STAT(NOPWR_ERR, "No power on USB connector"),
+	}
+};
+
+struct xtalk_raw *xtalk_raw_new(struct xtalk_base *xtalk_base)
+{
+	struct xtalk_raw *xtalk_raw;
+	int ret;
+
+	assert(xtalk_base);
+	xtalk_raw = calloc(1, sizeof(*xtalk_raw));
+	if (!xtalk_raw) {
+		ERR("Allocating XTALK device memory failed\n");
+		return NULL;
+	}
+	xtalk_raw->xtalk_base = xtalk_base;
+	ret = xtalk_set_protocol(xtalk_raw->xtalk_base, &xtalk_raw_proto, NULL);
+	if (ret < 0) {
+		ERR("GLOBAL Protocol registration failed: %d\n", ret);
+		goto err;
+	}
+	DBG("%s: xtalk_raw=%p\n", __func__, xtalk_raw);
+	return xtalk_raw;
+err:
+	xtalk_raw_delete(xtalk_raw);
+	return NULL;
+}
+
+void xtalk_raw_delete(struct xtalk_raw *xtalk_raw)
+{
+	if (xtalk_raw) {
+		memset(xtalk_raw, 0, sizeof(*xtalk_raw));
+		free(xtalk_raw);
+	}
+}
+
+int xtalk_raw_set_protocol(struct xtalk_raw *xtalk_raw,
+		const struct xtalk_protocol *xproto)
+{
+	return xtalk_set_protocol(xtalk_raw->xtalk_base, &xtalk_raw_proto, xproto);
+}
+
+int xtalk_raw_cmd_send(struct xtalk_raw *xtalk_raw, const char *buf, int len,
+	uint16_t *tx_seq)
+{
+	struct xtalk_command *cmd;
+	char *p;
+	int ret;
+
+	p = malloc(len);
+	if (!p) {
+		ERR("allocation failed (%d bytes)\n", len);
+		return -ENOMEM;
+	}
+	cmd = (struct xtalk_command *)p;
+	memcpy(p, buf, len);
+	cmd->header.len = len;
+
+	ret = send_command(xtalk_raw->xtalk_base, cmd, tx_seq);
+	if (ret < 0) {
+		DBG("%s: send_command(%d bytes) failed ret=%d\n",
+			__func__, len, ret);
+		goto out;
+	}
+	DBG("%s(%d bytes, tx_seq=%d)\n", __func__, len, *tx_seq);
+out:
+	free(p);
+	return ret;
+}
+
+__attribute__((warn_unused_result))
+int xtalk_raw_cmd_recv(struct xtalk_raw *xtalk_raw,
+	struct xtalk_command **reply_ref)
+{
+	struct xtalk_base *xtalk_base;
+	const struct xtalk_protocol	*xproto;
+	struct xtalk_command		*reply = NULL;
+	const struct xtalk_command_desc	*reply_desc;
+	const char			*protoname;
+	int				ret;
+	xtalk_cmd_callback_t		callback;
+
+	xtalk_base = xtalk_raw->xtalk_base;
+	xproto = &xtalk_base->xproto;
+	protoname = (xproto) ? xproto->name : "GLOBAL";
+	/* So the caller knows if a reply was received */
+	if (reply_ref)
+		*reply_ref = NULL;
+	ret = recv_command(xtalk_base, &reply);
+	if (ret <= 0) {
+		DBG("%s: failed (xproto = %s, ret = %d)\n",
+			__func__, protoname, ret);
+		goto err;
+	}
+	DBG("REPLY OP: 0x%X\n", reply->header.op);
+        if (debug_mask & DBG_MASK)
+                xtalk_dump_command(reply);
+	/* reply_desc may be NULL (raw reply to application) */
+	reply_desc = get_command_desc(xproto, reply->header.op);
+	if (reply->header.op == XTALK_ACK) {
+		int	status = CMD_FIELD(reply, XTALK, ACK, stat);
+
+		if (status != STAT_OK) {
+			ERR("Got NACK(seq=%d): %d %s\n",
+				reply->header.seq,
+				status,
+				ack_status_msg(xproto, status));
+		}
+		/* Good expected ACK ... */
+	}
+	DBG("got reply seq=%d op=0x%X (%d bytes)\n",
+		reply->header.seq,
+		reply->header.op,
+		ret);
+	/* Find if there is associated callback */
+	ret = xtalk_cmd_callback(xtalk_base, reply->header.op, NULL, &callback);
+	if (ret < 0) {
+		ERR("Failed getting callback for op=0x%X\n", reply->header.op);
+		goto err;
+	}
+	if (callback) {
+		/* Override return value with callback return value */
+		ret = callback(xtalk_base, reply_desc, reply);
+		DBG("%s: callback for 0x%X returned %d\n", __func__,
+			reply->header.op, ret);
+	}
+	if (reply_ref)
+		*reply_ref = reply;
+	return 0;
+err:
+	if (reply)
+		free_command(reply);
+	return ret;
+}
+
+int xtalk_raw_buffer_send(struct xtalk_raw *xraw, const char *buf, int len)
+{
+	dump_packet(LOG_DEBUG, DBG_MASK, __func__, buf, len);
+	return send_buffer(xraw->xtalk_base, buf, len);
+}
+
+int xtalk_raw_buffer_recv(struct xtalk_raw *xraw, char *buf, int len)
+{
+	int ret;
+
+	ret = recv_buffer(xraw->xtalk_base, buf, len);
+	if (ret >= 0)
+		dump_packet(LOG_DEBUG, DBG_MASK, __func__, buf, ret);
+	return ret;
+}

xpp/xtalk/xtalk_raw_test.c

@@ -0,0 +1,207 @@
+#include <assert.h>
+#include <errno.h>
+#include <getopt.h>
+#include <stdio.h>
+#include <stdint.h>
+#include <string.h>
+#include <xtalk/debug.h>
+#include <xtalk/xusb.h>
+#include <xtalk/proto_raw.h>
+#include <autoconfig.h>
+
+static char	*progname;
+
+#define	DBG_MASK	0x10
+
+static void usage()
+{
+	fprintf(stderr, "Usage: %s [options...] -D <device> [hexnum ....]\n",
+		progname);
+	fprintf(stderr, "\tOptions:\n");
+	fprintf(stderr, "\t\t[-v]               # Increase verbosity\n");
+	fprintf(stderr,
+		"\t\t[-d mask]          # Debug mask (0xFF for everything)\n");
+	fprintf(stderr, "\tDevice:\n");
+	fprintf(stderr, "\t\t/proc/bus/usb/<bus>/<dev>\n");
+	fprintf(stderr, "\t\t/dev/bus/usb/<bus>/<dev>\n");
+	exit(1);
+}
+
+static void xusb_destructor(void *data)
+{
+	struct xusb_device *xusb_device = data;
+	xusb_destroy(xusb_device);
+}
+
+static const struct test_struct {
+	struct xusb_spec	spec;
+	int			interface_num;
+} known_devices[] = {
+	{ SPEC_HEAD(0xe4e4, 0x1162, "astribank2-FPGA"), 0 },
+	{{}, 0 },
+};
+
+int proto_ack_cb(
+	const struct xtalk_base *xtalk_base,
+	const struct xtalk_command_desc *cmd_desc,
+	struct xtalk_command *cmd)
+{
+	const char *name = (cmd_desc->name) ? cmd_desc->name : "RAW";
+
+	printf("%s: op=0x%X (%s): len=%d\n", __func__,
+		cmd_desc->op, name, cmd->header.len);
+	return 0;
+}
+
+/*
+ * Not const, because we override proto_version for testing
+ */
+static struct xtalk_protocol   xtalk_raw_test_base = {
+	.name   = "XTALK_TEST",
+	.proto_version = 0,	/* Modified in test_device() */
+	.commands = {
+	},
+	.ack_statuses = {
+	}
+};
+
+static int test_device(struct xusb_iface *xusb_iface, int timeout)
+{
+	struct xtalk_base *xtalk_base = NULL;
+	struct xtalk_raw *xtalk_raw = NULL;
+	struct xtalk_command *reply;
+	uint16_t tx_seq;
+	int ret;
+
+	xtalk_base = xtalk_base_new_on_xusb(xusb_iface);
+	if (!xtalk_base) {
+		ERR("Failed creating the xtalk device abstraction\n");
+		ret = -ENOMEM;
+		goto err;
+	}
+	xtalk_raw = xtalk_raw_new(xtalk_base);
+	if (!xtalk_raw) {
+		ERR("Failed creating the xtalk sync device abstraction\n");
+		ret = -ENOMEM;
+		goto err;
+	}
+	ret = xtalk_set_timeout(xtalk_base, timeout);
+	INFO("Original timeout=%d, now set to %d\n", ret, timeout);
+	/* override constness for testing */
+	ret = xtalk_raw_set_protocol(xtalk_raw, &xtalk_raw_test_base);
+	if (ret < 0) {
+		ERR("%s Protocol registration failed: %d\n",
+			xtalk_raw_test_base.name, ret);
+		ret = -EPROTO;
+		goto err;
+	}
+	ret = xtalk_cmd_callback(xtalk_base, XTALK_OP(XTALK, ACK), proto_ack_cb, NULL);
+	if (ret < 0) {
+		ERR("%s Callback registration failed: %d\n",
+			xtalk_raw_test_base.name, ret);
+		ret = -EPROTO;
+		goto err;
+	}
+	INFO("Device and Protocol are ready\n");
+	ret = xtalk_raw_cmd_send(xtalk_raw, "abcdef", 6, &tx_seq);
+	if (ret < 0) {
+		ERR("Failed sending raw command: %d\n", ret);
+		ret = -EPROTO;
+		goto err;
+	}
+	do {
+		ret = xtalk_raw_cmd_recv(xtalk_raw, &reply);
+		if (ret < 0) {
+			if (ret == -ETIMEDOUT) {
+				printf("timeout\n");
+				continue;
+			}
+			ERR("Read error (ret=%d)\n", ret);
+			goto err;
+		}
+		assert(reply);
+		printf("Got %d (len=%d)\n", reply->header.op, reply->header.len);
+	} while (1);
+err:
+	if (xtalk_raw)
+		xtalk_raw_delete(xtalk_raw);
+	if (xtalk_base)
+		xtalk_base_delete(xtalk_base);
+	return ret;
+}
+
+static int run_spec(int i, xusb_filter_t filter, char *devpath, int timeout)
+{
+	const struct xusb_spec	*s = &known_devices[i].spec;
+	int			interface_num = known_devices[i].interface_num;
+	struct xlist_node	*xlist;
+	struct xlist_node	*curr;
+	struct xusb_device	*xusb_device;
+	int			success = 1;
+
+	if (!s->name)
+		return 0;
+	xlist = xusb_find_byproduct(s, 1, filter, devpath);
+	if (!xlist_length(xlist))
+		return 1;
+	INFO("total %zd devices of type %s\n", xlist_length(xlist), s->name);
+	for (curr = xlist_shift(xlist); curr; curr = xlist_shift(xlist)) {
+		struct xusb_iface *xusb_iface;
+		int ret;
+
+		xusb_device = curr->data;
+		xusb_showinfo(xusb_device);
+		INFO("Testing interface %d\n", interface_num);
+		ret = xusb_claim(xusb_device, interface_num, &xusb_iface);
+		if (ret == 0) {
+			ret = test_device(xusb_iface, timeout);
+			if (ret < 0)
+				success = 0;
+		}
+		xusb_destroy(xusb_device);
+	}
+	xlist_destroy(xlist, xusb_destructor);
+	return success;
+}
+
+int main(int argc, char *argv[])
+{
+	char			*devpath = NULL;
+	const char		options[] = "vd:D:EFpt:";
+	xusb_filter_t		filter = NULL;
+	int			timeout = 500;	/* millies */
+	int			i;
+
+	progname = argv[0];
+	while (1) {
+		int	c;
+
+		c = getopt(argc, argv, options);
+		if (c == -1)
+			break;
+
+		switch (c) {
+		case 'D':
+			devpath = optarg;
+			filter = xusb_filter_bypath;
+			break;
+		case 'v':
+			verbose++;
+			break;
+		case 't':
+			timeout = strtoul(optarg, NULL, 0);
+			break;
+		case 'd':
+			debug_mask = strtoul(optarg, NULL, 0);
+			break;
+		case 'h':
+		default:
+			ERR("Unknown option '%c'\n", c);
+			usage();
+		}
+	}
+	i = 0;
+	while (run_spec(i, filter, devpath, timeout))
+		i++;
+	return 0;
+}

xpp/xtalk/xtalk_send.8

@@ -0,0 +1,49 @@
+.\"                                      Hey, EMACS: -*- nroff -*-
+.\" (C) Copyright 2013 Oron Peled <oron@actcom.co.il>,
+.\"
+.TH XTALK_SEND 8 "March 14, 2013"
+.\"
+.\" Some roff macros, for reference:
+.\" .nh        disable hyphenation
+.\" .hy        enable hyphenation
+.\" .ad l      left justify
+.\" .ad b      justify to both left and right margins
+.\" .nf        disable filling
+.\" .fi        enable filling
+.\" .br        insert line break
+.\" .sp <n>    insert n+1 empty lines
+.\" for manpage-specific macros, see man(7)
+.SH NAME
+xtalk_send \- send arbitrary packets to XTALK devices
+.SH SYNOPSIS
+.B xtalk_send
+.RI [ options ] " hexnum" ...
+.br
+.SH DESCRIPTION
+This manual page documents briefly the \fBxtalk_send\fP command.
+.PP
+\fBxtalk_send\fP is a program that send arbitrary packets to Xorcom devices
+that use the XTALK protocol.
+.SH OPTIONS
+A summary of options is included below:
+.TP
+.B \-I <iface_num>
+Specify USB interface number (default 1).
+.TP
+.B \-t <timeout>
+Timeout from send until an answer is received (default 500).
+.TP
+.B \-Q
+Query protocol version. This is only valid for synchronous XTALK protocols.
+Usually, these protocols are bound to USB interface 1.
+.TP
+.B \-h
+Show summary of options.
+.TP
+.B \-v
+Increase output verbosity.
+.TP
+.B \-d <mask>
+Debug mask. Use 0xFF for everything.
+.SH AUTHOR
+Oron Peled <oron@actcom.co.il>

xpp/xtalk/xtalk_send.c

@@ -0,0 +1,220 @@
+/*
+ * Written by Oron Peled <oron@actcom.co.il>
+ * Copyright (C) 2008-2011, Xorcom
+ *
+ * All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+ *
+ */
+
+#include <stdio.h>
+#include <getopt.h>
+#include <string.h>
+#include <stdlib.h>
+#include <errno.h>
+#include <assert.h>
+#include <arpa/inet.h>
+#include <xtalk/debug.h>
+#include <xtalk/xusb.h>
+#include <xtalk/proto_sync.h>
+#include <autoconfig.h>
+
+#define	DBG_MASK	0x80
+
+static char	*progname;
+static int	timeout		= 500;	/* msec */
+static int	iface_num	= 1;
+
+static void usage()
+{
+	fprintf(stderr, "Usage: %s [options...] -D <busnum>/<devnum> [hexnum ....]\n",
+		progname);
+	fprintf(stderr, "\tOptions:\n");
+	fprintf(stderr,
+		"\t\t[-I<iface_num>]    # Interface number (default %d)\n",
+		iface_num);
+	fprintf(stderr,
+		"\t\t[-t<timeout>]      # Timeout (default %d)\n",
+		timeout);
+	fprintf(stderr, "\t\t[-Q]               # Query protocol version\n");
+	fprintf(stderr, "\t\t[-v]               # Increase verbosity\n");
+	fprintf(stderr,
+		"\t\t[-d mask]          # Debug mask (0xFF for everything)\n");
+	fprintf(stderr, "\t\t[-h]               # This help\n");
+	exit(1);
+}
+
+/***** XTALK Interface *****************************************************/
+static const struct xtalk_protocol   xtalk_protocol = {
+	.name   = "XTALK-DERIVED",
+	.proto_version = 0,
+	.commands = {
+	},
+	.ack_statuses = {
+	}
+};
+
+
+/***** XUSB Interface ******************************************************/
+
+static int sendto_device(struct xusb_iface *iface, int nargs, char *args[])
+{
+	char *reply = NULL;
+	char *buf = NULL;
+	int ret = 0;
+	int i;
+
+	assert(nargs >= 0);
+	if (!nargs)
+		goto out;
+	buf = malloc(nargs);
+	if (!buf) {
+		ERR("Out of memory for %d command bytes\n", nargs);
+		ret = -ENOMEM;
+		goto out;
+	}
+	for (i = 0; i < nargs; i++) {
+		int	val = strtoul(args[i], NULL, 16);
+		printf("%d> 0x%02X\n", i, val);
+		buf[i] = val;
+	}
+	ret = xusb_send(iface, buf, nargs, timeout);
+	if (ret < 0) {
+		ERR("xusb_send failed ret=%d\n", ret);
+		goto out;
+	}
+	reply = malloc(PACKET_SIZE);
+	if (!reply) {
+		ERR("Out of memory\n");
+		ret = -ENOMEM;
+		goto out;
+	}
+	ret = xusb_recv(iface, reply, PACKET_SIZE, timeout);
+	if (ret < 0) {
+		ERR("Receive from usb failed.\n");
+		goto out;
+	}
+	dump_packet(LOG_INFO, 0, "REPLY", reply, ret);
+	ret = 0;
+out:
+	if (reply)
+		free(reply);
+	if (buf)
+		free(buf);
+	return ret;
+}
+
+static int show_protocol(struct xtalk_sync *xtalk_sync, struct xusb_iface *iface)
+{
+	int	ret;
+
+	ret = xtalk_sync_set_protocol(xtalk_sync, &xtalk_protocol);
+	if (ret < 0) {
+		ERR("%s Protocol registration failed: %s\n",
+			xtalk_protocol.name, strerror(-ret));
+		return ret;
+	}
+	ret = xtalk_proto_query(xtalk_sync);
+	if (ret < 0) {
+		ERR("Protocol query error: %s\n", strerror(-ret));
+		return ret;
+	}
+	INFO("usb:%s: Protocol version 0x%X\n", xusb_devpath(xusb_deviceof(iface)), ret);
+	return 0;
+}
+
+int main(int argc, char *argv[])
+{
+	char			*devpath = NULL;
+	struct xusb_device	*xusb_device;
+	struct xtalk_base	*xtalk_base;
+	struct xtalk_sync	*xtalk_sync;
+	struct xusb_iface	*iface;
+	const char		options[] = "vd:D:t:I:i:o:Q";
+	int			query = 0;
+	int			ret;
+
+	progname = argv[0];
+	while (1) {
+		int	c;
+
+		c = getopt(argc, argv, options);
+		if (c == -1)
+			break;
+
+		switch (c) {
+		case 'D':
+			devpath = optarg;
+			break;
+		case 'I':
+			iface_num = strtoul(optarg, NULL, 0);
+			break;
+		case 't':
+			timeout = strtoul(optarg, NULL, 0);
+			break;
+		case 'Q':
+			query++;
+			break;
+		case 'v':
+			verbose++;
+			break;
+		case 'd':
+			debug_mask = strtoul(optarg, NULL, 0);
+			break;
+		case 'h':
+		default:
+			ERR("Unknown option '%c'\n", c);
+			usage();
+		}
+	}
+	if (!devpath) {
+		ERR("Missing device path\n");
+		usage();
+	}
+	xusb_device = xusb_find_bypath(devpath);
+	if (!xusb_device) {
+		ERR("No XUSB device found\n");
+		return 1;
+	}
+	ret = xusb_claim(xusb_device, iface_num, &iface);
+	if (ret < 0) {
+		ERR("Claiming interface #%d failed (ret = %d)\n", iface_num, ret);
+		return 1;
+	}
+	xusb_showinfo(xusb_deviceof(iface));
+	xtalk_base = xtalk_base_new_on_xusb(iface);
+	if (!xtalk_base) {
+		ERR("Failed creating the xtalk device abstraction\n");
+		return 1;
+	}
+	xtalk_sync = xtalk_sync_new(xtalk_base);
+	if (!xtalk_sync) {
+		ERR("Failed creating the xtalk device abstraction\n");
+		return 1;
+	}
+	if (query) {
+		ret = show_protocol(xtalk_sync, iface);
+		if (ret < 0)
+			return 1;
+	}
+	ret = sendto_device(iface, argc - optind, argv + optind);
+	if (ret < 0)
+		ERR("Command failed: %d\n", ret);
+	xtalk_sync_delete(xtalk_sync);
+	xtalk_base_delete(xtalk_base);
+	xusb_destroy(xusb_deviceof(iface));
+	return 0;
+}

xpp/xtalk/xtalk_sync.c

@@ -0,0 +1,290 @@
+/*
+ * Written by Oron Peled <oron@actcom.co.il>
+ * Copyright (C) 2009, Xorcom
+ *
+ * All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+ *
+ */
+
+#include <stdio.h>
+#include <stdlib.h>
+#include <string.h>
+#include <assert.h>
+#include <errno.h>
+#include <arpa/inet.h>
+#include <xtalk/debug.h>
+#include <xtalk/proto_sync.h>
+#include <autoconfig.h>
+#include "xtalk_base.h"
+
+#define	DBG_MASK	0x02
+
+/*
+ * Base XTALK device. A pointer to this struct
+ * should be included in the struct representing
+ * the dialect.
+ */
+struct xtalk_sync {
+	struct xtalk_base	*xtalk_base;
+};
+
+CMD_DEF(XTALK, ACK,
+	uint8_t stat;
+	);
+
+CMD_DEF(XTALK, PROTO_GET,
+	uint8_t proto_version;
+	uint8_t reserved;
+	);
+
+CMD_DEF(XTALK, PROTO_GET_REPLY,
+	uint8_t proto_version;
+	uint8_t reserved;
+	);
+
+union XTALK_PDATA(XTALK) {
+	MEMBER(XTALK, ACK);
+	MEMBER(XTALK, PROTO_GET);
+	MEMBER(XTALK, PROTO_GET_REPLY);
+} PACKED members;
+
+const struct xtalk_protocol	xtalk_sync_proto = {
+	.name	= "XTALK-SYNC",
+	.proto_version = 0,
+	.commands = {
+		CMD_RECV(XTALK, ACK),
+		CMD_SEND(XTALK, PROTO_GET),
+		CMD_RECV(XTALK, PROTO_GET_REPLY),
+	},
+	.ack_statuses = {
+		ACK_STAT(OK, "Acknowledges previous command"),
+		ACK_STAT(FAIL, "Last command failed"),
+		ACK_STAT(RESET_FAIL, "reset failed"),
+		ACK_STAT(NODEST, "No destination is selected"),
+		ACK_STAT(MISMATCH, "Data mismatch"),
+		ACK_STAT(NOACCESS, "No access"),
+		ACK_STAT(BAD_CMD, "Bad command"),
+		ACK_STAT(TOO_SHORT, "Packet is too short"),
+		ACK_STAT(ERROFFS, "Offset error (not used)"),
+		ACK_STAT(NO_LEEPROM, "Large EEPROM was not found"),
+		ACK_STAT(NO_EEPROM, "No EEPROM was found"),
+		ACK_STAT(WRITE_FAIL, "Writing to device failed"),
+		ACK_STAT(NOPWR_ERR, "No power on USB connector"),
+	}
+};
+
+struct xtalk_sync *xtalk_sync_new(struct xtalk_base *xtalk_base)
+{
+	struct xtalk_sync *xtalk_sync;
+	int ret;
+
+	assert(xtalk_base);
+	xtalk_sync = calloc(1, sizeof(*xtalk_sync));
+	if (!xtalk_sync) {
+		ERR("Allocating XTALK device memory failed\n");
+		return NULL;
+	}
+	xtalk_sync->xtalk_base = xtalk_base;
+	ret = xtalk_set_protocol(xtalk_sync->xtalk_base, &xtalk_sync_proto, NULL);
+	if (ret < 0) {
+		ERR("GLOBAL Protocol registration failed: %d\n", ret);
+		goto err;
+	}
+        DBG("%s: xtalk_sync=%p\n", __func__, xtalk_sync);
+	return xtalk_sync;
+err:
+	xtalk_sync_delete(xtalk_sync);
+	return NULL;
+}
+
+void xtalk_sync_delete(struct xtalk_sync *xtalk_sync)
+{
+	if (xtalk_sync) {
+		memset(xtalk_sync, 0, sizeof(*xtalk_sync));
+		free(xtalk_sync);
+	}
+}
+
+int xtalk_sync_set_protocol(struct xtalk_sync *xtalk_sync,
+		const struct xtalk_protocol *xproto)
+{
+	return xtalk_set_protocol(xtalk_sync->xtalk_base, &xtalk_sync_proto, xproto);
+}
+
+__attribute__((warn_unused_result))
+int process_command(
+	struct xtalk_sync *xtalk_sync,
+	struct xtalk_command *cmd,
+	struct xtalk_command **reply_ref,
+	uint16_t *tx_seq)
+{
+	struct xtalk_base *xtalk_base;
+	const struct xtalk_protocol	*xproto;
+	struct xtalk_command		*reply = NULL;
+	const struct xtalk_command_desc	*reply_desc;
+	const struct xtalk_command_desc	*expected;
+	const struct xtalk_command_desc	*cmd_desc;
+	uint8_t				reply_op;
+	const char			*protoname;
+	int				ret;
+	xtalk_cmd_callback_t		callback;
+
+	xtalk_base = xtalk_sync->xtalk_base;
+	xproto = &xtalk_base->xproto;
+	protoname = (xproto) ? xproto->name : "GLOBAL";
+	/* So the caller knows if a reply was received */
+	if (reply_ref)
+		*reply_ref = NULL;
+	reply_op = cmd->header.op | XTALK_REPLY_MASK;
+	cmd_desc = get_command_desc(xproto, cmd->header.op);
+	expected = get_command_desc(xproto, reply_op);
+	ret = send_command(xtalk_base, cmd, tx_seq);
+	if (ret < 0) {
+		ERR("send_command failed: %d\n", ret);
+		goto out;
+	}
+	if (!reply_ref) {
+		DBG("No reply requested\n");
+		goto out;
+	}
+	ret = recv_command(xtalk_base, &reply);
+	if (ret <= 0) {
+		DBG("recv_command failed (ret = %d)\n", ret);
+		goto out;
+	}
+	*reply_ref = reply;
+	if ((reply->header.op & 0x80) != 0x80) {
+		ERR("Unexpected reply op=0x%02X, should have MSB set.\n",
+			reply->header.op);
+		ret = -EPROTO;
+		goto out;
+	}
+	reply_desc = get_command_desc(xproto, reply->header.op);
+	if (!reply_desc) {
+		ERR("Unknown reply (proto=%s) op=0x%02X\n",
+			protoname, reply->header.op);
+		dump_packet(LOG_ERR, 0, __func__, (const char *)reply, ret);
+		ret = -EPROTO;
+		goto out;
+	}
+	DBG("REPLY OP: 0x%X [%s]\n", reply->header.op, reply_desc->name);
+	if (reply->header.op == XTALK_ACK) {
+		uint8_t status = CMD_FIELD(reply, XTALK, ACK, stat);
+
+		if (expected) {
+			ERR("Expected OP=0x%02X: Got ACK(%d): %s\n",
+				reply_op,
+				status,
+				ack_status_msg(xproto, status));
+			ret = -EPROTO;
+			goto out;
+		} else if (status != STAT_OK) {
+
+			ERR("Got ACK (for OP=0x%X [%s]): %d %s\n",
+				cmd->header.op,
+				cmd_desc->name,
+				status, ack_status_msg(xproto, status));
+			ret = -EPROTO;
+			goto out;
+		}
+		/* Good expected ACK ... */
+	} else if (reply->header.op != reply_op) {
+			ERR("Expected OP=0x%02X: Got OP=0x%02X\n",
+				reply_op, reply->header.op);
+			ret = -EPROTO;
+			goto out;
+	}
+	if (expected && expected->len > reply->header.len) {
+			ERR("Expected len=%d: Got len=%d\n",
+				expected->len, reply->header.len);
+			ret = -EPROTO;
+			goto out;
+	}
+	if (cmd->header.seq != reply->header.seq) {
+			ERR("Expected seq=%d: Got seq=%d\n",
+				cmd->header.seq, reply->header.seq);
+			ret = -EPROTO;
+			goto out;
+	}
+	/* Find if there is associated callback */
+	ret = xtalk_cmd_callback(xtalk_base, reply->header.op, NULL, &callback);
+	if (ret < 0) {
+		ERR("Failed getting callback for op=0x%X\n", reply->header.op);
+		goto out;
+	}
+	ret = reply->header.len;	/* All good, return the length */
+	DBG("got reply op 0x%X (%d bytes)\n", reply->header.op, ret);
+	if (callback) {
+		/* Override return value with callback return value */
+		ret = callback(xtalk_base, reply_desc, reply);
+		DBG("%s: callback for 0x%X returned %d\n", __func__,
+			reply->header.op, ret);
+	}
+out:
+	free_command(cmd);
+	if (!reply_ref && reply)
+		free_command(reply);
+	return ret;
+}
+
+/*
+ * Protocol Commands
+ */
+
+int xtalk_proto_query(struct xtalk_sync *xtalk_sync)
+{
+	struct xtalk_base *xtalk_base;
+	struct xtalk_command		*cmd;
+	struct xtalk_command		*reply;
+	uint8_t				proto_version;
+	int				ret;
+	uint16_t			tx_seq;
+
+	DBG("\n");
+	assert(xtalk_sync != NULL);
+	xtalk_base = xtalk_sync->xtalk_base;
+	proto_version = xtalk_base->xproto.proto_version;
+	cmd = new_command(xtalk_base, XTALK_OP(XTALK, PROTO_GET), 0);
+	if (!cmd) {
+		ERR("new_command failed\n");
+		return -ENOMEM;
+	}
+	/* Protocol Version */
+	CMD_FIELD(cmd, XTALK, PROTO_GET, proto_version) = proto_version;
+	CMD_FIELD(cmd, XTALK, PROTO_GET, reserved) = 0;	/* RESERVED */
+	ret = process_command(xtalk_sync, cmd, &reply, &tx_seq);
+	if (ret < 0) {
+		ERR("process_command failed: %d\n", ret);
+		goto out;
+	}
+	xtalk_base->xtalk_proto_version =
+		CMD_FIELD(reply, XTALK, PROTO_GET_REPLY, proto_version);
+	if (xtalk_base->xtalk_proto_version != proto_version) {
+		DBG("Got %s protocol version: 0x%02x (expected 0x%02x)\n",
+			xtalk_base->xproto.name,
+			xtalk_base->xtalk_proto_version,
+			proto_version);
+		ret = xtalk_base->xtalk_proto_version;
+		goto out;
+	}
+	DBG("Protocol version: %02x (tx_seq = %d)\n",
+		xtalk_base->xtalk_proto_version, tx_seq);
+	ret = xtalk_base->xtalk_proto_version;
+out:
+	free_command(reply);
+	return ret;
+}

xpp/xtalk/xtalk_test.c

@@ -0,0 +1,199 @@
+#include <errno.h>
+#include <getopt.h>
+#include <stdio.h>
+#include <stdint.h>
+#include <string.h>
+#include <xtalk/debug.h>
+#include <xtalk/xusb.h>
+#include <xtalk/proto_sync.h>
+#include <autoconfig.h>
+
+static char	*progname;
+
+#define	DBG_MASK	0x10
+
+static void usage()
+{
+	fprintf(stderr, "Usage: %s [options...] -D <device> [hexnum ....]\n",
+		progname);
+	fprintf(stderr, "\tOptions:\n");
+	fprintf(stderr, "\t\t[-v]               # Increase verbosity\n");
+	fprintf(stderr,
+		"\t\t[-d mask]          # Debug mask (0xFF for everything)\n");
+	fprintf(stderr, "\tDevice:\n");
+	fprintf(stderr, "\t\t/proc/bus/usb/<bus>/<dev>\n");
+	fprintf(stderr, "\t\t/dev/bus/usb/<bus>/<dev>\n");
+	exit(1);
+}
+
+static void xusb_destructor(void *data)
+{
+	struct xusb_device	*xusb_device = data;
+	xusb_destroy(xusb_device);
+}
+
+#define	KNOWN_DEV(p, i, v, d) \
+		{ SPEC_HEAD(0xe4e4, (p), (d)), (i), (v) }
+
+static const struct test_struct {
+	struct xusb_spec	spec;
+	int			interface_num;
+	uint8_t			proto_version;
+} known_devices[] = {
+	/*        PROD    I  V     NAME */
+	KNOWN_DEV(0x1161, 1, 0x14, "astribank2-USB"),
+	KNOWN_DEV(0x1162, 1, 0x14, "astribank2-FPGA"),
+	KNOWN_DEV(0x1191, 1, 0x10, "xpanel"),
+	KNOWN_DEV(0x1183, 1, 0x11, "multi-ps"),
+	KNOWN_DEV(0x11a3, 0, 0x01, "auth-dongle"),
+	KNOWN_DEV(0xbb01, 1, 0x10, "iwc"),
+	KNOWN_DEV(0,      0, 0,    NULL),
+};
+
+int proto_get_reply_cb(
+	const struct xtalk_base *xtalk_base,
+	const struct xtalk_command_desc *cmd_desc,
+	struct xtalk_command *cmd)
+{
+	INFO("CALLBACK: op=0x%X (%s): len=%d\n",
+		cmd_desc->op, cmd_desc->name, cmd->header.len);
+	return 0;
+}
+
+/*
+ * Not const, because we override proto_version for testing
+ */
+static struct xtalk_protocol   xtalk_test_base = {
+	.name   = "XTALK_TEST",
+	.proto_version = 0,	/* Modified in test_device() */
+	.commands = {
+	},
+	.ack_statuses = {
+	}
+};
+
+static int test_device(struct xusb_iface *xusb_iface, uint8_t wanted_version, int timeout)
+{
+	struct xtalk_base *xtalk_base;
+	struct xtalk_sync *xtalk_sync;
+	int proto_version;
+	int ret;
+
+	xtalk_base = xtalk_base_new_on_xusb(xusb_iface);
+	if (!xtalk_base) {
+		ERR("Failed creating the xtalk device abstraction\n");
+		return -ENOMEM;
+	}
+	xtalk_sync = xtalk_sync_new(xtalk_base);
+	if (!xtalk_sync) {
+		ERR("Failed creating the xtalk sync device abstraction\n");
+		return -ENOMEM;
+	}
+	ret = xtalk_set_timeout(xtalk_base, timeout);
+	INFO("Original timeout=%d, now set to %d\n", ret, timeout);
+	/* override constness for testing */
+	xtalk_test_base.proto_version = wanted_version;
+	ret = xtalk_sync_set_protocol(xtalk_sync, &xtalk_test_base);
+	if (ret < 0) {
+		ERR("%s Protocol registration failed: %d\n",
+			xtalk_test_base.name, ret);
+		return -EPROTO;
+	}
+	ret = xtalk_cmd_callback(xtalk_base, XTALK_OP(XTALK, PROTO_GET_REPLY), proto_get_reply_cb, NULL);
+	if (ret < 0) {
+		ERR("%s Callback registration failed: %d\n",
+			xtalk_test_base.name, ret);
+		return -EPROTO;
+	}
+	proto_version = xtalk_proto_query(xtalk_sync);
+	if (proto_version < 0) {
+		ERR("Protocol query error: %s\n", strerror(-proto_version));
+		return proto_version;
+	}
+	if (proto_version != xtalk_test_base.proto_version) {
+		ERR("Bad protocol version: 0x%02x\n", proto_version);
+		return -EPROTO;
+	}
+	INFO("Device and Protocol are ready (proto_version=0x%X)\n",
+		proto_version);
+	xtalk_sync_delete(xtalk_sync);
+	xtalk_base_delete(xtalk_base);
+	return 0;
+}
+
+static int run_spec(int i, xusb_filter_t filter, char *devpath, int timeout)
+{
+	const struct xusb_spec	*s = &known_devices[i].spec;
+	int			interface_num = known_devices[i].interface_num;
+	uint8_t			proto_version = known_devices[i].proto_version;
+	struct xlist_node	*xlist;
+	struct xlist_node	*curr;
+	struct xusb_device	*xusb_device;
+	int			success = 1;
+
+	if (!s->name)
+		return 0;
+	xlist = xusb_find_byproduct(s, 1, filter, devpath);
+	if (!xlist_length(xlist))
+		return 1;
+	INFO("total %zd devices of type %s\n", xlist_length(xlist), s->name);
+	for (curr = xlist_shift(xlist); curr; curr = xlist_shift(xlist)) {
+		struct xusb_iface *xusb_iface;
+		int ret;
+
+		xusb_device = curr->data;
+		xusb_showinfo(xusb_device);
+		INFO("Testing interface %d\n", interface_num);
+		ret = xusb_claim(xusb_device, interface_num, &xusb_iface);
+		if (ret == 0) {
+			ret = test_device(xusb_iface, proto_version, timeout);
+			if (ret < 0)
+				success = 0;
+		}
+		xusb_destroy(xusb_device);
+	}
+	xlist_destroy(xlist, xusb_destructor);
+	return success;
+}
+
+int main(int argc, char *argv[])
+{
+	char			*devpath = NULL;
+	const char		options[] = "vd:D:EFpt:";
+	xusb_filter_t		filter = NULL;
+	int			timeout = 500;	/* millies */
+	int			i;
+
+	progname = argv[0];
+	while (1) {
+		int	c;
+
+		c = getopt(argc, argv, options);
+		if (c == -1)
+			break;
+
+		switch (c) {
+		case 'D':
+			devpath = optarg;
+			filter = xusb_filter_bypath;
+			break;
+		case 'v':
+			verbose++;
+			break;
+		case 't':
+			timeout = strtoul(optarg, NULL, 0);
+			break;
+		case 'd':
+			debug_mask = strtoul(optarg, NULL, 0);
+			break;
+		case 'h':
+		default:
+			ERR("Unknown option '%c'\n", c);
+			usage();
+		}
+	}
+	i = 0;
+	while (run_spec(i, filter, devpath, timeout))
+		i++;
+	return 0;
+}