Use autotagged externals

git-svn-id: http://svn.astersk.org/svn/dahdi/tools/tags/2.5.0.2@10261 17933a7a-c749-41c5-a318-cba88f637d49

.version

@@ -0,0 +1 @@
+2.5.0.2

README

@@ -66,7 +66,7 @@ Installation to a Subtree
 ^^^^^^^^^^^^^^^^^^^^^^^^^
 The following may be useful when testing the package or when preparing a
 package for a binary distribution (such as an rpm package) installing
-onto a subtree rather than on th real system. 
+onto a subtree rather than on the real system.
 
   make install DESTDIR=targetdir
 
@@ -138,7 +138,7 @@ include::genconf_parameters.asciidoc[]
 Tonezones
 ~~~~~~~~~
 The file zonedata.c contains the information about the tone zones used
-in libtonezone (and hence also in ztcfg). Here is a list of those zones:
+in libtonezone (and hence also in dahdi_cfg). Here is a list of those zones:
 
 include::tonezones.txt[]
 

xpp/README.Astribank

@@ -43,27 +43,42 @@ an FXO module of two ports.
 
 Building and Installation
 -------------------------
-Apart from the standard DAHDI build requirements, you also need libusb
-development headers to build the fpga_load firmware loader. This is
-typically the package libusb-dev on Debian (and derivatives like Ubuntu)
-or libusb-devel on RedHat (and derivatives like CentOS/Trixbox).
+Apart from the standard DAHDI build requirements, you also need:
 
-Patch for BRI
-~~~~~~~~~~~~~
-(As of DAHDI 2.2 this patch is no longer needed. Furthermore, it does
-not apply. The same directory has a newer patch that applies. This
-section is kept in the document for the time being for the benefit of
-those with older versions)
+* *libusb development headers* to build the fpga_load firmware loader.
+  This is typically the package libusb-dev on Debian (and derivatives
+  like Ubuntu) or libusb-devel on RedHat (and derivatives like
+  CentOS/Trixbox).
+* *Echo Canceller Module firmware*: If you have an Astribank with an
+  echo canceller module, see the following section.
 
-In order for the BRI module (xpd_bri.ko) to build, you still need an
-external patch: 
+Follow the build instructions of DAHDI-linux and DAHDI-tools. But
+Basically, in dahdi-linux run:
 
-http://updates.xorcom.com/astribank/bristuff/dahdi_bri_dchan.diff[]
+  make
+  make install # as root
 
-You need to apply it to the dahdi-linux tarball before building:
+And later in dahdi-tools:
 
-  wget http://updates.xorcom.com/astribank/bristuff/dahdi_bri_dchan.diff
-  patch -p1 <dahdi_bri_dchan.diff
+  ./configure
+  make
+  make install # as root
+
+
+Echo Canceller Firmware
+~~~~~~~~~~~~~~~~~~~~~~~
+If you install from source, you should copy OCT6104E-256D.ima to the
+source tree (before running make install:
+
+  wget http://updates.xorcom.com/astribank/hwec/OCT6104E-256D.ima
+  mv OCT6104E-256D.ima drivers/dahdi/xpp/firmwares/
+
+Alternatively, if you have already installed DAHDI-linux (e.g. from a
+binary package that does not include the firmware) you can just copy
+it directly to the target directory, /usr/share/dahdi using:
+
+  cd /usr/share/dahdi
+  wget http://updates.xorcom.com/astribank/hwec/OCT6104E-256D.ima
 
 
 Installation Scenarios

xpp/perl_modules/Dahdi/Span.pm

@@ -131,7 +131,7 @@ my @bri_strings = (
 		'(?:quad|octo)BRI PCI ISDN Card.* \[(NT|TE)\]',
 		'octoBRI \[(NT|TE)\] ',
 		'HFC-S PCI A ISDN.* \[(NT|TE)\] ',
-		'(B4XXP) \(PCI\) Card', # Does not expose NT/TE type
+		'(B4XXP) \(PCI\) Card', # Use dahdi_scan to determine TE/NT mode
 		'(WCBRI)', # has selectable NT/TE modes via dahdi_cfg
 		);
 
@@ -177,6 +177,28 @@ sub init_proto($$) {
 	$self->{TYPE} = "${proto}_$self->{TERMTYPE}";
 }
 
+sub get_digital_spantype {
+	my $span_no = shift;
+	my @lines = split /\n/, `dahdi_scan`;
+	my $found_span = 0;
+	foreach my $line (@lines) {
+		if (! $found_span) {
+			if ($line =~ m/\[$span_no\]/) {
+				$found_span = 1;
+			}
+		} else {
+			if ($line !~ m/^\[/) {
+				if ($line =~ m/digital-(TE|NT)/ ){
+					return $1;
+				}
+			} else {
+				$found_span = 0;
+			}
+		}
+	}
+	die "Cannot determine digital spantype";
+}
+
 sub new($$) {
 	my $pack = shift or die "Wasn't called as a class method\n";
 	my $proc_file = shift or die "Missing a proc file parameter\n";
@@ -191,10 +213,16 @@ sub new($$) {
 	$self->{IS_DIGITAL} = 0;
 	$self->{IS_BRI} = 0;
 	$self->{IS_PRI} = 0;
+	$self->{TERMTYPE} = "UNKNOWN";
 	foreach my $cardtype (@bri_strings) {
 		if($head =~ m/$cardtype/) {
 			my $termtype = $1;
-			$termtype = 'TE' if ( $1 eq 'B4XXP' or $1 eq 'WCBRI' );
+			if ($1 eq 'B4XXP') {
+				$termtype = get_digital_spantype($num);
+			}
+			if ($1 eq 'WCBRI') {
+				$termtype = 'TE';
+			}
 			$self->{IS_DIGITAL} = 1;
 			$self->{IS_BRI} = 1;
 			$self->{TERMTYPE} = $termtype;
@@ -230,6 +258,11 @@ sub new($$) {
 			last;
 		}
 	}
+
+	if (($self->is_soft_term_type == 0) and ($self->termtype eq "UNKNOWN")) {
+		$self->{IS_SOFT_TERM_TYPE} = 1;
+	}
+
 	($self->{NAME}, $self->{DESCRIPTION}) = (split(/\s+/, $head, 4))[2, 3];
 	$self->{IS_DAHDI_SYNC_MASTER} =
 		($self->{DESCRIPTION} =~ /\(MASTER\)/) ? 1 : 0;
@@ -368,7 +401,7 @@ SPEC:
 		#print STDERR "match: $match\n";
 		foreach my $pattern (@patlist) {
 			#print STDERR "testmatch: $pattern =~ $match\n";
-			if($pattern =~ $match) {
+			if($pattern =~ /^$match$/) {
 				#print STDERR "MATCH '$pattern' ~ '$match' termtype=$termtype\n";
 				$match_termtype = $termtype;
 				last SPEC;

xpp/waitfor_xpds

@@ -29,6 +29,7 @@ set -e
 # For lab testing
 mydir=`dirname $0`
 PATH="${mydir}:${PATH}"
+XPP_WAIT_AB_TIMEOUT=80
 
 [ -r /etc/dahdi/init.conf ] && . /etc/dahdi/init.conf
 
@@ -56,7 +57,7 @@ fi
 
 # Wait for driver and first device
 echo -n 1>&2 "Astribanks detection "
-tries=40
+tries="$XPP_WAIT_AB_TIMEOUT"
 while [ ! -e "/sys/bus/astribanks/devices/xbus-00" ]
 do
 	if [ "$tries" -le 0 ]; then