registration-order: Added dahdi_auto_assign_compat

Maintains the original registration order as was before span
assignments. Should allow seemless trannsition to
dahdi.auto_assign_spans=0

* The idea:
  - We stop handling in udev the case of missing
    /etc/dahdi/assigned-spans.conf
  - Instead we rely on "registration_time" dahdi_device attribute from
    DAHDI-linux
  - Then, we can sort the devices and assign their spans in
    /etc/init.d/dahdi
* Mechanics:
  - From /etc/init.d/dahdi, we run a new 'dahdi_auto_assign_compat'
    script (after "waitfor_xpds" etc.)
  - In this script we "auto" assign spans of non-Astribank devices
  - In the end of the script we run "dahdi_registration" which
    does the same for Astribank devices.

Signed-off-by: Tzafrir Cohen <tzafrir.cohen@xorcom.com>
Acked-by: Russ Meyerriecks <rmeyerriecks@digium.com>

Makefile

@@ -108,6 +108,7 @@ endif
 ASSIGNED_DATA_SCRIPTS:=\
 	dahdi_handle_device	\
 	dahdi_span_config	\
+	dahdi_auto_assign_compat	\
 	span_config.d/10-dahdi-cfg	\
 	span_config.d/20-fxotune	\
 	span_config.d/50-asterisk	\

dahdi.init

@@ -148,11 +148,6 @@ xpp_startup() {
 	if ! /usr/share/dahdi/waitfor_xpds; then return 0; fi
 
 	hotplug_exit_after_load
-
-	# overriding locales for the above two, as perl can be noisy
-	# when locales are missing.
-	# No register all the devices if they didn't auto-register:
-	LC_ALL=C dahdi_registration on
 }
 
 
@@ -263,6 +258,9 @@ case "$1" in
 
 	xpp_startup
 
+	# Assign all spans that weren't handled via udev + /etc/dahdi/assigned-spans.conf
+	/usr/share/dahdi/dahdi_auto_assign_compat
+
 	if [ $system = debian ]; then
 	    echo -n "Running dahdi_cfg: "
 	    $DAHDI_CFG_CMD 2> /dev/null && echo -n "done"

hotplug/dahdi_auto_assign_compat

@@ -0,0 +1,25 @@
+#! /bin/sh
+
+devdir='/sys/bus/dahdi_devices/devices'
+
+# DAHDI is loaded?
+if [ ! -d "$devdir" ]; then
+	exit 0
+fi
+
+devices_by_registration_time() {
+	grep -H '' $devdir/*/registration_time 2>/dev/null | \
+		sed 's,/registration_time:,\t,' | \
+		sort -k 2,2
+}
+
+# First assign non-Astribank devices
+devices_by_registration_time | \
+	grep -v '/astribanks:' | \
+	while read devpath time; do
+		echo >&2 "D: auto '$devpath'"
+		dahdi_span_assignments auto "$devpath"
+	done
+
+# Now handle Astribanks
+LC_ALL=C dahdi_registration -Rv on

hotplug/dahdi_handle_device

@@ -77,8 +77,9 @@ add)
 	run_parts 2>&1 < /dev/null | $LOGGER &
 	;;
 remove)
-	# Nothing to do yet...
 	echo "$ACTION: $DEVPATH" | $LOGGER
+	# Background run -- don't block udev
+	run_parts 2>&1 < /dev/null | $LOGGER &
 	;;
 *)
 	echo "UNHANDLED: $ACTION: $DEVPATH" | $LOGGER

hotplug/handle_device.d/10-span-types

@@ -1,5 +1,12 @@
 #! /bin/sh
 
+case "$ACTION" in
+add)
+	;;
+*)
+	exit 0
+esac
+
 if [ -r "$DAHDICONFDIR/span-types.conf" ]; then
 	dahdi_span_types set "/sys$DEVPATH"
 fi

hotplug/handle_device.d/20-span-assignments

@@ -1,8 +1,15 @@
 #! /bin/sh
 
+case "$ACTION" in
+add)
+	;;
+*)
+	exit 0
+esac
+
+# For now, handle only spans in assigned-spans.conf
+# We leave other cases to /etc/init.d/dahdi, so
+# legacy ordering can be preserved.
 if [ -r "$DAHDICONFDIR/assigned-spans.conf" ]; then
 	dahdi_span_assignments add "/sys$DEVPATH"
-else
-	# No configuration. No order guaranteed
-	dahdi_span_assignments auto "/sys$DEVPATH"
 fi