xpp: astribank_hexload: allow empty span specs

DAHDI 2.9.2 added support for -S (span specs). However if this option
was not specified, it fails to run.

Signed-off-by: Tzafrir Cohen <tzafrir.cohen@xorcom.com>

.gitignore

@@ -4,6 +4,7 @@
 *.asciidoc
 *.html
 build_tools/menuselect-deps
+autoconfig.h
 config.log
 config.status
 dahdi_cfg

Makefile

@@ -213,7 +213,7 @@ README.html: README system.conf.asciidoc init.conf.asciidoc tonezones.txt \
 README.Astribank.html: xpp/README.Astribank
 	$(ASCIIDOC) -o $@ -n -a toc -a toclevels=4 $<
 
-# on Debian: this requires the full groof, not just groff-base.
+# on Debian: this requires the full groff, not just groff-base.
 %.8.html: %.8
 	man -Thtml $^ >$@
 

dahdi_cfg.c

@@ -29,6 +29,7 @@
 
 #include <stdio.h> 
 #include <getopt.h>
+#include <signal.h>
 #include <string.h>
 #include <stdarg.h>
 #include <stdlib.h>
@@ -108,7 +109,7 @@ static int fiftysixkhdlc[DAHDI_MAX_CHANNELS];
 
 static int spans=0;
 
-static int fo_real = 1;
+static int dry_run = 0;
 
 static int verbose = 0;
 
@@ -761,7 +762,16 @@ static int chanconfig(char *keyword, char *args)
 			} else {
 				fprintf(stderr, "Huh? (%s)\n", keyword);
 			}
-			if (is_digital)
+
+			if (cc[x].sigtype != DAHDI_SIG_CAS &&
+			    cc[x].sigtype != DAHDI_SIG_DACS &&
+			    cc[x].sigtype != DAHDI_SIG_DACS_RBS) {
+				if (NULL != idle) {
+					fprintf(stderr, "WARNING: idlebits are not valid on %s channels.\n", sig[x]);
+				}
+			}
+
+			if (is_digital) 
 				chan2span[x] = current_span;
 			else
 				current_span = 0;
@@ -816,8 +826,9 @@ static int apply_fiftysix(void)
 	int chanfd;
 
 	for (x = 1; x < DAHDI_MAX_CHANNELS; x++) {
-		if (skip_channel(x))
+		if (skip_channel(x) || !cc[x].sigtype)
 			continue;
+
 		chanfd = open("/dev/dahdi/channel", O_RDWR);
 		if (chanfd == -1) {
 			fprintf(stderr, 
@@ -1540,15 +1551,27 @@ static int span_restrict(char *str)
 	return 1;
 }
 
+static const char *SEM_NAME = "dahdi_cfg";
+static sem_t *lock = SEM_FAILED;
+
+static void signal_handler(int signal)
+{
+	if (SEM_FAILED != lock) {
+		sem_unlink(SEM_NAME);
+	}
+	/* The default handler should have been restored before this handler was
+	 * called, so we can let the "normal" processing finish the cleanup. */
+	raise(signal);
+}
+
 int main(int argc, char *argv[])
 {
 	int c;
 	char *buf;
 	char *key, *value;
 	int x,found;
-	sem_t *lock = SEM_FAILED;
-	const char *SEM_NAME = "dahdi_cfg";
 	int exit_code = 0;
+	struct sigaction act;
 
 	while((c = getopt(argc, argv, "fthc:vsd::C:S:")) != -1) {
 		switch(c) {
@@ -1568,7 +1591,7 @@ int main(int argc, char *argv[])
 			force++;
 			break;
 		case 't':
-			fo_real = 0;
+			dry_run = 1;
 			break;
 		case 's':
 			stopmode = 1;
@@ -1661,15 +1684,28 @@ finish:
 	if (verbose) {
 		printconfig(fd);
 	}
-	if (!fo_real) 
-		exit(0);
 
+	if (dry_run)
+		exit(0);
 	
 	if (debug & DEBUG_APPLY) {
 		printf("About to open Master device\n");
 		fflush(stdout);
 	}
 
+	sigemptyset(&act.sa_mask);
+	act.sa_handler = signal_handler;
+	act.sa_flags = SA_RESETHAND;
+
+	if (sigaction(SIGTERM, &act, NULL) == -1) {
+		perror("Failed to install SIGTERM handler.");
+		exit(1);
+	}
+	if (sigaction(SIGINT, &act, NULL) == -1) {
+		perror("Failed to install SIGINT handler.");
+		exit(1);
+	}
+
 	lock = sem_open(SEM_NAME, O_CREAT, O_RDWR, 1);
 	if (SEM_FAILED == lock) {
 		perror("Unable to create 'dahdi_cfg' mutex");

modules.sample

@@ -15,6 +15,8 @@ wct4xxp
 
 # Digium TE435
 # Digium TE235
+# Digium TE436
+# Digium TE236
 wcte43x
 
 # Digium TE120P: PCI single-port T1/E1/J1

tonezone.c

@@ -89,18 +89,19 @@ static int build_tone(void *data, size_t size, struct tone_zone_sound *t, int *c
 	int firstnobang = -1;
 	int freq1, freq2, time;
 	int modulate = 0;
-	float gain;
+	float db, gain;
 	int used = 0;
 	dup = strdup(t->data);
 	s = strtok(dup, ",");
 	while(s && strlen(s)) {
 		/* Handle optional ! which signifies don't start here*/
-		if (s[0] == '!') 
+		if (s[0] == '!') {
 			s++;
-		else if (firstnobang < 0) {
+		} else if (firstnobang < 0) {
 			PRINT_DEBUG("First no bang: %s\n", s);
 			firstnobang = *count;
 		}
+
 		if (sscanf(s, "%d+%d/%d", &freq1, &freq2, &time) == 3) {
 			/* f1+f2/time format */
 			PRINT_DEBUG("f1+f2/time format: %d, %d, %d\n", freq1, freq2, time);
@@ -111,18 +112,31 @@ static int build_tone(void *data, size_t size, struct tone_zone_sound *t, int *c
 		} else if (sscanf(s, "%d+%d", &freq1, &freq2) == 2) {
 			PRINT_DEBUG("f1+f2 format: %d, %d\n", freq1, freq2);
 			time = 0;
+			db = 1.0;
 		} else if (sscanf(s, "%d*%d", &freq1, &freq2) == 2) {
 			PRINT_DEBUG("f1+f2 format: %d, %d\n", freq1, freq2);
 			modulate = 1;
 			time = 0;
+			db = 1.0;
 		} else if (sscanf(s, "%d/%d", &freq1, &time) == 2) {
 			PRINT_DEBUG("f1/time format: %d, %d\n", freq1, time);
 			freq2 = 0;
+			db = 1.0;
+		} else if (sscanf(s, "%d@/%d", &freq1, &time) == 2) {
+			/* The "@" character has been added to enable an
+ 			 * approximately -20db tone generation of any frequency This has been done
+ 			 * primarily to generate the Australian congestion tone.
+			 * Example: "425/375,0/375,425@/375,0/375" 
+			 */
+			PRINT_DEBUG("f1 reduced amplitude/time format: %d, %d\n", freq1,time);
+			db = 0.3;
+			freq2 = 0;
 		} else if (sscanf(s, "%d", &freq1) == 1) {
 			PRINT_DEBUG("f1 format: %d\n", freq1);
 			firstnobang = *count;
 			freq2 = 0;
 			time = 0;
+			db = 1.0;
 		} else {
 			fprintf(stderr, "tone component '%s' of '%s' is a syntax error\n", s,t->data);
 			return -1;
@@ -137,7 +151,7 @@ static int build_tone(void *data, size_t size, struct tone_zone_sound *t, int *c
 		td = data;
 
 		/* Bring it down -8 dbm */
-		gain = pow(10.0, (LEVEL - 3.14) / 20.0) * 65536.0 / 2.0;
+		gain = db*(pow(10.0, (LEVEL - 3.14) / 20.0) * 65536.0 / 2.0);
 
 		td->fac1 = 2.0 * cos(2.0 * M_PI * (freq1 / 8000.0)) * 32768.0;
 		td->init_v2_1 = sin(-4.0 * M_PI * (freq1 / 8000.0)) * gain;

xpp/Makefile

@@ -54,7 +54,7 @@ OCT_DEFINES	= \
 	-DcOCT6100_MAX_ECHO_CHANNELS=672		\
 	-DcOCT6100_MAX_MIXER_EVENTS=1344
 
-ECHO_LOADER_SRC	= echo_loader.c
+ECHO_LOADER_SRC	= echo_loader.c parse_span_specs.c
 ECHO_LOADER	= $(ECHO_LOADER_SRC:.c=.o)
 endif
 

xpp/astribank_hexload.8

@@ -7,7 +7,7 @@ astribank_hexload \- Xorcom Astribank (xpp) firmware loader
 
 .B astribank_hexload \-D \fIdevice-path\fR \-p [\fIoptions\fR] \fIhexfile1 .. hexfile4\fR
 
-.B astribank_hexload \-D \fIdevice-path\fR \-O [-A] [\fIoptions\fR] \fIimagefile\fR
+.B astribank_hexload \-D \fIdevice-path\fR \-O [-A] [-S \fIspan-specs\fR] [\fIoptions\fR] \fIimagefile\fR
 
 .B astribank_hexload \-D \fIdevice-path\fR \-o [\fIoptions\fR]
 
@@ -29,7 +29,7 @@ It can be used to load either an FPGA firmware or a PIC
 firmware. It is normally run by the script xpp_fxloader.
 
 .SH OPTIONS
-.B \-D 
+.B \-D
 .I device-path
 .RS
 Required. The device to read from/write to. This is
@@ -95,13 +95,38 @@ use for BRI and E1. If not set, the default mu-Law (G.711u), which is
 what you'd normally use for FXS, FXO and T1.
 .RE
 
+.B \-S \fIspan-specs\fR
+.RS
+This option should only be used when loading Octasic echo canceller firmware
+and only if the first Astribank module is PRI.
+
+Its goal is to allow specifying different \fIline-mode\fR (E1/T1/J1) in different
+ports of the PRI module. \fBastribank_hexload\fR use the \fIspan-specs\fR argument
+to select aLaw/uLaw for each of the PRI ports in the module.
+
+The \fIspan-specs\fR is a list of items separated by whitespace or commas.
+Each item is composed of a port selector, colon and a \fIline-mode\fR specifier.
+This syntax follows the syntax of specifiers in \fB/etc/dahdi/span-types.conf\fR.
+
+Examples:
+.RS
+3:E1 \- The 3'rd port is E1.
+
+*:T1 \- Any unspecified port is T1 (wildcard match).
+
+1:T1,2:T1,*:E1 \- First and second ports are T1, the rest are E1.
+.RE
+
+If the \fB\-S\fR is not given, the PRI default is determined by the existance of the \fB\-A-fR option.
+.RE
+
 .SH SEE ALSO
 fxload(8), lsusb(8), astribank_tool(8)
 
 .SH AUTHOR
 This manual page was written by Tzafrir Cohen <tzafrir.cohen@xorcom.com> .
 Permission is granted to copy, distribute and/or modify this document under
-the terms of the GNU General Public License, Version 2 any 
+the terms of the GNU General Public License, Version 2 any
 later version published by the Free Software Foundation.
 
 On Debian systems, the complete text of the GNU General Public

xpp/astribank_hexload.c

@@ -39,6 +39,7 @@
 #define	DBG_MASK	0x80
 #define	MAX_HEX_LINES	64000
 #define HAVE_OCTASIC	1
+#define DEF_SPAN_SPEC_FORMAT	"*:%c1" /* %c: 'E' or 'T' */
 
 static char	*progname;
 
@@ -50,6 +51,7 @@ static void usage()
 #if HAVE_OCTASIC
 	fprintf(stderr, "\t\t[-O]               # Load Octasic firmware\n");
 	fprintf(stderr, "\t\t[-o]               # Show Octasic version\n");
+	fprintf(stderr, "\t\t[-S <pri-spec>]    # Set PRI type specification string\n");
 #endif
 	fprintf(stderr, "\t\t[-F]               # Load FPGA firmware\n");
 	fprintf(stderr, "\t\t[-p]               # Load PIC firmware\n");
@@ -164,11 +166,13 @@ int main(int argc, char *argv[])
 	int			opt_ecver = 0;
 #if HAVE_OCTASIC
 	int			opt_alaw = 0;
+	const char		*span_spec = NULL;
+	char			def_span_spec[sizeof(DEF_SPAN_SPEC_FORMAT)];
 #endif
 	int			opt_dest = 0;
 	int			opt_sum = 0;
 	enum dev_dest		dest = DEST_NONE;
-	const char		options[] = "vd:D:EFOopA";
+	const char		options[] = "vd:D:EFOopAS:";
 	int			iface_num;
 	int			ret;
 
@@ -210,6 +214,9 @@ int main(int argc, char *argv[])
 			case 'A':
 				opt_alaw = 1;
 				break;
+			case 'S':
+				span_spec = optarg;
+				break;
 #endif
 			case 'p':
 				opt_pic = 1;
@@ -247,6 +254,13 @@ int main(int argc, char *argv[])
 		ERR("Missing device path.\n");
 		usage();
 	}
+# ifdef HAVE_OCTASIC
+	if (!span_spec) {
+		snprintf(def_span_spec, sizeof(def_span_spec),
+				DEF_SPAN_SPEC_FORMAT, opt_alaw? 'E' : 'T');
+		span_spec = def_span_spec;
+	}
+#endif
 	if(opt_dest) {
 		/*
 		 * MPP Interface
@@ -290,7 +304,7 @@ int main(int argc, char *argv[])
 			}
 #if HAVE_OCTASIC
 		} else if (opt_echo) {
-			if((ret = load_echo(astribank, argv[optind], opt_alaw)) < 0) {
+			if((ret = load_echo(astribank, argv[optind], opt_alaw, span_spec)) < 0) {
 				ERR("%s: Loading ECHO's failed\n", devpath);
 				return 1;
 			}

xpp/dahdi_registration

@@ -74,8 +74,6 @@ if(defined($on)) {	# Translate to booleans
 	$should_output = 0 unless $verbose;
 }
 
-undef $on if $dahdi_autoreg and not $opts{'R'};
-
 sub state2str($) {
 	return (shift)?"on":"off";
 }
@@ -84,38 +82,41 @@ sub myprintf {
 	printf @_ if $should_output;
 }
 
-my @spans = Dahdi::spans;
-
 foreach my $xbus (Dahdi::Xpp::xbuses($sorter)) {
-	myprintf "%-10s\t%3s-%s\t%s\n",
-		$xbus->name, $xbus->xpporder, $xbus->label, $xbus->connector;
-	next unless $xbus->status eq 'CONNECTED';
-	foreach my $xpd (Dahdi::Xpp::Xpd::telephony_devs($xbus->xpds())) {
-		my $prev = $xpd->dahdi_registration($on);
-		if(!defined($prev)) {			# Failure
-			printf "%s: Failed %s\n", $xpd->fqn, $!;
-			next;
-		}
-		myprintf "\t%-10s: ", $xpd->fqn;
-		if(!defined($on)) {			# Query only
-			my ($span) = grep { $_->name eq $xpd->fqn } @spans;
-			my $spanstr = ($span) ? ("Span " . $span->num) : "";
-			myprintf "%s %s\n", state2str($prev), $spanstr ;
-			next;
-		}
-		myprintf "%3s ==> %3s\n", state2str($prev), state2str($on);
+	my $prev = $xbus->dahdi_registration($on);
+	if(!defined($prev)) {			# Failure
+		printf STDERR "%s: Failed %s\n", $xbus->name, $!;
+		next;
 	}
-	next unless defined($on) && $on;
+	my $reg_str;
+	if (defined $on) {
+		$reg_str = ($on) ? "registering" : "unregistering";
+	} else {
+		$reg_str = ($prev) ? "registered" : "unregistered";
+	}
+	myprintf "%-10s\t%3s-%s\t%s (%s)\n",
+		$xbus->name, $xbus->xpporder, $xbus->label, $xbus->connector,
+		$reg_str;
+	next unless $xbus->status eq 'CONNECTED';
 	# Only assign if no default assignment, or forced by '-R' option
-	if ($opts{'R'} || ! $default_auto_assign) {
-		# Emulate /etc/dahdi/assigned-spans.conf:
-		#   - We iterate over $xbus according to /etc/dahdi/xpp_order
-		#   - We "auto" assign all spans of current $xbus
-		my $devpath = sprintf "/sys/bus/dahdi_devices/devices/astribanks:xbus-%02d", $xbus->num;
-		myprintf "auto-assign $devpath\n";
-		my @cmd = ('dahdi_span_assignments', 'auto', $devpath);
-		system @cmd;
-		warn "Failed '@cmd' (status=$?)\n" if $?;
+	if (defined($on) && $on) {
+		if ($opts{'R'} || ! $default_auto_assign) {
+			# Emulate /etc/dahdi/assigned-spans.conf:
+			#   - We iterate over $xbus according to /etc/dahdi/xpp_order
+			#   - We "auto" assign all spans of current $xbus
+			my $devpath = sprintf "/sys/bus/dahdi_devices/devices/astribanks:xbus-%02d", $xbus->num;
+			my @cmd = ('dahdi_span_assignments', 'auto', $devpath);
+			system @cmd;
+			warn "Failed '@cmd' (status=$?)\n" if $?;
+		}
+		# wait for UDEV to do its stuff
+		system "dahdi_waitfor_span_assignments assigned";
+	}
+	foreach my $xpd (Dahdi::Xpp::Xpd::telephony_devs($xbus->xpds())) {
+		my $spanno = $xpd->xpd_getattr('span');
+		myprintf "\t%-10s: ", $xpd->fqn;
+		my $spanstr = ($spanno) ? ("Span " . $spanno) : "unassigned";
+		myprintf "%s\n", $spanstr ;
 	}
 }
 myprintf "# Sorted: $sort_order\n" if defined $sort_order;

xpp/echo_loader.c

@@ -31,6 +31,7 @@
 #include "echo_loader.h"
 #include "debug.h"
 #include <oct6100api/oct6100_api.h>
+#include "parse_span_specs.h"
 
 #define DBG_MASK        	0x03
 #define	TIMEOUT			1000
@@ -560,7 +561,7 @@ inline int get_ver(struct astribank_device *astribank)
 }
 
 //+++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
-UINT32 init_octasic(char *filename, struct astribank_device *astribank, int is_alaw)
+UINT32 init_octasic(char *filename, struct astribank_device *astribank, struct span_specs *span_specs)
 {
 	int							cpld_ver;
 	struct echo_mod						*echo_mod;
@@ -580,6 +581,8 @@ UINT32 init_octasic(char *filename, struct astribank_device *astribank, int is_a
 	/* Channel resources.*/
 	tOCT6100_CHANNEL_OPEN					ChannelOpen;
 	UINT32							ulChanHndl;
+	enum tdm_codec tdm_codec;
+	int spanno;
 
 	if (test_send(astribank) < 0)
 		return cOCT6100_ERR_FATAL;
@@ -729,7 +732,17 @@ UINT32 init_octasic(char *filename, struct astribank_device *astribank, int is_a
 		/* Set the channel to work at the echo cancellation mode.*/
 		ChannelOpen.ulEchoOperationMode 	= cOCT6100_ECHO_OP_MODE_NORMAL;
 
-		pcmLaw						= (is_alaw ? cOCT6100_PCM_A_LAW: cOCT6100_PCM_U_LAW);
+		spanno = nChan % 4;
+		assert(spanno >= 0 && spanno < MAX_SPANNO);
+		tdm_codec = span_specs->span_is_alaw[spanno];
+		if (tdm_codec == TDM_CODEC_UNKNOWN) {
+			AB_ERR(astribank, "Calculated bad alaw/ulaw on channel %d\n", nChan);
+			return cOCT6100_ERR_FATAL;
+		}
+		if (nChan < 4)
+			AB_INFO(astribank, "ECHO PRI port %d = %s\n", spanno+1, (tdm_codec == TDM_CODEC_ALAW) ? "alaw" : "ulaw");
+
+		pcmLaw						= ((tdm_codec == TDM_CODEC_ALAW) ? cOCT6100_PCM_A_LAW: cOCT6100_PCM_U_LAW);
 
 		/* Configure the TDM interface.*/
 		ChannelOpen.TdmConfig.ulRinPcmLaw		= pcmLaw;
@@ -825,15 +838,22 @@ UINT32 init_octasic(char *filename, struct astribank_device *astribank, int is_a
 }
 //+++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
 
-int load_echo(struct astribank_device *astribank, char *filename, int is_alaw)
+int load_echo(struct astribank_device *astribank, char *filename, int default_is_alaw, const char *span_spec)
 {
 	int		ret;
 	UINT32		octasic_status;
+	struct span_specs *span_specs;
 
-	AB_INFO(astribank, "Loading ECHOCAN Firmware: %s (%s)\n",
-		filename, (is_alaw) ? "alaw" : "ulaw");
+	span_specs = parse_span_specifications(span_spec, default_is_alaw);
+	if (!span_specs) {
+		AB_ERR(astribank, "ECHO parsing span specs failed\n");
+		return -EFAULT;
+	}
+	AB_INFO(astribank, "Loading ECHOCAN Firmware: %s (default %s)\n",
+		filename, (default_is_alaw) ? "alaw" : "ulaw");
 	usb_buffer_init(astribank, &usb_buffer);
-	octasic_status = init_octasic(filename, astribank, is_alaw);
+	octasic_status = init_octasic(filename, astribank, span_specs);
+	free_span_specifications(span_specs);
 	if (octasic_status != cOCT6100_ERR_OK) {
 		AB_ERR(astribank, "ECHO %s burning failed (%08X)\n",
 			filename, octasic_status);

xpp/echo_loader.h

@@ -26,7 +26,7 @@
 #include "astribank_usb.h"
 
 int spi_send(struct astribank_device *astribank, uint16_t addr, uint16_t data, int recv_answer, int ver);
-int load_echo(struct astribank_device *astribank, char *filename, int is_alaw);
+int load_echo(struct astribank_device *astribank, char *filename, int is_alaw, const char *span_spec);
 int echo_ver(struct astribank_device *astribank);
 
 #endif	/* ECHO_LOADER_H */

xpp/parse_span_specs.c

@@ -0,0 +1,152 @@
+/*
+ * Written by Oron Peled <oron@actcom.co.il>
+ * Copyright (C) 2014, Xorcom
+ *
+ * All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+ *
+ */
+
+#include <stdio.h>
+#include <assert.h>
+#include <string.h>
+#include <stdlib.h>
+#include <errno.h>
+#include <limits.h>
+#include <regex.h>
+#include <fnmatch.h>
+#include <sys/time.h>
+#include "parse_span_specs.h"
+
+void free_span_specifications(struct span_specs *span_specs)
+{
+	if (span_specs) {
+		if (span_specs->buf)
+			free(span_specs->buf);
+		free(span_specs);
+	}
+}
+
+static enum tdm_codec is_alaw_span_type(const char *span_type)
+{
+	assert(span_type);
+	if (strcmp(span_type, "E1") == 0)
+		return TDM_CODEC_ALAW;
+	else if (strcmp(span_type, "T1") == 0)
+		return TDM_CODEC_ULAW;
+	return TDM_CODEC_UNKNOWN;
+}
+
+struct span_specs *parse_span_specifications(const char *spec_string, int default_is_alaw)
+{
+	struct span_specs *span_specs;
+	char *p;
+	int spanno;
+	int i;
+
+	if (!spec_string)
+		return NULL;
+	/* Allocate  and Initialize */
+	span_specs = calloc(sizeof(char *), MAX_SPANNO);
+	if (!span_specs)
+		goto err;
+	for (spanno = 0; spanno < MAX_SPANNO; spanno++)
+		span_specs->span_is_alaw[spanno] = TDM_CODEC_UNKNOWN;
+	span_specs->buf = strdup(spec_string);
+	if (!span_specs->buf)
+		goto err;
+	for (i = 0;; i++) {
+		char *curr_item;
+		char *tokenize_key;
+		char *key;
+		char *value;
+		enum tdm_codec is_alaw;
+		int matched;
+
+		/* Split to items */
+		p = (i == 0) ? span_specs->buf : NULL;
+		p = strtok_r(p, " \t,", &curr_item);
+		if (!p)
+			break;
+
+		/* Split to <span>:<type> */
+		key = strtok_r(p, ":", &tokenize_key);
+		if (!key) {
+			fprintf(stderr,
+				"Missing ':' (item #%d inside '%s')\n",
+				i+1, spec_string);
+			goto err;
+		}
+		value = strtok_r(NULL, ":", &tokenize_key);
+		if (!value) {
+			fprintf(stderr,
+				"Missing value after ':' (item #%d inside '%s')\n",
+				i+1, spec_string);
+			goto err;
+		}
+
+		/* Match span specification and set alaw/ulaw */
+		is_alaw = is_alaw_span_type(value);
+		if (is_alaw == TDM_CODEC_UNKNOWN) {
+			fprintf(stderr,
+				"Illegal span type '%s' (item #%d inside '%s')\n",
+				value, i+1, spec_string);
+			goto err;
+		}
+		matched = 0;
+		for (spanno = 0; spanno < MAX_SPANNO; spanno++) {
+			char tmpbuf[BUFSIZ];
+
+			snprintf(tmpbuf, sizeof(tmpbuf), "%d", spanno + 1);
+			if (fnmatch(p, tmpbuf, 0) == 0) {
+				matched++;
+				span_specs->span_is_alaw[spanno] = is_alaw;
+			}
+		}
+		if (!matched) {
+			fprintf(stderr,
+				"Span specification '%s' does not match any span (item #%d inside '%s')\n",
+				key, i+1, spec_string);
+			goto err;
+		}
+	}
+
+	/* Set defaults */
+	for (spanno = 0; spanno < MAX_SPANNO; spanno++) {
+		if (span_specs->span_is_alaw[spanno] == TDM_CODEC_UNKNOWN) {
+			span_specs->span_is_alaw[spanno] = default_is_alaw;
+		}
+	}
+	return span_specs;
+err:
+	free_span_specifications(span_specs);
+	return NULL;
+}
+
+void print_span_specifications(struct span_specs *span_specs, FILE *output)
+{
+	int spanno;
+
+	if (!span_specs)
+		return;
+	for (spanno = 0; spanno < MAX_SPANNO; spanno++) {
+		enum tdm_codec is_alaw;
+
+		is_alaw = span_specs->span_is_alaw[spanno];
+		fprintf(output, "%d %s\n",
+			spanno+1, (is_alaw == TDM_CODEC_ALAW) ? "alaw" : "ulaw");
+	}
+}

xpp/parse_span_specs.h

@@ -0,0 +1,43 @@
+#ifndef	PARSE_SPAN_SPECS_H
+#define	PARSE_SPAN_SPECS_H
+
+/*
+ * Written by Oron Peled <oron@actcom.co.il>
+ * Copyright (C) 2014, Xorcom
+ *
+ * All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+ *
+ */
+
+#define	MAX_SPANNO	4	/* E1/T1 spans -- always in first unit. 1-based */
+
+enum tdm_codec {
+	TDM_CODEC_UNKNOWN,
+	TDM_CODEC_ULAW,
+	TDM_CODEC_ALAW,
+};
+
+struct span_specs {
+	char *buf;
+	enum tdm_codec span_is_alaw[MAX_SPANNO];
+};
+
+struct span_specs *parse_span_specifications(const char *spec_string, int default_is_alaw);
+void free_span_specifications(struct span_specs *span_specs);
+void print_span_specifications(struct span_specs *span_specs, FILE *output);
+
+#endif	/* PARSE_SPAN_SPECS_H */

xpp/perl_modules/Dahdi/Hardware/PCI.pm

@@ -105,6 +105,7 @@ my %pci_ids = (
 
 	# from wcte435/235
 	'd161:800e'		=> { DRIVER => 'wcte43x', DESCRIPTION => 'Wildcard TE435/235' },
+	'd161:8013'		=> { DRIVER => 'wcte43x', DESCRIPTION => 'Wildcard TE436/236' },
 
 	# from wcb4xxp
 	'd161:b410'		=> { DRIVER => 'wcb4xxp', DESCRIPTION => 'Digium Wildcard B410P' },

xpp/perl_modules/Dahdi/Xpp/Xbus.pm

@@ -146,6 +146,40 @@ sub new($$) {
 	return $self;
 }
 
+sub dahdi_registration($$) {
+	my $xbus = shift;
+	my $on = shift;
+	my $result;
+	my $file = sprintf("%s/dahdi_registration", $xbus->sysfs_dir);
+	# Handle old drivers without dahdi_registration xbus attribute
+	if (! -f $file) {
+		warn "Old xpp driver without dahdi_registration support. Emulating it using xpd/span support\n";
+		my @xpds = sort { $a->id <=> $b->id } $xbus->xpds();
+		my $prev;
+		foreach my $xpd (@xpds) {
+			$prev = $xpd->dahdi_registration($on);
+		}
+		return $prev;
+	}
+	# First query
+	open(F, "$file") or die "Failed to open $file for reading: $!";
+	$result = <F>;
+	chomp $result;
+	close F;
+	if(defined($on) and $on ne $result) {		# Now change
+		open(F, ">$file") or die "Failed to open $file for writing: $!";
+		print F ($on)?"1":"0";
+		if(!close(F)) {
+			if($! == 17) {	# EEXISTS
+				# good
+			} else {
+				undef $result;
+			}
+		}
+	}
+	return $result;
+}
+
 sub pretty_xpds($) {
 		my $xbus = shift;
 		my @xpds = sort { $a->id <=> $b->id } $xbus->xpds();

xpp/xpp_fxloader

@@ -68,6 +68,7 @@ FIRMWARE_DIR="${FIRMWARE_DIR:-/usr/share/dahdi}"
 ASTRIBANK_HEXLOAD=${ASTRIBANK_HEXLOAD:-/usr/sbin/astribank_hexload}
 ASTRIBANK_TOOL=${ASTRIBANK_TOOL:-/usr/sbin/astribank_tool}
 XPP_CONFIG="${XPP_CONFIG:-/etc/dahdi/xpp.conf}"
+SPAN_TYPES_CONFIG="${SPAN_TYPES_CONFIG:-/etc/dahdi/span-types.conf}"
 XPP_UDEV_SLEEP_TIME="${XPP_UDEV_SLEEP_TIME:-15}"
 
 USB_RECOV="${USB_RECOV:-USB_RECOV.hex}"
@@ -270,6 +271,15 @@ usb_firmware_all_devices() {
 	wait_renumeration $numdevs 'e4e4/11[3456]1/*' "usb_firmware_all_devices"
 }
 
+filter_span_types() {
+	l="$1"
+	sed < "$SPAN_TYPES_CONFIG" 2>/dev/null \
+		-e 's/#.*//'	\
+		-e 's/[ \t]*$//' \
+		-e 's/^[ \t]*//' \
+		-e '/^$/d' | awk -vlabel="$l" '$1 == label { print $2 }' | tr -s ', \t\n' ','
+}
+
 load_fw_device() {
 	dev="$1"
 	fw="$2"
@@ -279,33 +289,61 @@ load_fw_device() {
 	FPGA_1161*.hex)
 	        echo_file="$FIRMWARE_DIR/OCT6104E-256D.ima"
 		law=''
-		law_str='uLaw'
+		dev_short=`echo "$dev" | sed -e 's,.*/usb/*,,'`
 		abtool_output=`$ASTRIBANK_TOOL -D "$dev" -Q 2>&1`
 		ec_card_type=`echo "$abtool_output" | grep 'CARD 4' | sed -e 's/.*type=//' -e 's/\..*//'`
 		caps_num=`echo "$abtool_output" | grep 'ECHO ports' | sed -e 's/.*: *//'`
 		if [ "$ec_card_type" = '5' ]; then
-			debug "ECHO burning into $dev: $echo_file"
+			debug "ECHO($dev_short): Firmware $echo_file"
 			card_type=`echo "$abtool_output" | grep 'CARD 0' | sed -e 's/.*type=//' -e 's/\..*//'`
 			case "$card_type" in
 			3) 	law="-A";;
 			4)
-				pri_protocol=''
-				if [ -r "$XPP_CONFIG" ]; then
-					pri_protocol=`awk '/^pri_protocol/ {print $2}' $XPP_CONFIG`
+				dev_lsusb=`echo "$dev_short" | tr '/' ':'`
+				# Try modern configuration
+				if [ -r "$SPAN_TYPES_CONFIG" ]; then
+					# Try exact match by label
+					label=`lsusb -s "$dev_lsusb" -v 2>/dev/null | awk '$1 == "iSerial" && $2 == 3 { print $3 }'`
+					if [ "$label" != '' ]; then
+						label="usb:$label"
+						debug "ECHO($dev_short): Search span-types.conf for [$label]"
+						pri_spec=`filter_span_types "${label}"`
+						if [ "$pri_spec" != '' ]; then
+							debug "ECHO($dev_short): Found definitions for [$label] -- '$pri_spec'"
+						fi
+					else
+						debug "ECHO($dev_short): Device without a label"
+					fi
+					# Check wildcard match
+					pri_spec_wildcard=`filter_span_types '*'`
+					if [ "$pri_spec_wildcard" != '' ]; then
+						debug "ECHO($dev_short): Found definitions for wildcard -- $pri_spec_wildcard"
+					fi
+					pri_spec=`echo "$pri_spec_wildcard $pri_spec" | tr -s ' \t\n' ','`
+					if [ "$pri_spec" != '' ]; then
+						pri_spec_params="-S $pri_spec"
+						debug "ECHO($dev_short): pri_spec_params='$pri_spec_params'"
+					fi
 				fi
-				# "E1" or empty (implied E1) means aLaw
-				if [ "$pri_protocol" != 'T1' ]; then
-					law='-A'
+				# Fallback to legacy xpp.conf
+				default_pri_protocol=''
+				law=''
+				if [ -r "$XPP_CONFIG" ]; then
+					default_pri_protocol=`awk '/^pri_protocol/ {print $2}' $XPP_CONFIG`
+					if [ "$default_pri_protocol" != '' ]; then
+						debug "ECHO($dev_short): Found legacy xpp.conf setting -- $default_pri_protocol"
+						# "E1" or empty (implied E1) means aLaw
+						if [ "$default_pri_protocol" != 'T1' ]; then
+							law='-A'
+						fi
+					fi
 				fi
 				;;
 			esac
-			if [ "$law" = '-A' ]; then
-				law_str="aLaw"
-			fi
 			caps_num=`echo "$abtool_output" | grep 'ECHO ports' | sed -e 's/.*: *//'`
-			debug "ECHO: 1st module is $law_str, $caps_num channels allowed."
+			debug "ECHO($dev_short): $caps_num channels allowed."
 			if [ "$caps_num" != '0' ]; then
-				run_astribank_hexload -D "$dev" -O $law "$echo_file"
+				run_astribank_hexload -D "$dev" -O $law $pri_spec_params "$echo_file"
 			else
 				echo "WARNING: ECHO burning was skipped (no capabilities)"
 			fi

zonedata.c

@@ -59,11 +59,18 @@ struct tone_zone builtin_zones[] =
 	  .description = "Australia",
 	  .ringcadence = {  400, 200, 400, 2000 },
 	  .tones = {
-			{ DAHDI_TONE_DIALTONE, "413+438" },
+				  
+			{ DAHDI_TONE_DIALTONE, "415+440" },
 			{ DAHDI_TONE_BUSY, "425/375,0/375" },
 			{ DAHDI_TONE_RINGTONE, "413+438/400,0/200,413+438/400,0/2000" },
-			/* XXX Congestion: Should reduce by 10 db every other cadence XXX */
-			{ DAHDI_TONE_CONGESTION, "425/375,0/375,420/375,0/375" },
+			/* The Australian congestion tone is 425Hz, 375ms On, 375ms Off, with the
+			 * second cadence being half the amplitude of the first; so the first cadence
+			 * is approximately -10dB with the second one being -20dB.  Using the update
+			 * ToneZone.c file, this can be accomplished by adding the "@" symbol in front
+			 * of the frequency to reduce amplification, as in the following entry for
+			 * Congestion:
+			 */
+			{ DAHDI_TONE_CONGESTION, "425/375,0/375,425@/375,0/375" },
 			{ DAHDI_TONE_CALLWAIT, "425/100,0/200,425/200,0/4400" },
 			{ DAHDI_TONE_DIALRECALL, "413+428" },
 			{ DAHDI_TONE_RECORDTONE, "!425/1000,!0/15000,425/360,0/15000" },
@@ -928,6 +935,8 @@ struct tone_zone builtin_zones[] =
 			{ DAHDI_TONE_RECORDTONE, "1400/400,0/15000" },
 			{ DAHDI_TONE_INFO, "950/330,1440/330,1800/330,0/1000" },
 			{ DAHDI_TONE_STUTTER, "!425/100,!0/100,!425/100,!0/100,!425/100,!0/100,!425/100,!0/100,!425/100,!0/100,!425/100,!0/100,425" },
+			/* DIALRECALL - not specified */
+			{ DAHDI_TONE_DIALRECALL, "!350+440/100,!0/100,!350+440/100,!0/100,!350+440/100,!0/100,350+440" },
 		},
 	  .dtmf_high_level = -10,
 	  .dtmf_low_level = -10,
@@ -948,6 +957,8 @@ struct tone_zone builtin_zones[] =
 			/* This should actually be 950+1400+1800, but we only support 2 tones at a time */
 			{ DAHDI_TONE_INFO,       "!950+1400/300,!0/1000,!950+1400/300,!0/1000,!950+1400/1000,0" },
 			{ DAHDI_TONE_STUTTER,    "!450/100,!0/100,!450/100,!0/100,!450/100,!0/100,!450/100,!0/100,!450/100,!0/100,!450/100,!0/100,450" },
+			/* DIALRECALL - not specified */
+			{ DAHDI_TONE_DIALRECALL, "!350+440/100,!0/100,!350+440/100,!0/100,!350+440/100,!0/100,350+440" },
 		},
 		.dtmf_high_level = -10,
 		.dtmf_low_level = -10,
@@ -996,6 +1007,8 @@ struct tone_zone builtin_zones[] =
 			{ DAHDI_TONE_INFO, "950/333,1400/333,1800/333,0/1000" },
 			/* STUTTER TONE - not specified */
 			{ DAHDI_TONE_STUTTER, "!425/100,!0/100,!425/100,!0/100,!425/100,!0/100,!425/100,!0/100,!425/100,!0/100,!425/100,!0/100,425" },
+			/* DIALRECALL - not specified */
+			{ DAHDI_TONE_DIALRECALL, "!350+440/100,!0/100,!350+440/100,!0/100,!350+440/100,!0/100,350+440" },
 		},
 		.dtmf_high_level = -10,
 		.dtmf_low_level = -10,
@@ -1044,6 +1057,8 @@ struct tone_zone builtin_zones[] =
 			{ DAHDI_TONE_INFO, "950/330,1450/330,1850/330,0/1000" },
 			/* STUTTER TONE */
 			{ DAHDI_TONE_STUTTER, "380+420" },
+			/* DIALRECALL - not specified */
+			{ DAHDI_TONE_DIALRECALL, "!350+440/100,!0/100,!350+440/100,!0/100,!350+440/100,!0/100,350+440" },
 		},
 		.dtmf_high_level = -10,
 		.dtmf_low_level = -10,