wcb4xxp: Adds support for b43x/b23x products

Signed-off-by: Russ Meyerriecks <rmeyerriecks@digium.com>

.gitignore

@@ -1,12 +1,29 @@
+*~
 *.o
+*.lo
+*.a
+*.so
+*.la
 .*.o.d
 .*.lo.d
 *.asciidoc
 *.html
+.deps
+.libs
+.dirstamp
+Makefile
+Makefile.in
+auxdir/
 build_tools/menuselect-deps
+aclocal.m4
+autom4te.cache/
 autoconfig.h
+autoconfig.h.in
 config.log
 config.status
+config.guess
+config.ignore
+configure
 dahdi_cfg
 dahdi_diag
 dahdi_maint
@@ -22,17 +39,19 @@ hdlcgen
 hdlcstress
 hdlctest
 hdlcverify
-libtonezone.a
-libtonezone.so
+libtool
+m4/
 makeopts
 patgen
 patlooptest
 pattest
 sethdlc
+stamp-h1
 timertest
 tonezone.lo
 tonezones.txt
 version.c
+xpp/*.check
 xpp/.depend
 xpp/.octasic.depend
 xpp/.perlcheck

Makefile

@@ -1,390 +0,0 @@
-#
-# Makefile for DAHDI tools
-#
-# Copyright (C) 2001-2010 Digium, Inc.
-#
-#
-
-ifeq ($(strip $(foreach var,clean distclean dist-clean update,$(findstring $(var),$(MAKECMDGOALS)))),)
-endif
-
-ifeq ($(strip $(foreach var,clean distclean dist-clean update,$(findstring $(var),$(MAKECMDGOALS)))),)
- ifneq ($(wildcard makeopts),)
-  include makeopts
- endif
-endif
-
-SUBDIRS_UTILS_ALL:= ppp
-SUBDIRS_UTILS := xpp
-
-OPTFLAGS=-O2
-CFLAGS+=-I. $(OPTFLAGS) -g -fPIC -Wall -DBUILDING_TONEZONE #-DTONEZONE_DRIVER
-ifneq (,$(findstring ppc,$(UNAME_M)))
-CFLAGS+=-fsigned-char
-endif
-ifneq (,$(findstring x86_64,$(UNAME_M)))
-CFLAGS+=-m64
-endif
-
-ifeq ($(DAHDI_DEVMODE),yes)
-  CFLAGS+=-Werror -Wunused -Wundef $(DAHDI_DECLARATION_AFTER_STATEMENT) -Wmissing-format-attribute -Wformat-security #-Wformat=2
-endif
-
-ROOT_PREFIX=
-
-# extra cflags to build dependencies. Recursively expanded.
-MAKE_DEPS= -MD -MT $@ -MF .$(subst /,_,$@).d -MP
-
-CFLAGS+=$(DAHDI_INCLUDE)
-
-CHKCONFIG	:= $(wildcard /sbin/chkconfig)
-UPDATE_RCD	:= $(wildcard /usr/sbin/update-rc.d)
-ifeq (,$(DESTDIR))
-  ifneq (,$(CHKCONFIG))
-    ADD_INITD	:= $(CHKCONFIG) --add dahdi
-  else
-    ifneq (,$(UPDATE_RCD))
-      ADD_INITD	:= $(UPDATE_RCD) dahdi defaults 15 30
-    endif
-  endif
-endif
-
-INITRD_DIR	:= $(firstword $(wildcard $(DESTDIR)/etc/rc.d/init.d $(DESTDIR)/etc/init.d))
-ifneq (,$(INITRD_DIR))
-  INIT_TARGET	:= $(INITRD_DIR)/dahdi
-  COPY_INITD	:= install -D dahdi.init $(INIT_TARGET)
-endif
-
-RCCONF_FILE	= /etc/dahdi/init.conf
-MODULES_FILE	= /etc/dahdi/modules
-GENCONF_FILE	= /etc/dahdi/genconf_parameters
-MODPROBE_FILE	= /etc/modprobe.d/dahdi.conf
-BLACKLIST_FILE	= /etc/modprobe.d/dahdi.blacklist.conf
-BASH_COMP_DIR	= /etc/bash_completion.d
-BASH_COMP_FILE	= $(BASH_COMP_DIR)/dahdi
-
-NETSCR_DIR	:= $(firstword $(wildcard $(DESTDIR)/etc/sysconfig/network-scripts ))
-ifneq (,$(NETSCR_DIR))
-  NETSCR_TARGET	:= $(NETSCR_DIR)/ifup-hdlc
-  COPY_NETSCR	:= install -D ifup-hdlc $(NETSCR_TARGET)
-endif
-
-TOOLSVERSION=$(shell build_tools/make_version . dahdi/tools)
-
-LTZ_A:=libtonezone.a
-LTZ_A_OBJS:=zonedata.o tonezone.o version.o
-LTZ_SO:=libtonezone.so
-LTZ_SO_OBJS:=zonedata.lo tonezone.lo version.o
-LTZ_SO_MAJOR_VER:=2
-LTZ_SO_MINOR_VER:=0
-
-# sbindir, libdir, includedir and mandir are defined in makeopts
-# (from configure).
-BIN_DIR:=$(sbindir)
-LIB_DIR:=$(libdir)
-INC_DIR:=$(includedir)/dahdi
-MAN_DIR:=$(mandir)/man8
-DATA_DIR:=${datadir}/dahdi
-CONFIG_DIR:=$(sysconfdir)/dahdi
-CONFIG_FILE:=$(CONFIG_DIR)/system.conf
-UDEVRULES_DIR:=$(sysconfdir)/udev/rules.d
-
-# Utilities we build with a standard build procedure:
-UTILS		= dahdi_tool dahdi_test dahdi_monitor dahdi_speed sethdlc dahdi_cfg \
-		  fxstest fxotune dahdi_diag dahdi_scan
-
-# some tests:
-UTILS		+= patgen pattest patlooptest hdlcstress hdlctest hdlcgen \
-		   hdlcverify timertest dahdi_maint
-
-
-BINS:=fxotune dahdi_cfg dahdi_monitor dahdi_speed dahdi_test dahdi_scan dahdi_maint
-ifeq	(1,$(PBX_NEWT))
-	BINS	+= dahdi_tool
-endif
-ifeq	(1,$(PBX_HDLC))
-	BINS	+= sethdlc
-endif
-ASSIGNED_DATA_SCRIPTS:=\
-	dahdi_handle_device	\
-	dahdi_span_config	\
-	dahdi_auto_assign_compat	\
-	span_config.d/10-dahdi-cfg	\
-	span_config.d/20-fxotune	\
-	span_config.d/50-asterisk	\
-	handle_device.d/10-span-types	\
-	handle_device.d/20-span-assignments
-
-ASSIGNED_UTILS:=dahdi_span_assignments dahdi_span_types \
-	dahdi_waitfor_span_assignments
-ASSIGNED_CONF:=assigned-spans.conf.sample span-types.conf.sample
-
-MAN_PAGES:= \
-	$(wildcard $(BINS:%=doc/%.8)) \
-	$(wildcard $(ASSIGNED_UTILS:%=doc/%.8))
-
-TEST_BINS:=patgen pattest patlooptest hdlcstress hdlctest hdlcgen hdlcverify timertest dahdi_maint
-# All the man pages. Not just installed ones:
-GROFF_PAGES	:= $(wildcard doc/*.8 xpp/*.8)
-GROFF_HTML	:= $(GROFF_PAGES:%=%.html)
-
-GENERATED_DOCS	:= $(GROFF_HTML) README.html README.Astribank.html
-
-all: prereq programs
-
-libs: $(LTZ_SO) $(LTZ_A)
-
-utils-subdirs:
-	@for dir in $(SUBDIRS_UTILS); do \
-		$(MAKE) -C $$dir; \
-	done
-
-programs: libs utils
-
-utils: $(BINS) utils-subdirs
-
-version.c: FORCE
-	@TOOLSVERSION="${TOOLSVERSION}" build_tools/make_version_c > $@.tmp
-	@if cmp -s $@.tmp $@ ; then :; else \
-		mv $@.tmp $@ ; \
-	fi
-	@rm -f $@.tmp
-
-tests: $(TEST_BINS)
-
-$(UTILS): %: %.o
-
-$(UTILS): version.o
-
-%.o: %.c
-	$(CC) $(CFLAGS) $(MAKE_DEPS) -c -o $@ $<
-
-%.lo: %.c
-	$(CC) $(CFLAGS) $(MAKE_DEPS) -c -o $@ $<
-
-%: %.o
-	$(CC) $(LDFLAGS) $^ $(LIBS) -o $@
-
-prereq: config.status
-
-dahdi_tool: CFLAGS+=$(NEWT_INCLUDE)
-dahdi_tool: LIBS+=$(NEWT_LIB)
-
-dahdi_speed: CFLAGS+=-O0
-
-$(LTZ_A): $(LTZ_A_OBJS)
-	ar rcs $@ $^
-	ranlib $@
-
-$(LTZ_SO): $(LTZ_SO_OBJS)
-	$(CC) $(CFLAGS) -shared -Wl,-soname,$(LTZ_SO).$(LTZ_SO_MAJOR_VER).$(LTZ_SO_MINOR_VER) -o $@ $^ -lm
-
-dahdi_cfg: $(LTZ_A)
-dahdi_cfg: LIBS+=-lm -lpthread
-dahdi_pcap:
-	$(CC) $(CFLAGS) dahdi_pcap.c -lpcap -o $@ $<
-	
-
-fxstest: $(LTZ_SO)
-fxstest: LIBS+=-lm
-fxotune: LIBS+=-lm
-
-tonezones.txt: zonedata.c
-	perl -ne 'next unless (/\.(country|description) = *"([^"]*)/); \
-		print (($$1 eq "country")? "* $$2\t":"$$2\n");' $<  \
-	>$@
-
-%.asciidoc: %.sample
-	perl -n -e \
-		'if (/^#($$|\s)(.*)/){ if (!$$in_doc){print "\n"}; $$in_doc=1; print "$$2\n" } else { if ($$in_doc){print "\n"}; $$in_doc=0; print "  $$_" }' \
-		$< \
-	| perl -p -e 'if (/^  #?(\w+)=/ && ! exists $$cfgs{$$1}){my $$cfg = $$1; $$cfgs{$$cfg} = 1; s/^/\n[[cfg_$$cfg]]\n/}'  >$@
-
-docs: $(GENERATED_DOCS)
-
-genconf_parameters.sample: xpp/genconf_parameters
-	cp $< $@
-
-README.html: README system.conf.asciidoc init.conf.asciidoc tonezones.txt \
-  UPGRADE.txt genconf_parameters.asciidoc assigned-spans.conf.asciidoc \
-  span-types.conf.asciidoc
-	$(ASCIIDOC) -n -a toc -a toclevels=4 $<
-
-README.Astribank.html: xpp/README.Astribank
-	$(ASCIIDOC) -o $@ -n -a toc -a toclevels=4 $<
-
-# on Debian: this requires the full groff, not just groff-base.
-%.8.html: %.8
-	man -Thtml $^ >$@
-
-htmlman: $(GROFF_HTML)
-
-install: all install-programs
-	@echo "###################################################"
-	@echo "###"
-	@echo "### DAHDI tools installed successfully."
-	@echo "### If you have not done so before, install init scripts with:"
-	@echo "###"
-	@echo "###   make config"
-	@echo "###"
-	@echo "###################################################"
-
-install-programs: install-utils install-libs
-
-install-utils: utils install-utils-subdirs
-ifneq (,$(BINS))
-	install -d $(DESTDIR)$(BIN_DIR)
-	install  $(BINS) $(DESTDIR)$(BIN_DIR)/
-	install -d $(DESTDIR)$(MAN_DIR)
-	install -m 644 $(MAN_PAGES) $(DESTDIR)$(MAN_DIR)/
-endif
-ifeq (,$(wildcard $(DESTDIR)$(CONFIG_FILE)))
-	$(INSTALL) -d $(DESTDIR)$(CONFIG_DIR)
-	$(INSTALL) -m 644 system.conf.sample $(DESTDIR)$(CONFIG_FILE)
-endif
-	install -d $(DESTDIR)$(DATA_DIR)
-	tar cf - -C hotplug $(ASSIGNED_DATA_SCRIPTS) | tar xf - -C $(DESTDIR)$(DATA_DIR)/
-	install $(ASSIGNED_UTILS) $(DESTDIR)/$(BIN_DIR)/
-	install -m 644 $(ASSIGNED_CONF) $(DESTDIR)/$(CONFIG_DIR)/
-	install -d $(DESTDIR)$(BASH_COMP_DIR)
-	install -m 644 dahdi-bash-completion $(DESTDIR)$(BASH_COMP_FILE)
-
-install-libs: libs
-	$(INSTALL) -d -m 755 $(DESTDIR)/$(LIB_DIR)
-	$(INSTALL) -m 755 $(LTZ_A) $(DESTDIR)$(LIB_DIR)/
-	$(INSTALL) -m 755 $(LTZ_SO) $(DESTDIR)$(LIB_DIR)/$(LTZ_SO).$(LTZ_SO_MAJOR_VER).$(LTZ_SO_MINOR_VER)
-ifeq (,$(DESTDIR))
-	if [ `id -u` = 0 ]; then \
-		/sbin/ldconfig || : ;\
-	fi
-endif
-	rm -f $(DESTDIR)$(LIB_DIR)/$(LTZ_SO)
-	$(LN) -sf $(LTZ_SO).$(LTZ_SO_MAJOR_VER).$(LTZ_SO_MINOR_VER) \
-		$(DESTDIR)$(LIB_DIR)/$(LTZ_SO).$(LTZ_SO_MAJOR_VER)
-	$(LN) -sf $(LTZ_SO).$(LTZ_SO_MAJOR_VER).$(LTZ_SO_MINOR_VER) \
-		$(DESTDIR)$(LIB_DIR)/$(LTZ_SO)
-	# Overwrite the 1.0 links out there.  dahdi-tools 2.0.0 installed
-	# 1.0 links but dahdi-tools changed them to 2.0 in order to explicitly
-	# break applications linked with zaptel.  But, this also meant that
-	# applications linked with libtonezone.so.1.0 broke when dahdi-tools
-	# 2.1.0 was installed.
-	$(LN) -sf $(LTZ_SO).$(LTZ_SO_MAJOR_VER).$(LTZ_SO_MINOR_VER) \
-		$(DESTDIR)$(LIB_DIR)/$(LTZ_SO).1.0
-	$(LN) -sf $(LTZ_SO).$(LTZ_SO_MAJOR_VER).$(LTZ_SO_MINOR_VER) \
-		$(DESTDIR)$(LIB_DIR)/$(LTZ_SO).1
-ifneq (no,$(USE_SELINUX))
-  ifeq (,$(DESTDIR))
-	/sbin/restorecon -v $(DESTDIR)$(LIB_DIR)/$(LTZ_SO)
-  endif
-endif
-	$(INSTALL) -d -m 755 $(DESTDIR)/$(INC_DIR)
-	$(INSTALL) -m 644 tonezone.h $(DESTDIR)$(INC_DIR)/
-
-install-utils-subdirs:
-	@for dir in $(SUBDIRS_UTILS); do \
-		$(MAKE) -C $$dir install; \
-	done
-
-install-tests: tests
-ifneq (,$(TEST_BINS))
-	install -d $(DESTDIR)$(BIN_DIR)
-	install  $(TEST_BINS) $(DESTDIR)$(BIN_DIR)/
-endif
-
-config:
-ifneq (,$(COPY_INITD))
-	$(COPY_INITD)
-endif
-ifeq (,$(wildcard $(DESTDIR)$(RCCONF_FILE)))
-	$(INSTALL) -D -m 644 init.conf.sample $(DESTDIR)$(RCCONF_FILE)
-endif
-ifeq (,$(wildcard $(DESTDIR)$(MODULES_FILE)))
-	$(INSTALL) -D -m 644 modules.sample $(DESTDIR)$(MODULES_FILE)
-endif
-ifeq (,$(wildcard $(DESTDIR)$(GENCONF_FILE)))
-	$(INSTALL) -D -m 644 xpp/genconf_parameters $(DESTDIR)$(GENCONF_FILE)
-endif
-ifeq (,$(wildcard $(DESTDIR)$(MODPROBE_FILE)))
-	$(INSTALL) -D -m 644 modprobe.conf.sample $(DESTDIR)$(MODPROBE_FILE)
-endif
-ifeq (,$(wildcard $(DESTDIR)$(BLACKLIST_FILE)))
-	$(INSTALL) -D -m 644 blacklist.sample $(DESTDIR)$(BLACKLIST_FILE)
-endif
-	$(INSTALL) -d $(DESTDIR)$(UDEVRULES_DIR)
-	$(INSTALL) -D -m 644 dahdi.rules $(DESTDIR)$(UDEVRULES_DIR)/
-ifneq (,$(COPY_NETSCR))
-	$(COPY_NETSCR)
-endif
-ifneq (,$(ADD_INITD))
-	$(ADD_INITD)
-endif
-	@echo "DAHDI has been configured."
-	@echo ""
-	@echo "List of detected DAHDI devices:"
-	@echo ""
-	@if [ `xpp/dahdi_hardware | tee /dev/stderr | wc -l` -eq 0 ]; then \
-		echo "No hardware found"; \
-	else \
-		echo ""; \
-		echo "run 'dahdi_genconf modules' to load support for only " ;\
-		echo "the DAHDI hardware installed in this system.  By "; \
-		echo "default support for all DAHDI hardware is loaded at "; \
-		echo "DAHDI start. "; \
-	fi
-
-update:
-	@if [ -d .svn ]; then \
-		echo "Updating from Subversion..." ; \
-		svn update | tee update.out; \
-		rm -f .version; \
-		if [ `grep -c ^C update.out` -gt 0 ]; then \
-			echo ; echo "The following files have conflicts:" ; \
-			grep ^C update.out | cut -b4- ; \
-		fi ; \
-		rm -f update.out; \
-	else \
-		echo "Not under version control";  \
-	fi
-
-dist:
-	@./build_tools/make_dist "dahdi-tools" "$(TOOLSVERSION)"
-
-clean:
-	rm -f $(BINS) $(TEST_BINS)
-	rm -f *.o dahdi_cfg tzdriver sethdlc
-	rm -f $(LTZ_SO) $(LTZ_A) *.lo
-	@for dir in $(SUBDIRS_UTILS_ALL); do \
-		$(MAKE) -C $$dir clean; \
-	done
-	@for dir in $(SUBDIRS_UTILS); do \
-		$(MAKE) -C $$dir clean; \
-	done
-	rm -f libtonezone*
-	rm -f fxotune
-	rm -f core
-	rm -f dahdi_cfg-shared fxstest
-	rm -rf $(GENERATED_DOCS) *.asciidoc tonezones.txt
-	rm -f dahdi_pcap
-
-distclean: dist-clean
-
-dist-clean: clean
-	rm -f makeopts
-	rm -f config.log config.status
-	rm -f .*.d
-
-config.status: configure
-	@CFLAGS="" ./configure
-	@echo "****"
-	@echo "**** The configure script was just executed, so 'make' needs to be"
-	@echo "**** restarted."
-	@echo "****"
-	@exit 1
-
-.PHONY: distclean dist-clean clean all install programs tests devel data config update install-programs install-libs install-utils-subdirs utils-subdirs prereq dist
-
-FORCE:
-
-ifneq ($(wildcard .*.d),)
-   include .*.d
-endif

Makefile.am

@@ -0,0 +1,196 @@
+ACLOCAL_AMFLAGS	= -I m4
+
+LEGACY_MAKE	= \
+	 $(MAKE) -f $(srcdir)/Makefile.legacy \
+		top_srcdir=$(top_srcdir) \
+		srcdir=$(srcdir)
+
+CFLAGS	= -g -Wall -O2 $(DAHDI_INCLUDE)
+if DAHDI_DEVMODE
+CFLAGS	+= \
+	-Werror \
+	-Wunused \
+	-Wundef \
+	$(DAHDI_DECLARATION_AFTER_STATEMENT) \
+	-Wmissing-format-attribute \
+	-Wformat-security \
+	#-Wformat=2
+endif
+
+SUBDIRS	= xpp doc hotplug
+
+if PPPD
+SUBDIRS	+= ppp
+endif
+
+noinst_HEADERS	= \
+	bittest.h	\
+	dahdi_tools_version.h	\
+	fxotune.h	\
+	wavformat.h	\
+	#
+
+sbin_PROGRAMS	= \
+	dahdi_test \
+	dahdi_maint \
+	dahdi_monitor \
+	dahdi_cfg \
+	dahdi_speed \
+	dahdi_scan \
+	fxotune
+
+noinst_PROGRAMS	= \
+	fxstest \
+	patgen \
+	pattest \
+	patlooptest \
+	dahdi_diag \
+	timertest
+
+dist_sbin_SCRIPTS	= \
+	dahdi_span_assignments \
+	dahdi_waitfor_span_assignments \
+	dahdi_span_types
+
+if PBX_HDLC
+sbin_PROGRAMS	+= sethdlc
+noinst_PROGRAMS += hdlcstress hdlctest hdlcgen hdlcverify
+endif
+
+# Libtool versioning for libtonezone:
+# Bump when interface changes
+LTZ_CURRENT	= 2
+# Bump if interface change is backward compatible
+LTZ_AGE		= 0
+# Bump if only implementation change
+LTZ_REVISION	= 0
+
+lib_LTLIBRARIES		= libtonezone.la
+
+libtonezone_la_SOURCES	= \
+	zonedata.c \
+	tonezone.c \
+	version.c
+dahdiinclude_HEADERS	= tonezone.h
+libtonezone_la_CFLAGS	= $(CFLAGS) -I$(srcdir) -DBUILDING_TONEZONE
+libtonezone_la_LDFLAGS	= -version-info "$(LTZ_CURRENT):$(LTZ_REVISION):$(LTZ_AGE)"
+
+if PBX_PCAP
+noinst_PROGRAMS		+= dahdi_pcap
+dahdi_pcap_LDADD	= -lpcap
+endif
+
+patlooptest_LDADD	= libtonezone.la -lm
+fxstest_LDADD		= libtonezone.la -lm
+fxotune_LDADD		= -lm
+dahdi_speed_CFLAGS	= -O2
+
+dahdi_maint_SOURCES	= dahdi_maint.c version.c
+
+if PBX_NEWT
+sbin_PROGRAMS		+= dahdi_tool
+dahdi_tool_CFLAGS	= $(CFLAGS) $(NEWT_INCLUDE)
+dahdi_tool_LDADD	= $(NEWT_LIB)
+endif
+
+dahdi_cfg_LDFLAGS	= -lm -lpthread
+dahdi_cfg_LDADD		= libtonezone.la
+
+udevrulesdir	= @udevrulesdir@
+udevrules_DATA	= dahdi.rules
+
+all-local:
+	$(LEGACY_MAKE)  all
+
+clean-local:
+	$(LEGACY_MAKE) clean
+
+install-exec-hook:
+	$(LEGACY_MAKE) install
+	@echo "Compatibility symlinks (should be removed in the future)"
+	ln -sf libtonezone.so.2.0.0 $(DESTDIR)$(libdir)/libtonezone.so.2.0
+
+bashcompdir	= $(sysconfdir)/bash_completion.d
+
+install-data-hook:
+	mkdir -p $(DESTDIR)$(bashcompdir)
+	install -m 644 $(srcdir)/dahdi-bash-completion $(DESTDIR)$(bashcompdir)/dahdi
+
+# Handle these files specially -- install them only with 'install-config'
+special_config_files	= \
+	init.conf.sample	\
+	blacklist.sample	\
+	modprobe.conf.sample	\
+	#
+
+install-config:
+	mkdir -p $(DESTDIR)$(dahdiconfdir)
+	mkdir -p $(DESTDIR)$(sysconfdir)/modprobe.d
+	install -m644 xpp/genconf_parameters $(DESTDIR)$(dahdiconfdir)/genconf_parameters
+	install -m644 init.conf.sample $(DESTDIR)$(dahdiconfdir)/init.conf
+	install -m644 blacklist.sample $(DESTDIR)$(sysconfdir)/modprobe.d/dahdi-blacklist.conf
+	install -m644 modprobe.conf.sample $(DESTDIR)$(sysconfdir)/modprobe.d/dahdi.conf
+	$(LEGACY_MAKE) config
+
+dahdiconfdir	= @sysconfdir@/dahdi
+dahdiconf_DATA	= \
+	system.conf.sample	\
+	assigned-spans.conf.sample	\
+	span-types.conf.sample	\
+	modules.sample	\
+	#
+
+build_scripts	= \
+	build_tools/dahdi_svn_tarball	\
+	build_tools/dahdi_sysfs_copy	\
+	build_tools/dump_sys_state	\
+	build_tools/make_firmware_object.in	\
+	build_tools/make_tree	\
+	build_tools/make_version	\
+	build_tools/test_kernel_git	\
+	build_tools/uninstall-modules	\
+	#
+
+.version:
+	if ./build_tools/make_version . dahdi/tools > $@.tmp; then \
+		mv "$@.tmp" "$@"; \
+	fi
+
+uninstall-hook:
+	$(RM) $(DESTDIR)$(sysconfdir)/dahdi/span-types.conf.sample
+	$(RM) $(DESTDIR)$(sysconfdir)/dahdi/assigned-spans.conf.sample
+	$(RM) $(DESTDIR)$(sysconfdir)/dahdi/system.conf
+	$(RM) $(DESTDIR)$(bashcompdir)/dahdi
+
+docs:
+	$(LEGACY_MAKE)  $@
+
+DISTCLEANFILES	= makeopts config.log config.status .*.d
+
+MAINTAINERCLEANFILES	= \
+		m4/libtool.m4 \
+		m4/ltoptions.m4 \
+		m4/ltsugar.m4 \
+		m4/ltversion.m4 \
+		m4/lt~obsolete.m4 \
+		#
+
+EXTRA_DIST	= \
+	.version	\
+	LICENSE	\
+	LICENSE.LGPL	\
+	UPGRADE.txt	\
+	bootstrap.sh	\
+	Makefile.legacy	\
+	dahdi.init	\
+	dahdi.xml	\
+	dahdi_pcap.c	\
+	ifup-hdlc	\
+	dahdi-bash-completion	\
+	$(special_config_files)	\
+	$(dahdiconf_DATA)	\
+	$(udevrules_DATA)	\
+	$(build_scripts)	\
+	#
+
+.PHONY: docs config

Makefile.legacy

@@ -0,0 +1,133 @@
+#
+# Makefile for DAHDI tools
+#
+# Copyright (C) 2001-2010 Digium, Inc.
+#
+#
+
+ifeq ($(strip $(foreach var,clean,$(findstring $(var),$(MAKECMDGOALS)))),)
+endif
+
+ifeq ($(strip $(foreach var,clean,$(findstring $(var),$(MAKECMDGOALS)))),)
+ ifneq ($(wildcard makeopts),)
+  include makeopts
+ endif
+endif
+
+CHKCONFIG	:= $(wildcard /sbin/chkconfig)
+UPDATE_RCD	:= $(wildcard /usr/sbin/update-rc.d)
+ifeq (,$(DESTDIR))
+  ifneq (,$(CHKCONFIG))
+    ADD_INITD	:= $(CHKCONFIG) --add dahdi
+  else
+    ifneq (,$(UPDATE_RCD))
+      ADD_INITD	:= $(UPDATE_RCD) dahdi defaults 15 30
+    endif
+  endif
+endif
+
+INITRD_DIR	:= $(firstword $(wildcard $(DESTDIR)/etc/rc.d/init.d $(DESTDIR)/etc/init.d))
+ifneq (,$(INITRD_DIR))
+  INIT_TARGET	:= $(INITRD_DIR)/dahdi
+  COPY_INITD	:= install -D dahdi.init $(INIT_TARGET)
+endif
+
+NETSCR_DIR	:= $(firstword $(wildcard $(DESTDIR)/etc/sysconfig/network-scripts ))
+ifneq (,$(NETSCR_DIR))
+  NETSCR_TARGET	:= $(NETSCR_DIR)/ifup-hdlc
+  COPY_NETSCR	:= install -D ifup-hdlc $(NETSCR_TARGET)
+endif
+
+# sbindir, libdir, includedir and mandir are defined in makeopts
+# (from configure).
+LIB_DIR:=$(libdir)
+
+# All the man pages. Not just installed ones:
+GROFF_PAGES	:= $(wildcard doc/*.8 xpp/*.8)
+GROFF_HTML	:= $(GROFF_PAGES:%=%.html)
+
+GENERATED_DOCS	:= $(GROFF_HTML) README.html README.Astribank.html
+
+all:
+
+tonezones.txt: zonedata.c
+	perl -ne 'next unless (/\.(country|description) = *"([^"]*)/); \
+		print (($$1 eq "country")? "* $$2\t":"$$2\n");' $<  \
+	>$@
+
+%.asciidoc: %.sample
+	perl -n -e \
+		'if (/^#($$|\s)(.*)/){ if (!$$in_doc){print "\n"}; $$in_doc=1; print "$$2\n" } else { if ($$in_doc){print "\n"}; $$in_doc=0; print "  $$_" }' \
+		$< \
+	| perl -p -e 'if (/^  #?(\w+)=/ && ! exists $$cfgs{$$1}){my $$cfg = $$1; $$cfgs{$$cfg} = 1; s/^/\n[[cfg_$$cfg]]\n/}'  >$@
+
+docs: $(GENERATED_DOCS)
+
+genconf_parameters.sample: xpp/genconf_parameters
+	cp $< $@
+
+README.html: README system.conf.asciidoc init.conf.asciidoc tonezones.txt \
+  UPGRADE.txt genconf_parameters.asciidoc assigned-spans.conf.asciidoc \
+  span-types.conf.asciidoc
+	$(ASCIIDOC) -n -a toc -a toclevels=4 $<
+
+README.Astribank.html: xpp/README.Astribank
+	$(ASCIIDOC) -o $@ -n -a toc -a toclevels=4 $<
+
+# on Debian: this requires the full groff, not just groff-base.
+%.8.html: %.8
+	man -Thtml $^ >$@
+
+htmlman: $(GROFF_HTML)
+
+install: all install-programs
+	@echo "###################################################"
+	@echo "###"
+	@echo "### DAHDI tools installed successfully."
+	@echo "### If you have not done so before, install init scripts with:"
+	@echo "###"
+	@echo "###   make config"
+	@echo "###"
+	@echo "###################################################"
+
+install-programs: install-libs
+
+install-libs:
+ifneq (no,$(USE_SELINUX))
+  ifeq (,$(DESTDIR))
+	/sbin/restorecon -v $(DESTDIR)$(LIB_DIR)/$(LTZ_SO)
+  endif
+endif
+
+config:
+ifneq (,$(COPY_INITD))
+	$(COPY_INITD)
+endif
+ifneq (,$(COPY_NETSCR))
+	$(COPY_NETSCR)
+endif
+ifneq (,$(ADD_INITD))
+	$(ADD_INITD)
+endif
+	@echo "DAHDI has been configured."
+	@echo ""
+	@echo "List of detected DAHDI devices:"
+	@echo ""
+	@if [ `xpp/dahdi_hardware | tee /dev/stderr | wc -l` -eq 0 ]; then \
+		echo "No hardware found"; \
+	else \
+		echo ""; \
+		echo "run 'dahdi_genconf modules' to load support for only " ;\
+		echo "the DAHDI hardware installed in this system.  By "; \
+		echo "default support for all DAHDI hardware is loaded at "; \
+		echo "DAHDI start. "; \
+	fi
+
+clean:
+	rm -f *.o tzdriver
+	rm -f core
+	rm -rf $(GENERATED_DOCS) *.asciidoc tonezones.txt
+
+.PHONY: clean all install devel data config install-programs install-libs
+
+FORCE:

README

@@ -15,8 +15,9 @@ dahdi-linux before building dahdi-tools.
 Build System
 ~~~~~~~~~~~~
 GCC and friends. Generally you will need to install the package gcc.
-There may be cases where you will need a specific version of gcc to build
-kernel modules.
+
+Autotools (autoconf, automake and libtool) are needed if you clone from
+Git.
 
 
 Extra Libraries
@@ -24,20 +25,25 @@ Extra Libraries
 Some libraries are needed for extra utilities that are provided with
 DAHDI.
 
-- libusb is needed for building fpga_load, needed for firmware loading of
-  the Xorcom Astribank.
+- libusb is needed for building astribank_hexload, needed for firmware
+  loading of the Xorcom Astribank.
 - libnewt is needed to build the optional but useful utility dahdi_tool.
+- libpcap is needed for building dahdi_pcap.
+- pppd is needed to build the dahdi pppd plugin.
 
 
 Installation
 ~~~~~~~~~~~~
 Note: If using `sudo` to build/install, you may need to add /sbin to your PATH.
 ----------------------------------
+# Only if you cloned from git:
+autoreconf -i
+
 ./configure
 make
 make install
-# To install init scripts and config files:
-#make config
+# To install some extra configuration files:
+#make install-config
 ----------------------------------
 
 
@@ -49,18 +55,11 @@ There are some make targets that are provided to build or install just
 parts of DAHDI:
 
 . Build targets:
-  - make: Build DAHDI user-space programs and libraries. partial
-    targets of it:
-    * make 'utilname': builds 'utilname' alone (e.g: `make dahdi_diag`)
-    * make utils: Build just the programs.
-    * make libs: Build libtonezone.
-    * make tests: Build testing binaries.
+  - make: Build DAHDI user-space programs and libraries.
+  - make docs: Generate some extra documentation files.
 . Install targets:
-  - make install: Install everything. Sub-targets of it:
-    * make install-utils: Installs most things.
-    * make install-libs: Installs libtonezone.
-  - make config: install configuration files (overriding existing ones).
-  - make install-test: Install testing binaries.
+  - make install: Install everything
+  - make install-config: install configuration files
 
 
 Installation to a Subtree
@@ -76,8 +75,8 @@ This can be useful for any partial install target from the list above.
 
 Options For ./configure
 ^^^^^^^^^^^^^^^^^^^^^^^
-The configure script executes various tests and based on them generates
-makeopts. You can pass it --with options and variable settings, for
+The configure script executes various tests and the build will depend on
+their result. You can pass it --with options and variable settings, for
 instance:
 
   ./configure --without-ncurses CC="gcc-4.10"
@@ -117,6 +116,29 @@ The configuration file of the dahdi init.d script is
 /etc/dahdi/init.conf . That file is used to override defaults that are 
 set at the beginning of the init.d script.
 
+/etc/dahdi/assigned-spans.conf
+~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+Assigns span number and initial channel number for spans in each device.
+Just like system.conf it may be generated with dahdi_genconf:
+
+  dahdi_span_assignments auto
+  dahdi_genconf
+
+It may also be edited manually to allow reserving span and channel
+numbers for specific devices.
+
+/etc/dahdi/span-types.conf
+~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+Theoretically, this file is similar to assigned-spans.conf. It allows
+setting the type (E1/T1) of a "PRI" span. This cannot be configured
+anywhere else: it needs to be done before the span is assigned as it
+changes the number of channels the span has.
+
+In practice most systems don't mix E1 and T1 and thus this file will
+typically have at most a single wild-card line setting all cards to be
+either E1 or T1.
+
+
 Reference Configuration
 ~~~~~~~~~~~~~~~~~~~~~~~
 Sample system.conf

autoconfig.h.in

@@ -1,114 +0,0 @@
-/* autoconfig.h.in.  Generated from configure.ac by autoheader.  */
-
-/* Define if your system has the DAHDI headers. */
-#undef HAVE_DAHDI
-
-/* Define if your system has the DAHDI23 headers. */
-#undef HAVE_DAHDI23
-
-/* Define DAHDI23 headers version */
-#undef HAVE_DAHDI23_VERSION
-
-/* Define DAHDI headers version */
-#undef HAVE_DAHDI_VERSION
-
-/* Define to 1 if you have the <inttypes.h> header file. */
-#undef HAVE_INTTYPES_H
-
-/* Define to 1 if you have the <linux/soundcard.h> header file. */
-#undef HAVE_LINUX_SOUNDCARD_H
-
-/* Define to 1 if you have the <memory.h> header file. */
-#undef HAVE_MEMORY_H
-
-/* Define this to indicate the ${NEWT_DESCRIP} library */
-#undef HAVE_NEWT
-
-/* Define to indicate the ${NEWT_DESCRIP} library version */
-#undef HAVE_NEWT_VERSION
-
-/* Define to 1 if you have the `semtimedop' function. */
-#undef HAVE_SEMTIMEDOP
-
-/* Define to 1 if you have the <stdint.h> header file. */
-#undef HAVE_STDINT_H
-
-/* Define to 1 if you have the <stdlib.h> header file. */
-#undef HAVE_STDLIB_H
-
-/* Define to 1 if you have the <strings.h> header file. */
-#undef HAVE_STRINGS_H
-
-/* Define to 1 if you have the <string.h> header file. */
-#undef HAVE_STRING_H
-
-/* Define to 1 if you have the <sys/soundcard.h> header file. */
-#undef HAVE_SYS_SOUNDCARD_H
-
-/* Define to 1 if you have the <sys/stat.h> header file. */
-#undef HAVE_SYS_STAT_H
-
-/* Define to 1 if you have the <sys/types.h> header file. */
-#undef HAVE_SYS_TYPES_H
-
-/* Define to 1 if you have the <unistd.h> header file. */
-#undef HAVE_UNISTD_H
-
-/* Define this to indicate the ${USB_DESCRIP} library */
-#undef HAVE_USB
-
-/* Define to indicate the ${USB_DESCRIP} library version */
-#undef HAVE_USB_VERSION
-
-/* Define to the address where bug reports for this package should be sent. */
-#undef PACKAGE_BUGREPORT
-
-/* Define to the full name of this package. */
-#undef PACKAGE_NAME
-
-/* Define to the full name and version of this package. */
-#undef PACKAGE_STRING
-
-/* Define to the one symbol short name of this package. */
-#undef PACKAGE_TARNAME
-
-/* Define to the home page for this package. */
-#undef PACKAGE_URL
-
-/* Define to the version of this package. */
-#undef PACKAGE_VERSION
-
-/* Define to 1 if you have the ANSI C header files. */
-#undef STDC_HEADERS
-
-/* Enable extensions on AIX 3, Interix.  */
-#ifndef _ALL_SOURCE
-# undef _ALL_SOURCE
-#endif
-/* Enable GNU extensions on systems that have them.  */
-#ifndef _GNU_SOURCE
-# undef _GNU_SOURCE
-#endif
-/* Enable threading extensions on Solaris.  */
-#ifndef _POSIX_PTHREAD_SEMANTICS
-# undef _POSIX_PTHREAD_SEMANTICS
-#endif
-/* Enable extensions on HP NonStop.  */
-#ifndef _TANDEM_SOURCE
-# undef _TANDEM_SOURCE
-#endif
-/* Enable general extensions on Solaris.  */
-#ifndef __EXTENSIONS__
-# undef __EXTENSIONS__
-#endif
-
-
-/* Define to 1 if on MINIX. */
-#undef _MINIX
-
-/* Define to 2 if the system does not provide POSIX.1 features except with
-   this defined. */
-#undef _POSIX_1_SOURCE
-
-/* Define to 1 if you need to in order for `stat' and other things to work. */
-#undef _POSIX_SOURCE

build_tools/make_dist

@@ -1,26 +0,0 @@
-#! /bin/sh
-
-if [ "$#" -ne 2 ]; then
-	echo >&2 "Usage: $0 <package> <version>"
-	exit 1
-fi
-package="$1"
-version="$2"
-tarball_prefix="$package-$version"
-echo "I: Making dist tarball for $tarball_prefix"
-tarball_name="$tarball_prefix.tar.gz"
-
-tmp_work_dir=".tmp"
-tmp_version_dir="$tmp_work_dir/$tarball_prefix"
-
-if [ "$DESTDIR" != '' ]; then
-	destdir="$DESTDIR/"
-fi
-output="$destdir$tarball_name"
-
-mkdir -p "$tmp_version_dir"
-git archive --format tar HEAD | tar xf - -C "$tmp_version_dir"
-echo "$version" > "$tmp_version_dir/.version"
-tar czf "$output" -C "$tmp_work_dir" "$tarball_prefix"
-rm -rf "$tmp_work_dir"
-echo "I: tarball is ready: '$output'"

build_tools/make_version_c

@@ -1,10 +0,0 @@
-#!/bin/sh
-cat << END
-/*
- * version.c
- * Automatically generated
- */
-
-const char dahdi_tools_version[] = "DAHDI Tools Version - ${TOOLSVERSION}";
-
-END

configure.ac

@@ -2,29 +2,65 @@
 
 AC_PREREQ(2.59)
  
-m4_define([TOOLSVERSION],
+m4_define([short_version],
           m4_bpatsubst(m4_esyscmd([build_tools/make_version . dahdi/tools]),
                        [\([0-9.]*\)\(\w\|\W\)*],
                        [\1]))
-AC_INIT(dahdi, TOOLSVERSION, www.asterisk.org)
+AC_INIT([dahdi-tools], short_version, [www.asterisk.org])
 
 # check existence of the package
 AC_CONFIG_SRCDIR([dahdi_cfg.c])
+AC_CONFIG_AUX_DIR([auxdir])
+AC_CONFIG_MACRO_DIR([m4])
+AM_INIT_AUTOMAKE([foreign subdir-objects])
+
+build_version=`build_tools/make_version . dahdi/tools`
+AC_SUBST([BUILD_VERSION], "$build_version")
+
+# enable nice build output on automake1.11
+m4_pattern_allow([AM_DEFAULT_VERBOSITY])
+m4_ifdef([AM_SILENT_RULES],[AM_SILENT_RULES([yes])],[AM_DEFAULT_VERBOSITY=1])
+AM_CONDITIONAL([SILENT_RULES], [test "$AM_DEFAULT_VERBOSITY" = '0'])
 
 AC_COPYRIGHT("dahdi-tools")
 AC_REVISION($Revision$)
 
-ac_default_prefix=/usr
-if test ${sysconfdir} = '${prefix}/etc'; then
-   sysconfdir=/etc
-fi
-if test ${mandir} = '${prefix}/man'; then
-   mandir=/usr/share/man
-fi
+# Preserve old defaults if called without --prefix or --prefix=/usr
+#  prefix=/usr
+#  sysconfdir=/etc
 
-if test ${localstatedir} = '${prefix}/var'; then
-     localstatedir=/var
+ac_default_prefix=/usr
+if test "$prefix" = 'NONE' -o "$prefix" = '/usr'; then
+	if test ${sysconfdir} = '${prefix}/etc'; then
+	   sysconfdir=/etc
+	fi
+	if test ${mandir} = '${prefix}/man'; then
+	   mandir=/usr/share/man
+	fi
+
+	if test ${localstatedir} = '${prefix}/var'; then
+	     localstatedir=/var
+	fi
 fi
+AC_SUBST([dahditoolsdir], ['${datadir}/dahdi'])
+AC_SUBST([dahdiincludedir], ['${includedir}/dahdi'])
+
+# Where to install udev rules?
+#  * Our default is $sysconfdir/udev/rules.d:
+#    - This preserve legacy location.
+#    - It doesn't write into modern vendor supplied location (/lib/udev/rules.d)
+#    - It doesn't break "make distcheck" (where everything should be relative
+#      to prefix.
+#  * Packagers are encouraged to use --udevrules=/lib/udev/rules.d
+#
+m4_define([_UDEV_RULES_DIR_DEFAULT], [${sysconfdir}/udev/rules.d])dnl
+AC_ARG_WITH(udevrules,
+	[AS_HELP_STRING([--with-udevrules=PATH],
+		[Location of UDEV rules @<:@default=]_UDEV_RULES_DIR_DEFAULT[@:>@])],
+	[udevrulesdir=$withval],
+	[udevrulesdir=]'_UDEV_RULES_DIR_DEFAULT'
+)
+AC_SUBST([udevrulesdir], "$udevrulesdir")
 
 # specify output header file
 AC_CONFIG_HEADER(autoconfig.h)
@@ -37,10 +73,15 @@ AC_CHECK_HEADERS([sys/soundcard.h linux/soundcard.h])
 AC_CHECK_TOOL([LD], [ld])
 
 # Checks for programs.
+AC_PROG_CXX
 AC_PROG_CC
 AC_PROG_CPP
+AM_PROG_CC_C_O
 AC_PROG_INSTALL
 AC_PROG_LN_S
+AC_PROG_MAKE_SET
+AC_PROG_AWK
+AC_PROG_LIBTOOL
 AST_CHECK_GNU_MAKE
 
 test_obj=conftest.o
@@ -70,6 +111,35 @@ AC_SUBST(DOWNLOAD)
 
 AC_LANG(C)
 
+AC_PATH_PROG([PERL], [perl])
+if test "$PERL" = ''; then
+	      AC_MSG_ERROR(perl is mandatory)
+fi
+# Where to install perl modules?
+#  * Packagers are encouraged to use the result of "perl -V:vendorlib"
+#  * Our default is:
+#    - The result of "perl -V:sitelib" for our default prefix (/usr)
+#    - The "$datadir/perl5" directory otherwise (e.g: during "make distcheck")
+#
+AC_MSG_CHECKING(for perl libdir)
+m4_define([_PERL_LIBDIR_DEFAULT], [${datadir}/perl5])dnl
+AC_ARG_WITH(perllib,
+	[AS_HELP_STRING([--with-perllib=PATH],
+		[Location of perl modules @<:@default=]_PERL_LIBDIR_DEFAULT[, or perl -V:sitelib@:>@])],
+	[perllibdir=$withval],
+	[
+		if test "$prefix" = 'NONE' -o "$prefix" = '/usr'; then
+			eval `"$PERL" -V:sitelib`
+			perllibdir="$sitelib"
+		else
+			perllibdir='_PERL_LIBDIR_DEFAULT'
+		fi
+	]
+)
+AC_SUBST([perllibdir], "$perllibdir")
+AC_MSG_RESULT([$perllibdir])
+AM_CONDITIONAL([PERL], [test "$perllibdir" != ''])
+
 AC_ARG_ENABLE(dev-mode,
 	[  --enable-dev-mode    Turn on developer mode],
 	[case "${enableval}" in
@@ -78,6 +148,7 @@ AC_ARG_ENABLE(dev-mode,
 	      *) AC_MSG_ERROR(bad value ${enableval} for --enable-dev-mode)  ;;
 	esac])
 AC_SUBST(DAHDI_DEVMODE)
+AM_CONDITIONAL([DAHDI_DEVMODE], [test "$DAHDI_DEVMODE" = 'yes'])
 
 AC_MSG_CHECKING(for -Wdeclaration-after-statement support)
 if $(${CC} -Wdeclaration-after-statement -S -o /dev/null -xc /dev/null > /dev/null 2>&1); then
@@ -92,12 +163,22 @@ AC_SUBST(DAHDI_DECLARATION_AFTER_STATEMENT)
 AST_EXT_LIB_SETUP([DAHDI], [DAHDI], [dahdi])
 AST_EXT_LIB_SETUP([NEWT], [newt], [newt])
 AST_EXT_LIB_SETUP([USB], [usb], [usb])
+AST_EXT_LIB_SETUP([PCAP], [pcap], [pcap])
 
 AST_C_DEFINE_CHECK([DAHDI], [DAHDI_CODE], [dahdi/user.h])
 DAHDI23_DIR="${DAHDI_DIR}"
 AST_C_DEFINE_CHECK([DAHDI23], [DAHDI_CONFIG_NTTE], [dahdi/user.h])
 AST_EXT_LIB_CHECK([NEWT], [newt], [newtBell], [newt.h])
 AST_EXT_LIB_CHECK([USB], [usb], [usb_init], [usb.h])
+AST_EXT_LIB_CHECK([PCAP], [pcap], [pcap_compile], [pcap.h])
+
+saved_CPPFLAGS="$CPPFLAGS"
+CPPFLAGS="$CPPFLAGS $DAHDI_INCLUDE"
+AC_CHECK_DECL([DAHDI_TXMIRROR], [DAHDI_TXMIRROR=1], [DAHDI_TXMIRROR=0], [#include <dahdi/user.h>])
+CPPFLAGS="$saved_CPPFLAGS"
+
+AM_CONDITIONAL([PBX_NEWT], [test "$PBX_NEWT" = "1"])
+AM_CONDITIONAL([PBX_PCAP], [test "$PBX_PCAP" = "1" -a "$DAHDI_TXMIRROR" = "1"])
 
 AC_CHECK_FUNCS([semtimedop])
 
@@ -138,6 +219,7 @@ if test "x${PBX_HDLC}" != "x1"; then
 fi
 
 AC_SUBST(PBX_HDLC)
+AM_CONDITIONAL([PBX_HDLC], [test "$PBX_HDLC" = "1"])
 
 AC_ARG_WITH(selinux,
 	[AS_HELP_STRING([--with-selinux],
@@ -193,6 +275,9 @@ case "$with_ppp" in
 	;;
 esac
 
+AC_SUBST(PPPD_VERSION)
+AM_CONDITIONAL([PPPD], [test "$PPPD_VERSION" != ''])
+
 if test "x${PBX_DAHDI}" != "x1"; then
    AC_MSG_NOTICE([***])
    AC_MSG_NOTICE([*** Building this package requires DAHDI support. *** ])
@@ -211,7 +296,27 @@ fi
 
 AC_SUBST(PPPD_VERSION)
 
-AC_CONFIG_FILES([makeopts])
+AM_CONDITIONAL([PBX_USB], [test "$PBX_USB" = "1"])
+
+# Taken from octasic-helper
+AC_SUBST([USE_OCTASIC], [yes])
+AM_CONDITIONAL([USE_OCTASIC], [test "$USE_OCTASIC" = 'yes'])
+octasic_dir='$(top_srcdir)/xpp/oct612x'
+AC_SUBST([OCTASIC_CFLAGS], ["-I$octasic_dir/include -I$octasic_dir/octdeviceapi -I$octasic_dir/octdeviceapi/oct6100api"])
+
+AC_SUBST([TOOLSVERSION], m4_esyscmd([build_tools/make_version . dahdi/tools]))
+
+AC_CONFIG_FILES([
+	makeopts
+	version.c
+	Makefile
+	doc/Makefile
+	hotplug/Makefile
+	ppp/Makefile
+	xpp/Makefile
+	xpp/oct612x/Makefile
+	xpp/perl_modules/Makefile
+	])
 AC_OUTPUT
 
 AC_MSG_NOTICE(*** dahdi-tools build successfully configured ***)

dahdi.init

@@ -144,6 +144,14 @@ hotplug_exit_after_load() {
 
 # Initialize the Xorcom Astribank (xpp/) using perl utiliites:
 xpp_startup() {
+	if [ "$ASTERISK_SUPPORTS_DAHDI_HOTPLUG" = yes ]; then
+		aas_param='/sys/module/dahdi/parameters/auto_assign_spans'
+		aas=`cat "$aas_param" 2>/dev/null`
+		if [ "$aas" = 0 ]; then
+			echo 1>&2 "Don't wait for Astribanks (use Asterisk hotplug-support)"
+			return 0
+		fi
+	fi
 	# do nothing if there are no astribank devices:
 	if ! /usr/share/dahdi/waitfor_xpds; then return 0; fi
 

dahdi_cfg.c

@@ -109,7 +109,7 @@ static int fiftysixkhdlc[DAHDI_MAX_CHANNELS];
 
 static int spans=0;
 
-static int fo_real = 1;
+static int dry_run = 0;
 
 static int verbose = 0;
 
@@ -826,8 +826,9 @@ static int apply_fiftysix(void)
 	int chanfd;
 
 	for (x = 1; x < DAHDI_MAX_CHANNELS; x++) {
-		if (skip_channel(x))
+		if (skip_channel(x) || !cc[x].sigtype)
 			continue;
+
 		chanfd = open("/dev/dahdi/channel", O_RDWR);
 		if (chanfd == -1) {
 			fprintf(stderr, 
@@ -1590,7 +1591,7 @@ int main(int argc, char *argv[])
 			force++;
 			break;
 		case 't':
-			fo_real = 0;
+			dry_run = 1;
 			break;
 		case 's':
 			stopmode = 1;
@@ -1683,9 +1684,9 @@ finish:
 	if (verbose) {
 		printconfig(fd);
 	}
-	if (!fo_real) 
-		exit(0);
 
+	if (dry_run)
+		exit(0);
 	
 	if (debug & DEBUG_APPLY) {
 		printf("About to open Master device\n");

doc/Makefile.am

@@ -0,0 +1,19 @@
+man_MANS	= \
+	dahdi_cfg.8 \
+	dahdi_maint.8 \
+	dahdi_monitor.8 \
+	dahdi_scan.8 \
+	dahdi_span_assignments.8 \
+	dahdi_span_types.8 \
+	dahdi_test.8 \
+	dahdi_tool.8 \
+	dahdi_waitfor_span_assignments.8 \
+	fxotune.8
+
+noinst_MANS	= \
+	dahdi_diag.8 \
+	fxstest.8 \
+	patgen.8 \
+	pattest.8
+
+EXTRA_DIST	= $(man_MANS) $(noinst_MANS)

hdlcgen.c

@@ -40,7 +40,7 @@
 #define RANDOM "/dev/urandom"			/* Not genuinely random */
 /* #define RANDOM "/dev/random" */		/* Quite genuinely random */
 
-int myread(int fd, char *buf, int len)
+int myread(int fd, unsigned char *buf, int len)
 {
 	int sofar;
 	int res;

hdlcstress.c

@@ -107,13 +107,12 @@ static struct fasthdlc_state fs;
 
 void send_packet(unsigned char *buf, int len)
 {
-	int res;
 	int x;
 	unsigned char outbuf[BLOCK_SIZE];
 	int pos=0;
 	unsigned int fcs = PPP_INITFCS;
 	if (hdlcmode)
-		res = write(fd, buf, len + 2);
+		write(fd, buf, len + 2);
 	else {
 		for (x=0;x<len;x++) {
 			if (fasthdlc_tx_load(&fs, buf[x]))

hotplug/Makefile.am

@@ -0,0 +1,11 @@
+
+nobase_dist_dahditools_SCRIPTS	= \
+	dahdi_handle_device	\
+	dahdi_span_config	\
+	dahdi_auto_assign_compat	\
+	span_config.d/10-dahdi-cfg	\
+	span_config.d/20-fxotune	\
+	span_config.d/50-asterisk	\
+	handle_device.d/10-span-types	\
+	handle_device.d/20-span-assignments	\
+	#

init.conf.sample

@@ -17,6 +17,7 @@
 #XPP_FIRMWARE_DIR=/usr/share/dahdi
 #XPP_HOTPLUG_DISABLED=yes
 #XPP_HOTPLUG_DAHDI=yes
+#ASTERISK_SUPPORTS_DAHDI_HOTPLUG=yes
 
 # Disable udev handling:
 #DAHDI_UDEV_DISABLE_DEVICES=yes

modules.sample

@@ -15,6 +15,8 @@ wct4xxp
 
 # Digium TE435
 # Digium TE235
+# Digium TE436
+# Digium TE236
 wcte43x
 
 # Digium TE120P: PCI single-port T1/E1/J1
@@ -51,6 +53,10 @@ wcfxo
 wctdm
 
 # Digium B410P: 4 NT/TE BRI ports
+# Digium B433P: 4 NT/TE BRI ports pci-e 
+# Digium B434P: 4 NT/TE BRI ports
+# Digium B233P: 2 NT/TE BRI ports pci-e 
+# Digium B234P: 2 NT/TE BRI ports
 wcb4xxp
 
 # Digium TC400B: G729 / G723 Transcoding Engine

patlooptest.c

@@ -168,6 +168,7 @@ int main(int argc, char *argv[])
 	int opt;
 	int oldstyle_cmdline = 1;
 	unsigned int event_count = 0;
+	time_t start_time = 0;
 
 	/* Parse the command line arguments */
 	while((opt = getopt(argc, argv, "b:s:t:r:v?h")) != -1) {
@@ -218,8 +219,6 @@ int main(int argc, char *argv[])
 	if (oldstyle_cmdline && argc > optind +1) {
 		timeout = strtoul(argv[optind+1], NULL, 10);
 	}
-	
-	time_t start_time = 0;
 
 	fd = channel_open(device, &bs);
 	if (fd < 0)

ppp/Makefile

@@ -1,29 +0,0 @@
-#COPTS	= -O2 -g
-
--include ../makeopts
-
-CFLAGS		+= $(COPTS) -fPIC
-LDFLAGS		+= -shared
-
-INCLUDE_DIR	= $(includedir)/pppd
-
-LIBDIR		= $(libdir)/pppd/$(PPPD_VERSION)
-
-PLUGINS := dahdi.so
-
-all:	$(PLUGINS)
-
-%.so: %.c
-ifeq (,$(PPPD_VERSION))
-	@echo "pppd version not found (in patchlevel.h)."
-	@echo "Install ppp source/headers and/or ./configure --with-ppp=PATH."
-	exit 1
-endif
-	$(CC) -o $@ $(CFLAGS) $^ $(LDFLAGS) 
-
-install: $(PLUGINS)
-	$(INSTALL) -d $(DESTDIR)$(LIBDIR)
-	$(INSTALL) -m 0644 $? $(DESTDIR)$(LIBDIR)
-
-clean:
-	rm -f *.o *.so *.a

ppp/Makefile.am

@@ -0,0 +1,7 @@
+plugindir		= $(libdir)/pppd/$(PPPD_VERSION)
+plugin_LTLIBRARIES	= dahdi.la
+
+dahdi_la_CFLAGS		= $(DAHDI_INCLUDE)
+dahdi_la_LDFLAGS	= -module -avoid-version
+
+CLEANFILES		= dahdi.so

tonezone.c

@@ -89,18 +89,20 @@ static int build_tone(void *data, size_t size, struct tone_zone_sound *t, int *c
 	int firstnobang = -1;
 	int freq1, freq2, time;
 	int modulate = 0;
+	float db = 1.0;
 	float gain;
 	int used = 0;
 	dup = strdup(t->data);
 	s = strtok(dup, ",");
 	while(s && strlen(s)) {
 		/* Handle optional ! which signifies don't start here*/
-		if (s[0] == '!') 
+		if (s[0] == '!') {
 			s++;
-		else if (firstnobang < 0) {
+		} else if (firstnobang < 0) {
 			PRINT_DEBUG("First no bang: %s\n", s);
 			firstnobang = *count;
 		}
+
 		if (sscanf(s, "%d+%d/%d", &freq1, &freq2, &time) == 3) {
 			/* f1+f2/time format */
 			PRINT_DEBUG("f1+f2/time format: %d, %d, %d\n", freq1, freq2, time);
@@ -118,6 +120,15 @@ static int build_tone(void *data, size_t size, struct tone_zone_sound *t, int *c
 		} else if (sscanf(s, "%d/%d", &freq1, &time) == 2) {
 			PRINT_DEBUG("f1/time format: %d, %d\n", freq1, time);
 			freq2 = 0;
+		} else if (sscanf(s, "%d@/%d", &freq1, &time) == 2) {
+			/* The "@" character has been added to enable an
+ 			 * approximately -20db tone generation of any frequency This has been done
+ 			 * primarily to generate the Australian congestion tone.
+			 * Example: "425/375,0/375,425@/375,0/375" 
+			 */
+			PRINT_DEBUG("f1 reduced amplitude/time format: %d, %d\n", freq1,time);
+			db = 0.3;
+			freq2 = 0;
 		} else if (sscanf(s, "%d", &freq1) == 1) {
 			PRINT_DEBUG("f1 format: %d\n", freq1);
 			firstnobang = *count;
@@ -137,7 +148,7 @@ static int build_tone(void *data, size_t size, struct tone_zone_sound *t, int *c
 		td = data;
 
 		/* Bring it down -8 dbm */
-		gain = pow(10.0, (LEVEL - 3.14) / 20.0) * 65536.0 / 2.0;
+		gain = db*(pow(10.0, (LEVEL - 3.14) / 20.0) * 65536.0 / 2.0);
 
 		td->fac1 = 2.0 * cos(2.0 * M_PI * (freq1 / 8000.0)) * 32768.0;
 		td->init_v2_1 = sin(-4.0 * M_PI * (freq1 / 8000.0)) * gain;

version.c.in

@@ -0,0 +1,6 @@
+/*
+ * version.c.in
+ */
+
+const char dahdi_tools_version[] = "DAHDI Tools Version - @TOOLSVERSION@";
+

xpp/Makefile

@@ -1,202 +0,0 @@
-PEDANTIC	= -ansi -pedantic -std=c99
-
-INSTALL		= install
-INSTALL_DATA	= install -m 644
-
-#
-# Ugly hack to find kernel directories before/after the split
-# to kernel/user-space.
-#
-# These variables should be passed to us. But until then...
-#
-DAHDI_TOOLSDIR	?= ..
-DAHDI_KERNELDIR	=
-
--include $(DAHDI_TOOLSDIR)/makeopts
-
-INSTALL_DATA	= $(INSTALL) -m 644
-
-# In 1.4 those are provided by autoconf through makeopts
-prefix		?= /usr
-datadir		?= $(prefix)/share
-mandir		?= $(datadir)/man
-sysconfdir	?= $(prefix)/etc
-udevrulesdir	?= $(sysconfdir)/udev/rules.d
-INSTALL		?= install
-
-INSTALL_DATA	= $(INSTALL) -m 644
-
-SBINDIR		= $(prefix)/sbin
-DATADIR		= $(datadir)/dahdi
-MANDIR		= $(mandir)/man8
-HOTPLUG_USB_DIR	= $(sysconfdir)/hotplug/usb
-PERLLIBDIR	:= $(shell eval `perl -V:sitelib`; echo "$$sitelib")
-PERL_DIRS	:= $(shell cd perl_modules; find * -name '[A-Z]*' -type d| xargs)
-PERL_MODS_PAT	:= *.pm $(PERL_DIRS:%=%/*.pm)
-PERL_MODS	:= $(shell cd perl_modules; echo $(PERL_MODS_PAT))
-
-# Variables that should be defined above, but need sane defaults:
-# FIXME: Are those values really sane?
-HOSTCC		?= $(CC)
-
-USE_OCTASIC	:= yes
-OCTASIC_DIR	:= oct612x
-
-ifneq (no,$(USE_OCTASIC))
-
-OCT_OBJS	= $(shell $(OCTASIC_DIR)/octasic-helper objects $(OCTASIC_DIR))
-OCT_SRCS	= $(shell echo $(OCT_OBJS) | tr -s ' ' '\n' | sed 's/\.o$$/.c/g')
-OCT_HERE_OBJS	= $(shell echo $(OCT_OBJS) | tr -s ' ' '\n' | sed 's,^.*/,,')
-OCT_CFLAGS	= $(shell $(OCTASIC_DIR)/octasic-helper cflags $(OCTASIC_DIR))
-OCT_DEFINES	= \
-	-DPTR_TYPE=uint32_t	\
-	-DcOCT6100_INTERNAL_SUPER_ARRAY_SIZE=1024	\
-	-DcOCT6100_MAX_ECHO_CHANNELS=672		\
-	-DcOCT6100_MAX_MIXER_EVENTS=1344
-
-ECHO_LOADER_SRC	= echo_loader.c parse_span_specs.c
-ECHO_LOADER	= $(ECHO_LOADER_SRC:.c=.o)
-endif
-
-%.8: %
-	pod2man --section 8 $^ > $@ || $(RM) $@
-PERL_SCRIPTS	=	\
-		dahdi_registration	\
-		xpp_sync	\
-		lsdahdi		\
-		xpp_blink	\
-		dahdi_genconf	\
-		dahdi_hardware	\
-		twinstar	\
-		#
-
-PERL_MANS	= $(PERL_SCRIPTS:%=%.8)
-
-# List all our sources
-XUSB_SRCS		= xtalk/xusb.c xtalk/xlist.c xtalk/debug.c
-XTALK_SRCS		= xtalk/xtalk.c
-MPPTALK_SRCS		= mpptalk.c
-ASTRIBANK_SRCS		= astribank_usb.c
-ABHEXLOAD_SRCS		= astribank_hexload.c hexfile.c pic_loader.c
-ABTOOL_SRCS		= astribank_tool.c
-ABALLOW_SRCS		= astribank_allow.c astribank_license.c
-
-SRCS	= \
-	$(XUSB_SRCS)	\
-	$(XTALK_SRCS)	\
-	$(MPPTALK_SRCS)	\
-	$(ASTRIBANK_SRCS)	\
-	$(ABHEXLOAD_SRCS)	\
-	$(ABTOOL_SRCS)	\
-	$(ABALLOW_SRCS)	\
-	$(ECHO_LOADER_SRC)
-
-# Derive object files from source list
-XUSB_OBJS		= $(XUSB_SRCS:.c=.o)
-XTALK_OBJS		= $(XTALK_SRCS:.c=.o) $(XUSB_OBJS)
-MPPTALK_OBJS		= $(MPPTALK_SRCS:.c=.o) $(XTALK_OBJS)
-ASTRIBANK_OBJS		= $(ASTRIBANK_SRCS:.c=.o) $(MPPTALK_OBJS)
-ABHEXLOAD_OBJS		= $(ABHEXLOAD_SRCS:.c=.o) $(ASTRIBANK_OBJS) $(ECHO_LOADER) $(OCT_HERE_OBJS)
-ABTOOL_OBJS		= $(ABTOOL_SRCS:.c=.o) $(ASTRIBANK_OBJS)
-ABALLOW_OBJS		= $(ABALLOW_SRCS:.c=.o) $(ASTRIBANK_OBJS)
-
-TARGETS	= .perlcheck astribank_is_starting
-PROG_INSTALL	= astribank_is_starting
-MAN_INSTALL	= $(PROG_INSTALL:%=%.8)
-ifeq	(1,$(PBX_USB))
-TARGETS	+= \
-	   astribank_tool	\
-	   astribank_hexload	\
-	   astribank_allow	\
-	   test_parse
-PROG_INSTALL	+= astribank_tool astribank_hexload astribank_allow
-endif
-ifneq	(,$(PERLLIBDIR))
-PROG_INSTALL	+= $(PERL_SCRIPTS)
-TARGETS		+= $(PERL_MANS)
-endif
-
-all: $(TARGETS)
-
-docs: $(PERL_MANS)
-
-install: all
-	$(INSTALL) -d $(DESTDIR)$(SBINDIR)
-	$(INSTALL) $(PROG_INSTALL) $(DESTDIR)$(SBINDIR)/
-	$(INSTALL) -d $(DESTDIR)$(DATADIR)
-	$(INSTALL) xpp_fxloader astribank_hook $(DESTDIR)$(DATADIR)/
-	$(INSTALL) waitfor_xpds $(DESTDIR)$(DATADIR)/
-	$(INSTALL) -d $(DESTDIR)$(udevrulesdir)
-	$(INSTALL_DATA) xpp.rules $(DESTDIR)$(udevrulesdir)/
-	$(INSTALL) -d $(DESTDIR)$(MANDIR)
-	$(INSTALL_DATA) $(MAN_INSTALL) $(DESTDIR)$(MANDIR)/
-	$(INSTALL) -d $(DESTDIR)$(HOTPLUG_USB_DIR)
-	$(INSTALL_DATA) xpp_fxloader.usermap $(DESTDIR)$(HOTPLUG_USB_DIR)/
-	# for backward compatibility and for hotplug users:
-	ln -sf $(DATADIR)/xpp_fxloader $(DESTDIR)$(HOTPLUG_USB_DIR)/
-ifneq	(,$(PERLLIBDIR))
-	$(INSTALL) -d $(DESTDIR)$(PERLLIBDIR)
-	for i in $(PERL_DIRS); \
-	do \
-		$(INSTALL) -d "$(DESTDIR)$(PERLLIBDIR)/$$i"; \
-	done
-	for i in $(PERL_MODS); \
-	do \
-		$(INSTALL_DATA) "perl_modules/$$i" "$(DESTDIR)$(PERLLIBDIR)/$$i"; \
-	done
-endif
-
-CFLAGS		+= -I. -Ixtalk -Wall -Werror
-
-astribank_hexload: $(ABHEXLOAD_OBJS)
-astribank_hexload: LIBS+=$(EXTRA_LIBS) $(USB_LIB)
-astribank_hexload: CFLAGS+=$(OCT_CFLAGS)
-
-astribank_tool: $(ABTOOL_OBJS)
-astribank_tool: LIBS+=$(EXTRA_LIBS) $(USB_LIB)
-
-astribank_allow: $(ABALLOW_OBJS)
-astribank_allow: LIBS+=$(EXTRA_LIBS) $(USB_LIB)
-
-astribank_is_starting: astribank_is_starting.o
-astribank_is_starting: LIBS+=$(EXTRA_LIBS)
-
-hex2iic: hex2iic.o iic.o hexfile.o
-
-test_parse: test_parse.o hexfile.o
-test_parse: LIBS+=$(EXTRA_LIBS) $(USB_LIB)
-
-ifneq (no,$(USE_OCTASIC))
-.octasic.depend: $(OCTASIC_DIR)/octasic-helper Makefile ../config.status
-	$(CC) -MM $(OCT_CFLAGS) \
-		`$(OCTASIC_DIR)/octasic-helper objects | \
-		tr -s ' ' '\n' | \
-		sed -e 's,.*,$(OCTASIC_DIR)/&,' -e 's/\.o$$/.c/'` > $@
-
--include .octasic.depend
-
-$(OCT_HERE_OBJS): Makefile
-	$(CC) -c $(CFLAGS) $(OCT_CFLAGS) $(OCT_DEFINES) $(OCT_SRCS)
-
-endif
-
-
-%: %.o
-	$(CC) $(LDFLAGS) $^ $(LIBS) -o $@
-
-.perlcheck: $(PERL_SCRIPTS)
-	for i in $^; do perl -I./perl_modules -c $$i || exit 1; done
-	touch $@
-
-clean:
-	$(RM) .depend .octasic.depend *.o xtalk/*.o $(OCT_HERE_OBJS) $(TARGETS)
-
-.PHONY: depend
-ifeq	(1,$(PBX_USB))
-depend: .depend
-.depend: *.c *.h xtalk/*.c
-	@echo "Calculating dependencies"
-	@if ! $(CC) $(CFLAGS) $(OCT_CFLAGS) -MM $(SRCS) > $@; then $(RM) $@; exit 1; fi
-
-include .depend
-endif

xpp/Makefile.am

@@ -0,0 +1,166 @@
+
+all-local: $(perl_checks)
+
+SUBDIRS		=
+
+
+# FIXME: try to improve code, so we can use $(PEDANTIC)
+#PEDANTIC	= -ansi -pedantic -std=c99
+GLOBAL_CFLAGS	= -I$(srcdir) -I$(srcdir)/xtalk $(PEDANTIC)
+
+if DAHDI_DEVMODE
+GLOBAL_CFLAGS	+= \
+	-Werror \
+	-Wunused \
+	-Wundef \
+	-Wmissing-format-attribute \
+	-Wformat-security \
+	-Wformat=2
+endif
+
+if PERL
+SUBDIRS		+= perl_modules
+
+%.8: %
+	@if file "$^" | cut -d: -f2 | grep -q perl; then \
+		if pod2man --section 8 $^ > $@; then \
+			echo "  GEN      $@"; \
+		else \
+			rm -f "$@"; \
+		fi \
+	fi
+
+%.check: %
+	@echo "  CHECK    $^"; \
+	if ! perl -I./perl_modules -c $^ 2>/dev/null; then \
+		perl -I./perl_modules -c $^; \
+	fi
+	@touch $@
+
+perl_scripts	=	\
+		dahdi_registration	\
+		xpp_sync	\
+		lsdahdi		\
+		xpp_blink	\
+		dahdi_genconf	\
+		dahdi_hardware	\
+		twinstar	\
+		#
+
+perl_checks	= $(perl_scripts:%=%.check)
+perl_mans	= $(perl_scripts:%=%.8)
+
+endif
+
+dist_dahditools_SCRIPTS	= xpp_fxloader astribank_hook waitfor_xpds
+udevrulesdir	= @udevrulesdir@
+udevrules_DATA	= xpp.rules
+
+dist_sbin_SCRIPTS	= $(perl_scripts)
+man_MANS		= $(perl_mans)
+CLEANFILES		= $(perl_checks) $(perl_mans)
+
+if	PBX_USB
+
+SUBDIRS		+= oct612x
+
+noinst_LTLIBRARIES	= libastribank.la libecholoader.la libhexfile.la
+
+libastribank_la_SOURCES	= \
+		astribank_usb.c	\
+		astribank_usb.h	\
+		mpptalk.c	\
+		mpptalk.h	\
+		mpp.h	\
+		mpptalk_defs.h	\
+		xtalk/debug.c	\
+		xtalk/debug.h	\
+		xtalk/xlist.c	\
+		xtalk/xlist.h	\
+		xtalk/xtalk.c	\
+		xtalk/xtalk.h	\
+		xtalk/xtalk_defs.h	\
+		xtalk/xusb.c	\
+		xtalk/xusb.h	\
+		#
+
+libastribank_la_CFLAGS		= $(GLOBAL_CFLAGS)
+
+if USE_OCTASIC
+libecholoader_la_SOURCES	= \
+		parse_span_specs.c \
+		parse_span_specs.h	\
+		echo_loader.c	\
+		echo_loader.h	\
+		#
+
+libecholoader_la_CFLAGS		= $(GLOBAL_CFLAGS) $(OCTASIC_CFLAGS)
+endif
+
+libhexfile_la_SOURCES	= \
+		hexfile.c	\
+		hexfile.h	\
+		#
+
+sbin_PROGRAMS	= \
+		astribank_tool \
+		astribank_hexload \
+		astribank_allow \
+		astribank_is_starting
+
+check_PROGRAMS		= test_parse
+test_parse_LDADD	= libhexfile.la
+
+astribank_tool_SOURCES		= astribank_tool.c
+astribank_tool_CFLAGS		= $(GLOBAL_CFLAGS)
+astribank_tool_LDFLAGS		= $(USB_LIB)
+astribank_tool_LDADD		= libastribank.la
+
+astribank_hexload_SOURCES	= \
+			astribank_hexload.c	\
+			pic_loader.c	\
+			pic_loader.h	\
+			#
+
+astribank_hexload_CFLAGS	= $(GLOBAL_CFLAGS) $(OCTASIC_CFLAGS)
+astribank_hexload_LDFLAGS	= $(USB_LIB)
+astribank_hexload_LDADD		= \
+		libhexfile.la	\
+		libastribank.la	\
+		libecholoader.la	\
+		oct612x/liboctasic.la	\
+		#
+
+astribank_allow_SOURCES		= \
+			astribank_allow.c	\
+			astribank_license.c	\
+			astribank_license.h	\
+			#
+
+astribank_allow_CFLAGS		= $(GLOBAL_CFLAGS)
+astribank_allow_LDFLAGS		= $(USB_LIB)
+astribank_allow_LDADD		= libastribank.la
+
+man_pages	= \
+		astribank_tool.8 \
+		astribank_hexload.8 \
+		astribank_allow.8 \
+		astribank_is_starting.8
+
+man_MANS	+= $(man_pages)
+endif
+
+EXTRA_DIST	= \
+	$(man_pages)	\
+	$(udevrules_DATA)	\
+	README.Astribank	\
+	astribank_upgrade	\
+	dahdi.cgi	\
+	dahdi_drivers	\
+	genconf_parameters	\
+	twinstar_hook	\
+	twinstar_setup	\
+	xpp_modprobe	\
+	xpp_timing	\
+	#
+

xpp/astribank_hexload.c

@@ -39,6 +39,7 @@
 #define	DBG_MASK	0x80
 #define	MAX_HEX_LINES	64000
 #define HAVE_OCTASIC	1
+#define DEF_SPAN_SPEC_FORMAT	"*:%c1" /* %c: 'E' or 'T' */
 
 static char	*progname;
 
@@ -83,7 +84,12 @@ int handle_hexline(struct astribank_device *astribank, struct hexline *hexline)
 	return 0;
 }
 
-void print_parse_errors(int level, const char *msg, ...)
+
+#ifdef	__GNUC__
+static void print_parse_errors(int level, const char *msg, ...) __attribute__((format(printf,2,3)));
+#endif
+
+static void print_parse_errors(int level, const char *msg, ...)
 {
 	va_list ap;
 
@@ -166,6 +172,7 @@ int main(int argc, char *argv[])
 #if HAVE_OCTASIC
 	int			opt_alaw = 0;
 	const char		*span_spec = NULL;
+	char			def_span_spec[sizeof(DEF_SPAN_SPEC_FORMAT)];
 #endif
 	int			opt_dest = 0;
 	int			opt_sum = 0;
@@ -252,6 +259,13 @@ int main(int argc, char *argv[])
 		ERR("Missing device path.\n");
 		usage();
 	}
+# ifdef HAVE_OCTASIC
+	if (!span_spec) {
+		snprintf(def_span_spec, sizeof(def_span_spec),
+				DEF_SPAN_SPEC_FORMAT, opt_alaw? 'E' : 'T');
+		span_spec = def_span_spec;
+	}
+#endif
 	if(opt_dest) {
 		/*
 		 * MPP Interface

xpp/astribank_hook

@@ -16,6 +16,8 @@ PATH="$dir:/usr/sbin:/sbin:/usr/bin:/bin"
 
 set -e
 
+LOCK="/var/lock/twinstar_startup"
+
 [ -r /etc/dahdi/init.conf ] && . /etc/dahdi/init.conf
 
 # For lab testing
@@ -32,17 +34,38 @@ if [ "$XPP_HOTPLUG_DAHDI" != yes ]; then
 fi
 
 export XPPORDER_CONF="$dahdi_conf/xpp_order"
-if [ ! -r "$XPPORDER_CONF" ]; then
-	(
-		echo "Skip($ACTION): No '$XPPORDER_CONF'"
-		echo "Removing uneeded startup semaphore"
-		astribank_is_starting -v -r 2>&1
-	) 2>&1 | $LOGGER
-	exit 0
-fi
 export DAHDI_CFG_CMD="dahdi_cfg -c $dahdi_conf/system.conf"
 export CALLED_FROM_ATRIBANK_HOOK=yes
 
+can_full_async() {
+	# Can we work aynchronously:
+	#    - Need modern Asterisk that accept hotplug DAHDI devices.
+	#    - Need DAHDI with "auto_assign_spans" == 0
+	if [ "$ASTERISK_SUPPORTS_DAHDI_HOTPLUG" = yes ]; then
+		aas_param='/sys/module/dahdi/parameters/auto_assign_spans'
+		aas=`cat "$aas_param" 2>/dev/null`
+		if [ "$aas" = 0 ]; then
+			return 0
+		else
+			$LOGGER "No async operation ($aas_param != 0)"
+		fi
+	else
+		$LOGGER "No async operation (ASTERISK_SUPPORTS_DAHDI_HOTPLUG!=yes)"
+	fi
+	return 1
+}
+
+check_xpporder_conf() {
+	if [ ! -r "$XPPORDER_CONF" ]; then
+		(
+			echo "Skip($ACTION): No '$XPPORDER_CONF'"
+			echo "Removing uneeded startup semaphore"
+			astribank_is_starting -v -r 2>&1
+		) 2>&1 | $LOGGER
+		exit 0
+	fi
+}
+
 clean_lines() {
 	sed -e 's/#.*//' -e 'y/\t/ /' -e 's/^ *//' -e 's/ *$//' -e '$s/$/\n/' "$XPPORDER_CONF"
 }
@@ -64,10 +87,6 @@ matched_devices() {
 	done
 }
 
-NUM_WANTED=`clean_lines | sed '/^$/d' | wc -l`
-NUM_GOOD=`matched_devices | wc -l`
-LOCK="/var/lock/twinstar_startup"
-
 # Wait until udev finished processing our requests
 # so we know the device files were actually created
 # before trying dahdi_cfg et-al.
@@ -77,10 +96,10 @@ wait_for_udev() {
 	echo "Waiting for udev to settle down..."
 	if [ -x /sbin/udevsettle ]; then
 		# Old system, stand-alone udevsettle command
-		time /sbin/udevsettle --timeout="$UDEV_SETTLE_MAX_TIME"
+		/sbin/udevsettle --timeout="$UDEV_SETTLE_MAX_TIME"
 	elif [ -x /sbin/udevadm ]; then
 		# Assume modern system, udevadm has settle parameter
-		if ! time /sbin/udevadm settle --timeout="$UDEV_SETTLE_MAX_TIME"
+		if ! /sbin/udevadm settle --timeout="$UDEV_SETTLE_MAX_TIME"
 		then
 			echo "udevadm failed ($?)."
 			echo "Fallback to sleep $UDEV_SETTLE_MAX_TIME seconds."
@@ -110,13 +129,9 @@ start_dahdi() {
 	rm -f "$LOCK"
 }
 
-#echo "$0: $ACTION($XBUS_NAME)" | $LOGGER
-case "$ACTION" in
-add)
-	;;
-remove)
-	;;
-online)
+old_synchronous_start() {
+	NUM_GOOD=`matched_devices | wc -l`
+	NUM_WANTED=`clean_lines | sed '/^$/d' | wc -l`
 	echo "$ACTION($XBUS_NAME): $NUM_GOOD/$NUM_WANTED from $XPPORDER_CONF" | $LOGGER
 	if [ "$NUM_GOOD" -eq "$NUM_WANTED" ]; then
 		(
@@ -142,8 +157,11 @@ online)
 			fi
 		) < /dev/null 2>&1 | $LOGGER &
 	fi
-	;;
-offline)
+}
+
+old_synchronous_stop() {
+	NUM_GOOD=`matched_devices | wc -l`
+	NUM_WANTED=`clean_lines | sed '/^$/d' | wc -l`
 	echo "$ACTION($XBUS_NAME): $NUM_GOOD/$NUM_WANTED from $XPPORDER_CONF" | $LOGGER
 	if [ "$NUM_GOOD" -eq 0 ]; then
 		echo "All Astribanks offline" | $LOGGER
@@ -152,6 +170,59 @@ offline)
 		fi
 		rm -f "$LOCK"
 	fi
+}
+
+ab_list() {
+	find /sys/devices -name idVendor 2>/dev/null | \
+		xargs grep -H  'e4e4' 2>/dev/null | \
+		sed -e 's/idVendor.*/idProduct/' | xargs grep -H '11[3456]' | \
+		sed 's,/[^/]*$,,' || :
+}
+
+tws_watchdog_enable() {
+	devdir="/sys$DEVPATH"
+	label=`cat "$devdir/label"`
+	connector=`cat "$devdir/connector"`
+	xbus=`echo "$devdir" | sed 's,.*/,,'`
+	prefix="${xbus}: [${label}] @${connector}"
+	TWS_NOAUTOJUMPFILE="$TWS_DIR/twinstar_no_autojump"
+	if [ -e "$TWS_NOAUTOJUMPFILE" ]; then
+		$LOGGER "$prefix: ignore wd (found $TWS_NOAUTOJUMPFILE)"
+	else
+		# Re-arm Astribank watchdog
+		transportdir="$devdir/transport"
+		busnum=`cat "$transportdir/busnum" 2>/dev/null || :`
+		devnum=`cat "$transportdir/devnum" 2>/dev/null || :`
+		devaddr=`printf "%03d/%03d" "$busnum" "$devnum"`
+		$LOGGER "$prefix: enabling twinstar watchdog"
+		astribank_tool -D "$devaddr" -w 1 2>&1 | $LOGGER
+	fi
+}
+
+#echo "$0: $ACTION($XBUS_NAME)" | $LOGGER
+case "$ACTION" in
+add)
+	;;
+remove)
+	ab=`ab_list | wc -l`
+	if [ "$ab" -eq 0 ]; then
+		$LOGGER "$prefix: No more Astribanks -- remove astribank_is_starting semaphore"
+		astribank_is_starting -v -r 2>&1 | $LOGGER
+	fi
+	;;
+online)
+	if can_full_async; then
+		tws_watchdog_enable
+	else
+		old_synchronous_start
+	fi
+	;;
+offline)
+	if can_full_async; then
+		:	# Nothing to do
+	else
+		old_synchronous_stop
+	fi
 	;;
 *)
 	echo "$0: Unknown ACTION='$ACTION'" | $LOGGER

xpp/astribank_is_starting.c

@@ -125,6 +125,8 @@ static int absem_detected(void)
 	if((absem = absem_get(0)) < 0) {
 		if(debug)
 			fprintf(stderr, "%s: absem does not exist\n", progname);
+		if(verbose)
+			printf("No Astribanks are initializing\n");
 		return absem;
 	}
 	if(debug)

xpp/hexfile.h

@@ -72,7 +72,11 @@ struct hexdata {
 
 __BEGIN_DECLS
 
-typedef void (*parse_hexfile_report_func_t)(int level, const char *msg, ...);
+typedef void (*parse_hexfile_report_func_t)(int level, const char *msg, ...)
+#ifdef	__GNUC__
+	__attribute__((format(printf,2,3)));
+#endif
+	;
 
 parse_hexfile_report_func_t parse_hexfile_set_reporting(parse_hexfile_report_func_t rf);
 void free_hexdata(struct hexdata *hexdata);

xpp/mpptalk.c

@@ -512,7 +512,7 @@ int mpp_send_seg(struct astribank_device *astribank, const uint8_t *data, uint16
 
 	assert(astribank != NULL);
 	xtalk_dev = astribank->xtalk_dev;
-	if(!astribank->burn_state == BURN_STATE_STARTED) {
+	if(astribank->burn_state != BURN_STATE_STARTED) {
 		ERR("Tried to send a segment while burn_state=%d\n",
 				astribank->burn_state);
 		return -EINVAL;

xpp/oct612x/Makefile

@@ -1,38 +0,0 @@
-CFLAGS=-V3.4 -ffunction-sections -I/lib/modules/$(shell uname -r)/build/include -Iinclude -Ioctdeviceapi -Ioctdeviceapi/oct6100api -DGFP_ATOMIC=0 -Dkmalloc=calloc -Dkfree=free
-LDFLAGS=-V3.4 -Wl,-Map -Wl,test.map -Wl,--gc-sections
-
-APIDIR=octdeviceapi/oct6100api/oct6100_api
-
-OCTASIC_OBJS=$(APIDIR)/oct6100_adpcm_chan.o \
-	    $(APIDIR)/oct6100_channel.o \
-	    $(APIDIR)/oct6100_chip_open.o \
-	    $(APIDIR)/oct6100_chip_stats.o \
-	    $(APIDIR)/oct6100_conf_bridge.o \
-	    $(APIDIR)/oct6100_debug.o \
-	    $(APIDIR)/oct6100_events.o \
-	    $(APIDIR)/oct6100_interrupts.o \
-	    $(APIDIR)/oct6100_memory.o \
-	    $(APIDIR)/oct6100_miscellaneous.o \
-	    $(APIDIR)/oct6100_mixer.o \
-	    $(APIDIR)/oct6100_phasing_tsst.o \
-	    $(APIDIR)/oct6100_playout_buf.o \
-	    $(APIDIR)/oct6100_remote_debug.o \
-	    $(APIDIR)/oct6100_tlv.o \
-	    $(APIDIR)/oct6100_tone_detection.o \
-	    $(APIDIR)/oct6100_tsi_cnct.o \
-	    $(APIDIR)/oct6100_tsst.o \
-	    $(APIDIR)/oct6100_user.o \
-	    apilib/bt/octapi_bt0.o \
-	    apilib/largmath/octapi_largmath.o \
-	    apilib/llman/octapi_llman.o
-
-
-all: test
-
-test.o: test.c
-
-test: test.o $(OCTASIC_OBJS)
-
-clean:
-	rm -rf test test.o
-	rm -rf $(OCTASIC_OBJS)

xpp/oct612x/Makefile.am

@@ -0,0 +1,116 @@
+OCTASIC_DEFINES	= \
+	-DPTR_TYPE=uint32_t	\
+	-DcOCT6100_INTERNAL_SUPER_ARRAY_SIZE=1024	\
+	-DcOCT6100_MAX_ECHO_CHANNELS=672		\
+	-DcOCT6100_MAX_MIXER_EVENTS=1344
+
+noinst_LTLIBRARIES	= liboctasic.la
+
+# Taken from octasic-helper
+liboctasic_la_SOURCES	= \
+	octdeviceapi/oct6100api/oct6100_api/oct6100_adpcm_chan.c \
+	octdeviceapi/oct6100api/oct6100_api/oct6100_channel.c \
+	octdeviceapi/oct6100api/oct6100_api/oct6100_chip_open.c \
+	octdeviceapi/oct6100api/oct6100_api/oct6100_chip_stats.c \
+	octdeviceapi/oct6100api/oct6100_api/oct6100_conf_bridge.c \
+	octdeviceapi/oct6100api/oct6100_api/oct6100_debug.c \
+	octdeviceapi/oct6100api/oct6100_api/oct6100_events.c \
+	octdeviceapi/oct6100api/oct6100_api/oct6100_interrupts.c \
+	octdeviceapi/oct6100api/oct6100_api/oct6100_memory.c \
+	octdeviceapi/oct6100api/oct6100_api/oct6100_miscellaneous.c \
+	octdeviceapi/oct6100api/oct6100_api/oct6100_mixer.c \
+	octdeviceapi/oct6100api/oct6100_api/oct6100_phasing_tsst.c \
+	octdeviceapi/oct6100api/oct6100_api/oct6100_playout_buf.c \
+	octdeviceapi/oct6100api/oct6100_api/oct6100_remote_debug.c \
+	octdeviceapi/oct6100api/oct6100_api/oct6100_tlv.c \
+	octdeviceapi/oct6100api/oct6100_api/oct6100_tone_detection.c \
+	octdeviceapi/oct6100api/oct6100_api/oct6100_tsi_cnct.c \
+	octdeviceapi/oct6100api/oct6100_api/oct6100_tsst.c \
+	apilib/bt/octapi_bt0.c \
+	apilib/largmath/octapi_largmath.c \
+	apilib/llman/octapi_llman.c
+
+noinst_HEADERS	= \
+		apilib/bt/octapi_bt0_private.h	\
+		apilib/llman/octapi_llman_private.h	\
+		include/apilib/octapi_bt0.h	\
+		include/apilib/octapi_largmath.h	\
+		include/apilib/octapi_llman.h	\
+		include/digium_unused.h	\
+		include/oct6100api/oct6100_adpcm_chan_inst.h	\
+		include/oct6100api/oct6100_adpcm_chan_pub.h	\
+		include/oct6100api/oct6100_api.h	\
+		include/oct6100api/oct6100_api_inst.h	\
+		include/oct6100api/oct6100_apimi.h	\
+		include/oct6100api/oct6100_apiud.h	\
+		include/oct6100api/oct6100_channel_inst.h	\
+		include/oct6100api/oct6100_channel_pub.h	\
+		include/oct6100api/oct6100_chip_open_inst.h	\
+		include/oct6100api/oct6100_chip_open_pub.h	\
+		include/oct6100api/oct6100_chip_stats_inst.h	\
+		include/oct6100api/oct6100_chip_stats_pub.h	\
+		include/oct6100api/oct6100_conf_bridge_inst.h	\
+		include/oct6100api/oct6100_conf_bridge_pub.h	\
+		include/oct6100api/oct6100_debug_inst.h	\
+		include/oct6100api/oct6100_debug_pub.h	\
+		include/oct6100api/oct6100_defines.h	\
+		include/oct6100api/oct6100_errors.h	\
+		include/oct6100api/oct6100_events_inst.h	\
+		include/oct6100api/oct6100_events_pub.h	\
+		include/oct6100api/oct6100_interrupts_inst.h	\
+		include/oct6100api/oct6100_interrupts_pub.h	\
+		include/oct6100api/oct6100_mixer_inst.h	\
+		include/oct6100api/oct6100_mixer_pub.h	\
+		include/oct6100api/oct6100_phasing_tsst_inst.h	\
+		include/oct6100api/oct6100_phasing_tsst_pub.h	\
+		include/oct6100api/oct6100_playout_buf_inst.h	\
+		include/oct6100api/oct6100_playout_buf_pub.h	\
+		include/oct6100api/oct6100_remote_debug_inst.h	\
+		include/oct6100api/oct6100_remote_debug_pub.h	\
+		include/oct6100api/oct6100_tlv_inst.h	\
+		include/oct6100api/oct6100_tone_detection_inst.h	\
+		include/oct6100api/oct6100_tone_detection_pub.h	\
+		include/oct6100api/oct6100_tsi_cnct_inst.h	\
+		include/oct6100api/oct6100_tsi_cnct_pub.h	\
+		include/oct6100api/oct6100_tsst_inst.h	\
+		include/octdef.h	\
+		include/octmac.h	\
+		include/octosdependant.h	\
+		include/octrpc/oct6100_rpc_protocol.h	\
+		include/octrpc/rpc_protocol.h	\
+		include/octtype.h	\
+		include/octtypevx.h	\
+		include/octtypewin.h	\
+		#
+
+liboctasic_la_CFLAGS	= \
+	$(OCTASIC_DEFINES) \
+	$(OCTASIC_CFLAGS)
+
+
+EXTRA_DIST	= \
+		get_discards	\
+		octasic-helper	\
+		octdeviceapi/oct6100api/oct6100_adpcm_chan_priv.h	\
+		octdeviceapi/oct6100api/oct6100_api/oct6100_user.c	\
+		octdeviceapi/oct6100api/oct6100_apimi/oct6100_mask_interrupts.c	\
+		octdeviceapi/oct6100api/oct6100_channel_priv.h	\
+		octdeviceapi/oct6100api/oct6100_chip_open_priv.h	\
+		octdeviceapi/oct6100api/oct6100_chip_stats_priv.h	\
+		octdeviceapi/oct6100api/oct6100_conf_bridge_priv.h	\
+		octdeviceapi/oct6100api/oct6100_debug_priv.h	\
+		octdeviceapi/oct6100api/oct6100_events_priv.h	\
+		octdeviceapi/oct6100api/oct6100_interrupts_priv.h	\
+		octdeviceapi/oct6100api/oct6100_memory_priv.h	\
+		octdeviceapi/oct6100api/oct6100_miscellaneous_priv.h	\
+		octdeviceapi/oct6100api/oct6100_mixer_priv.h	\
+		octdeviceapi/oct6100api/oct6100_phasing_tsst_priv.h	\
+		octdeviceapi/oct6100api/oct6100_playout_buf_priv.h	\
+		octdeviceapi/oct6100api/oct6100_remote_debug_priv.h	\
+		octdeviceapi/oct6100api/oct6100_tlv_priv.h	\
+		octdeviceapi/oct6100api/oct6100_tone_detection_priv.h	\
+		octdeviceapi/oct6100api/oct6100_tsi_cnct_priv.h	\
+		octdeviceapi/oct6100api/oct6100_tsst_priv.h	\
+		octdeviceapi/oct6100api/oct6100_version.h	\
+		test.c	\
+		#

xpp/perl_modules/Dahdi/Hardware/PCI.pm

@@ -105,9 +105,14 @@ my %pci_ids = (
 
 	# from wcte435/235
 	'd161:800e'		=> { DRIVER => 'wcte43x', DESCRIPTION => 'Wildcard TE435/235' },
+	'd161:8013'		=> { DRIVER => 'wcte43x', DESCRIPTION => 'Wildcard TE436/236' },
 
 	# from wcb4xxp
 	'd161:b410'		=> { DRIVER => 'wcb4xxp', DESCRIPTION => 'Digium Wildcard B410P' },
+	'd161:8014'		=> { DRIVER => 'wcb4xxp', DESCRIPTION => 'Digium Wildcard B433' },
+	'd161:8015'		=> { DRIVER => 'wcb4xxp', DESCRIPTION => 'Digium Wildcard B434' },
+	'd161:8016'		=> { DRIVER => 'wcb4xxp', DESCRIPTION => 'Digium Wildcard B233' },
+	'd161:8017'		=> { DRIVER => 'wcb4xxp', DESCRIPTION => 'Digium Wildcard B234' },
 
 	# from tor2
 	'10b5:9030'		=> { DRIVER => 'tor2', DESCRIPTION => 'PLX 9030' },

xpp/perl_modules/Makefile.am

@@ -0,0 +1,27 @@
+perllibdir		= @perllibdir@
+nobase_perllib_DATA	= \
+	Dahdi.pm \
+	Dahdi/Hardware.pm \
+	Dahdi/Xpp/Line.pm \
+	Dahdi/Xpp/Xbus.pm \
+	Dahdi/Xpp/Xpd.pm \
+	Dahdi/Xpp/Mpp.pm \
+	Dahdi/Span.pm \
+	Dahdi/Utils.pm \
+	Dahdi/Chans.pm \
+	Dahdi/Xpp.pm \
+	Dahdi/Config/Params.pm \
+	Dahdi/Config/Gen/Xpporder.pm \
+	Dahdi/Config/Gen/Spantypes.pm \
+	Dahdi/Config/Gen/Modules.pm \
+	Dahdi/Config/Gen/Users.pm \
+	Dahdi/Config/Gen/Freepbxdb.pm \
+	Dahdi/Config/Gen/Unicall.pm \
+	Dahdi/Config/Gen/Chandahdi.pm \
+	Dahdi/Config/Gen/Assignedspans.pm \
+	Dahdi/Config/Gen/System.pm \
+	Dahdi/Config/Gen.pm \
+	Dahdi/Hardware/USB.pm \
+	Dahdi/Hardware/PCI.pm
+
+EXTRA_DIST	= $(nobase_perllib_DATA)

xpp/waitfor_xpds

@@ -52,7 +52,7 @@ ab_serial_nums() {
 }
 
 detected_serial_nums() {
-	for i in /sys/bus/astribanks/devices/*/transport; do
+	for i in `ls -1d /sys/bus/astribanks/devices/*/transport 2>/dev/null`; do
 		s=`cat "$i/serial" 2>/dev/null` || :
 		if [ "$s" = '' ]; then
 			echo "NO-SERIAL"
@@ -89,19 +89,22 @@ waitfor_ab_initialization() {
 	done
 }
 
+clean_lines() {
+	sed -e 's/#.*//' -e 'y/\t/ /' -e 's/^ *//' -e 's/ *$//' -e '$s/$/\n/' "$1"
+}
+
 # Any hardware?
 if ! dahdi_hardware="`which dahdi_hardware 2>/dev/null`"; then
 	echo >&2 "$0: Missing dahdi_hardware"
 	exit 0
 fi
-if ! astribank_is_starting="`which astribank_is_starting 2>/dev/null`"; then
-	echo >&2 "$0: Missing astribank_is_starting"
-	exit 0
-fi
+
+# Just make sure
 if [ "`$dahdi_hardware | grep xpp_usb`" != "" ]; then
 	astribank_is_starting -v -a
 fi
 if ! astribank_is_starting; then
+	# No Astribanks ever seen -- nothing to do
 	exit 0
 fi
 
@@ -149,13 +152,22 @@ cat /sys/bus/astribanks/devices/*/waitfor_xpds 2> /dev/null || :
 
 # Wait for device to stabilize and XPD's to finish initalizations
 echo 1>&2 "Astribanks initializing spans"
-if [ "$XPP_HOTPLUG_DAHDI" = yes ]; then
-	if [ "$CALLED_FROM_ATRIBANK_HOOK" = '' ]; then
-		# Now we can wait until the hotplug run would remove the semaphore
-		echo -n 1>&2 "Other DAHDI initializations... "
-		astribank_is_starting -v -w 1>&2
+if [ "$XPP_HOTPLUG_DAHDI" = yes -a "$CALLED_FROM_ATRIBANK_HOOK" = '' -a \
+		"$ASTERISK_SUPPORTS_DAHDI_HOTPLUG" != 'yes'  ]; then
+	if [ ! -f /etc/dahdi/xpp_order ]; then
+		echo 1>&2 "WARNING: No ASTERISK_SUPPORTS_DAHDI_HOTPLUG" \
+			" and no /etc/dahdi/xpp_order"
+	else
+		count=`clean_lines /etc/dahdi/xpp_order | wc -l`
+		if [ "$count" -le 0 ]; then
+			echo 1>&2 "WARNING: No ASTERISK_SUPPORTS_DAHDI_HOTPLUG" \
+				" and empty /etc/dahdi/xpp_order"
+		else
+			# Now we can wait until the hotplug run would remove the semaphore
+			echo -n 1>&2 "Other DAHDI initializations... "
+			astribank_is_starting -v -w 1>&2
+		fi
 	fi
-else
-	# Non-hotplug -- Sequential initialization, remove semaphore
-	astribank_is_starting -v -r 1>&2
 fi
+# All Astribanks initialized -- remove semaphore
+astribank_is_starting -v -r 1>&2

xpp/xpp_fxloader

@@ -319,22 +319,23 @@ load_fw_device() {
 					if [ "$pri_spec_wildcard" != '' ]; then
 						debug "ECHO($dev_short): Found definitions for wildcard -- $pri_spec_wildcard"
 					fi
-					pri_spec=`echo "$pri_spec_wildcard $pri_spec" | tr -s ' \t\n' ','`
-					if [ "$pri_spec" != '' ]; then
+					pri_spec_params=""
+					if [ "$pri_spec$pri_spec_wildcard" != '' ]; then
+						pri_spec=`echo "$pri_spec_wildcard $pri_spec" | tr -s ' \t\n' ','`
 						pri_spec_params="-S $pri_spec"
 						debug "ECHO($dev_short): pri_spec_params='$pri_spec_params'"
 					fi
 				fi
 				# Fallback to legacy xpp.conf
 				default_pri_protocol=''
-				default_law=''
+				law=''
 				if [ -r "$XPP_CONFIG" ]; then
 					default_pri_protocol=`awk '/^pri_protocol/ {print $2}' $XPP_CONFIG`
 					if [ "$default_pri_protocol" != '' ]; then
 						debug "ECHO($dev_short): Found legacy xpp.conf setting -- $default_pri_protocol"
 						# "E1" or empty (implied E1) means aLaw
 						if [ "$default_pri_protocol" != 'T1' ]; then
-							default_law='-A'
+							law='-A'
 						fi
 					fi
 				fi
@@ -343,7 +344,7 @@ load_fw_device() {
 			caps_num=`echo "$abtool_output" | grep 'ECHO ports' | sed -e 's/.*: *//'`
 			debug "ECHO($dev_short): $caps_num channels allowed."
 			if [ "$caps_num" != '0' ]; then
-				run_astribank_hexload -D "$dev" -O $default_law $pri_spec_params "$echo_file"
+				run_astribank_hexload -D "$dev" -O $law $pri_spec_params "$echo_file"
 			else
 				echo "WARNING: ECHO burning was skipped (no capabilities)"
 			fi

xpp/xpp_fxloader.usermap

@@ -1,10 +0,0 @@
-# module	match_flags	idVendor	idProduct	bcdDevice_lo	bcdDevice_hi	bDeviceClass	bDeviceSubClass	bDeviceProtocol	bInterfaceClass	bInterfaceSubClass	bInterfaceProtocol	driver_info
-xpp_fxloader	0x0003		0x04b4		0x8613		0x0000		0x0000		0x00		0x00		0x00		0x00		0x00			0x00			0x0
-xpp_fxloader	0x0003		0xe4e4		0x1130		0x0000		0x0000		0x00		0x00		0x00		0x00		0x00			0x00			0x0
-xpp_fxloader	0x0003		0xe4e4		0x1131		0x0000		0x0000		0x00		0x00		0x00		0x00		0x00			0x00			0x0
-xpp_fxloader	0x0003		0xe4e4		0x1140		0x0000		0x0000		0x00		0x00		0x00		0x00		0x00			0x00			0x0
-xpp_fxloader	0x0003		0xe4e4		0x1141		0x0000		0x0000		0x00		0x00		0x00		0x00		0x00			0x00			0x0
-xpp_fxloader	0x0003		0xe4e4		0x1150		0x0000		0x0000		0x00		0x00		0x00		0x00		0x00			0x00			0x0
-xpp_fxloader	0x0003		0xe4e4		0x1151		0x0000		0x0000		0x00		0x00		0x00		0x00		0x00			0x00			0x0
-xpp_fxloader	0x0003		0xe4e4		0x1160		0x0000		0x0000		0x00		0x00		0x00		0x00		0x00			0x00			0x0
-xpp_fxloader	0x0003		0xe4e4		0x1161		0x0000		0x0000		0x00		0x00		0x00		0x00		0x00			0x00			0x0

xpp/xtalk/xusb.c

@@ -67,6 +67,8 @@ static void xusb_init();
  *     variable of that name. Existing options:
  *
  *     - "use-clear-halt" -- force USB "clear_halt" operation during
+ *                           device initialization (this is the default)
+ *     - "no-use-clear-halt" -- force no USB "clear_halt" operation during
  *                           device initialization
  *     - "no-lock" -- prevent using global sempahore to serialize libusb
  *                    initialization. Previously done via "XUSB_NOLOCK"
@@ -888,7 +890,7 @@ static void xusb_init()
 }
 
 /* XTALK option handling */
-static int use_clear_halt = 0;
+static int use_clear_halt = 1;
 static int libusb_no_lock = 0;
 
 static int xtalk_one_option(const char *option_string)
@@ -897,6 +899,10 @@ static int xtalk_one_option(const char *option_string)
 		use_clear_halt = 1;
 		return 0;
 	}
+	if (strcmp(option_string, "no-use-clear-halt") == 0) {
+		use_clear_halt = 0;
+		return 0;
+	}
 	if (strcmp(option_string, "no-lock") == 0) {
 		libusb_no_lock = 1;
 		return 0;

zonedata.c

@@ -59,11 +59,18 @@ struct tone_zone builtin_zones[] =
 	  .description = "Australia",
 	  .ringcadence = {  400, 200, 400, 2000 },
 	  .tones = {
-			{ DAHDI_TONE_DIALTONE, "413+438" },
+				  
+			{ DAHDI_TONE_DIALTONE, "415+440" },
 			{ DAHDI_TONE_BUSY, "425/375,0/375" },
 			{ DAHDI_TONE_RINGTONE, "413+438/400,0/200,413+438/400,0/2000" },
-			/* XXX Congestion: Should reduce by 10 db every other cadence XXX */
-			{ DAHDI_TONE_CONGESTION, "425/375,0/375,420/375,0/375" },
+			/* The Australian congestion tone is 425Hz, 375ms On, 375ms Off, with the
+			 * second cadence being half the amplitude of the first; so the first cadence
+			 * is approximately -10dB with the second one being -20dB.  Using the update
+			 * ToneZone.c file, this can be accomplished by adding the "@" symbol in front
+			 * of the frequency to reduce amplification, as in the following entry for
+			 * Congestion:
+			 */
+			{ DAHDI_TONE_CONGESTION, "425/375,0/375,425@/375,0/375" },
 			{ DAHDI_TONE_CALLWAIT, "425/100,0/200,425/200,0/4400" },
 			{ DAHDI_TONE_DIALRECALL, "413+428" },
 			{ DAHDI_TONE_RECORDTONE, "!425/1000,!0/15000,425/360,0/15000" },
@@ -928,6 +935,8 @@ struct tone_zone builtin_zones[] =
 			{ DAHDI_TONE_RECORDTONE, "1400/400,0/15000" },
 			{ DAHDI_TONE_INFO, "950/330,1440/330,1800/330,0/1000" },
 			{ DAHDI_TONE_STUTTER, "!425/100,!0/100,!425/100,!0/100,!425/100,!0/100,!425/100,!0/100,!425/100,!0/100,!425/100,!0/100,425" },
+			/* DIALRECALL - not specified */
+			{ DAHDI_TONE_DIALRECALL, "!350+440/100,!0/100,!350+440/100,!0/100,!350+440/100,!0/100,350+440" },
 		},
 	  .dtmf_high_level = -10,
 	  .dtmf_low_level = -10,
@@ -948,6 +957,8 @@ struct tone_zone builtin_zones[] =
 			/* This should actually be 950+1400+1800, but we only support 2 tones at a time */
 			{ DAHDI_TONE_INFO,       "!950+1400/300,!0/1000,!950+1400/300,!0/1000,!950+1400/1000,0" },
 			{ DAHDI_TONE_STUTTER,    "!450/100,!0/100,!450/100,!0/100,!450/100,!0/100,!450/100,!0/100,!450/100,!0/100,!450/100,!0/100,450" },
+			/* DIALRECALL - not specified */
+			{ DAHDI_TONE_DIALRECALL, "!350+440/100,!0/100,!350+440/100,!0/100,!350+440/100,!0/100,350+440" },
 		},
 		.dtmf_high_level = -10,
 		.dtmf_low_level = -10,
@@ -996,6 +1007,8 @@ struct tone_zone builtin_zones[] =
 			{ DAHDI_TONE_INFO, "950/333,1400/333,1800/333,0/1000" },
 			/* STUTTER TONE - not specified */
 			{ DAHDI_TONE_STUTTER, "!425/100,!0/100,!425/100,!0/100,!425/100,!0/100,!425/100,!0/100,!425/100,!0/100,!425/100,!0/100,425" },
+			/* DIALRECALL - not specified */
+			{ DAHDI_TONE_DIALRECALL, "!350+440/100,!0/100,!350+440/100,!0/100,!350+440/100,!0/100,350+440" },
 		},
 		.dtmf_high_level = -10,
 		.dtmf_low_level = -10,
@@ -1044,6 +1057,8 @@ struct tone_zone builtin_zones[] =
 			{ DAHDI_TONE_INFO, "950/330,1450/330,1850/330,0/1000" },
 			/* STUTTER TONE */
 			{ DAHDI_TONE_STUTTER, "380+420" },
+			/* DIALRECALL - not specified */
+			{ DAHDI_TONE_DIALRECALL, "!350+440/100,!0/100,!350+440/100,!0/100,!350+440/100,!0/100,350+440" },
 		},
 		.dtmf_high_level = -10,
 		.dtmf_low_level = -10,