make tag in preparation for release

git-svn-id: https://origsvn.digium.com/svn/libpri/tags/1.2.1@282 2fbb986a-6c06-0410-b554-c9c1f0a7f128

ChangeLog

@@ -1,33 +1,16 @@
-2006-01-18 Russell Bryant <russell@digium.com>
+libpri 0.3.0
+-- Fix talking to switch
+-- Add pri dump
+-- Add test application
+-- Fix strncpy stuff
+libpri 0.1.2
+-- Added PRI_EVENT_HANGUP_ACK so you can know when the disconnect was
+acknowledged
 
-	* Libpri 1.2.2 Released
-
-2006-01-17 13:43 +0000 [r291]  Kevin P. Fleming <kpfleming@digium.com>
-
-	* q931.c: ensure that user-user info field in call is properly
-	  reset when not needed
-
-2006-01-10 20:19 +0000 [r290]  Matt Frederickson <creslin@digium.com>
-
-	* Makefile: Backport of doing correct minor numbers to 1.2 (#6188)
-
-2005-12-27 14:01 +0000 [r284]  Matt Frederickson <creslin@digium.com>
-
-	* q931.c: Fix for issue #6039 backported to 1.2
-
-2005-12-06 21:35 +0000 [r280]  Matt Frederickson <creslin@digium.com>
-
-	* q921.c: Send RR as command instead of response when T200 expires
-	  after receiving RNR.
-
-2005-12-01 23:13 +0000 [r274]  Kevin P. Fleming <kpfleming@digium.com>
-
-	* Makefile: Makefile 'update' target now supports Subversion
-	  repositories (issue #5875)
-
-2005-12-01 02:34 +0000 [r270]  Matt Frederickson <creslin@digium.com>
-
-	* q931.c: Backport of fix from trunk. Fix broken single digit
-	  keypad facility code.
+libpri 0.1.1
+-- Added PRI_DEBUG_Q931_ANOMALY flag so that certain non-error-related
+messages would not be output unless specifically desired.
 
+libpri 0.1.0
+ -- Initial release
 

Makefile

@@ -41,7 +41,7 @@ DYNAMIC_OBJS=copy_string.lo pri.lo q921.lo prisched.lo q931.lo pri_facility.lo
 CFLAGS=-Wall -Werror -Wstrict-prototypes -Wmissing-prototypes -g $(ALERTING) $(LIBPRI_COUNTERS)
 INSTALL_PREFIX?=
 INSTALL_BASE=/usr
-SOFLAGS = -Wl,-hlibpri.so.1.0
+SOFLAGS = -Wl,-hlibpri.so.1
 LDCONFIG = /sbin/ldconfig
 ifeq (${OSARCH},Linux)
 LDCONFIG_FLAGS=-n
@@ -87,13 +87,13 @@ ifneq (${OSARCH},SunOS)
 	install -m 644 libpri.h $(INSTALL_PREFIX)$(INSTALL_BASE)/include
 	install -m 755 $(DYNAMIC_LIBRARY) $(INSTALL_PREFIX)$(INSTALL_BASE)/lib
 	if [ -x /usr/sbin/sestatus ] && ( /usr/sbin/sestatus | grep "SELinux status:" | grep -q "enabled"); then  restorecon -v $(INSTALL_PREFIX)$(INSTALL_BASE)/lib/$(DYNAMIC_LIBRARY); fi
-	( cd $(INSTALL_PREFIX)$(INSTALL_BASE)/lib ; ln -sf libpri.so.1.0 libpri.so ; ln -sf libpri.so.1.0 libpri.so.1 )
+	( cd $(INSTALL_PREFIX)$(INSTALL_BASE)/lib ; ln -sf libpri.so.1 libpri.so )
 	install -m 644 $(STATIC_LIBRARY) $(INSTALL_PREFIX)$(INSTALL_BASE)/lib
 	if test $$(id -u) = 0; then $(LDCONFIG); fi
 else
 	install -f $(INSTALL_PREFIX)$(INSTALL_BASE)/include -m 644 libpri.h
 	install -f $(INSTALL_PREFIX)$(INSTALL_BASE)/lib -m 755 $(DYNAMIC_LIBRARY)
-	( cd $(INSTALL_PREFIX)$(INSTALL_BASE)/lib ; ln -sf libpri.so.1.0 libpri.so ; $(SOSLINK) )
+	( cd $(INSTALL_PREFIX)$(INSTALL_BASE)/lib ; ln -sf libpri.so.1 libpri.so ; $(SOSLINK) )
 	install -f $(INSTALL_PREFIX)$(INSTALL_BASE)/lib -m 644 $(STATIC_LIBRARY)
 endif
 
@@ -131,8 +131,7 @@ $(STATIC_LIBRARY): $(STATIC_OBJS)
 $(DYNAMIC_LIBRARY): $(DYNAMIC_OBJS)
 	$(CC) -shared $(SOFLAGS) -o $@ $(DYNAMIC_OBJS)
 	$(LDCONFIG) $(LDCONFIG_FLAGS) .
-	ln -sf libpri.so.1.0 libpri.so
-	ln -sf libpri.so.1.0 libpri.so.1
+	ln -sf libpri.so.1 libpri.so
 	$(SOSLINK)
 
 clean:

q931.c

@@ -2798,8 +2798,6 @@ int q931_setup(struct pri *pri, q931_call *c, struct pri_sr *req)
 
 	if (req->useruserinfo)
 		libpri_copy_string(c->useruserinfo, req->useruserinfo, sizeof(c->useruserinfo));
-	else
-		c->useruserinfo[0] = '\0';
 
 	if (req->nonisdn && (pri->switchtype == PRI_SWITCH_NI2))
 		c->progressmask = PRI_PROG_CALLER_NOT_ISDN;
@@ -3084,7 +3082,6 @@ int q931_receive(struct pri *pri, q931_h *h, int len)
 		c->channelno = -1;
 		break;
 	case Q931_INFORMATION:
-		c->callednum[0] = '\0';
 		break;
 	case Q931_STATUS_ENQUIRY:
 		break;