Importing files for 1.4.9 release

git-svn-id: https://origsvn.digium.com/svn/libpri/tags/1.4.9@663 2fbb986a-6c06-0410-b554-c9c1f0a7f128

.version

@@ -1 +1 @@
-1.4.10.1
+1.4.9

ChangeLog

@@ -1,89 +1,3 @@
-2009-04-18 Matthew Fredrickson <creslin@digium.com>
-
-	* libpri 1.4.10.1 released.  Includes a fix for a regression found in
-	  the last few revisions of libpri, but fixed in revision 859 of
-	  branches/1.4.  The summary is as follows:
-
-	* q921.c: There are two changes in this commit that are bug fixes for
-	  various Q.921 issues found in internal testing.
-
-	  Both were exposed/introduced by the TBR4 compliance patch for bug
-	  #12861, in changing how retransmissions and in how the transmission
-	  queue was maintained.  TX-RX message flow and acknowledgement was
-	  severely restricted, since the patch changed the behavior so that
-	  pending untransmitted frames would not actually be send until the
-	  next RR was received in normal circumstances, or REJ when a reject
-	  frame was received.  On busy links, this can severly limit the
-	  amount of useful traffic that is sent, and can slow down message
-	  transmission.
-
-	  Until someone can point out where in Q.921 it is mandated for us to
-	  wait for RR frames to start sending untransmitted messages, the
-	  first change is to allow us to send untransmitted frames when we
-	  receive new I frames as well, with updated N(R).
-
-	  The other bug fixed is a situation caused by the restricted traffic
-	  flow, if an outside process tries to send an I-frame asynchronous to
-	  an RR frame, when the transmit window was previously closed and then
-	  opened up but an RR has not been received yet.  A bug was found with
-	  the integration of the old transmit code with the new reject
-	  handling code which caused the new frame to be sent immediately,
-	  regardless if there were any pending untransmitted I-frames in the
-	  queue to be sent and causing an out of order I-frame to be sent to
-	  the other side.  This bug is also fixed in this patch.
-
-2009-04-18 Matthew Fredrickson <creslin@digium.com>
-
-	* libpri 1.4.10 released.
-
-2009-04-02 19:33 +0000 [r726]  Richard Mudgett <rmudgett@digium.com>
-
-	* pri_facility.c: Comment changes and some string content
-	  corrections.
-
-2009-03-26 16:01 +0000 [r715]  Richard Mudgett <rmudgett@digium.com>
-
-	* libpri.h: Comment changes to note what ISDN message type causes
-	  the event.
-
-2009-03-19 01:39 +0000 [r711]  Richard Mudgett <rmudgett@digium.com>
-
-	* pri_facility.c: Added pSS1InfoElement comments in
-	  qsig_cf_callrerouting().
-
-2009-03-13 01:05 +0000 [r705]  Richard Mudgett <rmudgett@digium.com>
-
-	* build_tools/make_version: Use the correct branch integrated
-	  property when generating the version string. Update the
-	  make_version file to the latest Asterisk version with the
-	  appropriate libpri required chage.
-
-2009-03-04 20:31 +0000 [r701]  Joshua Colp <jcolp@digium.com>
-
-	* q931.c: Make sure we only have 4 octects on unrestricted 64k data
-	  calls. (closes issue #14507) Reported by: jsmith Patches:
-	  64k-data.patch uploaded by jsmith (license 15) Tested by: jsmith
-	  (closes issue #13118) Reported by: radpeter
-
-2009-02-02 20:18 +0000 [r687]  Leif Madsen <lmadsen@digium.com>
-
-	* libpri.h: Fix a small spelling error. (closes issue #14375)
-	  Reported by: jeremy1
-
-2009-01-27 23:22 +0000 [r680]  Matthew Fredrickson <creslin@digium.com>
-
-	* q921.c: A couple of last BRI fixes in libpri... don't discard
-	  pending iframes when we call the q921_dchannel_up routine, since
-	  we need to be able to send the ones that were queued up while the
-	  D-channel went down and is being reactivated. Also fix some buggy
-	  logic in the frame transmission decision code.
-
-2009-01-22 21:48 +0000 [r675]  Matthew Fredrickson <creslin@digium.com>
-
-	* q921.c: Change behavior so that we do not send I-frames when link
-	  is down, but instead queue them up until the link comes up and
-	  send them out then.
-
 2009-01-09 Matthew Fredrickson <creslin@digium.com>
 
 	* libpri 1.4.9 released.

build_tools/make_version

@@ -1,7 +1,7 @@
 #!/bin/sh
 
 if [ -f ${1}/.version ]; then
-    cat ${1}/.version
+	cat ${1}/.version
 elif [ -d .svn ]; then
     PARTS=`LANG=C svn info ${1} | ${GREP} URL | ${AWK} '{print $2;}' | sed -e 's:^.*/svn/libpri/::' | sed -e 's:/: :g'`
     BRANCH=0
@@ -10,70 +10,63 @@ elif [ -d .svn ]; then
 
     REV=`svnversion -c ${1} | cut -d: -f2`
 
-    INTEGRATED=`LANG=C svn pg automerge-propname ${1}`
-    if [ -z "${INTEGRATED}" ] ; then
-        INTEGRATED=svnmerge-integrated
-    fi
+    BASE=`LANG=C svn pg svnmerge-integrated ${1} | cut -d: -f1`
 
-    BASE=`LANG=C svn pg ${INTEGRATED} ${1} | cut -d: -f1`
-
-    if [ "${PARTS}" = "trunk" ] ; then
-        echo SVN-trunk-r${REV}
-        exit 0
-    fi
+	if [ "${PARTS}" = "trunk" ] ; then
+	echo SVN-trunk-r${REV}
+	exit 0
+	fi
 
     for PART in $PARTS ; do
-        if [ ${TAG} != 0 ] ; then
-            if [ "${PART}" = "autotag_for_be" ] ; then
-                continue
-            fi
-            if [ "${PART}" = "autotag_for_sx00i" ] ; then
-                continue
-            fi
-            RESULT="${PART}"
-            break
-        fi
+      if [ ${TAG} != 0 ] ; then
+	    if [ "${PART}" = "autotag_for_be" ] ; then
+	      continue
+	    fi
+	    if [ "${PART}" = "autotag_for_sx00i" ] ; then
+	      continue
+	    fi
+	    RESULT="${PART}"
+	    break
+      fi
 
-        if [ ${BRANCH} != 0 ] ; then
-            if [ -z "${RESULT}" ] ; then
-                RESULT="${PART}"
-            else
-                RESULT="${RESULT}-${PART}"
-            fi
-            break
+      if [ ${BRANCH} != 0 ] ; then
+        if [ -z ${RESULT} ] ; then
+          RESULT="${PART}"
+        else
+          RESULT="${RESULT}-${PART}"
         fi
+	    break
+      fi
 
-        if [ ${TEAM} != 0 ] ; then
-            if [ -z "${RESULT}" ] ; then
-                RESULT="${PART}"
-            else
-                RESULT="${RESULT}-${PART}"
-            fi
-            continue
+      if [ ${TEAM} != 0 ] ; then
+        if [ -z ${RESULT} ] ; then
+           RESULT="${PART}"
+        else
+          RESULT="${RESULT}-${PART}"
         fi
+        continue
+      fi
 
-        if [ "${PART}" = "branches" ] ; then
-            BRANCH=1
-            RESULT="branch"
-            continue
-        fi
+      if [ "${PART}" = "branches" ] ; then
+        BRANCH=1
+        RESULT="branch"
+        continue
+      fi
 
-        if [ "${PART}" = "tags" ] ; then
-            TAG=1
-            continue
-        fi
+      if [ "${PART}" = "tags" ] ; then
+        TAG=1
+        continue
+      fi
 
-        if [ "${PART}" = "team" ] ; then
-            TEAM=1
-            continue
-        fi
+      if [ "${PART}" = "team" ] ; then
+        TEAM=1
+        continue
+      fi
     done
 
     if [ ${TAG} != 0 ] ; then
-        echo ${RESULT}
+	echo ${RESULT}
     else
-        echo SVN-${RESULT}-r${REV}${BASE:+-${BASE}}
+	echo SVN-${RESULT}-r${REV}${BASE:+-${BASE}}
     fi
-else
-    echo "UNKNOWN__and_probably_unsupported"
 fi

libpri.h

@@ -64,23 +64,23 @@
 
 /* PRI D-Channel Events */
 #define PRI_EVENT_DCHAN_UP		 1	/* D-channel is up */
-#define PRI_EVENT_DCHAN_DOWN	 2	/* D-channel is down */
+#define PRI_EVENT_DCHAN_DOWN 	 2	/* D-channel is down */
 #define PRI_EVENT_RESTART		 3	/* B-channel is restarted */
 #define PRI_EVENT_CONFIG_ERR 	 4	/* Configuration Error Detected */
-#define PRI_EVENT_RING			 5	/* Incoming call (SETUP) */
-#define PRI_EVENT_HANGUP		 6	/* Call got hung up (RELEASE/RELEASE_COMPLETE/other) */
-#define PRI_EVENT_RINGING		 7	/* Call is ringing (ALERTING) */
-#define PRI_EVENT_ANSWER		 8	/* Call has been answered (CONNECT) */
+#define PRI_EVENT_RING			 5	/* Incoming call */
+#define PRI_EVENT_HANGUP		 6	/* Call got hung up */
+#define PRI_EVENT_RINGING		 7	/* Call is ringing (alerting) */
+#define PRI_EVENT_ANSWER		 8	/* Call has been answered */
 #define PRI_EVENT_HANGUP_ACK	 9	/* Call hangup has been acknowledged */
-#define PRI_EVENT_RESTART_ACK	10	/* Restart complete on a given channel (RESTART_ACKNOWLEDGE) */
+#define PRI_EVENT_RESTART_ACK	10	/* Restart complete on a given channel */
 #define PRI_EVENT_FACNAME		11	/* Caller*ID Name received on Facility */
-#define PRI_EVENT_INFO_RECEIVED 12	/* Additional info (digits) received (INFORMATION) */
-#define PRI_EVENT_PROCEEDING	13	/* When we get CALL_PROCEEDING */
+#define PRI_EVENT_INFO_RECEIVED 12	/* Additional info (keypad) received */
+#define PRI_EVENT_PROCEEDING	13	/* When we get CALL_PROCEEDING or PROGRESS */
 #define PRI_EVENT_SETUP_ACK		14	/* When we get SETUP_ACKNOWLEDGE */
-#define PRI_EVENT_HANGUP_REQ	15	/* Requesting the higher layer to hangup (DISCONNECT) */
-#define PRI_EVENT_NOTIFY		16	/* Notification received (NOTIFY) */
-#define PRI_EVENT_PROGRESS		17	/* When we get PROGRESS */
-#define PRI_EVENT_KEYPAD_DIGIT	18	/* When we receive during ACTIVE state (INFORMATION) */
+#define PRI_EVENT_HANGUP_REQ	15	/* Requesting the higher layer to hangup */
+#define PRI_EVENT_NOTIFY		16	/* Notification received */
+#define PRI_EVENT_PROGRESS		17	/* When we get CALL_PROCEEDING or PROGRESS */
+#define PRI_EVENT_KEYPAD_DIGIT		18	/* When we receive during ACTIVE state */
 
 /* Simple states */
 #define PRI_STATE_DOWN		0
@@ -595,7 +595,7 @@ int pri_setup(struct pri *pri, q931_call *call, struct pri_sr *req);
 /* Set a call has a call indpendent signalling connection (i.e. no bchan) */
 int pri_sr_set_connection_call_independent(struct pri_sr *req);
 
-/* Send an MWI indication to a remote location.  If activate is non zero, activates, if zero, deactivates */
+/* Send an MWI indication to a remote location.  If activate is non zero, activates, if zero, decativates */
 int pri_mwi_activate(struct pri *pri, q931_call *c, char *caller, int callerplan, char *callername, int callerpres, char *called, int calledplan);
 
 /* Send an MWI deactivate request to a remote location */

pri_facility.c

@@ -1289,15 +1289,15 @@ int qsig_cf_callrerouting(struct pri *pri, q931_call *c, const char* dest, const
 	/* pSS1InfoElement */
 	ASN1_ADD_SIMPLE(comp, (ASN1_APPLICATION | ASN1_TAG_0 ), buffer, i);
 	ASN1_PUSH(compstk, compsp, comp);
-	buffer[i++] = (0x04);	/* Bearer Capability IE */
-	buffer[i++] = (0x03);	/* len */
-	buffer[i++] = (0x80);	/* ETSI Standard, Speech */
-	buffer[i++] = (0x90);	/* circuit mode, 64kbit/s */
-	buffer[i++] = (0xa3);	/* level1 protocol, a-law */
-	buffer[i++] = (0x95);	/* locking shift to codeset 5 (national use) */
-	buffer[i++] = (0x32);	/* Unknown ie */
-	buffer[i++] = (0x01);	/* Unknown ie len */
-	buffer[i++] = (0x81);	/* Unknown ie body */
+	buffer[i++] = (0x04); /*  add BC */
+	buffer[i++] = (0x03);
+	buffer[i++] = (0x80);
+	buffer[i++] = (0x90);
+	buffer[i++] = (0xa3);
+	buffer[i++] = (0x95);
+	buffer[i++] = (0x32);
+	buffer[i++] = (0x01);
+	buffer[i++] = (0x81);
 	ASN1_FIXUP(compstk, compsp, buffer, i);
 
 	/* lastReroutingNr [1]*/
@@ -1425,6 +1425,7 @@ int anfpr_initiate_transfer(struct pri *pri, q931_call *c1, q931_call *c2)
 	
 	/* Channel 1 */
 	buffer[i++] = (ASN1_CONTEXT_SPECIFIC | Q932_PROTOCOL_EXTENSIONS);
+	/* Interpretation component */
 	
 	ASN1_ADD_SIMPLE(comp, COMP_TYPE_NFE, buffer, i);
 	ASN1_PUSH(compstk, compsp, comp);
@@ -1432,7 +1433,6 @@ int anfpr_initiate_transfer(struct pri *pri, q931_call *c1, q931_call *c2)
 	ASN1_ADD_BYTECOMP(comp, (ASN1_CONTEXT_SPECIFIC | ASN1_TAG_2), buffer, i, 0);
 	ASN1_FIXUP(compstk, compsp, buffer, i);
 	
-	/* Interpretation component */
 	ASN1_ADD_BYTECOMP(comp, COMP_TYPE_INTERPRETATION, buffer, i, 2);    /* reject - to get feedback from QSIG switch */
 	
 	ASN1_ADD_SIMPLE(comp, COMP_TYPE_INVOKE, buffer, i);
@@ -1447,22 +1447,15 @@ int anfpr_initiate_transfer(struct pri *pri, q931_call *c1, q931_call *c2)
 	
 	ASN1_ADD_SIMPLE(comp, (ASN1_SEQUENCE | ASN1_CONSTRUCTOR), buffer, i);
 	ASN1_PUSH(compstk, compsp, comp);
-	buffer[i++] = (0x0a);/* Enumeration endDesignation */
-	buffer[i++] = (0x01);/* Len */
-	buffer[i++] = (0x00);/* primaryEnd */
-	buffer[i++] = (0x81);/* redirectionNumber = presentationRestricted */
-	buffer[i++] = (0x00);/* Len */
-	buffer[i++] = (0x0a);/* Enumeration callStatus */
-	buffer[i++] = (0x01);/* Len */
-	buffer[i++] = (0x01);/* alerting */
-
-	/*
-	 * Where does this element come from?  It is not in Q.SIG ECMA-178.
-	 * We send this but we will not accept it.
-	 * This seems to be a cut and paste error from eect_initiate_transfer().
-	 */
+	buffer[i++] = (0x0a);
+	buffer[i++] = (0x01);
+	buffer[i++] = (0x00);
+	buffer[i++] = (0x81);
+	buffer[i++] = (0x00);
+	buffer[i++] = (0x0a);
+	buffer[i++] = (0x01);
+	buffer[i++] = (0x01);
 	ASN1_ADD_WORDCOMP(comp, ASN1_INTEGER, buffer, i, call_reference);
-
 	ASN1_FIXUP(compstk, compsp, buffer, i);
 	ASN1_FIXUP(compstk, compsp, buffer, i);
 	
@@ -1487,6 +1480,7 @@ int anfpr_initiate_transfer(struct pri *pri, q931_call *c1, q931_call *c2)
 	compsp = 0;
 	
 	buffer2[i++] = (ASN1_CONTEXT_SPECIFIC | Q932_PROTOCOL_EXTENSIONS);
+	/* Interpretation component */
 	
 	ASN1_ADD_SIMPLE(comp, COMP_TYPE_NFE, buffer2, i);
 	ASN1_PUSH(compstk, compsp, comp);
@@ -1494,7 +1488,6 @@ int anfpr_initiate_transfer(struct pri *pri, q931_call *c1, q931_call *c2)
 	ASN1_ADD_BYTECOMP(comp, (ASN1_CONTEXT_SPECIFIC | ASN1_TAG_2), buffer2, i, 0);
 	ASN1_FIXUP(compstk, compsp, buffer2, i);
 	
-	/* Interpretation component */
 	ASN1_ADD_BYTECOMP(comp, COMP_TYPE_INTERPRETATION, buffer2, i, 2);  /* reject */
 	
 	ASN1_ADD_SIMPLE(comp, COMP_TYPE_INVOKE, buffer2, i);
@@ -1509,22 +1502,15 @@ int anfpr_initiate_transfer(struct pri *pri, q931_call *c1, q931_call *c2)
 	
 	ASN1_ADD_SIMPLE(comp, (ASN1_SEQUENCE | ASN1_CONSTRUCTOR), buffer2, i);
 	ASN1_PUSH(compstk, compsp, comp);
-	buffer2[i++] = (0x0a);/* Enumeration endDesignation */
-	buffer2[i++] = (0x01);/* Len */
-	buffer2[i++] = (0x01);/* secondaryEnd */
-	buffer2[i++] = (0x81);/* redirectionNumber = presentationRestricted */
-	buffer2[i++] = (0x00);/* Len */
-	buffer2[i++] = (0x0a);/* Enumeration callStatus */
-	buffer2[i++] = (0x01);/* Len */
-	buffer2[i++] = (0x01);/* alerting */
-
-	/*
-	 * Where does this element come from?  It is not in Q.SIG ECMA-178.
-	 * We send this but we will not accept it.
-	 * This seems to be a cut and paste error from eect_initiate_transfer().
-	 */
+	buffer2[i++] = (0x0a);
+	buffer2[i++] = (0x01);
+	buffer2[i++] = (0x01);
+	buffer2[i++] = (0x81);
+	buffer2[i++] = (0x00);
+	buffer2[i++] = (0x0a);
+	buffer2[i++] = (0x01);
+	buffer2[i++] = (0x01);
 	ASN1_ADD_WORDCOMP(comp, ASN1_INTEGER, buffer2, i, call_reference);
-
 	ASN1_FIXUP(compstk, compsp, buffer2, i);
 	ASN1_FIXUP(compstk, compsp, buffer2, i);
 	
@@ -2281,7 +2267,7 @@ int rose_reject_decode(struct pri *pri, q931_call *call, q931_ie *ie, unsigned c
 
 			return 0;
 		} else {
-			pri_message(pri, "Unable to handle reject on switchtype %d!\n", pri->switchtype);
+			pri_message(pri, "Unable to handle return result on switchtype %d!\n", pri->switchtype);
 			return -1;
 		}
 
@@ -2344,7 +2330,8 @@ int rose_return_error_decode(struct pri *pri, q931_call *call, q931_ie *ie, unsi
 
 			return 0;
 		} else {
-			pri_message(pri, "Unable to handle return error on switchtype %d!\n", pri->switchtype);
+			pri_message(pri, "Unable to handle return result on switchtype %d!\n", pri->switchtype);
+			return -1;
 		}
 
 	} while(0);

q921.c

@@ -268,31 +268,12 @@ static void reschedule_t203(struct pri *pri)
 	pri->t203_timer = pri_schedule_event(pri, pri->timers[PRI_TIMER_T203], t203_expire, pri);
 }
 
-static void q921_send_queued_iframes(struct pri *pri)
-{
-	struct q921_frame *f;
-
-	f = pri->txqueue;
-	while(f && (pri->windowlen < pri->window)) {
-		if (!f->transmitted) {
-			/* Send it now... */
-			if (pri->debug & PRI_DEBUG_Q921_DUMP)
-				pri_message(pri, "-- Finally transmitting %d, since window opened up (%d)\n", f->h.n_s, pri->windowlen);
-			f->transmitted++;
-			pri->windowlen++;
-			f->h.n_r = pri->v_r;
-			f->h.p_f = 0;
-			q921_transmit(pri, (q921_h *)(&f->h), f->len);
-		}
-		f = f->next;
-	}
-}
-
 static pri_event *q921_ack_rx(struct pri *pri, int ack, int send_untransmitted_frames)
 {
 	int x;
 	int cnt=0;
 	pri_event *ev;
+	struct q921_frame *f;
 	/* Make sure the ACK was within our window */
 	for (x=pri->v_a; (x != pri->v_s) && (x != ack); Q921_INC(x));
 	if (x != ack) {
@@ -328,7 +309,20 @@ static pri_event *q921_ack_rx(struct pri *pri, int ack, int send_untransmitted_f
 		if (!pri->busy && send_untransmitted_frames) {
 			pri->retrans = 0;
 			/* Search for something to send */
-			q921_send_queued_iframes(pri);
+			f = pri->txqueue;
+			while(f && (pri->windowlen < pri->window)) {
+				if (!f->transmitted) {
+					/* Send it now... */
+					if (pri->debug & PRI_DEBUG_Q921_DUMP)
+						pri_message(pri, "-- Finally transmitting %d, since window opened up (%d)\n", f->h.n_s, pri->windowlen);
+					f->transmitted++;
+					pri->windowlen++;
+					f->h.n_r = pri->v_r;
+					f->h.p_f = 0;
+					q921_transmit(pri, (q921_h *)(&f->h), f->len);
+				}
+				f = f->next;
+			}
 		}
 		if (pri->debug & PRI_DEBUG_Q921_DUMP)
 			pri_message(pri, "-- Waiting for acknowledge, restarting T200 counter\n");		
@@ -521,9 +515,11 @@ int q921_transmit_iframe(struct pri *pri, void *buf, int len, int cr)
 			pri->txqueue = f;
 		/* Immediately transmit unless we're in a recovery state, or the window
 		   size is too big */
-		if ((pri->q921_state == Q921_LINK_CONNECTION_ESTABLISHED) && (!pri->retrans && !pri->busy)) {
+		if (!pri->retrans && !pri->busy) {
 			if (pri->windowlen < pri->window) {
-				q921_send_queued_iframes(pri);
+				pri->windowlen++;
+				q921_transmit(pri, (q921_h *)(&f->h), f->len);
+				f->transmitted++;
 			} else {
 				if (pri->debug & PRI_DEBUG_Q921_DUMP)
 					pri_message(pri, "Delaying transmission of %d, window is %d/%d long\n", 
@@ -536,14 +532,9 @@ int q921_transmit_iframe(struct pri *pri, void *buf, int len, int cr)
 			pri_schedule_del(pri, pri->t203_timer);
 			pri->t203_timer = 0;
 		}
-
-		/* Check this so that we don't try to send frames while multi frame mode is down */
-		if (pri->q921_state == Q921_LINK_CONNECTION_ESTABLISHED) {
-			if (pri->debug & PRI_DEBUG_Q921_DUMP)
-				pri_message(pri, "Starting T_200 timer\n");
-
-			reschedule_t200(pri);		
-		}
+		if (pri->debug & PRI_DEBUG_Q921_DUMP)
+			pri_message(pri, "Starting T_200 timer\n");
+		reschedule_t200(pri);		
 	} else {
 		pri_error(pri, "!! Out of memory for Q.921 transmit\n");
 		return -1;
@@ -581,7 +572,7 @@ static pri_event *q921_handle_iframe(struct pri *pri, q921_i *i, int len)
 		Q921_INC(pri->v_r);
 		/* Handle their ACK */
 		pri->sentrej = 0;
-		ev = q921_ack_rx(pri, i->n_r, 1);
+		ev = q921_ack_rx(pri, i->n_r, 0);
 		if (ev)
 			return ev;
 		if (i->p_f) {
@@ -785,6 +776,9 @@ void q921_dump(struct pri *pri, q921_h *h, int len, int showraw, int txrx)
 
 static pri_event *q921_dchannel_up(struct pri *pri)
 {
+	/* Reset counters, etc */
+	q921_reset(pri);
+	
 	/* Stop any SABME retransmissions */
 	if (pri->sabme_timer) {
 		pri_schedule_del(pri, pri->sabme_timer);
@@ -805,8 +799,6 @@ static pri_event *q921_dchannel_up(struct pri *pri)
 	/* Notify Layer 3 */
 	q931_dl_indication(pri, PRI_EVENT_DCHAN_UP);
 
-	q921_send_queued_iframes(pri);
-
 	/* Report event that D-Channel is now up */
 	pri->ev.gen.e = PRI_EVENT_DCHAN_UP;
 	return &pri->ev;

q931.c

@@ -825,12 +825,6 @@ static FUNC_SEND(transmit_bearer_capability)
 		/* Apparently EuroISDN switches don't seem to like user layer 2/3 */
 		return 4;
 	}
-
-	if ((tc & PRI_TRANS_CAP_DIGITAL) && (call->transmoderate == TRANS_MODE_64_CIRCUIT)) {
-		/* Unrestricted digital 64k data calls don't use user layer 2/3 */
-		return 4;
-	}
-
 	if (call->transmoderate != TRANS_MODE_PACKET) {
 		/* If you have an AT&T 4ESS, you don't send any more info */
 		if ((pri->switchtype != PRI_SWITCH_ATT4ESS) && (call->userl1 > -1)) {