84b2560da5
If the network stops responding, according to Q.921 we are supposed to
remove the TEI. With the layer2_persistence option enabled, we are
supposed to keep trying to bring layer 2 back up. Unfortunately, when the
network stops responding, we stopped the restart timer and removed the
TEI. As a result, layer 2 does not immediately come back up.
* Made not stop the restart timer if we are removing the TEI on the CPE
side. Also handle the timer expiration in relevant unassigned TEI states.
(closes issue LIBPRI-72)
Reported by: Trey Blancher
Patches:
jira_dahdi_1001_libpri_v1.4.patch (license #5621) patch uploaded by rmudgett
git-svn-id: https://origsvn.digium.com/svn/libpri/branches/1.4@2315 2fbb986a-6c06-0410-b554-c9c1f0a7f128
libpri: An implementation of Primary Rate ISDN Written by Mark Spencer <markster@digium.com> What is libpri? =============== libpri is a C implementation of the Primary Rate ISDN specification. It was based on the Bellcore specification SR-NWT-002343 for National ISDN. As of May 12, 2001, it has been tested work with NI-2, Nortel DMS-100, and Lucent 5E Custom protocols on switches from Nortel and Lucent. What is the license for libpri? =============================== libpri is distributed under the terms of the GNU General Public License, which permit its use and linking with other GPL'd software only. The GNU GPL is included in the file LICENSE in this directory. As a special exception, libpri may also be linked to the OpenH323 library, so long as the entirity of the derivative work (as defined within the GPL) is licensed either under the MPL of the OpenH323 license or the GPL of libpri. If you wish to use libpri in an application for which the GPL is not appropriate (e.g. a proprietary embedded system), licenses for libpri under more flexible terms can be readily obtained through Digium, Inc. at reasonable cost. How do I report bugs or contribute? =================================== For now, contact the author directly. In the future if there is sufficient interest, we will setup a mailing list. Does anything use this library so far? ====================================== Yes, the Asterisk Open Source PBX does. http://www.asterisk.org Also, the Zapata library has hooks for it. http://www.zapatatelephony.org Special thanks ============== Special thanks to Jim Dixon <jim@lambdatel.com> for his help in testing and fixing the implementation.